| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This expands our library with as many things we could find which
both scripts we use share.
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Signed-off-by: Nicholas Piggin <[email protected]>
[mpe: Add SPDX, and fixup formatting]
Signed-off-by: Michael Ellerman <[email protected]>
|
|
Fixes after recent use of kvmalloc
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This adds an option to test the msg_pull_data helper. This
uses two options txmsg_start and txmsg_end to let the user
specify start and end bytes to pull.
The options can be used with txmsg_apply, txmsg_cork options
as well as with any of the basic tests, txmsg, txmsg_redir and
txmsg_drop (plus noisy variants) to run pull_data inline with
those tests. By giving user direct control over the variables
we can easily do negative testing as well as positive tests.
Signed-off-by: John Fastabend <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add sample application support for the bpf_msg_cork_bytes helper. This
lets the user specify how many bytes each verdict should apply to.
Similar to apply_bytes() tests these can be run as a stand-alone test
when used without other options or inline with other tests by using
the txmsg_cork option along with any of the basic tests txmsg,
txmsg_redir, txmsg_drop.
Signed-off-by: John Fastabend <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
This adds an option to test the apply_bytes helper. This option lets
the user specify an int on the command line specifying how much data
each verdict should apply to.
When this is set a map entry is set with the bytes input by the user
and then the specified program --txmsg or --txmsg_redir will use the
value and set the applied data. If no other option is set then a
default --txmsg_apply program is run. This program will drop pkts
if an error is detected on the bytes map lookup. Useful to verify
the map lookup and apply helper are working and causing a hard
error if it is not.
Signed-off-by: John Fastabend <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add sockmap option to use SK_MSG program types.
Signed-off-by: John Fastabend <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Test read and writes for BPF_PROG_TYPE_SK_MSG.
Signed-off-by: John Fastabend <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add map tests to attach BPF_PROG_TYPE_SK_MSG types to a sockmap.
Signed-off-by: John Fastabend <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Fixes for problems experienced with new GCC 8 warnings, that treated
as errors, broke the build, related to snprintf and casting issues.
(Arnaldo Carvalho de Melo, Jiri Olsa, Josh Poinboeuf)
- Fix build of new breakpoint 'perf test' entry with clang < 6, noticed
on fedora 25, 26 and 27 (Arnaldo Carvalho de Melo)
- Workaround problem with symbol resolution in 'perf annotate', using
the symbol name already present in the objdump output (Arnaldo Carvalho de Melo)
- Document 'perf top --ignore-vmlinux' (Arnaldo Carvalho de Melo)
- Fix out of bounds access on array fd when cnt is 100 in one of the
'perf test' entries, detected using 'cpptest' (Colin Ian King)
- Add support for the forced leader feature, i.e. 'perf report --group'
for a group of events not really grouped when scheduled (without using
{} to enclose the list of events in the command line) in pipe mode,
e.g.:
$ perf record -e cycles,instructions -o - kill | perf report --group -i -
- Use right type to access array elements in 'perf probe' (Masami Hiramatsu)
- Update POWER9 vendor events (those described in JSON format) (Sukadev Bhattiprolu)
- Discard head in overwrite_rb_find_range() (Yisheng Xie)
- Avoid setting 'quiet' to 'true' unnecessarily (Yisheng Xie)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
To shut up this compiler warning:
CC /tmp/build/perf/tests/bp_account.o
CC /tmp/build/perf/tests/task-exit.o
CC /tmp/build/perf/tests/sw-clock.o
tests/bp_account.c:106:20: error: pointer type mismatch ('int (*)(void)' and 'void *') [-Werror,-Wpointer-type-mismatch]
void *addr = is_x ? test_function : (void *) &the_var;
^ ~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~
1 error generated.
Noticed with clang 6 on fedora rawhide.
[perfbuilder@44490f0e7241 perf]$ clang -v
clang version 6.0.0 (tags/RELEASE_600/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Found candidate GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/8
Found candidate GCC installation: /usr/lib/gcc/x86_64-redhat-linux/8
Selected GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/8
Candidate multilib: .;@m64
Candidate multilib: 32;@m32
Selected multilib: .;@m64
[perfbuilder@44490f0e7241 perf]$
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 032db28e5fa3 ("perf tests: Add breakpoint accounting/modify test")
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Starting with recent GCC 8 builds, objtool and perf fail to build with
the following error:
../str_error_r.c: In function ‘str_error_r’:
../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict]
snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err);
The code seems harmless, but there's probably no benefit in printing the
'buf' pointer in this situation anyway, so just remove it to make GCC
happy.
Reported-by: Laura Abbott <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Tested-by: Laura Abbott <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/20180316031154.juk2uncs7baffctp@treble
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Current 'perf probe' converts the type of array-elements incorrectly. It
always converts the types as a pointer of array. This passes the "array"
type DIE to the type converter so that it can get correct "element of
array" type DIE from it.
E.g.
====
$ cat hello.c
#include <stdio.h>
void foo(int a[])
{
printf("%d\n", a[1]);
}
void main()
{
int a[3] = {4, 5, 6};
printf("%d\n", a[0]);
foo(a);
}
$ gcc -g hello.c -o hello
$ perf probe -x ./hello -D "foo a[1]"
====
Without this fix, above outputs
====
p:probe_hello/foo /tmp/hello:0x4d3 a=+4(-8(%bp)):u64
====
The "u64" means "int *", but a[1] is "int".
With this,
====
p:probe_hello/foo /tmp/hello:0x4d3 a=+4(-8(%bp)):s32
====
So, "int" correctly converted to "s32"
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: b2a3c12b7442 ("perf probe: Support tracing an entry of array")
Link: http://lkml.kernel.org/r/152129114502.31874.2474068470011496356.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There is a bug where when using 'perf annotate timerqueue_add' the
target for its only routine called with the 'callq' instruction,
'rb_insert_color', doesn't get resolved from its address when parsing
that 'callq' instruction.
That symbol resolution works when using 'perf report --tui' and then
doing annotation for 'timerqueue_add' from there, the vmlinux
dso->symbols rb_tree somehow gets in a state that we can't find that
address, that is a bug that has to be further investigated.
But since the objdump output has the function name, i.e. the raw objdump
disassembled line looks like:
So, before:
# perf annotate timerqueue_add
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq *ffffffff8184dc80
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
# perf report
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq rb_insert_color
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
And after both look the same:
# perf annotate timerqueue_add
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq rb_insert_color
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
From 'perf report' one can annotate and navigate to that 'rb_insert_color'
function, but not directly from 'perf annotate timerqueue_add', that
remains to be investigated and fixed.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We've had this since 2013, document it.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: Willy Tarreau <[email protected]>
Fixes: fc2be6968e99 ("perf symbols: Add new option --ignore-vmlinux for perf top")
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The gcc 8 compiler won't compile the python extension code with the
following errors (one example):
python.c:830:15: error: cast between incompatible function types from \
‘PyObject * (*)(struct pyrf_evsel *, PyObject *, PyObject *)’ \
uct _object * (*)(struct pyrf_evsel *, struct _object *, struct _object *)’} to \
‘PyObject * (*)(PyObject *, PyObject *)’ {aka ‘struct _object * (*)(struct _objeuct \
_object *)’} [-Werror=cast-function-type]
.ml_meth = (PyCFunction)pyrf_evsel__open,
The problem with the PyMethodDef::ml_meth callback is that its type is
determined based on the PyMethodDef::ml_flags value, which we set as
METH_VARARGS | METH_KEYWORDS.
That indicates that the callback is expecting an extra PyObject* arg, and is
actually PyCFunctionWithKeywords type, but the base PyMethodDef::ml_meth type
stays PyCFunction.
Previous gccs did not find this, gcc8 now does. Fixing this by silencing this
warning for python.c build.
Commiter notes:
Do not do that for CC=clang, as it breaks the build in some clang
versions, like the ones in fedora up to fedora27:
fedora:25:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
fedora:26:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
fedora:27:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
#
those have:
clang version 3.9.1 (tags/RELEASE_391/final)
The one in rawhide accepts that:
clang version 6.0.0 (tags/RELEASE_600/final)
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
glibc keeps getting cleverer, and my version now turns raise() into
more than one syscall. Since the test relies on ptrace seeing an
exact set of syscalls, this breaks the test. Replace raise(SIGSTOP)
with syscall(SYS_tgkill, ...) to force glibc to get out of our way.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Reported-by: David Ahern <[email protected]>
Fixes: 1fad59ea1c34 ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test")
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"Another set of melted spectrum updates:
- Iron out the last late microcode loading issues by actually
checking whether new microcode is present and preventing the CPU
synchronization to run into a timeout induced hang.
- Remove Skylake C2 from the microcode blacklist according to the
latest Intel documentation
- Fix the VM86 POPF emulation which traps if VIP is set, but VIF is
not. Enhance the selftests to catch that kind of issue
- Annotate indirect calls/jumps for objtool on 32bit. This is not a
functional issue, but for consistency sake its the right thing to
do.
- Fix a jump label build warning observed on SPARC64 which uses 32bit
storage for the code location which is casted to 64 bit pointer w/o
extending it to 64bit first.
- Add two new cpufeature bits. Not really an urgent issue, but
provides them for both x86 and x86/kvm work. No impact on the
current kernel"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Fix CPU synchronization routine
x86/microcode: Attempt late loading only when new microcode is present
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
jump_label: Fix sparc64 warning
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
x86/vm86/32: Fix POPF emulation
selftests/x86/entry_from_vm86: Add test cases for POPF
selftests/x86/entry_from_vm86: Exit with 1 if we fail
x86/cpufeatures: Add Intel PCONFIG cpufeature
x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
|
|
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Linux 4.16-rc5 merged into the GPIO devel branch to resolve
a nasty conflict between fixes and devel in the RCAR driver.
Signed-off-by: Linus Walleij <[email protected]>
|
|
This test checks that MTU configured from userspace is used on
link creation and changes, and that when it's not passed from
userspace, it's calculated properly from the MTU of the lower
layer.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Same as pmtu_vti4_link_add_mtu test, but for IPv6.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This test checks that MTU given on vti link creation is actually
configured, and that tunnel is not created with an invalid MTU
value.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This test checks that PMTU exceptions are created only when
needed on IPv4 routes with vti and xfrm, and their PMTU value is
checked as well.
We can't adopt the same approach as test_pmtu_vti6_exception()
here, because on IPv4 administrative MTU changes won't be
reflected directly on PMTU.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This test checks that the MTU assigned by default to a vti (IPv4)
interface created on top of veth is simply veth's MTU minus the
length of the encapsulated IPv4 header.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Introduce list of tests and their descriptions, and loop on it
in main body.
Tests will now just take care of calling setup with a list of
"units" they need, and return 0 on success, 1 on failure, 2 if
the test had to be skipped.
Main script body will take care of displaying results and
cleaning up after every test. Introduce guard variable so that
we don't clean up twice in case of interrupts or unexpected
failures.
The pmtu_vti6_exception test can now run its third step even if
the previous one failed, as we can return values from it.
Also introduce support to display test descriptions, and display
aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that
in case of failure we can display them right under the outcome
for each test.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
...so that it can be used for any iproute command output.
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I
accidentally assumed route_get_* helpers would run from a single
namespace. Make them a bit more generic, by passing the
namespace command prefix as a parameter instead.
Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
David suggests it's more intuitive to return non-zero on
failures, and zero on success.
No need to introduce tail 'return 0' in functions, they will
return the exit code of the last command anyway.
Suggested-by: David Ahern <[email protected]>
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Allowing a guest to execute MWAIT without interception enables a guest
to put a (physical) CPU into a power saving state, where it takes
longer to return from than what may be desired by the host.
Don't give a guest that power over a host by default. (Especially,
since nothing prevents a guest from using MWAIT even when it is not
advertised via CPUID.)
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Cc: Jan H. Schönherr <[email protected]>
Signed-off-by: Wanpeng Li <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When using --quiet to disable messages, we will set the 'quiet' variable
to 'true' first, then check that variable to decide whether we need to
call perf_quiet_option(), so no need to set 'quiet' to 'true' once more
in perf_quiet_option().
Signed-off-by: Yisheng Xie <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In overwrite mode, start will be set to head in perf_mmap__read_init().
Therefore, there is no need to set the start one more time in
overwrite_rb_find_range() and *start can be used as head instead of
passing head to overwrite_rb_find_range().
Signed-off-by: Yisheng Xie <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a way to configure if poll() should wait forever for an event, the
number of packets that should be sent for each and if there should be
any delay between packets.
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Cc: [email protected]
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Stephane reported a problem with forced leader in pipe mode, where
report does not force the group output. The reason is that we don't
force the leader in pipe mode.
This patch adds HEADER_LAST_FEATURE mark to have a point where we have
all events and features received, and force the group if requested.
$ perf record --group -e '{cycles, instructions}' -o - kill | perf report -i - --group
SNIP
# Overhead Command Shared Object Symbol
# ................ ....... ................ .......................
#
28.36% 0.00% kill libc-2.25.so [.] __unregister_atfork
26.32% 0.00% kill libc-2.25.so [.] _dl_addr
26.10% 0.00% kill ld-2.25.so [.] _dl_relocate_object
17.32% 0.00% kill ld-2.25.so [.] __tunables_init
1.70% 0.01% kill [unknown] [k] 0xffffffffafa01a40
0.20% 0.00% kill ld-2.25.so [.] _start
0.00% 48.77% kill ld-2.25.so [.] do_lookup_x
0.00% 42.97% kill libc-2.25.so [.] _IO_getline
0.00% 6.35% kill ld-2.25.so [.] strcmp
0.00% 1.71% kill ld-2.25.so [.] _dl_sysdep_start
0.00% 0.19% kill ld-2.25.so [.] _dl_start
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Stephane Eranian <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need to synthesize events first, because some features works on top
of them (on report side).
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Stephane Eranian <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently when cnt is 100 an array bounds overflow occurs on the
assignment of fd[cnt]. Fix this by performing the bounds check on cnt
before writing to fd.
Detected by cppcheck:
tools/perf/tests/bp_account.c:115: (warning) Either the condition
'cnt==100' is redundant or the array 'fd[100]' is accessed at index 100,
which is out of bounds.
Signed-off-by: Colin King <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Fixes: 032db28e5fa3 ("perf tests: Add breakpoint accounting/modify test")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We were using a local buffer with an arbitrary size, that would have to
get increased to avoid truncation as warned by gcc 8:
util/annotate.c: In function 'symbol__disassemble':
util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=]
"%s %s%s --start-address=0x%016" PRIx64
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/annotate.c:1498:20:
symfs_filename, symfs_filename);
~~~~~~~~~~~~~~
util/annotate.c:1490:50: note: format string is defined here
" -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand",
^~
In file included from /usr/include/stdio.h:861,
from util/color.h:5,
from util/sort.h:8,
from util/annotate.c:14:
/usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So switch to asprintf, that will make sure enough space is available.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This fixes record+probe_libc_inet_pton.sh from always exiting with code
0 and making the test pass even if the perf script output does not match
the expected pattern.
The issue can be observed if this test is run with the verbose flags as
shown below:
60: probe libc's inet_pton & backtrace it with ping :
...
ping 19602 [006] 16988.413767: probe_libc:inet_pton: (7fff9a2c42e8)
1842e8 __GI___inet_pton (/usr/lib64/libc-2.26.so)
130db4 getaddrinfo (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 3 ".*\(.*/bin/ping.*\)$" got ""
test child finished with 0
...
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Leo reported broken -k option behavior. The reason is that we used
symbol_conf.vmlinux_name as a source for mmap event name, but in fact
it's a vmlinux path.
Moving the symbol_conf.vmlinux_name check for both host and guest to the
proper place and out of the machine__set_mmap_name function.
Reported-by: Leo Yan <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Leo Yan <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: commit ("8c7f1bb37b29 perf machine: Move kernel mmap name into struct machine")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Function perf_stat_evsel_id_init() has global linkage but is only used
in util/stat.c. Make it static.
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In addition to template, display also the real compile command line with
all the variables substituted.
llvm compiling command template: $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS ...
llvm compiling command : /usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=24 -DLINUX_VERSION_CODE=0x41000 ...
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When trying to add the "call-graph" variable for top into the
.perfconfig file, like:
[top]
call-graph = fp
I that perf_top_config() do not parse this variable.
Fix it by calling perf_default_config() when the top.call-graph variable
is set.
Signed-off-by: Yisheng Xie <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: b8cbb349061e ("perf config: Bring perf_default_config to the very beginning at main()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We have brought perf_default_config to the very beginning at main(), so
it no need to call perf_default_config() once more for most of config in
perf-record but only for record.call-graph.
Signed-off-by: Yisheng Xie <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Path passed to libdw for unwinding doesn't include symfs path
if specified, so unwinding fails because ELF file is not found.
Similar to unwinding with libunwind, pass symsrc_filename instead
of long_name. If there is no symsrc_filename, fallback to long_name.
Signed-off-by: Martin Vuille <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There is MIDR change on ThunderX2 B0, adding an entry to mapfile to
enable JSON events for B0.
Signed-off-by: Ganapatrao Kulkarni <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Jayachandran C <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robert Richter <[email protected]>
Cc: William Cohen <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
[ Fixup wrt recent patchset by John Garry ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|