| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4
part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b643a
("selftests/bpf: No need to drop the packet when there is no geneve opt"),
when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error,
there is no need to drop the packets and break all geneve rx traffic.
Just set opt_class to 0 and keep returning TC_ACT_OK at the end.
Fixes: 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt")
Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: William Tu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Since the kernel will rely on a single canonical set of NOPs, make sure
objtool uses the exact same ones.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
A raw PMU event (eventsel+umask) in the form of rNNN is supported
by perf but lacks of checking for the validity of raw encoding.
For example, bit 16 and bit 17 are not valid on KBL but perf doesn't
report warning when encoding with these bits.
Before:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
Performance counter stats for 'system wide':
0 cpu/r031234/
1.003798924 seconds time elapsed
It may silently measure the wrong event!
The kernel supported bits have been exported through
/sys/devices/<pmu>/format/. Perf collects the information to
'struct perf_pmu_format' and links it to 'pmu->format' list.
The 'struct perf_pmu_format' has a bitmap which records the
valid bits for this format. For example,
root@kbl-ppc:/sys/devices/cpu/format# cat umask
config:8-15
The valid bits (bit8-bit15) are recorded in bitmap of format 'umask'.
We collect total valid bits of all formats, save to a local variable
'masks' and reverse it. Now '~masks' represents total invalid bits.
bits = config & ~masks;
The set bits in 'bits' indicate the invalid bits used in config.
Finally we use bitmap_scnprintf to report the invalid bits.
Some architectures may not export supported bits through sysfs,
so if masks is 0, perf_pmu__warn_invalid_config directly returns.
After:
Single event without name:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
WARNING: event 'N/A' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 cpu/r031234/
1.001597373 seconds time elapsed
Multiple events with names:
# ./perf stat -e cpu/rf01234,name=aaa/,cpu/r031234,name=bbb/ -a -- sleep 1
WARNING: event 'aaa' not valid (bits 20,22 of config 'f01234' not supported by kernel)!
WARNING: event 'bbb' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 aaa
0 bbb
1.001573787 seconds time elapsed
Warnings are reported for invalid bits.
Co-developed-by: Jiri Olsa <[email protected]>
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the 0x8000001f leaf's fields.
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Feng Tang <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
To update kernel headers and check if some need syncing.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
... and move it above the only place it is used.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Now that it is not needed anymore, drop it.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Users of the instruction decoder should use this to decode instruction
bytes. For that, have insn*() helpers return an int value to denote
success/failure. When there's an error fetching the next insn byte and
the insn falls short, return -ENODATA to denote that.
While at it, make insn_get_opcode() more stricter as to whether what has
seen so far is a valid insn and if not.
Copy linux/kconfig.h for the tools-version of the decoder so that it can
use IS_ENABLED().
Also, cast the INSN_MODE_KERN dummy define value to (enum insn_mode)
for tools use of the decoder because perf tool builds with -Werror and
errors out with -Werror=sign-compare otherwise.
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Add an explicit __ignore_sync_check__ marker which will be used to mark
lines which are supposed to be ignored by file synchronization check
scripts, its advantage being that it explicitly denotes such lines in
the code.
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
It wasn't documented so add it. No functional changes.
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single objtool fix to handle the PUSHF/POPF validation correctly for
the paravirt changes which modified arch_local_irq_restore not to use
popf"
* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Fix uaccess PUSHF/POPF validation
|
|
The join self tests previously used the '-c' command line option to
enable creation of pcap files for the tests that run, but the change to
allow running a subset of the join tests made overlapping use of that
option.
Restore the capture functionality with '-c' and move the syncookie test
option to '-k'.
Fixes: 1002b89f23ea ("selftests: mptcp: add command line arguments for mptcp_join.sh")
Acked-and-tested-by: Geliang Tang <[email protected]>
Co-developed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
|
|
Commit ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not
use popf") replaced "push %reg; popf" with something like: "test
$0x200, %reg; jz 1f; sti; 1:", which breaks the pushf/popf symmetry
that commit ea24213d8088 ("objtool: Add UACCESS validation") relies
on.
The result is:
drivers/gpu/drm/amd/amdgpu/si.o: warning: objtool: si_common_hw_init()+0xf36: PUSHF stack exhausted
Meanwhile, commit c9c324dc22aa ("objtool: Support stack layout changes
in alternatives") makes that we can actually use stack-ops in
alternatives, which means we can revert 1ff865e343c2 ("x86,smap: Fix
smap_{save,restore}() alternatives").
That in turn means we can limit the PUSHF/POPF handling of
ea24213d8088 to those instructions that are in alternatives.
Fixes: ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not use popf")
Reported-by: Borislav Petkov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
kunit_tool maintains a list of config options which are broken under
UML, which we exclude from an otherwise 'make ARCH=um allyesconfig'
build used to run all tests with the --alltests option.
Something in UML allyesconfig is causing segfaults when page poisining
is enabled (and is poisoning with a non-zero value). Previously, this
didn't occur, as allyesconfig enabled the CONFIG_PAGE_POISONING_ZERO
option, which worked around the problem by zeroing memory. This option
has since been removed, and memory is now poisoned with 0xAA, which
triggers segfaults in many different codepaths, preventing UML from
booting.
Note that we have to disable both CONFIG_PAGE_POISONING and
CONFIG_DEBUG_PAGEALLOC, as the latter will 'select' the former on
architectures (such as UML) which don't implement __kernel_map_pages().
Ideally, we'd fix this properly by tracking down the real root cause,
but since this is breaking KUnit's --alltests feature, it's worth
disabling there in the meantime so the kernel can boot to the point
where tests can actually run.
Fixes: f289041ed4cf ("mm, page_poison: remove CONFIG_PAGE_POISONING_ZERO")
Signed-off-by: David Gow <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The first argument to namedtuple() should match the name of the type,
which wasn't the case for KconfigEntryBase.
Fixing this is enough to make mypy show no python typing errors again.
Fixes 97752c39bd ("kunit: kunit_tool: Allow .kunitconfig to disable config items")
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Daniel Latypov <[email protected]>
Acked-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This change makes use of the new IIO buffer API to read data from an IIO
buffer.
It doesn't read the /sys/bus/iio/devices/iio:deviceX/scan_elements dir
anymore, it reads /sys/bus/iio/devices/iio:deviceX/bufferY, where all the
scan_elements have been merged together with the old/classical buffer
attributes.
And it makes use of the new IIO_BUFFER_GET_FD_IOCTL ioctl to get an FD for
the IIO buffer for which to read data from.
It also does a quick sanity check to see that -EBUSY is returned if reading
the chardev after the ioctl() has succeeded.
This was tested with the following cases:
1. Tested buffer0 works with ioctl()
2. Tested that buffer0 can't be opened via /dev/iio:deviceX after ioctl()
This check should be omitted under normal operation; it's being done
here to check that the driver change is sane
3. Moved valid buffer0 to be buffer1, and tested that data comes from it
Signed-off-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Mostly a tidy-up.
But also helps to understand the limits of scope of these functions and
globals.
Signed-off-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This is a bit of a tidy-up, but also helps with extending the
iioutils_get_type() function a bit, as we don't need to use it outside of
the iio_utils.c file. So, we'll need to update it only in one place.
With this change, the 'unsigned' types are updated to 'unsigned int' in the
iioutils_get_type() function definition.
Signed-off-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Having the definition of static_call() in static_call_types.h makes
no sense as long struct static_call_key isn't defined there, as the
generic implementation of static_call() is referencing this structure.
So move the definition of struct static_call_key to static_call_types.h.
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-10
The following pull-request contains BPF updates for your *net* tree.
We've added 8 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 136 insertions(+), 17 deletions(-).
The main changes are:
1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov.
2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting
percpu cgroup storage from tracing programs when nested, from Yonghong Song.
3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski.
4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp
L3 input length, from Jesper Dangaard Brouer.
5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos.
6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
PERF_RECORD_MMAP* records
Account for alignment bytes in the zero-ing memset.
Fixes: 1a853e36871b533c ("perf record: Allow specifying a pid to record")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
30b5c851af7991ad ("KVM: x86/xen: Add support for vCPU runstate information")
That don't cause any change in tooling as it doesn't introduce any new
ioctl, just parameters to existing one.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf build fails on 5.12.0rc2 on s390 with this error message:
util/synthetic-events.c: In function
‘__event__synthesize_thread.part.0.isra’:
util/synthetic-events.c:787:19: error: ‘kernel_thread’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
787 | if (_pid == pid && !kernel_thread) {
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
The build succeeds using command 'make DEBUG=y'.
The variable kernel_thread is set by this function sequence:
__event__synthesize_thread()
| defines bool kernel_thread; as local variable and calls
+--> perf_event__prepare_comm(..., &kernel_thread)
+--> perf_event__get_comm_ids(..., bool *kernel);
On return of this function variable kernel is always
set to true or false.
To prevent this compile error, assign variable kernel_thread
a value when it is defined.
Output after:
[root@m35lp76 perf]# make util/synthetic-events.o
....
CC util/synthetic-events.o
[root@m35lp76 perf]#
Fixes: c1b907953b2cd9ff ("perf tools: Skip PERF_RECORD_MMAP event synthesis for kernel threads")
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The only requirement of an auxtrace queue is that the buffers are in
time order. That is achieved by making separate queues for separate
perf buffer or AUX area buffer mmaps.
That generally means a separate queue per cpu for per-cpu contexts, and
a separate queue per thread for per-task contexts.
When buffers are added to a queue, perf checks that the buffer cpu and
thread id (tid) match the queue cpu and thread id.
However, generally, that need not be true, and perf will queue buffers
correctly anyway, so the check is not needed.
In addition, the check gets erroneously hit when using sample mode to
trace multiple threads.
Consequently, fix that case by removing the check.
Fixes: e502789302a6 ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We track if sve-ptrace encountered a failure in a variable but don't
actually use that value when we exit the program, do so.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A bunch of fixes for the GPIO subsystem. We have two regressions in
the core code spotted right after the merge window, a series of fixes
for ACPI GPIO and a subsequent fix for a related regression in
gpio-pca953x + a minor tweak in .gitignore and a rework of handling of
the gpio-line-names to remedy a regression in stm32mp151.
Summary:
- fix two regressions in core GPIO subsystem code: one NULL-pointer
dereference and one list corruption
- read GPIO line names from fwnode instead of using the generic
device properties to fix a regression on stm32mp151
- fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ
handling on Intel Galileo
- update .gitignore in GPIO selftests"
* tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Read "gpio-line-names" from a firmware node
gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2
gpiolib: acpi: Allow to find GpioInt() resource by name and index
gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk
gpiolib: acpi: Add missing IRQF_ONESHOT
gpio: fix gpio-device list corruption
gpio: fix NULL-deref-on-deregistration regression
selftests: gpio: update .gitignore
|
|
atomic_ops.rst was removed by commit f0400a77ebdc ("atomic: Delete
obsolete documentation").
Remove the broken link in tools/memory-model/Documentation/simple.txt.
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Akira Yokosawa <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Changeset b00aedf978aa ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
renamed: Documentation/RCU/rcu_dereference.txt
to: Documentation/RCU/rcu_dereference.rst.
Update its cross-reference accordingly.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Remote rcutorture testing requires that jitter.sh continue to be
invoked from the generated script for local runs, but that it instead
be invoked on the remote system for distributed runs. This argues
for common jitterstart and jitterstop scripts. But it would be good
for jitterstart and jitterstop to control the name and location of the
"jittering" file, while continuing to have the duration controlled by
the caller of these new scripts.
This commit therefore reverses the order of the jittering and duration
parameters for jitter.sh, so that the jittering parameter precedes the
duration parameter.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Now that there is a reliable way to convince the jitter.sh scripts to
stop, the jitter_pids file is not needed, nor is the code that kills all
the PIDs contained in this file. This commit therefore eliminates this
file and the code using it.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, jitter.sh execution is controlled by a time limit and by the
"kill" command. The former allowed jitter.sh to run uselessly past
the end of a set of runs that panicked during boot, and the latter is
vulnerable to PID reuse. This commit therefore introduces a "jittering"
file in the date-stamp directory within "res" that must be present for
the jitter.sh scripts to continue executing. The time limit is still
in place in order to avoid disturbing runs featuring large trace dumps,
but the removal of the "jittering" file handles the panic-during-boot
scenario without relying on PIDs.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, the script generated by kvm.sh does a "wait" to wait on both
the current batch's guest OSes and any jitter.sh scripts. This works,
but makes it hard to abstract the jittering so that common code can be
used for both local and distributed runs. This commit therefore uses
"build.run" files in scenario directories, and these files are removed
after the corresponding scenario's guest OS has completed.
Note that --build-only runs do not create build.run files because they
also do not create guest OSes and do not run any jitter.sh scripts.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently the bN.ready and bN.wait files are placed in the
rcutorture directory, which really is not at all a good place
for run-specific files. This commit therefore renames these
files to build.ready and build.wait and then moves them into the
scenario directories within the "res" directory, for example, into
tools/testing/selftests/rcutorture/res/2021.02.10-15.08.23/TINY01.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Given large numbers of threads, the quantity of torture-test output is
sufficient to sometimes result in RCU CPU stall warnings. The probability
of these stall warnings was greatly reduced by batching the output,
but the warnings were not eliminated. However, the actual test only
depends on console output that is printed even when refscale.verbose=0.
This commit therefore causes this test to run with refscale.verbose=0.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Given large numbers of threads, the quantity of torture-test output is
sufficient to sometimes result in RCU CPU stall warnings. The probability
of these stall warnings was greatly reduced by batching the output,
but the warnings were not eliminated. However, the actual test only
depends on console output that is printed even when rcuscale.verbose=0.
This commit therefore causes this test to run with rcuscale.verbose=0.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The testid.txt file was intended for occasional in extremis use, but
now that the new "bare-metal" file references it, it might see more use.
This commit therefore labels sections of output and adds spacing to make
it easier to see what needs to be done to make a bare-metal build tree
match an rcutorture build tree.
Of course, you can avoid this whole issue by building your bare-metal
kernel in the same directory in which you ran rcutorture, but that might
not always be an option.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
In some environments, the torture-testing use of virtualization is
inconvenient. In such cases, the modprobe and rmmod commands may be used
to do torture testing, but significant setup is required to build, boot,
and modprobe a kernel so as to match a given torture-test scenario.
This commit therefore creates a "bare-metal" file in each results
directory containing steps to run the corresponding scenario using the
modprobe command on bare metal. For example, the contents of this file
after using kvm.sh to build an rcutorture TREE01 kernel, perhaps with
the --buildonly argument, is as follows:
To run this scenario on bare metal:
1. Set your bare-metal build tree to the state shown in this file:
/home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2021.02.04-17.10.19/testid.txt
2. Update your bare-metal build tree's .config based on this file:
/home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2021.02.04-17.10.19/TREE01/ConfigFragment
3. Make the bare-metal kernel's build system aware of your .config updates:
$ yes "" | make oldconfig
4. Build your bare-metal kernel.
5. Boot your bare-metal kernel with the following parameters:
maxcpus=8 nr_cpus=43 rcutree.gp_preinit_delay=3 rcutree.gp_init_delay=3 rcutree.gp_cleanup_delay=3 rcu_nocbs=0-1,3-7
6. Start the test with the following command:
$ modprobe rcutorture nocbs_nthreads=8 nocbs_toggle=1000 fwd_progress=0 onoff_interval=1000 onoff_holdoff=30 n_barrier_cbs=4 stat_interval=15 shutdown_secs=120 test_no_idle_hz=1 verbose=1
7. After some time, end the test with the following command:
$ rmmod rcutorture
8. Copy your bare-metal kernel's .config file, overwriting this file:
/home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2021.02.04-17.10.19/TREE01/.config
9. Copy the console output from just before the modprobe to just after
the rmmod into this file:
/home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2021.02.04-17.10.19/TREE01/console.log
10. Check for runtime errors using the following command:
$ tools/testing/selftests/rcutorture/bin/kvm-recheck.sh /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2021.02.04-17.10.19
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Yes, I do recall a time when 512MB of memory was a lot of mass storage,
much less main memory, but the rcuscale kvfree_rcu() testing invoked by
torture.sh can sometimes exceed it on large systems, resulting in OOM.
This commit therefore causes torture.sh to pase the "--memory 1G"
argument to kvm.sh to reserve a full gigabyte for this purpose.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
If the build fails when running multiple instances of a given rcutorture
scenario, for example, using the kvm.sh --configs "8*RUDE01" argument,
the build will be rerun an additional seven times. This is in some sense
correct, but it can waste significant time. This commit therefore checks
for a prior failed build and simply copies over that build's output.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The current jitter.sh script expects cpumask bits to fit into whatever
the awk interpreter uses for an integer, which clearly does not hold for
even medium-sized systems these days. This means that on a large system,
only the first 32 or 64 CPUs (depending) are subjected to jitter.sh
CPU-time perturbations. This commit therefore computes a given CPU's
cpumask using text manipulation rather than arithmetic shifts.
Reported-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
TREE03 tests RCU priority boosting, which is a real-time feature.
It would also be good if it tested something closer to what is
actually used by the real-time folks. This commit therefore adds
tree.use_softirq=0 to the TREE03 kernel boot parameters in TREE03.boot.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit uses the shiny new "all" and "N" cpumask options to decouple
the "nohz_full" and "rcu_nocbs" kernel boot parameters in the TREE04.boot
and TREE08.boot files from the CONFIG_NR_CPUS options in the TREE04 and
TREE08 files.
Reported-by: Paul Gortmaker <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Add tests that use mtu_len as input parameter in BPF-helper
bpf_check_mtu().
The BPF-helper is avail from both XDP and TC context. Add two tests
per context, one that tests below MTU and one that exceeds the MTU.
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/161521556358.3515614.5915221479709358964.stgit@firesoul
|
|
It was reported ([0]) that having optional -m flag between source and
destination arguments in install command breaks bpftools cross-build
on MacOS. Move -m to the front to fix this issue.
[0] https://github.com/openwrt/openwrt/pull/3959
Fixes: 7110d80d53f4 ("libbpf: Makefile set specified permission mode")
Signed-off-by: Georgi Valkov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
End users frequently want to know what features their processor
supports, independent of what the kernel supports.
/proc/cpuinfo is great. It is omnipresent and since it is provided by
the kernel it is always as up to date as the kernel. But, it could be
ambiguous about processor features which can be disabled by the kernel
at boot-time or compile-time.
There are some user space tools showing more raw features, but they are
not bound with kernel, and go with distros. Many end users are still
using old distros with new kernels (upgraded by themselves), and may
not upgrade the distros only to get a newer tool.
So here arise the need for a new tool, which
* shows raw CPU features read from the CPUID instruction
* will be easier to update compared to existing userspace
tooling (perhaps distributed like perf)
* inherits "modern" kernel development process, in contrast to some
of the existing userspace CPUID tools which are still being developed
without git and distributed in tarballs from non-https sites.
* Can produce output consistent with /proc/cpuinfo to make comparison
easier.
The CPUID leaf definitions are kept in an .csv file which allows for
updating only that file to add support for new feature leafs.
This is based on prototype code from Borislav Petkov
(http://sr71.net/~dave/intel/stupid-cpuid.c).
[ bp:
- Massage, add #define _GNU_SOURCE to fix implicit declaration of
function ‘strcasestr' warning
- remove superfluous newlines
- fallback to cpuid.csv in the current dir if none found
- fix typos
- move comments over the lines instead of sideways. ]
Originally-from: Borislav Petkov <[email protected]>
Suggested-by: Dave Hansen <[email protected]>
Suggested-by: Borislav Petkov <[email protected]>
Signed-off-by: Feng Tang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The executable that we build for GPIO selftests was renamed to
gpio-mockup-cdev. Let's update .gitignore so that we don't show it
as an untracked file.
Fixes: 8bc395a6a2e2 ("selftests: gpio: rework and simplify test implementation")
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Kent Gibson <[email protected]>
|