| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix combination of --reap and --update in xt_recent that triggers
UAF, from Jozsef Kadlecsik.
2) Fix current year in nft_meta selftest, from Fabian Frederick.
3) Fix possible UAF in the netns destroy path of nftables.
4) Fix incorrect checksum calculation when mangling ports in flowtable,
from Sven Auhagen.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: flowtable: fix tcp and udp header checksum update
netfilter: nftables: fix possible UAF over chains from packet path in netns
selftests: netfilter: fix current year
netfilter: xt_recent: Fix attempt to update deleted entry
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in
test. Include it instead of <netpacket/packet.h> otherwise the error of
redefinition arrives.
Also fix the compiler warning about ambiguous control flow by adding
explicit braces.
Fixes: 8fe2f761cae9 ("net-timestamp: expand documentation")
Suggested-by: Willem de Bruijn <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
TLS selftests were broken also because of use of structure that
was not exported to UAPI. Fix by defining the union in tests.
Fixes: 4f336e88a870 (selftests/tls: add CHACHA20-POLY1305 to tls selftests)
Reported-by: Rong Chen <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
use date %Y instead of %G to read current year
Problem appeared when running lkp-tests on 01/01/2021
Fixes: 48d072c4e8cd ("selftests: netfilter: add time counter check")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Fabian Frederick <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Avoid a naming conflict with for_each_event with similar code in
parse-events.c, rename to for_each_event_tps.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running "perf mem report" in TUI mode fails with ENOMEM message in
powerpc:
failed to process sample
Running with debug and verbose options points that issue is while
allocating memory for sample histograms.
The error path is:
symbol__inc_addr_samples() ->
__symbol__inc_addr_samples() ->
annotated_source__histogram()
symbol__inc_addr_samples() calls annotated_source__alloc_histograms ()
to allocate memory for sample histograms using calloc(). Here calloc()
fails since the size of symbol is huge. The size of a symbol is
calculated as difference between its start and end address.
Example histogram allocation that fails is:
sym->name is _end
sym->start is 0xc0000000027a0000
sym->end is 0xc008000003890000
symbol__size(sym) is 0x80000010f0000
In the above case, the difference between sym->start
(0xc0000000027a0000) and sym->end (0xc008000003890000) is huge.
This is same problem as in s390 and arm64 which are fixed in commits:
b9c0a64901d5 ("perf annotate: Fix s390 gap between kernel end and module start")
78886f3ed37e ("perf symbols: Fix arm64 gap between kernel start and module end")
When this symbol was read first, its start and end address was set to
address which matches with data from /proc/kallsyms.
After symbol__new():
symbol__new: _end 0xc0000000027a0000-0xc0000000027a0000
From /proc/kallsyms:
...
c000000002799370 b backtrace_flag
c000000002799378 B radix_tree_node_cachep
c000000002799380 B __bss_stop
c0000000027a0000 B _end
c008000003890000 t icmp_checkentry [ip_tables]
c008000003890038 t ipt_alloc_initial_table [ip_tables]
c008000003890468 T ipt_do_table [ip_tables]
c008000003890de8 T ipt_unregister_table_pre_exit [ip_tables]
...
Perf calls function symbols__fixup_end() which sets the end of symbol to
0xc008000003890000, which is the next address and this is the start
address of first module (icmp_checkentry in above) which will make the
huge symbol size of 0x80000010f0000.
After symbols__fixup_end:
symbols__fixup_end: sym->name: _end
sym->start: 0xc0000000027a0000
sym->end: 0xc008000003890000
On powerpc, kernel text segment is located at 0xc000000000000000 whereas
the modules are located at very high memory addresses,
0xc00800000xxxxxxx. Since the gap between end of kernel text segment and
beginning of first module's address is high, histogram allocation using
calloc fails.
Fix this by detecting the kernel's last symbol and limiting the range of
last kernel symbol to pagesize.
Signed-off-by: Athira Rajeev<[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-By: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch fixes "perf inject --jit" to properly operate on
namespaced/containerized processes:
* jitdump files are generated by the process, thus they should be
looked up in its mount NS.
* DSOs of injected MMAP events will later be looked up in the process
mount NS, so write them into its NS.
* PIDs & TIDs from jitdump events need to be translated to the PID as
seen by "perf record" before written into MMAP events.
For a process in a different PID NS, the TID & PID given in the jitdump
event are actually ignored; I use the TID & PID of the thread which
mmap()ed the jitdump file. This is simplified and won't do for forks of
the initial process, if they continue using the same jitdump file.
Future patches might improve it.
This was tested by recording a NodeJS process running with
"--perf-prof", inside a Docker container, and by recording another
NodeJS process running in the same namespaces as perf itself, to make
sure it's not broken for non-containerized processes.
Signed-off-by: Yonatan Goldschmidt <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Provides an accurate mean to determine if the owner thread is in a
different PID namespace.
Signed-off-by: Yonatan Goldschmidt <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
events
Like in __event__synthesize_thread(), I think it's better to use
scandir() instead of the readdir() loop. In case some malicious task
continues to create new threads, the readdir() loop will run over and
over to collect tids. The scandir() also has the problem but the window
is much smaller since it doesn't do much work during the iteration.
Also add filter_task() function as we only care the tasks.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To synthesize information to resolve sample IPs, it needs to scan task
and mmap info from the /proc filesystem. For each process, it opens
(and reads) status and maps file respectively. But as kernel threads
don't have memory maps so we can skip the maps file.
To find kernel threads, check "VmPeak:" line in /proc/<PID>/status file.
It's about the peak virtual memory usage so only user-level tasks have
that. Note that it's possible to miss the line due to partial reads.
So we should double-check if it's a really kernel thread when there's no
VmPeak line.
Thus check "Threads:" line (which follows the VmPeak line whether or not
it exists) to be sure it's read enough data - just in case of deeply
nested pid namespaces or large number of supplementary groups are
involved.
This is for user process:
$ head -40 /proc/1/status
Name: systemd
Umask: 0000
State: S (sleeping)
Tgid: 1
Ngid: 0
Pid: 1
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 256
Groups:
NStgid: 1
NSpid: 1
NSpgid: 1
NSsid: 1
VmPeak: 234192 kB <-- here
VmSize: 169964 kB
VmLck: 0 kB
VmPin: 0 kB
VmHWM: 29528 kB
VmRSS: 6104 kB
RssAnon: 2756 kB
RssFile: 3348 kB
RssShmem: 0 kB
VmData: 19776 kB
VmStk: 1036 kB
VmExe: 784 kB
VmLib: 9532 kB
VmPTE: 116 kB
VmSwap: 2400 kB
HugetlbPages: 0 kB
CoreDumping: 0
THP_enabled: 1
Threads: 1 <-- and here
SigQ: 1/62808
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
SigBlk: 7be3c0fe28014a03
SigIgn: 0000000000001000
And this is for kernel thread:
$ head -20 /proc/2/status
Name: kthreadd
Umask: 0000
State: S (sleeping)
Tgid: 2
Ngid: 0
Pid: 2
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 64
Groups:
NStgid: 2
NSpid: 2
NSpgid: 0
NSsid: 0
Threads: 1 <-- here
SigQ: 1/62808
SigPnd: 0000000000000000
ShdPnd: 0000000000000000
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To save memory usage, it needs to reduce the number of entries in the
proc filesystem. It's using /proc/<PID>/task directory to traverse
threads in the process and then kernel creates /proc/<PID>/task/<TID>
entries.
After that it checks the thread info using the /proc/<TID>/status file
rather than /proc/<PID>/task/<TID>/status. As far as I can see, they
are the same and contain all the info we need.
Using the latter eliminates the unnecessary /proc/<TID> entry. This can
be useful especially a large number of threads are used in the system.
In my experiment around 1KB of memory on average was saved for each
thread (which is not a thread group leader).
To do this, pass both pid and tid to perf_event_prepare_comm() if it
knows them. In case it doesn't know, passing 0 as pid will do the old
way.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json
In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.
Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reduce duplication in the JSONs by referencing standard events from
armv8-common-and-microarch.json
In general the "PublicDescription" fields are not modified when somewhat
significantly worded differently than the standard.
Apart from that, description and names for events slightly different to
standard are changed (to standard) for consistency.
Note that names for events 0x34 and 0x35 are non-standard and remain
unchanged. Those events came from the following originally:
https://github.com/AmpereComputing/ampere-centos-kernel/blob/4c2479c67bbcf35b35224db12a092b33682b181c/Documentation/arm64/eMAG-ARM-CoreImpDefined.pdf
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a common and microarch JSON, which can be referenced from CPU JSONs.
For now, brief and public description are as event brief event
description from the ARMv8 ARM [0], D7-11.
The list of events is not complete, as not all events will be referenced
yet.
Reference document is at the following:
[0] https://documentation-service.arm.com/static/5fa3bd1eb209f547eebd4141?token=
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "briefdescription" for event 0x35 has a typo - fix it.
Fixes: d35c595bf005 ("perf vendor events arm64: Revise core JSON events for eMAG")
Signed-off-by: John Garry <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nakamura, Shunsuke/中村 俊介 <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Other perf tool builtins already supported a DSO filter.
For example:
$ perf report --dsos a,b,c
which only considers symbols in these dsos.
Now the DSO filter is supported in 'perf script':
root@kbl-ppc:~# ./perf script --dsos "[kernel.kallsyms]"
perf 18123 [000] 6142863.075104: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075107: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075108: 10 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [000] 6142863.075109: 273 cycles: ffffffff9ca7730a native_write_msr+0xa ([kernel.kallsyms])
perf 18123 [000] 6142863.075110: 7684 cycles: ffffffff9ca3c9c0 native_sched_clock+0x50 ([kernel.kallsyms])
perf 18123 [000] 6142863.075112: 213017 cycles: ffffffff9d765a92 syscall_exit_to_user_mode+0x32 ([kernel.kallsyms])
perf 18123 [001] 6142863.075156: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [001] 6142863.075158: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
perf 18123 [001] 6142863.075159: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms])
Committer testing:
$ perf script
ls 2364888 29303.010949: 1 cycles:u: ffffffffa4bbc6a9 [unknown] ([unknown])
ls 2364888 29303.010957: 1 cycles:u: ffffffffa429ef48 [unknown] ([unknown])
ls 2364888 29303.010961: 1 cycles:u: ffffffffa4260133 [unknown] ([unknown])
ls 2364888 29303.010964: 5 cycles:u: ffffffffa429efad [unknown] ([unknown])
ls 2364888 29303.010967: 41 cycles:u: ffffffffa42a4586 [unknown] ([unknown])
ls 2364888 29303.010972: 435 cycles:u: ffffffffa429efe0 [unknown] ([unknown])
ls 2364888 29303.010978: 5142 cycles:u: 7f9b95bc2abf __GI___tunables_init+0x11f (/usr/lib64/ld-2.32.so)
ls 2364888 29303.011006: 38551 cycles:u: ffffffffa4290f61 [unknown] ([unknown])
ls 2364888 29303.011486: 238234 cycles:u: 7f9b95bb7741 _dl_relocate_object+0xa71 (/usr/lib64/ld-2.32.so)
ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
$
Before:
$ perf script --dsos /usr/lib64/libc-2.32.so |& head -5
Error: unknown option `dsos'
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
$
After:
$ perf script --dsos /usr/lib64/libc-2.32.so
ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so)
$
Signed-off-by: Jin Yao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When we lookup an address and don't find a map we should filter that
sample if the user specified a list of --dso entries to filter on, fix
it.
Before:
$ perf script
sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
sleep 274800 2843.556168: 1 cycles:u: ffffffffbb2b047d [unknown] ([unknown])
sleep 274800 2843.556171: 1 cycles:u: ffffffffbb2706b2 [unknown] ([unknown])
sleep 274800 2843.556174: 6 cycles:u: ffffffffbb2b0267 [unknown] ([unknown])
sleep 274800 2843.556176: 59 cycles:u: ffffffffbb2b03b1 [unknown] ([unknown])
sleep 274800 2843.556180: 691 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
sleep 274800 2843.556189: 9160 cycles:u: 7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so)
sleep 274800 2843.556312: 86937 cycles:u: 7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so)
$
So we have some samples we somehow didn't find in a map for, if we now
do:
$ perf report --stdio --dso /usr/lib64/ld-2.32.so
# dso: /usr/lib64/ld-2.32.so
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:u'
# Event count (approx.): 96856
#
# Overhead Command Symbol
# ........ ....... ........................
#
89.76% sleep [.] _dl_lookup_symbol_x
9.46% sleep [.] __GI___tunables_init
0.71% sleep [k] 0xffffffffbb26bff4
0.06% sleep [k] 0xffffffffbb2b03b1
0.01% sleep [k] 0xffffffffbb2b0267
0.00% sleep [k] 0xffffffffbb2706b2
0.00% sleep [k] 0xffffffffbb2b047d
$
After this patch we get the right output with just entries for the DSOs
specified in --dso:
$ perf report --stdio --dso /usr/lib64/ld-2.32.so
# dso: /usr/lib64/ld-2.32.so
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:u'
# Event count (approx.): 96856
#
# Overhead Command Symbol
# ........ ....... ........................
#
89.76% sleep [.] _dl_lookup_symbol_x
9.46% sleep [.] __GI___tunables_init
$
#
Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified")
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors. From the Ice Lake and later platforms, the
Topdown information can be retrieved from the dedicated "metrics"
register, which isn't impacted by other events. Also, the Topdown
metrics support both per thread/process and per core measuring. Adding
Topdown metrics events as default events can enrich the default
measuring information, and would not cost any extra multiplexing.
Introduce arch_evlist__add_default_attrs() to allow architecture
specific default events. Add the Topdown metrics events in the X86
specific arch_evlist__add_default_attrs(). Other architectures can add
their own default events later separately.
With the patch:
$ perf stat sleep 1
Performance counter stats for 'sleep 1':
0.82 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
61 page-faults:u # 0.074 M/sec
319,941 cycles:u # 0.388 GHz
242,802 instructions:u # 0.76 insn per cycle
54,380 branches:u # 66.028 M/sec
4,043 branch-misses:u # 7.43% of all branches
1,585,555 slots:u # 1925.189 M/sec
238,941 topdown-retiring:u # 15.0% retiring
410,378 topdown-bad-spec:u # 25.8% bad speculation
634,222 topdown-fe-bound:u # 39.9% frontend bound
304,675 topdown-be-bound:u # 19.2% backend bound
1.001791625 seconds time elapsed
0.000000000 seconds user
0.001572000 seconds sys
Signed-off-by: Kan Liang <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Event duration_time in a metric expression requires special handling.
Improve test coverage by including a metric whose expression includes
duration_time. The actual metric is a copied from the L1D_Cache_Fill_BW
metric on my broadwell machine.
Signed-off-by: John Garry <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit
6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
converted turbostat to read the energy_perf_bias value from sysfs.
However, older kernels which do not have that file yet, would fail. For
those, fall back to the MSR reading.
Fixes: 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
Reported-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Artem Bityutskiy <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes including fixes from can, xfrm, wireless,
wireless-drivers and netfilter trees. Nothing scary, Intel
WiFi-related fixes seemed most notable to the users.
Current release - regressions:
- dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
CPU port correctly
Current release - new code bugs:
- iwlwifi: pcie: reschedule in long-running memory reads
Previous releases - regressions:
- iwlwifi: dbg: don't try to overwrite read-only FW data
- iwlwifi: provide gso_type to GSO packets
- octeontx2: make sure the buffer is 128 byte aligned
- tcp: make TCP_USER_TIMEOUT accurate for zero window probes
- xfrm: fix wraparound in xfrm_policy_addr_delta()
- xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
CPUs in presence of packet reorder
- tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
OPEN
- wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Previous releases - always broken:
- igc: fix link speed advertising
- stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
addressing
- team: protect features update by RCU to avoid deadlock
- xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
themselves
- fec: fix temporary RMII clock reset on link up
- can: dev: prevent potential information leak in can_fill_info()
Misc:
- mrp: fix bad packing of MRP test packet structures
- uapi: fix big endian definition of ipv6_rpl_sr_hdr
- add David Ahern to IPv4/IPv6 maintainers"
* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
rxrpc: Fix memory leak in rxrpc_lookup_local
mlxsw: spectrum_span: Do not overwrite policer configuration
selftests: forwarding: Specify interface when invoking mausezahn
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
ibmvnic: Ensure that CRQ entry read are correctly ordered
MAINTAINERS: add missing header for bonding
net: decnet: fix netdev refcount leaking on error path
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
can: dev: prevent potential information leak in can_fill_info()
net: fec: Fix temporary RMII clock reset on link up
net: lapb: Add locking to the lapb module
team: protect features update by RCU to avoid deadlock
MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
...
|
|
Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.
Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
sysfs attibutes to show health related flags are added.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Add functions to support ND_CMD_GET_CONFIG_SIZE, ND_CMD_SET_CONFIG_DATA and
ND_CMD_GET_CONFIG_DATA.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
The bus config array is used to hold the regions and the respective
mappings. This config based interface enables to change the
dimm/region/namespace layouts easily.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
This patch adds sysfs attributes for nvdimm and the dimm device.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
A config array is used to hold the dimms for each bus. These dimms are
registered with nvdimm, and new nvdimms are created on the buses.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
Since this module is written to be platform agnostic, the module is made
part of the PAPR_FAMILY. ndctl identifies the family using the compatible
string inside of_node dir-entry.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
The current test module cannot be used for testing platforms (make check)
that do not have support for NFIT. In order to get the ndctl tests working,
we need a module which can emulate NVDIMM devices without relying on
ACPI/NFIT.
The aim of this proposed module is to implement a similar functionality to
the existing module but without the ACPI dependencies.
This RFC series is split into reviewable and compilable chunks.
This patch adds a new driver and registers two nvdimm bus needed for ndctl
make check.
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Adjust objtool to handle a recent binutils change to not generate
unused symbols anymore.
- Revert the fail-the-build-on-fatal-errors objtool strategy for now
due to the ever-increasing matrix of supported toolchains/plugins and
them causing too many such fatal errors currently.
- Do not add empty symbols to objdump's rbtree to accommodate clang
removing section symbols.
* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Don't fail on missing symbol table
objtool: Don't fail the kernel build on fatal errors
objtool: Don't add empty symbols to the rbtree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bad interaction between the scv handling and the fallback L1D
flush, which could lead to user register corruption. Only affects
people using scv (~no one) on machines with old firmware that are
missing the L1D flush.
- Two small selftest fixes.
Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.
* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: fix scv entry fallback flush vs interrupt
selftests/powerpc: Only test lwm/stmw on big endian
selftests/powerpc: Fix exit status of pkey tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah :
"Five fixes to the kunit tool and documentation from Daniel Latypov and
David Gow"
* tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: move kunitconfig parsing into __init__, make it optional
kunit: tool: fix minor typing issue with None status
kunit: tool: surface and address more typing issues
Documentation: kunit: include example of a parameterized test
kunit: tool: Fix spelling of "diagnostic" in kunit_parser
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools fixes from Arnaldo Carvalho de Melo:
- Fix id index used in Intel PT for heterogeneous systems
- Fix overrun issue in 'perf script' for dynamically-allocated PMU type
number
- Fix 'perf stat' metrics containing the 'duration_time' synthetic
event
- Fix system PMU 'perf stat' metrics
* tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix overrun issue for dynamically-allocated PMU type number
perf metricgroup: Fix system PMU metrics
perf metricgroup: Fix for metrics containing duration_time
perf evlist: Fix id index for heterogeneous systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A small collection of bug-fixes and model-specific quirks"
* tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
platform/x86: thinkpad_acpi: correct palmsensor error checking
platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
platform/surface: SURFACE_PLATFORMS should depend on ACPI
platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings
tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
|
|
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.
We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.
Just ignore it and move on.
Reported-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <[email protected]>
|
|
This is basically a revert of commit 644592d32837 ("objtool: Fail the
kernel build on fatal errors").
That change turned out to be more trouble than it's worth. Failing the
build is an extreme measure which sometimes gets too much attention and
blocks CI build testing.
These fatal-type warnings aren't yet as rare as we'd hope, due to the
ever-increasing matrix of supported toolchains/plugins and their
fast-changing nature as of late.
Also, there are more people (and bots) looking for objtool warnings than
ever before, so even non-fatal warnings aren't likely to be ignored for
long.
Suggested-by: Nick Desaulniers <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Kamalesh Babulal <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
|
|
When unpacking the event which is from dynamic PMU, the array
output[OUTPUT_TYPE_MAX] may be overrun. For example, type number of SKL
uncore_imc is 10, but OUTPUT_TYPE_MAX is 7 now (OUTPUT_TYPE_MAX =
PERF_TYPE_MAX + 1).
/* In builtin-script.c */
process_event()
{
unsigned int type = output_type(attr->type);
if (output[type].fields == 0)
return;
}
output[10] is overrun.
Create a type OUTPUT_TYPE_OTHER for dynamic PMU events, then
output_type(attr->type) will return OUTPUT_TYPE_OTHER here.
Note that if PERF_TYPE_MAX ever changed, then there would be a conflict
between old perf.data files that had a dynamicaliy allocated PMU number
that would then be the same as a fixed PERF_TYPE.
Example:
# perf record --switch-events -C 0 -e "{cpu-clock,uncore_imc/data_reads/,uncore_imc/data_writes/}:SD" -a -- sleep 1
# perf script
Before:
swapper 0 [000] 1479253.987551: 277766 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.987797: 246709 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988127: 329883 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988273: 146393 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988523: 249977 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.988877: 354090 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.989023: 145940 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.989383: 359856 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1479253.989523: 140082 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
After:
swapper 0 [000] 1397040.402011: 272384 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1397040.402011: 5396 uncore_imc/data_reads/:
swapper 0 [000] 1397040.402011: 967 uncore_imc/data_writes/:
swapper 0 [000] 1397040.402259: 249153 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1397040.402259: 7231 uncore_imc/data_reads/:
swapper 0 [000] 1397040.402259: 1297 uncore_imc/data_writes/:
swapper 0 [000] 1397040.402508: 249108 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000] 1397040.402508: 5333 uncore_imc/data_reads/:
swapper 0 [000] 1397040.402508: 1008 uncore_imc/data_writes/:
Signed-off-by: Jin Yao <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Joakim reports that getting "perf stat" for multiple system PMU metrics
segfaults:
$ perf stat -a -I 1000 -M imx8mm_ddr_write.all,imx8mm_ddr_write.all
Segmentation fault
$
While the same works without issue for a single metric.
The logic in metricgroup__add_metric_sys_event_iter() is broken, in that
add_metric() @m argument should be NULL for each new metric. Fix by not
passing a holder for that, and rather make local in
metricgroup__add_metric_sys_event_iter().
Fixes: be335ec28efa ("perf metricgroup: Support adding metrics for system PMUs")
Reported-by: Joakim Zhang <[email protected]>
Signed-off-by: John Garry <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Metrics containing duration_time cause a segfault:
$ perf stat -v -M L1D_Cache_Fill_BW sleep 1
Using CPUID GenuineIntel-6-3D-4
metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
found event duration_time
found event l1d.replacement
adding {l1d.replacement}:W,duration_time
l1d.replacement -> cpu/umask=0x1,(null)=0x1e8483,event=0x51/
Segmentation fault
$
In commit c2337d67199a1ea1 ("perf metricgroup: Fix metrics using aliases
covering multiple PMUs"), the logic in find_evsel_group() when iter'ing
events was changed to not only select events in same group, but also for
aliased PMUs.
Checking whether events were for aliased PMUs was done by comparing the
event PMU name. This was not safe for duration_time event, which has no
associated PMU (and no PMU name), so fix by checking if the event PMU name
is set also.
Committer testing:
Reproduced the bug, then, on a:
$ grep -m1 ^'model name' /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$
We now get:
$ perf stat -M L1D_Cache_Fill_BW sleep 1
Performance counter stats for 'sleep 1':
4,141 l1d.replacement:u
1,001,285,107 ns duration_time:u
1.001285107 seconds time elapsed
0.000000000 seconds user
0.001119000 seconds sys
$
Detais from -v:
Using CPUID GenuineIntel-6-8E-A
metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
found event duration_time
found event l1d.replacement
adding {l1d.replacement}:W,duration_time
l1d.replacement -> cpu/(null)=0x1e8483,umask=0x1,event=0x51/
Control descriptor is not initialized
Warning:
kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples
Warning:
kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples
l1d.replacement:u: 4592 612201 612201
duration_time:u: 1001478621 1001478621 1001478621
Fixes: c2337d67199a1ea1 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs")
Reported-by: Joakim Zhang <[email protected]>
Signed-off-by: John Garry <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf_evlist__set_sid_idx() updates perf_sample_id with the evlist map
index, CPU number and TID. It is passed indexes to the evsel's cpu and
thread maps, but references the evlist's maps instead. That results in
using incorrect CPU numbers on heterogeneous systems. Fix it by using
evsel maps.
The id index (PERF_RECORD_ID_INDEX) is used by AUX area tracing when in
sampling mode. Having an incorrect CPU number causes the trace data to
be attributed to the wrong CPU, and can result in decoder errors because
the trace data is then associated with the wrong process.
Committer notes:
Keep the class prefix convention in the function name, switching from
perf_evlist__set_sid_idx() to perf_evsel__set_sid_idx().
Fixes: 3c659eedada2fbf9 ("perf tools: Add id index")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- rework the character device code to avoid a frame size warning
- fix printk format issues in gpio-tools
- warn on redefinition of the to_irq callback in core gpiolib code
- fix PWM period calculation in gpio-mvebu
- make gpio-sifive Kconfig entry consistent with other drivers
- fix a build issue in gpio-tegra
* tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra: Add missing dependencies
gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it
gpio: mvebu: fix pwm .get_state period calculation
gpiolib: add a warning on gpiochip->to_irq defined
tools: gpio: fix %llu warning in gpio-watch.c
tools: gpio: fix %llu warning in gpio-event-mon.c
gpiolib: cdev: fix frame size warning in gpio_ioctl()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-01-21
1) Fix a rare panic on SMP systems when packet reordering
happens between anti replay check and update.
From Shmulik Ladkani.
2) Fix disable_xfrm sysctl when used on xfrm interfaces.
From Eyal Birger.
3) Fix a race in PF_KEY when the availability of crypto
algorithms is set. From Cong Wang.
4) Fix a return value override in the xfrm policy selftests.
From Po-Hsu Lin.
5) Fix an integer wraparound in xfrm_policy_addr_delta.
From Visa Hankala.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix wraparound in xfrm_policy_addr_delta()
selftests: xfrm: fix test return value override issue in xfrm_policy.sh
af_key: relax availability checks for skb size calculation
xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
xfrm: Fix oops in xfrm_replay_advance_bmp
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"
* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: systemport: free dev before on error path
net: usb: cdc_ncm: don't spew notifications
net: mscc: ocelot: Fix multicast to the CPU port
tcp: Fix potential use-after-free due to double kfree()
bpf: Fix signed_{sub,add32}_overflows type handling
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
tcp: fix TCP socket rehash stats mis-accounting
net: dsa: b53: fix an off by one in checking "vlan->vid"
tcp: do not mess with cloned skbs in tcp_add_backlog()
selftests: net: fib_tests: remove duplicate log test
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
sh_eth: Fix power down vs. is_opened flag ordering
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
netfilter: rpfilter: mask ecn bits before fib lookup
udp: mask TOS bits in udp_v4_early_demux()
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
...
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a control 'ping' command to detect if perf is up and its control
interface is operational.
It will be used in following daemon patches to synchronize with record
session - when control interface is up and running, we know that perf
record is monitoring and ready to receive signals.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo ping > control
# cat ack
ack
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Budankov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding control 'stop' command to stop perf record.
When it is received, perf will set the 'done' variable to 1 to stop its
mmap ring buffer reading loop.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo stop > control
terminal 1:
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.214 MB perf.data (38280 samples) ]
#
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Budankov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a new 'evlist' control command to display all the evlist events.
When it is received, perf will scan and print current evlist into perf
record terminal.
The interface string for control file is:
evlist [-v|-g|-F]
The syntax follows perf evlist command:
-F Show just the sample frequency used for each event.
-v Show all fields.
-g Show event group information.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack -e '{cycles,instructions}'
terminal 2:
# echo evlist > control
terminal 1:
cycles
instructions
dummy:HG
terminal 2:
# echo 'evlist -v' > control
terminal 1:
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \
IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \
comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \
bpf_event: 1
terminal 2:
# echo 'evlist -g' > control
terminal 1:
{cycles,instructions}
dummy:HG
terminal 2:
# echo 'evlist -F' > control
terminal 1:
cycles: sample_freq=4000
instructions: sample_freq=4000
dummy:HG: sample_freq=4000
This new evlist command is handy to get real event names when
wildcards are used.
Adding evsel_fprintf.c object to python/perf.so build, because
it's now evlist.c dependency.
Adding PYTHON_PERF define for python/perf.so compilation, so we
can use it to compile in only evsel__fprintf from evsel_fprintf.c
object.
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Budankov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding new control events to enable/disable specific event.
The interface string for control file are:
'enable <EVENT NAME>'
'disable <EVENT NAME>'
when received the command, perf will scan the current evlist
for <EVENT NAME> and if found it's enabled/disabled.
Example session:
terminal 1:
# mkfifo control ack perf.pipe
# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe
terminal 2:
# cat perf.pipe | perf --no-pager script -i -
terminal 1:
Events disabled
NOTE Above message will show only after read side of the pipe ('>')
is started on 'terminal 2'. The 'terminal 1's bash does not execute
perf before that, hence the delyaed perf record message.
terminal 3:
# echo 'enable sched:sched_process_fork' > control
terminal 1:
event sched:sched_process_fork enabled
terminal 2:
bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056
bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057
terminal 3:
# echo 'enable sched:sched_wakeup_new' > control
terminal 1:
event sched:sched_wakeup_new enabled
terminal 2:
bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059
bash 33349 [034] 149632.228050: sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036
bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060
bash 33349 [034] 149633.950030: sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036
Committer testing:
If I use 'sched:*' and then enable all events, I can't get 'perf record'
to react to further commands, so I tested it with:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events enabled
Events disabled
And then it works as expected, so we need to fix this pre-existing
problem.
Another issue, we need to check if a event is already enabled or
disabled and change the message to be clearer, i.e.:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
If we receive a 'disable' command, then it should say:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events already disabled
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Budankov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|