aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2019-04-08selftests: fib_tests: Add tests for ipv6 gateway with ipv4 routeDavid Ahern1-1/+69
Add tests for ipv6 gateway with ipv4 route. Tests include basic single path with ping to verify connectivity and multipath. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-08kselftests: extend nft_nat with inet family based nat hooksFlorian Westphal1-36/+94
With older nft versions, this will cause: [..] PASS: ipv6 ping to ns1 was ip6 NATted to ns2 /dev/stdin:4:30-31: Error: syntax error, unexpected to, expecting newline or semicolon ip daddr 10.0.1.99 dnat ip to 10.0.2.99 ^^ SKIP: inet nat tests PASS: ip IP masquerade for ns2 [..] as there is currently no way to detect if nft will be able to parse the inet format. redirect and masquerade tests need to be skipped in this case for inet too because nft userspace has overzealous family check and rejects their use in the inet family. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-04-08tools/io_uring: remove IOCQE_FLAG_CACHEHITJens Axboe1-28/+4
This ended up not being included in the mainline version of io_uring, so drop it from the test app as well. Signed-off-by: Jens Axboe <[email protected]>
2019-04-08tools/testing/nvdimm: Retain security state after overwriteDave Jiang1-2/+4
Overwrite retains the security state after completion of operation. Fix nfit_test to reflect this so that the kernel can test the behavior it is more likely to see in practice. Fixes: 926f74802cb1 ("tools/testing/nvdimm: Add overwrite support for nfit_test") Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal1-2/+0
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2019-04-07selftests: add a tc matchall test caseNicolas Dichtel1-0/+20
This is a follow up of the commit 0db6f8befc32 ("net/sched: fix ->get helper of the matchall cls"). To test it: $ cd tools/testing/selftests/tc-testing $ ln -s ../plugin-lib/nsPlugin.py plugins/20-nsPlugin.py $ ./tdc.py -n -e 2638 Signed-off-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-06libbpf: Ignore -Wformat-nonliteral warningAndrey Ignatov1-0/+5
vsprintf() in __base_pr() uses nonliteral format string and it breaks compilation for those who provide corresponding extra CFLAGS, e.g.: https://github.com/libbpf/libbpf/issues/27 If libbpf is built with the flags from PR: libbpf.c:68:26: error: format string is not a string literal [-Werror,-Wformat-nonliteral] return vfprintf(stderr, format, args); ^~~~~~ 1 error generated. Ignore this warning since the use case in libbpf.c is legit. Signed-off-by: Andrey Ignatov <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-06selftests: forwarding: test for bridge mcast traffic after report and leaveNikolay Aleksandrov1-0/+152
This test is split in two, the first part checks if a report creates a corresponding mdb entry and if traffic is properly forwarded to it, and the second part checks if the mdb entry is deleted after a leave and if traffic is *not* forwarded to it. Since the mcast querier is enabled we should see standard mcast snooping bridge behaviour. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller40-198/+757
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <[email protected]>
2019-04-05selftests/bpf: Test unbounded var_off stack accessAndrey Ignatov1-2/+55
Test the case when reg->smax_value is too small/big and can overflow, and separately min and max values outside of stack bounds. Example of output: # ./test_verifier #856/p indirect variable-offset stack access, unbounded OK #857/p indirect variable-offset stack access, max out of bound OK #858/p indirect variable-offset stack access, min out of bound OK Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-05selftests/bpf: Test indirect var_off stack access in unpriv modeAndrey Ignatov1-0/+27
Test that verifier rejects indirect stack access with variable offset in unprivileged mode and accepts same code in privileged mode. Since pointer arithmetics is prohibited in unprivileged mode verifier should reject the program even before it gets to helper call that uses variable offset, at the time when that variable offset is trying to be constructed. Example of output: # ./test_verifier ... #859/u indirect variable-offset stack access, priv vs unpriv OK #859/p indirect variable-offset stack access, priv vs unpriv OK Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-05selftests/bpf: Test indirect var_off stack access in raw modeAndrey Ignatov1-0/+27
Test that verifier rejects indirect access to uninitialized stack with variable offset. Example of output: # ./test_verifier ... #859/p indirect variable-offset stack access, uninitialized OK Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-05objtool: Add rewind_stack_do_exit() to the noreturn listJosh Poimboeuf1-0/+1
This fixes the following warning seen on GCC 7.3: arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs() Reported-by: kbuild test robot <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.com
2019-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-15/+191
Pull networking fixes from David Miller: 1) Several hash table refcount fixes in batman-adv, from Sven Eckelmann. 2) Use after free in bpf_evict_inode(), from Daniel Borkmann. 3) Fix mdio bus registration in ixgbe, from Ivan Vecera. 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni. 5) ila rhashtable corruption fix from Herbert Xu. 6) Don't allow upper-devices to be added to vrf devices, from Sabrina Dubroca. 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork. 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype, from Alexander Lobakin. 9) Missing IDR checks in mlx5 driver, from Aditya Pakki. 10) Fix false connection termination in ktls, from Jakub Kicinski. 11) Work around some ASPM issues with r8169 by disabling rx interrupt coalescing on certain chips. From Heiner Kallweit. 12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo Abeni. 13) Fully initialize sockaddr_in structures in SCTP, from Xin Long. 14) Various BPF flow dissector fixes from Stanislav Fomichev. 15) Divide by zero in act_sample, from Davide Caratti. 16) Fix bridging multicast regression introduced by rhashtable conversion, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) ibmvnic: Fix completion structure initialization ipv6: sit: reset ip header pointer in ipip6_rcv net: bridge: always clear mcast matching struct on reports and leaves libcxgb: fix incorrect ppmax calculation vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x sch_cake: Make sure we can write the IP header before changing DSCP bits sch_cake: Use tc_skb_protocol() helper for getting packet protocol tcp: Ensure DCTCP reacts to losses net/sched: act_sample: fix divide by zero in the traffic path net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop net: hns: Fix sparse: some warnings in HNS drivers net: hns: Fix WARNING when remove HNS driver with SMMU enabled net: hns: fix ICMP6 neighbor solicitation messages discard problem net: hns: Fix probabilistic memory overwrite when HNS driver initialized net: hns: Use NAPI_POLL_WEIGHT for hns driver net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() flow_dissector: rst'ify documentation ipv6: Fix dangling pointer when ipv6 fragment net-gro: Fix GRO flush when receiving a GSO packet. flow_dissector: document BPF flow dissector environment ...
2019-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-12/+75
Daniel Borkmann says: ==================== pull-request: bpf 2019-04-04 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Batch of fixes to the existing BPF flow dissector API to support calling BPF programs from the eth_get_headlen context (support for latter is planned to be added in bpf-next), from Stanislav. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-04Merge branch 'pm-tools'Rafael J. Wysocki1-58/+219
* pm-tools: tools/power turbostat: update version number tools/power turbostat: Warn on bad ACPI LPIT data tools/power turbostat: Add checks for failure of fgets() and fscanf() tools/power turbostat: Also read package power on AMD F17h (Zen) tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL tools/power turbostat: Do not display an error on systems without a cpufreq driver tools/power turbostat: Add Die column tools/power turbostat: Add Icelake support tools/power turbostat: Cleanup CNL-specific code tools/power turbostat: Cleanup CC3-skip code tools/power turbostat: Restore ability to execute in topology-order
2019-04-04net/sched: act_sample: fix divide by zero in the traffic pathDavide Caratti1-0/+24
the control path of 'sample' action does not validate the value of 'rate' provided by the user, but then it uses it as divisor in the traffic path. Validate it in tcf_sample_init(), and return -EINVAL with a proper extack message in case that value is zero, to fix a splat with the script below: # tc f a dev test0 egress matchall action sample rate 0 group 1 index 2 # tc -s a s action sample total acts 1 action order 0: sample rate 1/0 group 1 pipe index 2 ref 1 bind 1 installed 19 sec used 19 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 # ping 192.0.2.1 -I test0 -c1 -q divide error: 0000 [#1] SMP PTI CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample] Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01 RSP: 0018:ffffae320190ba30 EFLAGS: 00010246 RAX: 00000000b0677d21 RBX: ffff8af1ed9ec000 RCX: 0000000059a9fe49 RDX: 0000000000000000 RSI: 000000000c7e33b7 RDI: ffff8af23daa0af0 RBP: ffff8af1ee11b200 R08: 0000000074fcaf7e R09: 0000000000000000 R10: 0000000000000050 R11: ffffffffb3088680 R12: ffff8af232307f80 R13: 0000000000000003 R14: ffff8af1ed9ec000 R15: 0000000000000000 FS: 00007fe9c6d2f740(0000) GS:ffff8af23da80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff6772f000 CR3: 00000000746a2004 CR4: 00000000001606e0 Call Trace: tcf_action_exec+0x7c/0x1c0 tcf_classify+0x57/0x160 __dev_queue_xmit+0x3dc/0xd10 ip_finish_output2+0x257/0x6d0 ip_output+0x75/0x280 ip_send_skb+0x15/0x40 raw_sendmsg+0xae3/0x1410 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] Kernel panic - not syncing: Fatal exception in interrupt Add a TDC selftest to document that 'rate' is now being validated. Reported-by: Matteo Croce <[email protected]> Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Signed-off-by: Davide Caratti <[email protected]> Acked-by: Yotam Gigi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-04samples, selftests/bpf: add NULL check for ksym_searchDaniel T. Lee1-2/+2
Since, ksym_search added with verification logic for symbols existence, it could return NULL when the kernel symbols are not loaded. This commit will add NULL check logic after ksym_search. Signed-off-by: Daniel T. Lee <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-04selftests/bpf: ksym_search won't check symbols existsDaniel T. Lee1-0/+4
Currently, ksym_search located at trace_helpers won't check symbols are existing or not. In ksym_search, when symbol is not found, it will return &syms[0](_stext). But when the kernel symbols are not loaded, it will return NULL, which is not a desired action. This commit will add verification logic whether symbols are loaded prior to the symbol search. Signed-off-by: Daniel T. Lee <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-04selftests/bpf: synthetic tests to push verifier limitsAlexei Starovoitov2-9/+35
Add a test to generate 1m ld_imm64 insns to stress the verifier. Bump the size of fill_ld_abs_vlan_push_pop test from 4k to 29k and jump_around_ld_abs from 4k to 5.5k. Larger sizes are not possible due to 16-bit offset encoding in jump instructions. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-04selftests/bpf: add few verifier scale testsAlexei Starovoitov7-1/+215
Add 3 basic tests that stress verifier scalability. test_verif_scale1.c calls non-inlined jhash() function 90 times on different position in the packet. This test simulates network packet parsing. jhash function is ~140 instructions and main program is ~1200 insns. test_verif_scale2.c force inlines jhash() function 90 times. This program is ~15k instructions long. test_verif_scale3.c calls non-inlined jhash() function 90 times on But this time jhash has to process 32-bytes from the packet instead of 14-bytes in tests 1 and 2. jhash function is ~230 insns and main program is ~1200 insns. $ test_progs -s can be used to see verifier stats. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-04libbpf: teach libbpf about log_level bit 2Alexei Starovoitov4-4/+17
Allow bpf_prog_load_xattr() to specify log_level for program loading. Teach libbpf to accept log_level with bit 2 set. Increase default BPF_LOG_BUF_SIZE from 256k to 16M. There is no downside to increase it to a maximum allowed by old kernels. Existing 256k limit caused ENOSPC errors and users were not able to see verifier error which is printed at the end of the verifier log. If ENOSPC is hit, double the verifier log and try again to capture the verifier error. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-03net/flow_dissector: pass flow_keys->n_proto to BPF programsStanislav Fomichev1-2/+4
This is a preparation for the next commit that would prohibit access to the most fields of __sk_buff from the BPF programs. Instead of requiring BPF flow dissector programs to look into skb, pass all input data in the flow_keys. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-03selftests/bpf: fix vlan handling in flow dissector programStanislav Fomichev2-11/+72
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use flow_keys->n_proto, that we set in parse_eth_proto instead and properly increment nhoff as well. Also, always use skb->protocol and don't look at skb->vlan_present. skb->vlan_present indicates that vlan information is stored out-of-band in skb->vlan_{tci,proto} and vlan header is already pulled from skb. That means, skb->vlan_present == true is not relevant for BPF flow dissector. Add simple test cases with VLAN tagged frames: * single vlan for ipv4 * double vlan for ipv6 Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-02selftests: bpf: remove duplicate .flags initialization in ctx_skb.cStanislav Fomichev1-1/+0
verifier/ctx_skb.c:708:11: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-02selftests: bpf: fix -Wformat-invalid-specifier for bpf_obj_id.cStanislav Fomichev1-4/+4
Use standard C99 %zu for sizeof, not GCC's custom %Zu: bpf_obj_id.c:76:48: warning: invalid conversion specifier 'Z' Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-02selftests: bpf: fix -Wformat-security warning for flow_dissector_load.cStanislav Fomichev1-1/+1
flow_dissector_load.c:55:19: warning: format string is not a string literal (potentially insecure) [-Wformat-security] error(1, errno, command); ^~~~~~~ flow_dissector_load.c:55:19: note: treat the string as an argument to avoid this error(1, errno, command); ^ "%s", 1 warning generated. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-02selftests: bpf: tests.h should depend on .c files, not the outputStanislav Fomichev1-2/+2
This makes sure we don't put headers as input files when doing compilation, because clang complains about the following: clang-9: error: cannot specify -o when generating multiple output files ../lib.mk:152: recipe for target 'xxx/tools/testing/selftests/bpf/test_verifier' failed make: *** [xxx/tools/testing/selftests/bpf/test_verifier] Error 1 make: *** Waiting for unfinished jobs.... clang-9: error: cannot specify -o when generating multiple output files ../lib.mk:152: recipe for target 'xxx/tools/testing/selftests/bpf/test_progs' failed Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-01bpf: add bpffs multi-dimensional array tests in test_btfYonghong Song1-8/+24
For multiple dimensional arrays like below, int a[2][3] both llvm and pahole generated one BTF_KIND_ARRAY type like . element_type: int . index_type: unsigned int . number of elements: 6 Such a collapsed BTF_KIND_ARRAY type will cause the divergence in BTF vs. the user code. In the compile-once-run-everywhere project, the header file is generated from BTF and used for bpf program, and the definition in the header file will be different from what user expects. But the kernel actually supports chained multi-dimensional array types properly. The above "int a[2][3]" can be represented as Type #n: . element_type: int . index_type: unsigned int . number of elements: 3 Type #(n+1): . element_type: type #n . index_type: unsigned int . number of elements: 2 The following llvm commit https://reviews.llvm.org/rL357215 also enables llvm to generated proper chained multi-dimensional arrays. The test_btf already has a raw test ("struct test #1") for chained multi-dimensional arrays. This patch added amended bpffs test for chained multi-dimensional arrays. Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-03-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-20/+54
Pull KVM fixes from Paolo Bonzini: "A collection of x86 and ARM bugfixes, and some improvements to documentation. On top of this, a cleanup of kvm_para.h headers, which were exported by some architectures even though they not support KVM at all. This is responsible for all the Kbuild changes in the diffstat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION KVM: doc: Document the life cycle of a VM and its resources KVM: selftests: complete IO before migrating guest state KVM: selftests: disable stack protector for all KVM tests KVM: selftests: explicitly disable PIE for tests KVM: selftests: assert on exit reason in CR4/cpuid sync test KVM: x86: update %rip after emulating IO x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts kvm: don't redefine flags as something else kvm: mmu: Used range based flushing in slot_handle_level_range KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region() kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation) KVM: Reject device ioctls from processes other than the VM's creator KVM: doc: Fix incorrect word ordering regarding supported use of APIs KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT ...
2019-03-31Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds26-103/+288
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "Core libraries: - Fix max perf_event_attr.precise_ip detection. - Fix parser error for uncore event alias - Fixup ordering of kernel maps after obtaining the main kernel map address. Intel PT: - Fix TSC slip where A TSC packet can slip past MTC packets so that the timestamp appears to go backwards. - Fixes for exported-sql-viewer GUI conversion to python3. ARM coresight: - Fix the build by adding a missing case value for enumeration value introduced in newer library, that now is the required one. tool headers: - Syncronize kernel headers with the kernel, getting new io_uring and pidfd_send_signal syscalls so that 'perf trace' can handle them" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu: Fix parser error for uncore event alias perf scripts python: exported-sql-viewer.py: Fix python3 support perf scripts python: exported-sql-viewer.py: Fix never-ending loop perf machine: Update kernel map address and re-order properly tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd tools headers uapi: Update drm/i915_drm.h tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h perf evsel: Fix max perf_event_attr.precise_ip detection perf intel-pt: Fix TSC slip perf cs-etm: Add missing case value
2019-03-31Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "A small set of core updates: - Make the watchdog respect the selected CPU mask again. That was broken by the rework of the watchdog thread management and caused inconsistent state and NMI watchdog being unstoppable. - Ensure that the objtool build can find the libelf location. - Remove dead kcore stub code" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Respect watchdog cpumask on CPU hotplug objtool: Query pkg-config for libelf location proc/kcore: Remove unused kclist_add_remap()
2019-03-30libnvdimm/security: provide fix for secure-erase to use zero-keyDave Jiang1-2/+9
Add a zero key in order to standardize hardware that want a key of 0's to be passed. Some platforms defaults to a zero-key with security enabled rather than allow the OS to enable the security. The zero key would allow us to manage those platform as well. This also adds a fix to secure erase so it can use the zero key to do crypto erase. Some other security commands already use zero keys. This introduces a standard zero-key to allow unification of semantics cross nvdimm security commands. Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2019-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-3/+92
Daniel Borkmann says: ==================== pull-request: bpf 2019-03-29 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Bug fix in BTF deduplication that was mishandling an equivalence comparison, from Andrii. 2) libbpf Makefile fixes to properly link against libelf for the shared object and to actually export AF_XDP's xsk.h header, from Björn. 3) Fix use after free in bpf inode eviction, from Daniel. 4) Fix a bug in skb creation out of cpumap redirect, from Jesper. 5) Remove an unnecessary and triggerable WARN_ONCE() in max number of call stack frames checking in verifier, from Paul. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-03-30Merge branch 'turbostat' of ↵Rafael J. Wysocki1-58/+219
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility updates for 5.1 from Len Brown: "Misc fixes and updates." * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: Warn on bad ACPI LPIT data tools/power turbostat: Add checks for failure of fgets() and fscanf() tools/power turbostat: Also read package power on AMD F17h (Zen) tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL tools/power turbostat: Do not display an error on systems without a cpufreq driver tools/power turbostat: Add Die column tools/power turbostat: Add Icelake support tools/power turbostat: Cleanup CNL-specific code tools/power turbostat: Cleanup CC3-skip code tools/power turbostat: Restore ability to execute in topology-order
2019-03-29selftests/bpf: Test variable offset stack accessAndrey Ignatov1-2/+77
Test different scenarios of indirect variable-offset stack access: out of bound access (>0), min_off below initialized part of the stack, max_off+size above initialized part of the stack, initialized stack. Example of output: ... #856/p indirect variable-offset stack access, out of bound OK #857/p indirect variable-offset stack access, max_off+size > max_initialized OK #858/p indirect variable-offset stack access, min_off < min_initialized OK #859/p indirect variable-offset stack access, ok OK ... Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-03-29selftests: tc-testing: Add pedit testsDmytro Linkin1-0/+903
Add 36 pedit action tests to check pedit options described in tc-pedit(8) man page. Test cases can be specified by categories: actions, pedit, raw_op, layered_op. RAW_OP cases check offset option for u8, u16 and u32 offset size. LAYERED_OP cases check fields option for eth, ip, ip6, tcp and udp headers. Include following tests: 377e - Add pedit action with RAW_OP offset u32 a0ca - Add pedit action with RAW_OP offset u32 (INVALID) dd8a - Add pedit action with RAW_OP offset u16 u16 53db - Add pedit action with RAW_OP offset u16 (INVALID) 5c7e - Add pedit action with RAW_OP offset u8 add value 2893 - Add pedit action with RAW_OP offset u8 quad 3a07 - Add pedit action with RAW_OP offset u8-u16-u8 ab0f - Add pedit action with RAW_OP offset u16-u8-u8 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID) f512 - Add pedit action with RAW_OP offset u16 at offmask shift set c2cb - Add pedit action with RAW_OP offset u32 retain value 86d4 - Add pedit action with LAYERED_OP eth set src & dst c715 - Add pedit action with LAYERED_OP eth set src (INVALID) ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence 5810 - Add pedit action with LAYERED_OP ip set src & dst 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID) 31ae - Add pedit action with LAYERED_OP ip ttl clear/set 486f - Add pedit action with LAYERED_OP ip set duplicate fields e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID) fc1f - Add pedit action with LAYERED_OP ip6 set src & dst 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID) 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit 1442 - Add pedit action with LAYERED_OP tcp set dport & sport b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID) cfcc - Add pedit action with LAYERED_OP tcp flags set 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields f1c8 - Add pedit action with LAYERED_OP udp set dport & sport d784 - Add pedit action with mixed RAW/LAYERED_OP #1 70ca - Add pedit action with mixed RAW/LAYERED_OP #2 Signed-off-by: Dmytro Linkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: mlxsw: Add a new test for strict priorityPetr Machata1-0/+311
Test that when strict priority is configured on a system, the higher-priority traffic does actually win all the available bandwidth. The test uses a similar approach to qos_mc_aware.sh to run and account the traffic. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: mlxsw: Add qos_lib.shPetr Machata2-92/+109
Extract reusable code from qos_mc_aware.sh and put into a new library. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: mlxsw: qos_mc_aware: Configure shared buffersPetr Machata1-0/+19
This test runs two streams of traffic from two independent ports to create congestion on one egress port. It is necessary to configure the shared buffer thresholds correctly, to make sure that there is traffic from both streams in the shared buffer. Only then can the test actually test prioritization among these streams. Without this configuration, it is possible, that one of the streams takes all of port-pool quota, and the other stream is not even admitted, thus invalidating the result. On Spectrum-1, this is not a problem, because MC traffic uses a separate pool. But for Spectrum-2, MC and UC share the same pool, and the correct configuration is important. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: forwarding: devlink_lib: Add shared buffer helpersPetr Machata1-0/+95
Add helpers to obtain, set, and restore a pool size, and a port-pool and tc-pool threshold. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: forwarding: devlink_lib: Simplify deduction of DEVLINK_DEVPetr Machata1-3/+2
Use devlink -j and jq for more accurate querying. Use cut -f-2 instead of rev-cut-rev combo. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: forwarding: devlink_lib: Avoid double sourcing of lib.shPetr Machata4-11/+8
Don't source lib.sh twice and make the script work with ifnames passed on the command line. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: forwarding: Test action VLAN modifyDanielle Ratson1-0/+164
Construct a basic topology consisting of two hosts connected using a VLAN-aware bridge. Put each port in a different VLAN and test that ping fails. Add ingress and egress filters with a VLAN modify action and test that ping passes. Signed-off-by: Danielle Ratson <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: forwarding: Add PCP match and VLAN match testsAmit Cohen1-1/+58
Send packets with VLAN and PCP set and check that TC flower filters can match on these keys. Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28selftests: forwarding: Add reverse path forwarding (RPF) test casesIdo Schimmel1-1/+106
In case a packet is routed using a multicast route whose specified ingress interface does not match the interface from which the packet was received, the packet is dropped. Add IPv4 and IPv6 test cases for above mentioned scenario. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28perf pmu: Fix parser error for uncore event aliasKan Liang1-0/+10
Perf fails to parse uncore event alias, for example: # perf stat -e unc_m_clockticks -a --no-merge sleep 1 event syntax error: 'unc_m_clockticks' \___ parser error Current code assumes that the event alias is from one specific PMU. To find the PMU, perf strcmps the PMU name of event alias with the real PMU name on the system. However, the uncore event alias may be from multiple PMUs with common prefix. The PMU name of uncore event alias is the common prefix. For example, UNC_M_CLOCKTICKS is clock event for iMC, which include 6 PMUs with the same prefix "uncore_imc" on a skylake server. The real PMU names on the system for iMC are uncore_imc_0 ... uncore_imc_5. The strncmp is used to only check the common prefix for uncore event alias. With the patch: # perf stat -e unc_m_clockticks -a --no-merge sleep 1 Performance counter stats for 'system wide': 723,594,722 unc_m_clockticks [uncore_imc_5] 724,001,954 unc_m_clockticks [uncore_imc_3] 724,042,655 unc_m_clockticks [uncore_imc_1] 724,161,001 unc_m_clockticks [uncore_imc_4] 724,293,713 unc_m_clockticks [uncore_imc_2] 724,340,901 unc_m_clockticks [uncore_imc_0] 1.002090060 seconds time elapsed Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Thomas Richter <[email protected]> Cc: [email protected] Fixes: ea1fa48c055f ("perf stat: Handle different PMU names with common prefix") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-28perf scripts python: exported-sql-viewer.py: Fix python3 supportAdrian Hunter1-4/+13
Unlike python2, python3 strings are not compatible with byte strings. That results in disassembly not working for the branches reports. Fixup those places overlooked in the port to python3. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: beda0e725e5f ("perf script python: Add Python3 support to exported-sql-viewer.py") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-28perf scripts python: exported-sql-viewer.py: Fix never-ending loopAdrian Hunter1-10/+50
pyside version 1 fails to handle python3 large integers in some cases, resulting in Qt getting into a never-ending loop. This affects: samples Table samples_view Table All branches Report Selected branches Report Add workarounds for those cases. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: beda0e725e5f ("perf script python: Add Python3 support to exported-sql-viewer.py") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-28perf machine: Update kernel map address and re-order properlyWei Li1-12/+20
Since commit 1fb87b8e9599 ("perf machine: Don't search for active kernel start in __machine__create_kernel_maps"), the __machine__create_kernel_maps() just create a map what start and end are both zero. Though the address will be updated later, the order of map in the rbtree may be incorrect. The commit ee05d21791db ("perf machine: Set main kernel end address properly") fixed the logic in machine__create_kernel_maps(), but it's still wrong in function machine__process_kernel_mmap_event(). To reproduce this issue, we need an environment which the module address is before the kernel text segment. I tested it on an aarch64 machine with kernel 4.19.25: [root@localhost hulk]# grep _stext /proc/kallsyms ffff000008081000 T _stext [root@localhost hulk]# grep _etext /proc/kallsyms ffff000009780000 R _etext [root@localhost hulk]# tail /proc/modules hisi_sas_v2_hw 77824 0 - Live 0xffff00000191d000 nvme_core 126976 7 nvme, Live 0xffff0000018b6000 mdio 20480 1 ixgbe, Live 0xffff0000018ab000 hisi_sas_main 106496 1 hisi_sas_v2_hw, Live 0xffff000001861000 hns_mdio 20480 2 - Live 0xffff000001822000 hnae 28672 3 hns_dsaf,hns_enet_drv, Live 0xffff000001815000 dm_mirror 40960 0 - Live 0xffff000001804000 dm_region_hash 32768 1 dm_mirror, Live 0xffff0000017f5000 dm_log 32768 2 dm_mirror,dm_region_hash, Live 0xffff0000017e7000 dm_mod 315392 17 dm_mirror,dm_log, Live 0xffff000001780000 [root@localhost hulk]# Before fix: [root@localhost bin]# perf record sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ] [root@localhost bin]# perf buildid-list -i perf.data 4c4e46c971ca935f781e603a09b52a92e8bdfee8 [vdso] [root@localhost bin]# perf buildid-list -i perf.data -H 0000000000000000000000000000000000000000 /proc/kcore [root@localhost bin]# After fix: [root@localhost tools]# ./perf/perf record sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ] [root@localhost tools]# ./perf/perf buildid-list -i perf.data 28a6c690262896dbd1b5e1011ed81623e6db0610 [kernel.kallsyms] 106c14ce6e4acea3453e484dc604d66666f08a2f [vdso] [root@localhost tools]# ./perf/perf buildid-list -i perf.data -H 28a6c690262896dbd1b5e1011ed81623e6db0610 /proc/kcore Signed-off-by: Wei Li <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Li Bin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.