aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-01-13selftests/bpf: Add verifier test for PTR_TO_MEM spillGilad Reti2-1/+41
Add a test to check that the verifier is able to recognize spilling of PTR_TO_MEM registers, by reserving a ringbuf buffer, forcing the spill of a pointer holding the buffer address to the stack, filling it back in from the stack and writing to the memory area pointed by it. The patch was partially contributed by CyberArk Software, Inc. Signed-off-by: Gilad Reti <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-13objtool: Don't add empty symbols to the rbtreeJosh Poimboeuf1-0/+7
Building with the Clang assembler shows the following warning: arch/x86/kernel/ftrace_64.o: warning: objtool: missing symbol for insn at offset 0x16 The Clang assembler strips section symbols. That ends up giving objtool's find_func_containing() much more test coverage than normal. Turns out, find_func_containing() doesn't work so well for overlapping symbols: 2: 000000000000000e 0 NOTYPE LOCAL DEFAULT 2 fgraph_trace 3: 000000000000000f 0 NOTYPE LOCAL DEFAULT 2 trace 4: 0000000000000000 165 FUNC GLOBAL DEFAULT 2 __fentry__ 5: 000000000000000e 0 NOTYPE GLOBAL DEFAULT 2 ftrace_stub The zero-length NOTYPE symbols are inside __fentry__(), confusing the rbtree search for any __fentry__() offset coming after a NOTYPE. Try to avoid this problem by not adding zero-length symbols to the rbtree. They're rare and aren't needed in the rbtree anyway. One caveat, this actually might not end up being the right fix. Non-empty overlapping symbols, if they exist, could have the same problem. But that would need bigger changes, let's see if we can get away with the easy fix for now. Reported-by: Arnd Bergmann <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]>
2021-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski1-3/+9
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Pass conntrack -f to specify family in netfilter conntrack helper selftests, from Chen Yi. 2) Honor hashsize modparam from nf_conntrack_buckets sysctl, from Jesper D. Brouer. 3) Fix memleak in nf_nat_init() error path, from Dinghao Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nf_nat: Fix memleak in nf_nat_init netfilter: conntrack: fix reading nf_conntrack_buckets selftests: netfilter: Pass family parameter "-f" to conntrack tool ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-12libbpf: Allow loading empty BTFsAndrii Nakryiko1-5/+0
Empty BTFs do come up (e.g., simple kernel modules with no new types and strings, compared to the vmlinux BTF) and there is nothing technically wrong with them. So remove unnecessary check preventing loading empty BTFs. Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF") Reported-by: Christopher William Snowhill <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-12bpf: Update local storage test to check handling of null ptrsKP Singh2-97/+61
It was found in [1] that bpf_inode_storage_get helper did not check the nullness of the passed owner ptr which caused an oops when dereferenced. This change incorporates the example suggested in [1] into the local storage selftest. The test is updated to create a temporary directory instead of just using a tempfile. In order to replicate the issue this copied rm binary is renamed tiggering the inode_rename with a null pointer for the new_inode. The logic to verify the setting and deletion of the inode local storage of the old inode is also moved to this LSM hook. The change also removes the copy_rm function and simply shells out to copy files and recursively delete directories and consolidates the logic of setting the initial inode storage to the bprm_committed_creds hook and removes the file_open hook. [1]: https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com Suggested-by: Gilad Reti <[email protected]> Signed-off-by: KP Singh <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-10selftests: netfilter: Pass family parameter "-f" to conntrack toolChen Yi1-3/+9
Fix nft_conntrack_helper.sh false fail report: 1) Conntrack tool need "-f ipv6" parameter to show out ipv6 traffic items. 2) Sleep 1 second after background nc send packet, to make sure check is after this statement executed. False report: FAIL: ns1-lkjUemYw did not show attached helper ip set via ruleset PASS: ns1-lkjUemYw connection on port 2121 has ftp helper attached ... After fix: PASS: ns1-2hUniwU2 connection on port 2121 has ftp helper attached PASS: ns2-2hUniwU2 connection on port 2121 has ftp helper attached ... Fixes: 619ae8e0697a6 ("selftests: netfilter: add test case for conntrack helper assignment") Signed-off-by: Chen Yi <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-01-09selftests/tls: fix selftests after adding ChaCha20-Poly1305Vadim Fedorenko1-2/+2
TLS selftests where broken because of wrong variable types used. Fix it by changing u16 -> uint16_t Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Reported-by: kernel test robot <[email protected]> Signed-off-by: Vadim Fedorenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-08Merge tag 'linux-kselftest-kunit-fixes-5.11-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "One fix to force the use of the 'tty' console for UML. Given that kunit tool requires the console output, explicitly stating the dependency makes sense than relying on it being the default" * tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Force the use of the 'tty' console for UML
2021-01-08Merge tag 'linux-kselftest-next-5.11-rc3' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Two minor fixes to vDSO test changes in this merge window" * tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vDSO: fix -Wformat warning in vdso_test_correctness selftests/vDSO: add additional binaries to .gitignore
2021-01-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-437/+363
Pull kvm fixes from Paolo Bonzini: "x86: - Fixes for the new scalable MMU - Fixes for migration of nested hypervisors on AMD - Fix for clang integrated assembler - Fix for left shift by 64 (UBSAN) - Small cleanups - Straggler SEV-ES patch ARM: - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access Misc: - selftests cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits) KVM: x86: __kvm_vcpu_halt can be static KVM: SVM: Add support for booting APs in an SEV-ES guest KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode KVM: nSVM: correctly restore nested_run_pending on migration KVM: x86/mmu: Clarify TDP MMU page list invariants KVM: x86/mmu: Ensure TDP MMU roots are freed after yield kvm: check tlbs_dirty directly KVM: x86: change in pv_eoi_get_pending() to make code more readable MAINTAINERS: Really update email address for Sean Christopherson KVM: x86: fix shift out of bounds reported by UBSAN KVM: selftests: Implement perf_test_util more conventionally KVM: selftests: Use vm_create_with_vcpus in create_vm KVM: selftests: Factor out guest mode code KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte() KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte() ...
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel1-1/+1
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski3-7/+13
Alexei Starovoitov says: ==================== pull-request: bpf 2021-01-07 We've added 4 non-merge commits during the last 10 day(s) which contain a total of 4 files changed, 14 insertions(+), 7 deletions(-). The main changes are: 1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong. 2) Fix resolve_btfids for multiple type hierarchies, from Jiri. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpftool: Fix compilation failure for net.o with older glibc tools/resolve_btfids: Warn when having multiple IDs for single type bpf: Fix a task_iter bug caused by a merge conflict resolution selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07KVM: selftests: Implement perf_test_util more conventionallyAndrew Jones6-146/+166
It's not conventional C to put non-inline functions in header files. Create a source file for the functions instead. Also reduce the amount of globals and rename the functions to something less generic. Reviewed-by: Ben Gardon <[email protected]> Reviewed-by: Peter Xu <[email protected]> Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-01-07KVM: selftests: Use vm_create_with_vcpus in create_vmAndrew Jones5-47/+21
Reviewed-by: Ben Gardon <[email protected]> Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-01-07KVM: selftests: Factor out guest mode codeAndrew Jones6-257/+189
demand_paging_test, dirty_log_test, and dirty_log_perf_test have redundant guest mode code. Factor it out. Also, while adding a new include, remove the ones we don't need. Reviewed-by: Ben Gardon <[email protected]> Reviewed-by: Peter Xu <[email protected]> Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-01-07Merge branch 'kvm-master' into kvm-nextPaolo Bonzini61-264/+912
Fixes to get_mmio_spte, destined to 5.10 stable branch.
2021-01-07selftests: netfilter: add selftest for ipip pmtu discovery with enabled ↵Florian Westphal2-1/+208
connection tracking Convert Christians bug description into a reproducer. Cc: Shuah Khan <[email protected]> Reported-by: Christian Perle <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Acked-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07tools: selftests: add test for changing routes with PTMU exceptionsSean Tranchetti1-2/+69
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-06bpftool: Fix compilation failure for net.o with older glibcAlan Maguire1-1/+0
For older glibc ~2.17, #include'ing both linux/if.h and net/if.h fails due to complaints about redefinition of interface flags: CC net.o In file included from net.c:13:0: /usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’ IFF_UP = 1<<0, /* sysfs */ ^ /usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here IFF_UP = 0x1, /* Interface is up. */ The issue was fixed in kernel headers in [1], but since compilation of net.c picks up system headers the problem can recur. Dropping #include <linux/if.h> resolves the issue and it is not needed for compilation anyhow. [1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/ Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support") Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-05tools/resolve_btfids: Warn when having multiple IDs for single typeJiri Olsa1-5/+12
The kernel image can contain multiple types (structs/unions) with the same name. This causes distinct type hierarchies in BTF data and makes resolve_btfids fail with error like: BTFIDS vmlinux FAILED unresolved symbol udp6_sock as reported by Qais Yousef [1]. This change adds warning when multiple types of the same name are detected: BTFIDS vmlinux WARN: multiple IDs found for 'file': 526, 113351 - using 526 WARN: multiple IDs found for 'sk_buff': 2744, 113958 - using 2744 We keep the lower ID for the given type instance and let the build continue. Also changing the 'nr' variable name to 'nr_types' to avoid confusion. [1] https://lore.kernel.org/lkml/20201229151352.6hzmjvu3qh6p2qgg@e107158-lin/ Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-05selftests: fix the return value for UDP GRO testPo-Hsu Lin1-0/+34
The udpgro.sh will always return 0 (unless the bpf selftest was not build first) even if there are some failed sub test-cases. Therefore the kselftest framework will report this case is OK. Check and return the exit status of each test to make it easier to spot real failures. Signed-off-by: Po-Hsu Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-01-05Merge tag 'net-5.11-rc3' of ↵Linus Torvalds4-9/+48
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter, wireless and bpf trees. Current release - regressions: - mt76: fix NULL pointer dereference in mt76u_status_worker and mt76s_process_tx_queue - net: ipa: fix interconnect enable bug Current release - always broken: - netfilter: fixes possible oops in mtype_resize in ipset - ath11k: fix number of coding issues found by static analysis tools and spurious error messages Previous releases - regressions: - e1000e: re-enable s0ix power saving flows for systems with the Intel i219-LM Ethernet controllers to fix power use regression - virtio_net: fix recursive call to cpus_read_lock() to avoid a deadlock - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst() - sysfs: take the rtnl lock around XPS configuration - xsk: fix memory leak for failed bind and rollback reservation at NETDEV_TX_BUSY - r8169: work around power-saving bug on some chip versions Previous releases - always broken: - dcb: validate netlink message in DCB handler - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS to prevent unnecessary retries - vhost_net: fix ubuf refcount when sendmsg fails - bpf: save correct stopping point in file seq iteration - ncsi: use real net-device for response handler - neighbor: fix div by zero caused by a data race (TOCTOU) - bareudp: fix use of incorrect min_headroom size and a false positive lockdep splat from the TX lock - mvpp2: - clear force link UP during port init procedure in case bootloader had set it - add TCAM entry to drop flow control pause frames - fix PPPoE with ipv6 packet parsing - fix GoP Networking Complex Control config of port 3 - fix pkt coalescing IRQ-threshold configuration - xsk: fix race in SKB mode transmit with shared cq - ionic: account for vlan tag len in rx buffer len - stmmac: ignore the second clock input, current clock framework does not handle exclusive clock use well, other drivers may reconfigure the second clock Misc: - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow existing scheme" * tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event r8169: work around power-saving bug on some chip versions net: usb: qmi_wwan: add Quectel EM160R-GL selftests: mlxsw: Set headroom size of correct port net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag ibmvnic: fix: NULL pointer dereference. docs: networking: packet_mmap: fix old config reference docs: networking: packet_mmap: fix formatting for C macros vhost_net: fix ubuf refcount incorrectly when sendmsg fails bareudp: Fix use of incorrect min_headroom size bareudp: set NETIF_F_LLTX flag net: hdlc_ppp: Fix issues when mod_timer is called while timer is running atlantic: remove architecture depends erspan: fix version 1 check in gre_parse_header() net: hns: fix return value check in __lb_other_process() net: sched: prevent invalid Scell_log shift count net: neighbor: fix a crash caused by mod zero ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst() ...
2021-01-04selftests: mlxsw: Set headroom size of correct portIdo Schimmel1-1/+1
The test was setting the headroom size of the wrong port. This was not visible because of a firmware bug that canceled this bug. Set the headroom size of the correct port, so that the test will pass with both old and new firmware versions. Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-04Merge tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linuxLinus Torvalds1-1/+0
Pull ENABLE_MUST_CHECK removal from Miguel Ojeda: "Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)" Note that this removes the config option by making the must-check unconditional, not by removing must check itself. * tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux: Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
2021-01-04selftests: Skip BPF seftests by defaultMark Brown1-2/+4
The BPF selftests have build time dependencies on cutting edge versions of tools in the BPF ecosystem including LLVM which are more involved to satisfy than more typical requirements like installing a package from your distribution. This causes issues for users looking at kselftest in as a whole who find that a default build of kselftest fails and that resolving this is time consuming and adds administrative overhead. The fast pace of BPF development and the need for a full BPF stack to do substantial development or validation work on the code mean that people working directly on it don't see a reasonable way to keep supporting older environments without causing problems with the usability of the BPF tests in BPF development so these requirements are unlikely to be relaxed in the immediate future. There is already support for skipping targets so in order to reduce the barrier to entry for people interested in kselftest as a whole let's use that to skip the BPF tests by default when people work with the top level kselftest build system. Users can still build the BPF selftests as part of the wider kselftest build by specifying SKIP_TARGETS, including setting an empty SKIP_TARGETS to build everything. They can also continue to build the BPF selftests individually in cases where they are specifically focused on BPF. This isn't ideal since it means people will need to take special steps to build the BPF tests but the dependencies mean that realistically this is already the case to some extent and it makes it easier for people to pick up and work with the other selftests which is hopefully a net win. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-04selftests/vDSO: fix -Wformat warning in vdso_test_correctnessTobias Klauser1-1/+1
Fix the following -Wformat warnings in vdso_test_correctness.c: vdso_test_correctness.c: In function ‘test_one_clock_gettime64’: vdso_test_correctness.c:352:21: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘long long int’ [-Wformat=] 352 | printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n", | ~~~~^ | | | long int | %09lld 353 | (unsigned long long)start.tv_sec, start.tv_nsec, | ~~~~~~~~~~~~~ | | | long long int vdso_test_correctness.c:352:32: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘long long int’ [-Wformat=] 352 | printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n", | ~~~~^ | | | long int | %09lld 353 | (unsigned long long)start.tv_sec, start.tv_nsec, 354 | (unsigned long long)vdso.tv_sec, vdso.tv_nsec, | ~~~~~~~~~~~~ | | | long long int vdso_test_correctness.c:352:43: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 7 has type ‘long long int’ [-Wformat=] The tv_sec member of __kernel_timespec is long long, both in uapi/linux/time_types.h and locally in vdso_test_correctness.c. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-04selftests/vDSO: add additional binaries to .gitignoreTobias Klauser1-0/+3
Add the test binaries introduced by commit 693f5ca08ca0 ("kselftest: Extend vDSO selftest"), commit 03f55c7952c9 ("kselftest: Extend vDSO selftest to clock_getres") and commit c7e5789b24d3 ("kselftest: Move test_vdso to the vDSO test suite") to .gitignore. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-04kunit: tool: Force the use of the 'tty' console for UMLDavid Gow1-1/+1
kunit_tool relies on the UML console outputting printk() output to the tty in order to get results. Since the default console driver could change, pass 'console=tty' to the kernel. This is triggered by a change[1] to use ttynull as a fallback console driver which -- by chance or by design -- seems to have changed the default console output on UML, breaking kunit_tool. While this may be fixed, we should be less fragile to such changes in the default. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=757055ae8dedf5333af17b3b5b4b70ba9bc9da4e Signed-off-by: David Gow <[email protected]> Fixes: 757055ae8ded ("init/console: Use ttynull as a fallback when there is no console") Reported-by: Andy Shevchenko <[email protected]> Tested-by: Andy Shevchenko <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-01-04tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or ↵Srinivas Pandruvada1-0/+11
base_frequency In some case when BIOS disabled turbo, cpufreq cpuinfo_max_freq can be lower than base_frequency at higher config level. So, in that case set scaling_min_freq to base_frequency. Signed-off-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-01-04tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequencySrinivas Pandruvada1-0/+21
When BIOS disables turbo, The scaling_max_freq in cpufreq sysfs will be limited to config level 0 base frequency. But when user selects a higher config levels, this will result in higher base frequency. But since scaling_max_freq is still old base frequency, the performance will still be limited. So when the turbo is disabled and cpufreq base_frequency is higher than scaling_max_freq, update the scaling_max_freq to the base_frequency. Signed-off-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-01-04xfrm: Fix wraparound in xfrm_policy_addr_delta()Visa Hankala1-0/+43
Use three-way comparison for address components to avoid integer wraparound in the result of xfrm_policy_addr_delta(). This ensures that the search trees are built and traversed correctly. Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0. Prefix /0 has only one equivalence class. Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address") Signed-off-by: Visa Hankala <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2021-01-04selftests: xfrm: fix test return value override issue in xfrm_policy.shPo-Hsu Lin1-1/+1
When running this xfrm_policy.sh test script, even with some cases marked as FAIL, the overall test result will still be PASS: $ sudo ./xfrm_policy.sh PASS: policy before exception matches FAIL: expected ping to .254 to fail (exceptions) PASS: direct policy matches (exceptions) PASS: policy matches (exceptions) FAIL: expected ping to .254 to fail (exceptions and block policies) PASS: direct policy matches (exceptions and block policies) PASS: policy matches (exceptions and block policies) FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes) PASS: direct policy matches (exceptions and block policies after hresh changes) PASS: policy matches (exceptions and block policies after hresh changes) FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3) PASS: direct policy matches (exceptions and block policies after hthresh change in ns3) PASS: policy matches (exceptions and block policies after hthresh change in ns3) FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal) PASS: direct policy matches (exceptions and block policies after htresh change to normal) PASS: policy matches (exceptions and block policies after htresh change to normal) PASS: policies with repeated htresh change $ echo $? 0 This is because the $lret in check_xfrm() is not a local variable. Therefore when a test failed in check_exceptions(), the non-zero $lret will later get reset to 0 when the next test calls check_xfrm(). With this fix, the final return value will be 1. Make it easier for testers to spot this failure. Fixes: 39aa6928d462d0 ("xfrm: policy: fix netlink/pf_key policy lookups") Signed-off-by: Po-Hsu Lin <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-12-29selftests/vm: fix building protection keys testHarish1-5/+5
Commit d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") tried to include a ARCH check for powerpc, however ARCH is not defined in the Makefile before including lib.mk. This makes test building to skip on both x86 and powerpc. Fix the arch check by replacing it using machine type as it is already defined and used in the test. Link: https://lkml.kernel.org/r/[email protected] Fixes: d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") Signed-off-by: Harish <[email protected]> Reviewed-by: Sandipan Das <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Sandipan Das <[email protected]> Cc: John Hubbard <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-29selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXECJiang Wang1-1/+1
When CONFIG_BPF_LSM is not configured, running bpf selftesting will show BPF_F_BPRM_SECUREEXEC undefined error for bprm_opts.c. The problem is that bprm_opts.c includes vmliunx.h. The vmlinux.h is generated by "bpftool btf dump file ./vmlinux format c". On the other hand, BPF_F_BPRM_SECUREEXEC is defined in include/uapi/linux/bpf.h and used only in bpf_lsm.c. When CONFIG_BPF_LSM is not set, bpf_lsm will not be compiled, so vmlinux.h will not include definition of BPF_F_BPRM_SECUREEXEC. Ideally, we want to compile bpf selftest regardless of the configuration setting, so change the include file from vmlinux.h to bpf.h. Signed-off-by: Jiang Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-8/+47
Daniel Borkmann says: ==================== pull-request: bpf 2020-12-28 The following pull-request contains BPF updates for your *net* tree. There is a small merge conflict between bpf tree commit 69ca310f3416 ("bpf: Save correct stopping point in file seq iteration") and net tree commit 66ed594409a1 ("bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to the error path: [...] curr_task = task_seq_get_next(ns, &curr_tid, true); if (!curr_task) { info->task = NULL; info->tid = curr_tid; return NULL; } /* set info->task and info->tid */ [...] We've added 10 non-merge commits during the last 9 day(s) which contain a total of 11 files changed, 75 insertions(+), 20 deletions(-). The main changes are: 1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson. 2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling point to BPF hashtab initialization, from Eric Dumazet. 3) Fix a splat in task iterator by saving the correct stopping point in the seq file iteration, from Jonathan Lemon. 4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY errors on update/deletes, from Andrii Nakryiko. 5) Fix BPF selftest error reporting to something more user friendly if the vmlinux BTF cannot be found, from Kamal Mostafa. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-12-28perf record: Tweak "Lowering..." warning in record_opts__config_freqHans-Peter Nilsson1-2/+2
That is, instead of "Lowering default frequency rate to <F>" say "Lowering default frequency rate from <f> to <F>", specifying the overridden default frequency <f>, so you don't have to grep through the source to "remember" that was e.g. 4000. Signed-off-by: Hans-Peter Nilsson <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf buildid-list: Add support for mmap2's buildid eventsJiri Olsa1-0/+3
Add buildid-list support for mmap2's build id data, so we can display build ids for dso objects for data without the build id cache update. $ perf buildid-list 1805c738c8f3ec0f47b7ea09080c28f34d18a82b /usr/lib64/ld-2.31.so d278249792061c6b74d1693ca59513be1def13f2 /usr/lib64/libc-2.31.so By default only dso objects with hits are shown. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf buildid-cache: Add --debuginfod option to specify a server to fetch ↵Jiri Olsa3-3/+38
debug files Add the --debuginfod option to specify debuginfod URL and support to do that through config file as well. Use the following in ~/.perfconfig file: [buildid-cache] debuginfod=http://192.168.122.174:8002 Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf tools: Add support to display build ids when available in ↵Jiri Olsa1-11/+30
PERF_RECORD_MMAP2 events Add support to display the build id in PERF_RECORD_MMAP2 events, when available: $ perf script --show-mmap-events | head -4 swapper ... @ 0xffffffff81000000 <ff1969b3ba5e43911208bb46fa7d5b1eb809e422>]: ---p [kernel.kallsyms]_text swapper ... @ 0 <5f62adb730272c9417883ae8b8a8ec224df8cddd>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/firmware/qemu_fw_cfg.ko swapper ... @ 0 <c9ac6e1dafc1ebdadb048f967854e810706c8bab>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/char/virtio_console.ko swapper ... @ 0 <86441a4c5b2c2ff5b440682f4c612bd4b426eb5c>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/lib/libcrc32c.ko $ perf report -D | grep MMAP2 | head -4 0 0 ... @ 0xffffffff81000000 <ff1969b3ba5e43911208bb46fa7d5b1eb809e422>]: ---p [kernel.kallsyms]_text 0 0 ... @ 0 <5f62adb730272c9417883ae8b8a8ec224df8cddd>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/firmware/qemu_fw_cfg.ko 0 0 ... @ 0 <c9ac6e1dafc1ebdadb048f967854e810706c8bab>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/char/virtio_console.ko 0 0 ... @ 0 <86441a4c5b2c2ff5b440682f4c612bd4b426eb5c>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/lib/libcrc32c.ko Adding build id data into <> brackets. Committer testing: $ perf record -vv --buildid-mmap sleep 1 |& grep -m1 build Enabling build id in mmap2 events. $ perf evlist -v cycles:u: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, build_id: 1 $ $ perf script --show-mmap-events | head -4 sleep 274800 2843.556112: PERF_RECORD_MMAP2 274800/274800: [0x564e2fd32000(0x3000) @ 0x2000 <c37cb90b77c79fc719798b066d78ef121285843e>]: r-xp /usr/bin/sleep sleep 274800 2843.556129: PERF_RECORD_MMAP2 274800/274800: [0x7fa9550d7000(0x21000) @ 0x1000 <fc190f17c4f4dc4a8a26df18eaeed41ecdb2c61b>]: r-xp /usr/lib64/ld-2.32.so sleep 274800 2843.556140: PERF_RECORD_MMAP2 274800/274800: [0x7ffd8fa96000(0x2000) @ 0 00:00 0 0]: r-xp [vdso] sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown]) $ $ perf buildid-list -i /usr/bin/sleep c37cb90b77c79fc719798b066d78ef121285843e $ perf buildid-list -i /usr/lib64/ld-2.32.so fc190f17c4f4dc4a8a26df18eaeed41ecdb2c61b And now on a system wide session to check the build ids synthesized for the kernel and some kernel modules: # perf record -a --buildid-mmap sleep 2s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.717 MB perf.data ] # perf script --show-mmap-events | head -4 swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffbb000000(0xe02557) @ 0xffffffffbb000000 <e71ac4b0b0631c27181dab25d63be18dad02feb8>]: ---p [kernel.kallsyms]_text swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffc01dc000(0x6000) @ 0 <36d21515c0b22eb2859b6419a6cdf87ef4cd01c8>]: ---p /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffc01eb000(0x24000) @ 0 <c4fbfea32d0518b3e7879de8deca40ea142bb782>]: ---p /lib/modules/5.11.0-rc1+/kernel/fs/fuse/fuse.ko swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffc0210000(0x7000) @ 0 <dd6cfb10ae66aa7b1e7b37000a004004be8092e0>]: ---p /lib/modules/5.11.0-rc1+/kernel/drivers/block/zram/zram.ko # perf buildid-list -h kernel Usage: perf buildid-list [<options>] -k, --kernel Show current kernel build id # perf buildid-list --kernel e71ac4b0b0631c27181dab25d63be18dad02feb8 # file /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), BuildID[sha1]=36d21515c0b22eb2859b6419a6cdf87ef4cd01c8, with debug_info, not stripped # perf buildid-list -i /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko 36d21515c0b22eb2859b6419a6cdf87ef4cd01c8 # perf buildid-list -i /lib/modules/5.11.0-rc1+/kernel/fs/fuse/fuse.ko c4fbfea32d0518b3e7879de8deca40ea142bb782 # perf buildid-list -i /lib/modules/5.11.0-rc1+/kernel/drivers/block/zram/zram.ko dd6cfb10ae66aa7b1e7b37000a004004be8092e0 # Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf record: Add --buildid-mmap option to enable PERF_RECORD_MMAP2's build idJiri Olsa8-5/+45
Add --buildid-mmap option to enable build id in PERF_RECORD_MMAP2 events. It will only work if there's kernel support for that and it disables build id cache (implies --no-buildid). It's also possible to enable it permanently via config option in ~/.perfconfig file: [record] build-id=mmap Also added build_id bit in the verbose output for perf_event_attr: # perf record --buildid-mmap -vv ... perf_event_attr: type 1 size 120 ... build_id 1 Adding also missing text_poke bit. Committer testing: $ perf record -h build Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -B, --no-buildid do not collect buildids in perf.data -N, --no-buildid-cache do not update the buildid cache --buildid-all Record build-id of all DSOs regardless of hits --buildid-mmap Record build-id in map events $ $ perf record --buildid-mmap sleep 1 Failed: no support to record build id in mmap events, update your kernel. $ After adding the needed kernel bits in a test kernel: $ perf record -vv --buildid-mmap sleep 1 |& grep -m1 build Enabling build id in mmap2 events. $ perf evlist -v cycles:u: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, build_id: 1 $ Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf tools: Allow synthesizing the build id for kernel/modules/tasks in ↵Jiri Olsa1-0/+32
PERF_RECORD_MMAP2 Adding build id to synthesized mmap2 events for everything - kernel/modules/tasks, when symbol_conf.buildid_mmap2 is true. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf tools: Allow using PERF_RECORD_MMAP2 to synthesize the kernel modules mapsJiri Olsa1-17/+32
Allow using PERF_RECORD_MMAP2 to synthesize the kernel modules maps so that we can use PERF_RECORD_MMAP2 to encode the kernel modules build ids in the following csets. It's enabled by a new symbol_conf.buildid_mmap2 bool field, which will be switchable in following changes. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf tools: Allow using PERF_RECORD_MMAP2 to synthesize the kernel mapJiri Olsa2-14/+29
Allow using PERF_RECORD_MMAP2 to synthesize the kernel map so that we can use PERF_RECORD_MMAP2 to encode the kernel build id in the following csets. It's enabled by a new symbol_conf.buildid_mmap2 bool field, which will be switchable in following changes. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf tools: Store build id when available in PERF_RECORD_MMAP2 metadata eventsJiri Olsa4-12/+41
When processing a PERF_RECORD_MMAP2 metadata event, check on the build id misc bit: PERF_RECORD_MISC_MMAP_BUILD_ID and if it is set, store the build id in mmap's dso object. Also adding the build id data to struct perf_record_mmap2 event definition. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf tools: Do not swap mmap2 fields in case it contains build idJiri Olsa1-4/+7
If the PERF_RECORD_MISC_MMAP_BUILD_ID misc bit is set, mmap2 events carries a build id, placed in the following union: union { struct { u32 maj; u32 min; u64 ino; u64 ino_generation; }; struct { u8 build_id_size; u8 __reserved_1; u16 __reserved_2; u8 build_id[20]; }; }; In this case we can't swap above fields. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28tools headers uapi: Sync tools/include/uapi/linux/perf_event.hJiri Olsa1-5/+37
Syncing tools's uapi with mmap2 build id data changes. Committer notes: I'm taking the tools/ bits, so this will be in fact ahead of the kernel till the bpf/perf-kernel bits are merged. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf arm64: Add argument support for SDTLeo Yan1-0/+94
Now the two OP formats are used for SDT marker argument in Arm64 ELF, one format is general register xNUM (e.g. x1, x2, etc), another is for using stack pointer to access local variables (e.g. [sp], [sp, 8]). This patch adds support SDT marker argument for Arm64, it parses OP and converts to uprobe compatible format. Signed-off-by: Leo Yan <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Truong <[email protected]> Cc: Alexis Berlemont <[email protected]> Cc: He Zhe <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-28perf probe: Fixup Arm64 SDT argumentsLeo Yan1-2/+36
Arm64 ELF section '.note.stapsdt' uses string format "-4@[sp, NUM]" if the probe is to access data in stack, e.g. below is an example for dumping Arm64 ELF file and shows the argument format: Arguments: -4@[sp, 12] -4@[sp, 8] -4@[sp, 4] Comparing against other archs' argument format, Arm64's argument introduces an extra space character in the middle of square brackets, due to argv_split() uses space as splitter, the argument is wrongly divided into two items. To support Arm64 SDT, this patch fixes up for this case, if any item contains sub string "[sp", concatenates the two continuous items. And adds the detailed explaination in comment. Signed-off-by: Leo Yan <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Truong <[email protected]> Cc: Alexis Berlemont <[email protected]> Cc: He Zhe <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-27Merge tag 'objtool-urgent-2020-12-27' of ↵Linus Torvalds4-26/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
2020-12-25Merge tag 'perf-tools-2020-12-24' of ↵Linus Torvalds23-391/+688
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use cases in ARM machines. - Fix memory leak when synthesizing SDT probes in 'perf probe'. - Update kernel header copies related to KVM, epol_pwait. msr-index and powerpc and s390 syscall tables. * tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits) perf probe: Fix memory leak when synthesizing SDT probes perf stat aggregation: Add separate thread member perf stat aggregation: Add separate core member perf stat aggregation: Add separate die member perf stat aggregation: Add separate socket member perf stat aggregation: Add separate node member perf stat aggregation: Start using cpu_aggr_id in map perf cpumap: Drop in cpu_aggr_map struct perf cpumap: Add new map type for aggregation perf stat: Replace aggregation ID with a struct perf cpumap: Add new struct for cpu aggregation perf cpumap: Use existing allocator to avoid using malloc perf tests: Improve topology test to check all aggregation types perf tools: Update s390's syscall.tbl copy from the kernel sources perf tools: Update powerpc's syscall.tbl copy from the kernel sources perf s390: Move syscall.tbl check into check-headers.sh perf powerpc: Move syscall.tbl check to check-headers.sh tools headers UAPI: Synch KVM's svm.h header with the kernel tools kvm headers: Update KVM headers from the kernel sources tools headers UAPI: Sync KVM's vmx.h header with the kernel sources ...
Powered by cgit, Gruvboxed by Blaster4385.