aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-11-11perf arm-spe: Refactor arm_spe_get_events()Leo Yan1-4/+2
In function arm_spe_get_events(), the event packet's 'index' is assigned as payload length, but the flow is not directive: it firstly gets the packet length from the return value of arm_spe_get_payload(), the value includes header length (1) and payload length: int ret = arm_spe_get_payload(buf, len, packet); and then reduces header length from packet length, so finally get the payload length: packet->index = ret - 1; To simplify the code, this patch directly assigns payload length to event packet's index; and at the end it calls arm_spe_get_payload() to return the payload value. Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf arm-spe: Refactor payload size calculationLeo Yan1-9/+9
This patch defines macro to extract "sz" field from header, and renames the function payloadlen() to arm_spe_payload_len(). Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf arm-spe: Fix a typo in commentLeo Yan1-1/+1
Fix a typo: s/iff/if. Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf arm-spe: Include bitops.h for BIT() macroLeo Yan2-8/+4
Include header linux/bitops.h, directly use its BIT() macro and remove the self defined macros. Committer notes: Use BIT_ULL() instead of BIT to build on 32-bit arches as mentioned in review by Andre Przywara <[email protected]>. I noticed the build failure when crossbuilding to arm32 from x86_64. Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf mem: Support ARM SPE eventsLeo Yan2-1/+38
This patch adds ARM SPE events for perf memory profiling: 'spe-load': event for only recording memory load ops; 'spe-store': event for only recording memory store ops; 'spe-ldst': event for recording memory load and store ops. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf c2c: Support AUX traceLeo Yan1-0/+12
This patch adds the AUX callbacks in session structure, so support AUX trace for "perf c2c" tool; make itrace memory event as default for "perf c2c", this tells the AUX trace decoder to synthesize samples and can be used for statistics. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf mem: Support AUX traceLeo Yan1-0/+13
The 'perf mem' tool doesn't support AUX trace data so it cannot receive the hardware tracing data. On arm64, although it doesn't support PMU events for memory load and store, ARM SPE is a good candidate for memory profiling, the hardware tracer can record memory accessing operations with affiliated information (e.g. physical address and virtual address for accessing, cache levels, TLB walking, latency, etc). To allow "perf mem" tool to support AUX trace, this patch adds the AUX callbacks for session structure; make itrace memory event as default for "perf mem", this tells the AUX trace decoder to synthesize memory samples. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf auxtrace: Add itrace option '-M' for memory eventsLeo Yan3-0/+7
This patch is to add itrace option '-M' to synthesize memory event. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf mem: Only initialize memory event for recordingLeo Yan1-5/+5
It's needless to initialize memory events for reporting, this patch moves memory event initialization for only recording. Furthermore, the change allows to parse perf data on cross platforms, e.g. perf tool can report result properly even the machine doesn't support the memory events. Signed-off-by: Leo Yan <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf c2c: Support memory event PERF_MEM_EVENTS__LOAD_STORELeo Yan1-4/+13
When user doesn't specify event name, perf c2c tool enables both the load and store events, and this leads to failure for opening the duplicate PMU device for AUX trace. After the memory event PERF_MEM_EVENTS__LOAD_STORE is introduced, when the user doesn't specify event name, this patch converts the required operation to PERF_MEM_EVENTS__LOAD_STORE if the arch supports it. Otherwise, the tool still rolls back to enable events PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf mem: Support new memory event PERF_MEM_EVENTS__LOAD_STORELeo Yan3-7/+31
On the architectures with perf memory profiling, two types of hardware events have been supported: load and store; if want to profile memory for both load and store operations, the tool will use these two events at the same time, the usage is: # perf mem record -t load,store -- uname But this cannot be applied for AUX tracing event, the same PMU event can be used to only trace memory load, or only memory store, or trace for both memory load and store. This patch introduces a new event PERF_MEM_EVENTS__LOAD_STORE, which is used to support the event which can record both memory load and store operations. When user specifies memory operation type as 'load,store', or doesn't set type so use 'load,store' as default, if the arch supports the event PERF_MEM_EVENTS__LOAD_STORE, the tool will convert the required operations to this single event; otherwise, if the arch doesn't support PERF_MEM_EVENTS__LOAD_STORE, the tool rolls back to enable both events PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE, which keeps the same behaviour with before. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf mem: Introduce weak function perf_mem_events__ptr()Leo Yan4-21/+46
Different architectures might use different event or different event parameters for memory profiling, this patch introduces a weak perf_mem_events__ptr() function which allows to return back a architecture specific memory event. Since the variable 'perf_mem_events' can be only accessed by the perf_mem_events__ptr() function, mark the variable as 'static', this allows the architectures to define its own memory event array. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-11perf mem: Search event name with more flexible pathLeo Yan1-3/+3
The perf tool searches a memory event name under the folder '/sys/devices/cpu/events/', this leads to the limitation for the selection of a memory profiling event which must be under this folder. Thus it's impossible to use any other event as memory event which is not under this specific folder, e.g. Arm SPE hardware event is not located in '/sys/devices/cpu/events/' so it cannot be enabled for memory profiling. This patch changes to search folder from '/sys/devices/cpu/events/' to '/sys/devices', so it give flexibility to find events which can be used for memory profiling. Signed-off-by: Leo Yan <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-10selftest/bpf: Add missed ip6ip6 test backHangbin Liu2-39/+46
In comment 173ca26e9b51 ("samples/bpf: add comprehensive ipip, ipip6, ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit 933a741e3b82 ("selftests/bpf: bpf tunnel test.") when we moved it to the current folder, we didn't add it. This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's topology for both IPv4 and IPv6 testing. Since iperf test is removed as currect framework simplified it in purpose, I also removed unused tcp checkings in test_tunnel_kern.c. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10tools/bpftool: Add support for in-kernel and named BTF in `btf show`Andrii Nakryiko1-1/+27
Display vmlinux BTF name and kernel module names when listing available BTFs on the system. In human-readable output mode, module BTFs are reported with "name [module-name]", while vmlinux BTF will be reported as "name [vmlinux]". Square brackets are added by bpftool and follow kernel convention when displaying modules in human-readable text outputs. [vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s 1: name [vmlinux] size 4082281B 6: size 2365B prog_ids 8,6 map_ids 3 7: name [button] size 46895B 8: name [pcspkr] size 42328B 9: name [serio_raw] size 39375B 10: name [floppy] size 57185B 11: name [i2c_core] size 76186B 12: name [crc32c_intel] size 16036B 13: name [i2c_piix4] size 50497B 14: name [irqbypass] size 14124B 15: name [kvm] size 197985B 16: name [kvm_intel] size 123564B 17: name [cryptd] size 42466B 18: name [crypto_simd] size 17187B 19: name [glue_helper] size 39205B 20: name [aesni_intel] size 41034B 25: size 36150B pids bpftool(2519) In JSON mode, two fields (boolean "kernel" and string "name") are reported for each BTF object. vmlinux BTF is reported with name "vmlinux" (kernel itself returns and empty name for vmlinux BTF). [vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s -jp [{ "id": 1, "size": 4082281, "prog_ids": [], "map_ids": [], "kernel": true, "name": "vmlinux" },{ "id": 6, "size": 2365, "prog_ids": [8,6 ], "map_ids": [3 ], "kernel": false },{ "id": 7, "size": 46895, "prog_ids": [], "map_ids": [], "kernel": true, "name": "button" },{ ... Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Tested-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10bpf: Assign ID to vmlinux BTF and return extra info for BTF in GET_OBJ_INFOAndrii Nakryiko1-0/+3
Allocate ID for vmlinux BTF. This makes it visible when iterating over all BTF objects in the system. To allow distinguishing vmlinux BTF (and later kernel module BTF) from user-provided BTFs, expose extra kernel_btf flag, as well as BTF name ("vmlinux" for vmlinux BTF, will equal to module's name for module BTF). We might want to later allow specifying BTF name for user-provided BTFs as well, if that makes sense. But currently this is reserved only for in-kernel BTFs. Having in-kernel BTFs exposed IDs will allow to extend BPF APIs that require in-kernel BTF type with ability to specify BTF types from kernel modules, not just vmlinux BTF. This will be implemented in a follow up patch set for fentry/fexit/fmod_ret/lsm/etc. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10selftests: disable rp_filter when testing bareudpGuillaume Nault1-0/+6
Some systems have rp_filter=1 as default configuration. This breaks bareudp.sh as the intermediate namespaces handle part of the routing with regular IPv4 routes but the reverse path is done with tc (flower/tunnel_key/mirred). Signed-off-by: Guillaume Nault <[email protected]> Link: https://lore.kernel.org/r/28140b7d20161e4f766b558018fe2718f9bc1117.1604767577.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-10selftest: fix flower terse dump testsVlad Buslov1-2/+2
Iproute2 tc classifier terse dump has been accepted with modified syntax. Update the tests accordingly. Signed-off-by: Vlad Buslov <[email protected]> Fixes: e7534fd42a99 ("selftests: implement flower classifier terse dump tests") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-10selftests/cgroup: Fix build on older distrosSachin Sant1-2/+2
On older distros struct clone_args does not have a cgroup member, leading to build errors: cgroup_util.c: In function 'clone_into_cgroup': cgroup_util.c:343:4: error: 'struct clone_args' has no member named 'cgroup' cgroup_util.c:346:33: error: invalid application of 'sizeof' to incomplete type 'struct clone_args' But the selftests already have a locally defined version of the structure which is up to date, called __clone_args. So use __clone_args which fixes the error. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Sachin Sant <[email protected]>> Acked-by: Christian Brauner <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests/run_kselftest.sh: fix dry-run typoHangbin Liu1-1/+1
Should be -d instead of -n for dry-run. Fixes: 5da1918446a1 ("selftests/run_kselftest.sh: Make each test individually selectable") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10tool: selftests: fix spelling typo of 'writting'Wang Qing1-2/+2
writting -> writing Signed-off-by: Wang Qing <[email protected]> Reviewed-by: Mike Rapoport <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests/memfd: Fix implicit declaration warningsMichael Ellerman2-2/+2
The memfd tests emit several warnings: fuse_test.c:261:7: warning: implicit declaration of function 'open' fuse_test.c:67:6: warning: implicit declaration of function 'fcntl' memfd_test.c:397:6: warning: implicit declaration of function 'fallocate' memfd_test.c:64:7: warning: implicit declaration of function 'open' memfd_test.c:90:6: warning: implicit declaration of function 'fcntl' These are all caused by the test not including fcntl.h. Instead of including linux/fcntl.h, include fcntl.h, which should eventually cause the former to be included as well. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests: intel_pstate: ftime() is deprecatedTommi Rantala1-6/+16
Use clock_gettime() instead of deprecated ftime(). aperf.c: In function ‘main’: aperf.c:58:2: warning: ‘ftime’ is deprecated [-Wdeprecated-declarations] 58 | ftime(&before); | ^~~~~ In file included from aperf.c:9: /usr/include/sys/timeb.h:39:12: note: declared here 39 | extern int ftime (struct timeb *__timebuf) | ^~~~~ Signed-off-by: Tommi Rantala <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests/gpio: Add to CLEAN rule rather than overridingMichael Ellerman1-4/+1
Rather than overriding the CLEAN rule we can just append to it. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests/gpio: Fix build when source tree is read onlyMichael Ellerman1-5/+9
Currently the gpio selftests fail to build if the source tree is read only: make -j 160 -C tools/testing/selftests TARGETS=gpio make[1]: Entering directory '/linux/tools/testing/selftests/gpio' make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio make[2]: Entering directory '/linux/tools/gpio' mkdir -p /linux/tools/gpio/include/linux 2>&1 || true ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system This happens because we ask make to build ../../../gpio (tools/gpio) without pointing OUTPUT away from the source directory. To fix it we create a subdirectory of the existing OUTPUT directory, called tools-gpio, and tell tools/gpio to build in there. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests/gpio: Move include of lib.mk upMichael Ellerman1-3/+3
Move the include of lib.mk up so that in a subsequent patch we can use OUTPUT, which is initialised by lib.mk, in the definition of the GPIO variables. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10selftests/gpio: Use TEST_GEN_PROGS_EXTENDEDMichael Ellerman1-5/+3
Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED. That tells the lib.mk logic that the files it references are to be generated by the Makefile. Having done that we don't need to override the all rule. Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: tool: fix extra trailing \n in raw + parsed test outputDaniel Latypov2-3/+4
For simplcity, strip all trailing whitespace from parsed output. I imagine no one is printing out meaningful trailing whitespace via KUNIT_FAIL() or similar, and that if they are, they really shouldn't. `isolate_kunit_output()` yielded liens with trailing \n, which results in artifacty output like this: $ ./tools/testing/kunit/kunit.py run [16:16:46] [FAILED] example_simple_test [16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29 [16:16:46] Expected 1 + 1 == 3, but [16:16:46] 1 + 1 == 2 [16:16:46] 3 == 3 [16:16:46] not ok 1 - example_simple_test [16:16:46] After this change: [16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29 [16:16:46] Expected 1 + 1 == 3, but [16:16:46] 1 + 1 == 2 [16:16:46] 3 == 3 [16:16:46] not ok 1 - example_simple_test [16:16:46] We should *not* be expecting lines to end with \n in kunit_tool_test.py for this reason. Do the same for `raw_output()` as well which suffers from the same issue. This is a followup to [1], but rebased onto kunit-fixes to pick up the other raw_output() fix and fixes for kunit_tool_test.py. [1] https://lore.kernel.org/linux-kselftest/[email protected]/ Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: tool: print out stderr from make (like build warnings)Daniel Latypov1-4/+9
Currently the tool redirects make stdout + stderr, and only shows them if the make command fails. This means build warnings aren't shown to the user. This change prints the contents of stderr even if make succeeds, under the assumption these are only build warnings or other messages the user likely wants to see. We drop stdout from the raised exception since we can no longer easily collate stdout and stderr and just showing the stderr seems fine. Example with a warning: [14:56:35] Building KUnit Kernel ... ../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’: ../lib/kunit/kunit-test.c:19:6: warning: unused variable ‘unused’ [-Wunused-variable] 19 | int unused; | ^~~~~~ [14:56:40] Starting KUnit Kernel ... Note the stderr has a trailing \n, and since we use print, we add another, but it helps separate make and kunit.py output. Example with a build error: [15:02:45] Building KUnit Kernel ... ERROR:root:../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’: ../lib/kunit/kunit-test.c:19:2: error: unknown type name ‘invalid_type’ 19 | invalid_type *test = data; | ^~~~~~~~~~~~ ... Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: Do not pollute source directory with generated files (test.log)Andy Shevchenko1-3/+11
When --build_dir is provided use it and do not pollute source directory which even can be mounted over network or read-only. Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: Do not pollute source directory with generated files (.kunitconfig)Andy Shevchenko2-18/+31
When --build_dir is provided use it and do not pollute source directory which even can be mounted over network or read-only. Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: tool: fix pre-existing python type annotation errorsDaniel Latypov1-7/+7
The code uses annotations, but they aren't accurate. Note that type checking in python is a separate process, running `kunit.py run` will not check and complain about invalid types at runtime. Fix pre-existing issues found by running a type checker $ mypy *.py All but one of these were returning `None` without denoting this properly (via `Optional[Type]`). Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: Fix kunit.py parse subcommand (use null build_dir)David Gow1-1/+1
When JSON support was added in [1], the KunitParseRequest tuple was updated to contain a 'build_dir' field, but kunit.py parse doesn't accept --build_dir as an option. The code nevertheless tried to access it, resulting in this error: AttributeError: 'Namespace' object has no attribute 'build_dir' Given that the parser only uses the build_dir variable to set the 'build_environment' json field, we set it to None (which gives the JSON 'null') for now. Ultimately, we probably do want to be able to set this, but since it's new functionality which (for the parse subcommand) never worked, this is the quickest way of getting it back up and running. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit-fixes&id=21a6d1780d5bbfca0ce9b8104ca6233502fcbf86 Fixes: 21a6d1780d5b ("kunit: tool: allow generating test results in JSON") Signed-off-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10kunit: tool: unmark test_data as binary blobsBrendan Higgins1-1/+0
The tools/testing/kunit/test_data/ directory was marked as binary because some of the test_data files cause checkpatch warnings. Fix this by dropping the .gitattributes file. Fixes: afc63da64f1e ("kunit: kunit_parser: make parser more robust") Signed-off-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-11-10Merge branch 'turbostat' of ↵Linus Torvalds4-138/+507
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "Update update to version 20.09.30, one kernel side fix" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number powercap: restrict energy meter to root access tools/power turbostat: harden against cpu hotplug tools/power turbostat: adjust for temperature offset tools/power turbostat: Build with _FILE_OFFSET_BITS=64 tools/power turbostat: Support AMD Family 19h tools/power turbostat: Remove empty columns for Jacobsville tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz. tools/power x86_energy_perf_policy: Input/output error in a VM tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled tools/power turbostat: Support additional CPU model numbers tools/power turbostat: Fix output formatting for ACPI CST enumeration tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0 tools/power turbostat: Enable accumulate RAPL display tools/power turbostat: Introduce functions to accumulate RAPL consumption tools/power turbostat: Make the energy variable to be 64 bit tools/power turbostat: Always print idle in the system configuration header tools/power turbostat: Print /dev/cpu_dma_latency
2020-11-10tools/power turbostat: update version numberLen Brown1-1/+1
goodbye summer... Signed-off-by: Len Brown <[email protected]>
2020-11-10Merge v5.10-rc3 into drm-nextDaniel Vetter80-144/+486
We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") to be able to merge Jason's cleanup patch. Signed-off-by: Daniel Vetter <[email protected]>
2020-11-09selftests/net: test max_num_members, fanout_args in psock_fanoutTanner Love1-3/+69
Add an additional control test that verifies: -specifying two different max_num_members values fails -specifying max_num_members > PACKET_FANOUT_MAX fails In datapath tests, set max_num_members to PACKET_FANOUT_MAX. Signed-off-by: Tanner Love <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-09bpf: selftest: Use static globals in tcp_hdr_options and btf_skc_cls_ingressMartin KaFai Lau2-7/+7
Some globals in the tcp_hdr_options test and btf_skc_cls_ingress test are not using static scope. This patch fixes it. Targeting bpf-next branch as an improvement since it currently does not break the build. Fixes: ad2f8eb0095e ("bpf: selftests: Tcp header options") Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress") Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds23-277/+2252
Pull kvm fixes from Paolo Bonzini: "ARM: - fix compilation error when PMD and PUD are folded - fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1 - add aarch64 get-reg-list test x86: - fix semantic conflict between two series merged for 5.10 - fix (and test) enforcement of paravirtual cpuid features selftests: - various cleanups to memory management selftests - new selftests testcase for performance of dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) KVM: selftests: allow two iterations of dirty_log_perf_test KVM: selftests: Introduce the dirty log perf test KVM: selftests: Make the number of vcpus global KVM: selftests: Make the per vcpu memory size global KVM: selftests: Drop pointless vm_create wrapper KVM: selftests: Add wrfract to common guest code KVM: selftests: Simplify demand_paging_test with timespec_diff_now KVM: selftests: Remove address rounding in guest code KVM: selftests: Factor code out of demand_paging_test KVM: selftests: Use a single binary for dirty/clear log test KVM: selftests: Always clear dirty bitmap after iteration KVM: selftests: Add blessed SVE registers to get-reg-list KVM: selftests: Add aarch64 get-reg-list test selftests: kvm: test enforcement of paravirtual cpuid features selftests: kvm: Add exception handling to selftests selftests: kvm: Clear uc so UCALL_NONE is being properly reported selftests: kvm: Fix the segment descriptor layout to match the actual layout KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs kvm: x86: request masterclock update any time guest uses different msr kvm: x86: ensure pv_cpuid.features is initialized when enabling cap ...
2020-11-09libbpf: Don't attempt to load unused subprog as an entry-point BPF programAndrii Nakryiko3-10/+40
If BPF code contains unused BPF subprogram and there are no other subprogram calls (which can realistically happen in real-world applications given sufficiently smart Clang code optimizations), libbpf will erroneously assume that subprograms are entry-point programs and will attempt to load them with UNSPEC program type. Fix by not relying on subcall instructions and rather detect it based on the structure of BPF object's sections. Fixes: 9a94f277c4fb ("tools: libbpf: restore the ability to load programs from .text section") Reported-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-09KVM: selftests: allow two iterations of dirty_log_perf_testPaolo Bonzini1-1/+1
Even though one iteration is not enough for the dirty log performance test (due to the cost of building page tables, zeroing memory etc.) two is okay and it is the default. Without this patch, "./dirty_log_perf_test" without any further arguments fails. Cc: Ben Gardon <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Introduce the dirty log perf testBen Gardon6-8/+396
The dirty log perf test will time verious dirty logging operations (enabling dirty logging, dirtying memory, getting the dirty log, clearing the dirty log, and disabling dirty logging) in order to quantify dirty logging performance. This test can be used to inform future performance improvements to KVM's dirty logging infrastructure. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Make the number of vcpus globalAndrew Jones2-20/+20
We also check the input number of vcpus against the maximum supported. Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Make the per vcpu memory size globalAndrew Jones2-12/+11
Rename vcpu_memory_bytes to something with "percpu" in it in order to be less ambiguous. Also make it global to simplify things. Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Drop pointless vm_create wrapperAndrew Jones4-9/+3
Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Add wrfract to common guest codeBen Gardon2-1/+7
Wrfract will be used by the dirty logging perf test introduced later in this series to dirty memory sparsely. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Simplify demand_paging_test with timespec_diff_nowBen Gardon3-15/+27
Add a helper function to get the current time and return the time since a given start time. Use that function to simplify the timekeeping in the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Remove address rounding in guest codeBen Gardon1-1/+0
Rounding the address the guest writes to a host page boundary will only have an effect if the host page size is larger than the guest page size, but in that case the guest write would still go to the same host page. There's no reason to round the address down, so remove the rounding to simplify the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-11-08KVM: selftests: Factor code out of demand_paging_testBen Gardon2-181/+210
Much of the code in demand_paging_test can be reused by other, similar multi-vCPU-memory-touching-perfromance-tests. Factor that common code out for reuse. No functional change expected. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.