aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-47/+26
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <[email protected]>
2021-04-17Merge tag 'net-5.12-rc8' of ↵Linus Torvalds7-37/+19
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.12-rc8, including fixes from netfilter, and bpf. BPF verifier changes stand out, otherwise things have slowed down. Current release - regressions: - gro: ensure frag0 meets IP header alignment - Revert "net: stmmac: re-init rx buffers when mac resume back" - ethernet: macb: fix the restore of cmp registers Previous releases - regressions: - ixgbe: Fix NULL pointer dereference in ethtool loopback test - ixgbe: fix unbalanced device enable/disable in suspend/resume - phy: marvell: fix detection of PHY on Topaz switches - make tcp_allowed_congestion_control readonly in non-init netns - xen-netback: Check for hotplug-status existence before watching Previous releases - always broken: - bpf: mitigate a speculative oob read of up to map value size by tightening the masking window - sctp: fix race condition in sctp_destroy_sock - sit, ip6_tunnel: Unregister catch-all devices - netfilter: nftables: clone set element expression template - netfilter: flowtable: fix NAT IPv6 offload mangling - net: geneve: check skb is large enough for IPv4/IPv6 header - netlink: don't call ->netlink_bind with table lock held" * tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) netlink: don't call ->netlink_bind with table lock held MAINTAINERS: update my email bpf: Update selftests to reflect new error states bpf: Tighten speculative pointer arithmetic mask bpf: Move sanitize_val_alu out of op switch bpf: Refactor and streamline bounds check into helper bpf: Improve verifier error messages for users bpf: Rework ptr_limit into alu_limit and add common error path bpf: Ensure off_reg has no mixed signed bounds for all types bpf: Move off_reg into sanitize_ptr_alu bpf: Use correct permission flag for mixed signed bounds arithmetic ch_ktls: do not send snd_una update to TCB in middle ch_ktls: tcb close causes tls connection failure ch_ktls: fix device connection close ch_ktls: Fix kernel panic i40e: fix the panic when running bpf in xdpdrv mode net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta net/mlx5e: Fix setting of RS FEC mode net/mlx5: Fix setting of devlink traps in switchdev mode Revert "net: stmmac: re-init rx buffers when mac resume back" ...
2021-04-16ia64: tools: remove duplicate definition of ia64_mf() on ia64John Paul Adrian Glaubitz1-3/+0
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build: CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o In file included from /usr/src/linux/tools/include/asm/barrier.h:24, from /usr/src/linux/tools/include/linux/ring_buffer.h:4, from libbpf.c:37: /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror] 43 | #define ia64_mf() asm volatile ("mf" ::: "memory") | In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20, from /usr/include/ia64-linux-gnu/asm/swab.h:11, from /usr/include/linux/swab.h:8, from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/ia64-linux-gnu/asm/byteorder.h:5, from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20, from libbpf.c:36: /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition 382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory") | cc1: all warnings being treated as errors Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h. Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-04-16ia64: tools: remove inclusion of ia64-specific version of errno.h headerJohn Paul Adrian Glaubitz1-2/+0
There is no longer an ia64-specific version of the errno.h header below arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with: CC /usr/src/linux/tools/bpf/bpftool/btf_dumper.o In file included from /usr/src/linux/tools/include/linux/err.h:8, from btf_dumper.c:11: /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory 13 | #include "../../../arch/ia64/include/uapi/asm/errno.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. Thus, just remove the inclusion of the ia64-specific errno.h so that the build will use the generic errno.h header on this target which was used there anyway as the ia64-specific errno.h was just a wrapper for the generic header. Fixes: c25f867ddd00 ("ia64: remove unneeded uapi asm-generic wrappers") Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller7-37/+19
Daniel Borkmann says: ==================== pull-request: bpf 2021-04-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 9 day(s) which contain a total of 8 files changed, 175 insertions(+), 111 deletions(-). The main changes are: 1) Fix a potential NULL pointer dereference in libbpf's xsk umem handling, from Ciara Loftus. 2) Mitigate a speculative oob read of up to map value size by tightening the masking window, from Daniel Borkmann. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-04-16selftests: mptcp: add packet mark test caseFlorian Westphal3-2/+299
Extend mptcp_connect tool with SO_MARK support (-M <value>) and add a test case that checks that the packet mark gets copied to all subflows. This is done by only allowing packets with either skb->mark 1 or 2 via iptables. DROP rule packet counter is checked; if its not zero, print an error message and fail the test case. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-16bpf: Update selftests to reflect new error statesDaniel Borkmann6-35/+16
Update various selftest error messages: * The 'Rx tried to sub from different maps, paths, or prohibited types' is reworked into more specific/differentiated error messages for better guidance. * The change into 'value -4294967168 makes map_value pointer be out of bounds' is due to moving the mixed bounds check into the speculation handling and thus occuring slightly later than above mentioned sanity check. * The change into 'math between map_value pointer and register with unbounded min value' is similarly due to register sanity check coming before the mixed bounds check. * The case of 'map access: known scalar += value_ptr from different maps' now loads fine given masks are the same from the different paths (despite max map value size being different). Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-04-15bpftool: Fix a clang compilation warningYonghong Song1-1/+1
With clang compiler: make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel # build selftests/bpf or bpftool make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 make -j60 -C tools/bpf/bpftool LLVM=1 LLVM_IAS=1 the following compilation warning showed up, net.c:160:37: warning: comparison of integers of different signs: '__u32' (aka 'unsigned int') and 'int' [-Wsign-compare] for (nh = (struct nlmsghdr *)buf; NLMSG_OK(nh, len); ^~~~~~~~~~~~~~~~~ .../tools/include/uapi/linux/netlink.h:99:24: note: expanded from macro 'NLMSG_OK' (nlh)->nlmsg_len <= (len)) ~~~~~~~~~~~~~~~~ ^ ~~~ In this particular case, "len" is defined as "int" and (nlh)->nlmsg_len is "unsigned int". The macro NLMSG_OK is defined as below in uapi/linux/netlink.h. #define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ (nlh)->nlmsg_len <= (len)) The clang compiler complains the comparision "(nlh)->nlmsg_len <= (len))", but in bpftool/net.c, it is already ensured that "len > 0" must be true. So theoretically the compiler could deduce that comparison of "(nlh)->nlmsg_len" and "len" is okay, but this really depends on compiler internals. Let us add an explicit type conversion (from "int" to "unsigned int") for "len" in NLMSG_OK to silence this warning right now. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-15selftests/bpf: Silence clang compilation warningsYonghong Song3-4/+9
With clang compiler: make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 Some linker flags are not used/effective for some binaries and we have warnings like: warning: -lelf: 'linker' input unused [-Wunused-command-line-argument] We also have warnings like: .../selftests/bpf/prog_tests/ns_current_pid_tgid.c:74:57: note: treat the string as an argument to avoid this if (CHECK(waitpid(cpid, &wstatus, 0) == -1, "waitpid", strerror(errno))) ^ "%s", .../selftests/bpf/test_progs.h:129:35: note: expanded from macro 'CHECK' _CHECK(condition, tag, duration, format) ^ .../selftests/bpf/test_progs.h:108:21: note: expanded from macro '_CHECK' fprintf(stdout, ##format); \ ^ The first warning can be silenced with clang option -Wno-unused-command-line-argument. For the second warning, source codes are modified as suggested by the compiler to silence the warning. Since gcc does not support the option -Wno-unused-command-line-argument and the warning only happens with clang compiler, the option -Wno-unused-command-line-argument is enabled only when clang compiler is used. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-15selftests/bpf: Fix test_cpp compilation failure with clangYonghong Song1-1/+1
With clang compiler: make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 the test_cpp build failed due to the failure: warning: treating 'c-header' input as 'c++-header' when in C++ mode, this behavior is deprecated [-Wdeprecated] clang-13: error: cannot specify -o when generating multiple output files test_cpp compilation flag looks like: clang++ -g -Og -rdynamic -Wall -I<...> ... \ -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program \ test_cpp.cpp <...>/test_core_extern.skel.h <...>/libbpf.a <...>/test_stub.o \ -lcap -lelf -lz -lrt -lpthread -o <...>/test_cpp The clang++ compiler complains the header file in the command line and also failed the compilation due to this. Let us remove the header file from the command line which is not intended any way, and this fixed the compilation problem. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-15tools: Allow proper CC/CXX/... override with LLVM=1 in Makefile.includeYonghong Song1-2/+10
selftests/bpf/Makefile includes tools/scripts/Makefile.include. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed the case if CC/AR/LD/CXX/STRIP is allowed to be overridden, it will be written to clang/llvm-ar/..., instead of gcc binaries. The definition of CC_NO_CLANG is also relocated to the place after the above CC is defined. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-15selftests: Set CC to clang in lib.mk if LLVM is setYonghong Song1-0/+4
selftests/bpf/Makefile includes lib.mk. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed lib.mk issue which sets CC to gcc in all cases. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-15libbpf: Remove unused field.Alexei Starovoitov1-14/+1
relo->processed is set, but not used. Remove it. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-14tools/testing: Remove unused variablezuoqilin1-1/+1
Remove unused variable "ret2". Signed-off-by: zuoqilin <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-14selftests/bpf: Fix the ASSERT_ERR_PTR macroFlorent Revest1-1/+1
It is just missing a ';'. This macro is not used by any test yet. Fixes: 22ba36351631 ("selftests/bpf: Move and extend ASSERT_xxx() testing macros") Signed-off-by: Florent Revest <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-13selftests/bpf: Add tests for target information in bpf_link info queriesToke Høiland-Jørgensen1-14/+44
Extend the fexit_bpf2bpf test to check that the info for the bpf_link returned by the kernel matches the expected values. While we're updating the test, change existing uses of CHEC() to use the much easier to read ASSERT_*() macros. v2: - Convert last CHECK() call and get rid of 'duration' var - Split ASSERT_OK_PTR() checks to two separate if statements Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-13bpf: Return target info when a tracing bpf_link is queriedToke Høiland-Jørgensen1-0/+2
There is currently no way to discover the target of a tracing program attachment after the fact. Add this information to bpf_link_info and return it when querying the bpf_link fd. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-12libbpf: Clarify flags in ringbuf helpersPedro Tammela1-0/+16
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment. For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a notification to the process if needed. Signed-off-by: Pedro Tammela <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-12bpf: Sync bpf headers in tooling infrastuctureDaniel Borkmann1-5/+32
Synchronize tools/include/uapi/linux/bpf.h which was missing changes from various commits: - f3c45326ee71 ("bpf: Document PROG_TEST_RUN limitations") - e5e35e754c28 ("bpf: BPF-helper for MTU checking add length input") Signed-off-by: Daniel Borkmann <[email protected]>
2021-04-11self-tests: add veth testsPaolo Abeni2-0/+178
Add some basic veth tests, that verify the expected flags and aggregation with different setups (default, xdp, etc...) Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski23-77/+257
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <[email protected]>
2021-04-09Merge tag 'perf-tools-fixes-for-v5.12-2020-04-09' of ↵Linus Torvalds3-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool fixes from Arnaldo Carvalho de Melo: - Fix wrong LBR block sorting in 'perf report' - Fix 'perf inject' repipe usage when consuming perf.data files - Avoid potential buffer overrun when decoding ARM SPE hardware tracing packets, bug found using a fuzzer * tag 'perf-tools-fixes-for-v5.12-2020-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf arm-spe: Avoid potential buffer overrun perf report: Fix wrong LBR block sorting perf inject: Fix repipe usage
2021-04-09Merge tag 'net-5.12-rc7' of ↵Linus Torvalds5-22/+113
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.12-rc7, including fixes from can, ipsec, mac80211, wireless, and bpf trees. No scary regressions here or in the works, but small fixes for 5.12 changes keep coming. Current release - regressions: - virtio: do not pull payload in skb->head - virtio: ensure mac header is set in virtio_net_hdr_to_skb() - Revert "net: correct sk_acceptq_is_full()" - mptcp: revert "mptcp: provide subflow aware release function" - ethernet: lan743x: fix ethernet frame cutoff issue - dsa: fix type was not set for devlink port - ethtool: remove link_mode param and derive link params from driver - sched: htb: fix null pointer dereference on a null new_q - wireless: iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd() - wireless: iwlwifi: fw: fix notification wait locking - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the rtnl dependency Current release - new code bugs: - napi: fix hangup on napi_disable for threaded napi - bpf: take module reference for trampoline in module - wireless: mt76: mt7921: fix airtime reporting and related tx hangs - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending config command Previous releases - regressions: - rfkill: revert back to old userspace API by default - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets - let skb_orphan_partial wake-up waiters - xfrm/compat: Cleanup WARN()s that can be user-triggered - vxlan, geneve: do not modify the shared tunnel info when PMTU triggers an ICMP reply - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE - can: uapi: mark union inside struct can_frame packed - sched: cls: fix action overwrite reference counting - sched: cls: fix err handler in tcf_action_init() - ethernet: mlxsw: fix ECN marking in tunnel decapsulation - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx - ethernet: i40e: fix receiving of single packets in xsk zero-copy mode - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic Previous releases - always broken: - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET - bpf: Refcount task stack in bpf_get_task_stack - bpf, x86: Validate computation of branch displacements - ieee802154: fix many similar syzbot-found bugs - fix NULL dereferences in netlink attribute handling - reject unsupported operations on monitor interfaces - fix error handling in llsec_key_alloc() - xfrm: make ipv4 pmtu check honor ip header df - xfrm: make hash generation lock per network namespace - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp offload - ethtool: fix incorrect datatype in set_eee ops - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory model - openvswitch: fix send of uninitialized stack memory in ct limit reply Misc: - udp: add get handling for UDP_GRO sockopt" * tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits) net: fix hangup on napi_disable for threaded napi net: hns3: Trivial spell fix in hns3 driver lan743x: fix ethernet frame cutoff issue net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits net: dsa: lantiq_gswip: Don't use PHY auto polling net: sched: sch_teql: fix null-pointer dereference ipv6: report errors for iftoken via netlink extack net: sched: fix err handler in tcf_action_init() net: sched: fix action overwrite reference counting Revert "net: sched: bump refcount for new action in ACT replace mode" ice: fix memory leak of aRFS after resuming from suspend i40e: Fix sparse warning: missing error code 'err' i40e: Fix sparse error: 'vsi->netdev' could be null i40e: Fix sparse error: uninitialized symbol 'ring' i40e: Fix sparse errors in i40e_txrx.c i40e: Fix parameters in aq_get_phy_register() nl80211: fix beacon head validation bpf, x86: Validate computation of branch displacements for x86-32 bpf, x86: Validate computation of branch displacements for x86-64 ...
2021-04-08selftests/bpf: ringbuf_multi: Test bpf_map__set_inner_map_fdYauheni Kaliuta2-0/+25
Test map__set_inner_map_fd() interaction with map-in-map initialization. Use hashmap of maps just to make it different to existing array of maps. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: ringbuf_multi: Use runtime page sizeYauheni Kaliuta2-4/+20
Set bpf table sizes dynamically according to the runtime page size value. Do not switch to ASSERT macros, keep CHECK, for consistency with the rest of the test. Can be a separate cleanup patch. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08libbpf: Add bpf_map__inner_map APIAndrii Nakryiko3-0/+12
The API gives access to inner map for map in map types (array or hash of map). It will be used to dynamically set max_entries in it. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: ringbuf: Use runtime page sizeYauheni Kaliuta2-5/+13
Replace hardcoded 4096 with runtime value in the userspace part of the test and set bpf table sizes dynamically according to the value. Do not switch to ASSERT macros, keep CHECK, for consistency with the rest of the test. Can be a separate cleanup patch. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: mmap: Use runtime page sizeYauheni Kaliuta2-7/+19
Replace hardcoded 4096 with runtime value in the userspace part of the test and set bpf table sizes dynamically according to the value. Do not switch to ASSERT macros, keep CHECK, for consistency with the rest of the test. Can be a separate cleanup patch. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: Pass page size from userspace in map_ptrYauheni Kaliuta2-4/+15
Use ASSERT to check result but keep CHECK where format was used to report error. Use bpf_map__set_max_entries() to set map size dynamically from userspace according to page size. Zero-initialize the variable in bpf prog, otherwise it will cause problems on some versions of Clang. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: Pass page size from userspace in sockopt_skYauheni Kaliuta2-6/+6
Since there is no convenient way for bpf program to get PAGE_SIZE from inside of the kernel, pass the value from userspace. Zero-initialize the variable in bpf prog, otherwise it will cause problems on some versions of Clang. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: test_progs/sockopt_sk: Convert to use BPF skeletonYauheni Kaliuta1-48/+17
Switch the test to use BPF skeleton to save some boilerplate and make it easy to access bpf program bss segment. The latter will be used to pass PAGE_SIZE from userspace since there is no convenient way for bpf program to get it from inside of the kernel. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08selftests/bpf: test_progs/sockopt_sk: Remove versionYauheni Kaliuta1-1/+0
As pointed by Andrii Nakryiko, _version is useless now, remove it. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08libbpf: Fix potential NULL pointer dereferenceCiara Loftus1-2/+3
Wait until after the UMEM is checked for null to dereference it. Fixes: 43f1bc1efff1 ("libbpf: Restore umem state after socket create failure") Signed-off-by: Ciara Loftus <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-08tc-testing: add simple action test to verify batch change cleanupVlad Buslov1-0/+29
Verify cleanup of failed actions batch change where second action in batch fails after successful init of first action. Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-08tc-testing: add simple action test to verify batch add cleanupVlad Buslov1-0/+30
Verify cleanup of failed actions batch add where second action in batch fails after successful init of first action. Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-07selftests: mptcp: add the net device name testcaseGeliang Tang1-0/+8
This patch added a new testcase for setting the net device name. In it, pass the net device name to pm_nl_ctl to set the ifindex field of struct mptcp_pm_addr_entry. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-07perf arm-spe: Avoid potential buffer overrunIan Rogers1-1/+3
SPE extended headers are > 1 byte so ensure the buffer contains at least this before reading. This issue was detected by fuzzing. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andre Przywara <[email protected]> Cc: Dave Martin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-04-07perf report: Fix wrong LBR block sortingJin Yao1-3/+3
When '--total-cycles' is specified, it supports sorting for all blocks by 'Sampled Cycles%'. This is useful to concentrate on the globally hottest blocks. 'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles But in current code, it doesn't use the cycles aggregation. Part of 'cycles' counting is possibly dropped for some overlap jumps. But for identifying the hot block, we always need the full cycles. # perf record -b ./triad_loop # perf report --total-cycles --stdio Before: # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ............................................................. ................. # 0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so 0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms] 0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms] 0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms] 0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms] 0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms] 0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms] 0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms] 0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms] 0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms] 0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so ... 0.00% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop The hottest block '[triad_loop.c:64 -> triad_loop.c:65]' is not at the top of output. After: # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... .............................................................. ................. # 94.35% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop 0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so 0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms] 0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms] 0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms] 0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms] 0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms] 0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms] 0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms] 0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms] 0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms] 0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so 0.08% 82 0.06% 11 [intel_pmu_drain_pebs_nhm+580 -> intel_pmu_drain_pebs_nhm+627] [kernel.kallsyms] 0.08% 77 0.42% 77 [lru_add_drain_cpu+0 -> lru_add_drain_cpu+133] [kernel.kallsyms] 0.08% 74 0.10% 18 [handle_pmi_common+271 -> handle_pmi_common+310] [kernel.kallsyms] 0.08% 74 0.40% 74 [get-dynamic-info.h:131 -> get-dynamic-info.h:157] ld-2.27.so 0.07% 69 0.09% 17 [intel_pmu_drain_pebs_nhm+432 -> intel_pmu_drain_pebs_nhm+468] [kernel.kallsyms] Now the hottest block is reported at the top of output. Fixes: b65a7d372b1a55db ("perf hist: Support block formats with compare/sort/display") Signed-off-by: Jin Yao <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-04-05libbpf: Fix KERNEL_VERSION macroHengqi Chen1-1/+1
Add missing ')' for KERNEL_VERSION macro. Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-05perf inject: Fix repipe usageAdrian Hunter1-1/+1
Since commit 14d3d54052539a1e ("perf session: Try to read pipe data from file") 'perf inject' has started printing "PERFILE2h" when not processing pipes. The commit exposed perf to the possiblity that the input is not a pipe but the 'repipe' parameter gets used. That causes the printing because perf inject sets 'repipe' to true always. The 'repipe' parameter of perf_session__new() is used by 2 functions: - perf_file_header__read_pipe() - trace_report() In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is true. Fix by setting 'repipe' to true only if the output is a pipe. Fixes: e558a5bd8b74aff4 ("perf inject: Work with files") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andrew Vagin <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-04-03bpf: selftests: Specify CONFIG_DYNAMIC_FTRACE in the testing configMartin KaFai Lau1-0/+2
The tracing test and the recent kfunc call test require CONFIG_DYNAMIC_FTRACE. This patch adds it to the config file. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-03libbpf: Remove redundant semi-colonYang Yingliang1-1/+1
Remove redundant semi-colon in finalize_btf_ext(). Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-03bpf, selftests: test_maps generating unrecognized data sectionJohn Fastabend1-12/+0
With a relatively recent clang master branch test_map skips a section, libbpf: elf: skipping unrecognized data section(5) .rodata.str1.1 the cause is some pointless strings from bpf_printks in the BPF program loaded during testing. After just removing the prints to fix above error Daniel points out the program is a bit pointless and could be simply the empty program returning SK_PASS. Here we do just that and return simply SK_PASS. This program is used with test_maps selftests to test insert/remove of a program into the sockmap and sockhash maps. Its not testing actual functionality of the TCP sockmap programs, these are tested from test_sockmap. So we shouldn't lose in test coverage and fix above warnings. This original test was added before test_sockmap existed and has been copied around ever since, clean it up now. Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/161731595664.74613.1603087410166945302.stgit@john-XPS-13-9370
2021-04-02selftests: mptcp: dump more info on mpjoin errorsMatthieu Baerts1-2/+15
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once! Here we provide more details in case of errors with mptcp_join.sh script like it was done with mptcp_connect.sh, see commit 767389c8dd55 ("selftests: mptcp: dump more info on errors") Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-02selftests: mptcp: init nstat historyMatthieu Baerts1-0/+7
Not to be impacted by packets sent between sub-tests. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-02selftests: mptcp: launch mptcp_connect with timeoutMatthieu Baerts4-33/+72
'mptcp_connect' already has a timeout for poll() but in some cases, it is not enough. With "timeout" tool, we will force the command to fail if it doesn't finish on time. Thanks to that, the script will continue and display details about the current state before marking the test as failed. Displaying this state is very important to be able to understand the issue. Best to have our CI reporting the issue than just "the test hanged". Note that in mptcp_connect.sh, we were using a long timeout to validate the fact we cannot create a socket if a sysctl is set. We don't need this timeout. In diag.sh, we want to send signals to mptcp_connect instances that have been started in the netns. But we cannot send this signal to 'timeout' otherwise that will stop the timeout and messages telling us SIGUSR1 has been received will be printed. Instead of trying to find the right PID and storing them in an array, we can simply use the output of 'ip netns pids' which is all the PIDs we want to send signal to. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160 Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller28-668/+1496
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-04-01 The following pull-request contains BPF updates for your *net-next* tree. We've added 68 non-merge commits during the last 7 day(s) which contain a total of 70 files changed, 2944 insertions(+), 1139 deletions(-). The main changes are: 1) UDP support for sockmap, from Cong. 2) Verifier merge conflict resolution fix, from Daniel. 3) xsk selftests enhancements, from Maciej. 4) Unstable helpers aka kernel func calling, from Martin. 5) Batches ops for LPM map, from Pedro. 6) Fix race in bpf_get_local_storage, from Yonghong. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-21/+101
Alexei Starovoitov says: ==================== pull-request: bpf 2021-04-01 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 8 day(s) which contain a total of 10 files changed, 151 insertions(+), 26 deletions(-). The main changes are: 1) xsk creation fixes, from Ciara. 2) bpf_get_task_stack fix, from Dave. 3) trampoline in modules fix, from Jiri. 4) bpf_obj_get fix for links and progs, from Lorenz. 5) struct_ops progs must be gpl compatible fix, from Toke. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-04-01libbpf: Only create rx and tx XDP rings when necessaryCiara Loftus1-2/+11
Prior to this commit xsk_socket__create(_shared) always attempted to create the rx and tx rings for the socket. However this causes an issue when the socket being setup is that which shares the fd with the UMEM. If a previous call to this function failed with this socket after the rings were set up, a subsequent call would always fail because the rings are not torn down after the first call and when we try to set them up again we encounter an error because they already exist. Solve this by remembering whether the rings were set up by introducing new bools to struct xsk_umem which represent the ring setup status and using them to determine whether or not to set up the rings. Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Ciara Loftus <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-01libbpf: Restore umem state after socket create failureCiara Loftus1-18/+23
If the call to xsk_socket__create fails, the user may want to retry the socket creation using the same umem. Ensure that the umem is in the same state on exit if the call fails by: 1. ensuring the umem _save pointers are unmodified. 2. not unmapping the set of umem rings that were set up with the umem during xsk_umem__create, since those maps existed before the call to xsk_socket__create and should remain in tact even in the event of failure. Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices") Signed-off-by: Ciara Loftus <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.