aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-04-11torture: Use "-o Batchmode=yes" to disable ssh password requestsPaul E. McKenney1-6/+6
The torture.sh script normally runs unattended, so there is not much point in the "ssh" command asking for a password. This commit therefore adds the "-o Batchmode=yes" argument to each "ssh" command to cause it to fail rather than ask for a password. Signed-off-by: Paul E. McKenney <[email protected]>
2022-04-11torture: Reposition so that $? collects ssh code in torture.shPaul E. McKenney1-1/+1
An "echo" slipped in between an "ssh" and the "ret=$?" that was intended to collect its exit code, which prevents torture.sh from detecting "ssh" failure. This commit therefore reassociates the two. Signed-off-by: Paul E. McKenney <[email protected]>
2022-04-11torture: Add rcu_normal and rcu_expedited runs to torture.shPaul E. McKenney1-0/+18
Currently, the rcupdate.rcu_normal and rcupdate.rcu_expedited kernel boot parameters are not regularly tested. The potential addition of polled expedited grace-period APIs increases the amount of code that is affected by these kernel boot parameters. This commit therefore adds a "--do-rt" argument to torture.sh to exercise these kernel-boot options. Signed-off-by: Paul E. McKenney <[email protected]>
2022-04-11libbpf: Usdt aarch64 arg parsing supportAlan Maguire1-0/+76
Parsing of USDT arguments is architecture-specific. On aarch64 it is relatively easy since registers used are x[0-31] and sp. Format is slightly different compared to x86_64. Possible forms are: - "size@[reg[,offset]]" for dereferences, e.g. "-8@[sp,76]" and "-4@[sp]"; - "size@reg" for register values, e.g. "-4@x0"; - "size@value" for raw values, e.g. "-8@1". Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-11perf test: Shell - Limit to only run executable scripts in testsCarsten Haitzler3-2/+17
'perf test''s shell runner will just run everything in the tests directory (as long as it's not another directory or does not begin with a dot), but sometimes you find files in there that are not shell scripts - perf.data output for example if you do some testing and then the next time you run perf test it tries to run these. Check the files are executable so they are actually intended to be test scripts and not just some "random junk" files there. Signed-off-by: Carsten Haitzler <[email protected]> Reviewed-by: Leo Yan <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-11perf scripting python: Expose symbol offset and source informationEelco Chaudron1-13/+36
This change adds the symbol offset to the data exported for each call-chain entry. This can not be calculated from the script and only the ip value, and no related mmap information. In addition, also export the source file and line information, if available, to avoid an external lookup if this information is needed. Signed-off-by: Eelco Chaudron <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/164554263724.752731.14651017093796049736.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-11perf jitdump: Add riscv64 supportEric Lin2-0/+4
This patch enables perf jitdump for riscv64 and was tested with V8 on qemu rv64. Qemu rv64: $ perf record -e cpu-clock -c 1000 -g -k mono ./d8_rv64 --perf-prof --no-write-protect-code-memory test.js $ perf inject -j -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Output: To display the perf.data header info, please use --header/--header-only options. Total Lost Samples: 0 Samples: 87K of event 'cpu-clock' Event count (approx.): 87974000 Children Self Command Shared Object Symbol .... 0.28% 0.06% d8_rv64 d8_rv64 [.] _ZN2v88internal6WasmJs7InstallEPNS0_7IsolateEb 0.28% 0.00% d8_rv64 d8_rv64 [.] _ZN2v88internal10ParserBaseINS0_6ParserEE22ParseLogicalExpressionEv 0.28% 0.03% d8_rv64 jitted-112-76.so [.] Builtin:InterpreterEntryTrampoline 0.12% 0.00% d8_rv64 d8_rv64 [.] _ZN2v88internal19ContextDeserializer11DeserializeEPNS0_7IsolateENS0_6HandleINS0_13JSGlobalProxyEEENS_33DeserializeInternalFieldsCallbackE 0.12% 0.01% d8_rv64 jitted-112-651.so [.] Builtin:CEntry_Return1_DontSaveFPRegs_ArgvOnStack_NoBuiltinExit .... Signed-off-by: Eric Lin <[email protected]> Cc: Albert Ou <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ilya Leoshkevich <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-11selftests: kvm: add tsc_scaling_sync to .gitignoreLike Xu1-0/+1
The tsc_scaling_sync's binary should be present in the .gitignore file for the git to ignore it. Signed-off-by: Like Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-11selftests/bpf: Drop duplicate max/min definitionsGeliang Tang5-11/+5
Drop duplicate macros min() and MAX() definitions in prog_tests and use MIN() or MAX() in sys/param.h instead. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/1ae276da9925c2de59b5bdc93b693b4c243e692e.1649462033.git.geliang.tang@suse.com
2022-04-11selftests/mptcp: add diag listen testsFlorian Westphal1-0/+38
Check dumping of mptcp listener sockets: 1. filter by dport should not return any results 2. filter by sport should return listen sk 3. filter by saddr+sport should return listen sk 4. no filter should return listen sk Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller1-0/+50
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Replace unnecessary list_for_each_entry_continue() in nf_tables, from Jakob Koschel. 2) Add struct nf_conntrack_net_ecache to conntrack event cache and use it, from Florian Westphal. 3) Refactor ctnetlink_dump_list(), also from Florian. 4) Bump module reference counter on cttimeout object addition/removal, from Florian. 5) Consolidate nf_log MAC printer, from Phil Sutter. 6) Add basic logging support for unknown ethertype, from Phil Sutter. 7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil. 8) Replace hardcode value in nft_bitwise, from Jeremy Sowden. 9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names, also from Jeremy. 10) nft_fib support for reverse path filtering with policy-based routing on iif. Extend selftests to cover for this new usecase, from Florian. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-11selftests: netfilter: add fib expression forward test caseFlorian Westphal1-0/+50
Its now possible to use fib expression in the forward chain (where both the input and output interfaces are known). Add a simple test case for this. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-11x86/tsx: Disable TSX development mode at bootPawan Gupta1-2/+2
A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <[email protected]> Suggested-by: Borislav Petkov <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Neelima Krishnan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-10tools/runqslower: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao1-16/+2
Explicitly set libbpf 1.0 API mode, then we can avoid using the deprecated RLIMIT_MEMLOCK. Signed-off-by: Yafang Shao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-10bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao8-23/+3
We have switched to memcg-based memory accouting and thus the rlimit is not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in libbpf for backward compatibility, so we can use it instead now. libbpf_set_strict_mode always return 0, so we don't need to check whether the return value is 0 or not. Signed-off-by: Yafang Shao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-10selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao21-61/+45
We have switched to memcg-based memory accouting and thus the rlimit is not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in libbpf for backward compatibility, so we can use it instead now. After this change, the header tools/testing/selftests/bpf/bpf_rlimit.h can be removed. This patch also removes the useless header sys/resource.h from many files in tools/testing/selftests/bpf/. Signed-off-by: Yafang Shao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-10libbpf: Fix a bug with checking bpf_probe_read_kernel() support in old kernelsRunqing Yang1-1/+1
Background: Libbpf automatically replaces calls to BPF bpf_probe_read_{kernel,user} [_str]() helpers with bpf_probe_read[_str](), if libbpf detects that kernel doesn't support new APIs. Specifically, libbpf invokes the probe_kern_probe_read_kernel function to load a small eBPF program into the kernel in which bpf_probe_read_kernel API is invoked and lets the kernel checks whether the new API is valid. If the loading fails, libbpf considers the new API invalid and replaces it with the old API. static int probe_kern_probe_read_kernel(void) { struct bpf_insn insns[] = { BPF_MOV64_REG(BPF_REG_1, BPF_REG_10), /* r1 = r10 (fp) */ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8), /* r1 += -8 */ BPF_MOV64_IMM(BPF_REG_2, 8), /* r2 = 8 */ BPF_MOV64_IMM(BPF_REG_3, 0), /* r3 = 0 */ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_probe_read_kernel), BPF_EXIT_INSN(), }; int fd, insn_cnt = ARRAY_SIZE(insns); fd = bpf_prog_load(BPF_PROG_TYPE_KPROBE, NULL, "GPL", insns, insn_cnt, NULL); return probe_fd(fd); } Bug: On older kernel versions [0], the kernel checks whether the version number provided in the bpf syscall, matches the LINUX_VERSION_CODE. If not matched, the bpf syscall fails. eBPF However, the probe_kern_probe_read_kernel code does not set the kernel version number provided to the bpf syscall, which causes the loading process alwasys fails for old versions. It means that libbpf will replace the new API with the old one even the kernel supports the new one. Solution: After a discussion in [1], the solution is using BPF_PROG_TYPE_TRACEPOINT program type instead of BPF_PROG_TYPE_KPROBE because kernel does not enfoce version check for tracepoint programs. I test the patch in old kernels (4.18 and 4.19) and it works well. [0] https://elixir.bootlin.com/linux/v4.19/source/kernel/bpf/syscall.c#L1360 [1] Closes: https://github.com/libbpf/libbpf/issues/473 Signed-off-by: Runqing Yang <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-10selftests/bpf: Improve by-name subtest selection logic in prog_testsMykola Lysenko5-88/+288
Improve subtest selection logic when using -t/-a/-d parameters. In particular, more than one subtest can be specified or a combination of tests / subtests. -a send_signal -d send_signal/send_signal_nmi* - runs send_signal test without nmi tests -a send_signal/send_signal_nmi*,find_vma - runs two send_signal subtests and find_vma test -a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* - runs 2 send_signal test and find_vma test. Disables two send_signal nmi subtests -t send_signal -t find_vma - runs two *send_signal* tests and one *find_vma* test This will allow us to have granular control over which subtests to disable in the CI system instead of disabling whole tests. Also, add new selftest to avoid possible regression when changing prog_test test name selection logic. Signed-off-by: Mykola Lysenko <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-10libbpf: Add ARC support to bpf_tracing.hVladimir Isaev2-0/+25
Add PT_REGS macros suitable for ARCompact and ARCv2. Signed-off-by: Vladimir Isaev <[email protected]> Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds1-5/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-09Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds26-71/+234
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-09Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers1-0/+1
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Truong <[email protected]> Cc: Dave Marchevsky <[email protected]> Cc: Denis Nikitin <[email protected]> Cc: German Gomez <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Lexi Shao <[email protected]> Cc: Li Huafei <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Remi Bernon <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Will Deacon <[email protected]> Cc: William Cohen <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan1-0/+4
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan1-1/+1
Signed-off-by: Michael Petlan <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin1-3/+12
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <[email protected]> Signed-off-by: Denis Nikitin <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf bench: Fix epoll bench to correct usage of affinity for machines with ↵Athira Rajeev2-12/+38
#CPUs > 1K The 'perf bench epoll' testcase fails on systems with more than 1K CPUs. Testcase: perf bench epoll all Result snippet: <<>> Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory <<>> In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads from respective bench_epoll_* function. Though the logs shows direct failure from pthread_create, the actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <[email protected]> Signed-off-by: Athira Jajeev <[email protected]> Tested-by: Disha Goel <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf bench: Fix futex bench to correct usage of affinity for machines with ↵Athira Rajeev5-28/+83
#CPUs > 1K The 'perf bench futex' testcase fails on systems with more than 1K CPUs. Testcase: perf bench futex all Failure snippet: <<>>Running futex/hash benchmark... perf: pthread_create: No such file or directory <<>> All the futex benchmarks (ie hash, lock-api, requeue, wake, wake-parallel), pthread_create is invoked in respective bench_futex_* function. Though the logs shows direct failure from pthread_create, strace logs showed that actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Signed-off-by: Athira Jajeev <[email protected]> Tested-by: Disha Goel <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf tools: Fix perf's libperf_print callbackAdrian Hunter1-1/+1
eprintf() does not expect va_list as the type of the 4th parameter. Use veprintf() because it does. Signed-off-by: Adrian Hunter <[email protected]> Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()") Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf: arm-spe: Fix perf report --mem-modeJames Clark1-0/+6
Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't allow opening the file unless one of the events has PERF_SAMPLE_DATA_SRC set. SPE doesn't have this set even though synthetic memory data is generated after it is decoded. Fix this issue by setting DATA_SRC on SPE events. This has no effect on the data collected because the SPE driver doesn't do anything with that flag and doesn't generate samples. Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") Signed-off-by: James Clark <[email protected]> Tested-by: Leo Yan <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: German Gomez <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: [email protected] Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf unwind: Don't show unwind error messages when augmenting frame pointer ↵James Clark8-14/+32
stack Commit Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") intended to add a 'best effort' DWARF unwind that improved the frame pointer stack in most scenarios. It's expected that the unwind will fail sometimes, but this shouldn't be reported as an error. It only works when the return address can be determined from the contents of the link register alone. Fix the error shown when the unwinder requires extra registers by adding a new flag that suppresses error messages. This flag is not set in the normal --call-graph=dwarf unwind mode so that behavior is not changed. Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") Reported-by: John Garry <[email protected]> Signed-off-by: James Clark <[email protected]> Tested-by: John Garry <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Truong <[email protected]> Cc: German Gomez <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To get the changes in: 83bea32ac7ed37bb ("arm64: Add part number for Arm Cortex-A78AE") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <[email protected]> Cc: Andrew Kilroy <[email protected]> Cc: Chanho Park <[email protected]> Cc: German Gomez <[email protected]> Cc: James Clark <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf test tsc: Fix error message when not supportedChengdong Li1-9/+27
By default `perf test tsc` does not return the error message when the child process detected kernel does not support it. Instead, the child process prints an error message to stderr, unfortunately stderr is redirected to /dev/null when verbose <= 0. This patch does: - return TEST_SKIP to the parent process instead of TEST_OK when perf_read_tsc_conversion() is not supported. - Add a new subtest of testing if TSC is supported on current architecture by moving exist code to a separate function. It avoids two places in test__perf_time_to_tsc() that return TEST_SKIP by doing this. - Extend the test suite definition to contain above two subtests. Current test_suite and test_case structs do not support printing skip reason when the number of subtest less than 1. To print skip reason, it is necessary to extend current test suite definition. Reviewed-by: Adrian Hunter <[email protected]> Signed-off-by: Chengdong Li <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf build: Don't use -ffat-lto-objects in the python feature test when ↵Arnaldo Carvalho de Melo2-0/+5
building with clang-13 Using -ffat-lto-objects in the python feature test when building with clang-13 results in: clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument] error: command '/usr/sbin/clang' failed with exit code 1 cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1 Noticed when building on a docker.io/library/archlinux:base container. Cc: Adrian Hunter <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Leo Yan <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Sedat Dilek <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf python: Fix probing for some clang command line optionsArnaldo Carvalho de Melo1-2/+4
The clang compiler complains about some options even without a source file being available, while others require one, so use the simple tools/build/feature/test-hello.c file. Then check for the "is not supported" string in its output, in addition to the "unknown argument" already being looked for. This was noticed when building with clang-13 where -ffat-lto-objects isn't supported and since we were looking just for "unknown argument" and not providing a source code to clang, was mistakenly assumed as being available and not being filtered to set of command line options provided to clang, leading to a build failure. Cc: Adrian Hunter <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Leo Yan <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Sedat Dilek <[email protected]> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09tools build: Filter out options and warnings not supported by clangArnaldo Carvalho de Melo2-0/+10
These make the feature check fail when using clang, so remove them just like is done in tools/perf/Makefile.config to build perf itself. Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config when building with clang is also necessary to avoid these warnings turned into errors (-Werror): CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o In file included from util/scripting-engines/trace-event-perl.c:35: In file included from /usr/lib64/perl5/CORE/perl.h:4085: In file included from /usr/lib64/perl5/CORE/hv.h:659: In file included from /usr/lib64/perl5/CORE/hv_func.h:34: In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4: /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^~~~~~~~~~ /usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START' # define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' v ^= (v>>23); \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' } STMT_END ^~~~~~~~ /usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END' # define STMT_END ) ^ Please refer to the discussion on the Link: tag below, where Nathan clarifies the situation: <quote> acme> And then get to the problems at the end of this message, which seem acme> similar to the problem described here: acme> acme> From Nathan Chancellor <> acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO acme> acme> https://lkml.org/lkml/2020/9/1/135 acme> acme> So perhaps in this case its better to disable that acme> -Werror,-Wcompound-token-split-by-macro when building with clang? Yes, I think that is probably the best solution. As far as I can tell, at least in this file and context, the warning appears harmless, as the "create a GNU C statement expression from two different macros" is very much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS. The warning is fixed in upstream Perl by just avoiding creating GNU C statement expressions using STMT_START and STMT_END: https://github.com/Perl/perl5/issues/18780 https://github.com/Perl/perl5/pull/18984 If I am reading the source code correctly, an alternative to disabling the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it seems like that might end up impacting more than just this site, according to the issue discussion above. </quote> Based-on-a-patch-by: Sedat Dilek <[email protected]> Tested-by: Sedat Dilek <[email protected]> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Leo Yan <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09tools build: Use $(shell ) instead of `` to get embedded libperl's ccoptsArnaldo Carvalho de Melo1-1/+1
Just like its done for ldopts and for both in tools/perf/Makefile.config. Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using: $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS)) And we need to do it to allow for building with versions of clang where some gcc options selected by distros are not available. Tested-by: Sedat Dilek <[email protected]> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Leo Yan <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+7
To get the changes in: b04d910af330b55e ("vdpa: support exposing the count of vqs to userspace") a61280ddddaa45f9 ("vdpa: support exposing the config size to userspace") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2021-07-15 16:17:01.840818309 -0300 +++ include/uapi/linux/vhost.h 2022-04-02 18:55:05.702522387 -0300 @@ -150,4 +150,11 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) + +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + #endif $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2022-04-04 14:52:25.036375145 -0300 +++ after 2022-04-04 14:52:31.906549976 -0300 @@ -38,4 +38,6 @@ [0x73] = "VDPA_GET_CONFIG", [0x76] = "VDPA_GET_VRING_NUM", [0x78] = "VDPA_GET_IOVA_RANGE", + [0x79] = "VDPA_GET_CONFIG_SIZE", + [0x80] = "VDPA_GET_VQS_COUNT", }; $ Cc: Longpeng <[email protected]> Cc: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/lkml/YksxoFcOARk%[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09KVM: selftests: riscv: Fix alignment of the guest_hang() functionAnup Patel1-1/+1
The guest_hang() function is used as the default exception handler for various KVM selftests applications by setting it's address in the vstvec CSR. The vstvec CSR requires exception handler base address to be at least 4-byte aligned so this patch fixes alignment of the guest_hang() function. Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by: Anup Patel <[email protected]> Tested-by: Mayuresh Chitale <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-04-09KVM: selftests: riscv: Set PTE A and D bits in VS-stage page tableAnup Patel1-1/+3
Supporting hardware updates of PTE A and D bits is optional for any RISC-V implementation so current software strategy is to always set these bits in both G-stage (hypervisor) and VS-stage (guest kernel). If PTE A and D bits are not set by software (hypervisor or guest) then RISC-V implementations not supporting hardware updates of these bits will cause traps even for perfectly valid PTEs. Based on above explanation, the VS-stage page table created by various KVM selftest applications is not correct because PTE A and D bits are not set. This patch fixes VS-stage page table programming of PTE A and D bits for KVM selftests. Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by: Anup Patel <[email protected]> Tested-by: Mayuresh Chitale <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-04-08Merge tag 'linux-kselftest-fixes-5.18-rc2' of ↵Linus Torvalds6-31/+54
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build and run-times fixes to tests: - header dependencies - missing tear-downs to release allocated resources in assert paths - missing error messages when build fails - coccicheck and unused variable warnings" * tag 'linux-kselftest-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/harness: Pass variant to teardown selftests/harness: Run TEARDOWN for ASSERT failures selftests: fix an unused variable warning in pidfd selftest selftests: fix header dependency for pid_namespace selftests selftests: x86: add 32bit build warnings for SUSE selftests/proc: fix array_size.cocci warning selftests/vDSO: fix array_size.cocci warning
2022-04-08Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski52-92/+3757
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-09 We've added 63 non-merge commits during the last 9 day(s) which contain a total of 68 files changed, 4852 insertions(+), 619 deletions(-). The main changes are: 1) Add libbpf support for USDT (User Statically-Defined Tracing) probes. USDTs are an abstraction built on top of uprobes, critical for tracing and BPF, and widely used in production applications, from Andrii Nakryiko. 2) While Andrii was adding support for x86{-64}-specific logic of parsing USDT argument specification, Ilya followed-up with USDT support for s390 architecture, from Ilya Leoshkevich. 3) Support name-based attaching for uprobe BPF programs in libbpf. The format supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g. attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc") now, from Alan Maguire. 4) Various load/store optimizations for the arm64 JIT to shrink the image size by using arm64 str/ldr immediate instructions. Also enable pointer authentication to verify return address for JITed code, from Xu Kuohai. 5) BPF verifier fixes for write access checks to helper functions, e.g. rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that write into passed buffers, from Kumar Kartikeya Dwivedi. 6) Fix overly excessive stack map allocation for its base map structure and buckets which slipped-in from cleanups during the rlimit accounting removal back then, from Yuntao Wang. 7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter connection tracking tuple direction, from Lorenzo Bianconi. 8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde. 9) Minor cleanups all over the place from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) bpf: Fix excessive memory allocation in stack_map_alloc() selftests/bpf: Fix return value checks in perf_event_stackmap test selftests/bpf: Add CO-RE relos into linked_funcs selftests libbpf: Use weak hidden modifier for USDT BPF-side API functions libbpf: Don't error out on CO-RE relos for overriden weak subprogs samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread libbpf: Allow WEAK and GLOBAL bindings during BTF fixup libbpf: Use strlcpy() in path resolution fallback logic libbpf: Add s390-specific USDT arg spec parsing logic libbpf: Make BPF-side of USDT support work on big-endian machines libbpf: Minor style improvements in USDT code libbpf: Fix use #ifdef instead of #if to avoid compiler warning libbpf: Potential NULL dereference in usdt_manager_attach_usdt() selftests/bpf: Uprobe tests should verify param/return values libbpf: Improve string parsing for uprobe auto-attach libbpf: Improve library identification for uprobe binary path resolution selftests/bpf: Test for writes to map key from BPF helpers selftests/bpf: Test passing rdonly mem to global func bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-08selftests/bpf: Fix return value checks in perf_event_stackmap testYuntao Wang1-2/+2
The bpf_get_stackid() function may also return 0 on success as per UAPI BPF helper documentation. Therefore, correct checks from 'val > 0' to 'val >= 0' to ensure that they cover all possible success return values. Signed-off-by: Yuntao Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-08selftests/bpf: Add CO-RE relos into linked_funcs selftestsAndrii Nakryiko2-0/+16
Add CO-RE relocations into __weak subprogs for multi-file linked_funcs selftest to make sure libbpf handles such combination well. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-08libbpf: Use weak hidden modifier for USDT BPF-side API functionsAndrii Nakryiko1-3/+3
Use __weak __hidden for bpf_usdt_xxx() APIs instead of much more confusing `static inline __noinline`. This was previously impossible due to libbpf erroring out on CO-RE relocations pointing to eliminated weak subprogs. Now that previous patch fixed this issue, switch back to __weak __hidden as it's a more direct way of specifying the desired behavior. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-08libbpf: Don't error out on CO-RE relos for overriden weak subprogsAndrii Nakryiko1-4/+11
During BPF static linking, all the ELF relocations and .BTF.ext information (including CO-RE relocations) are preserved for __weak subprograms that were logically overriden by either previous weak subprogram instance or by corresponding "strong" (non-weak) subprogram. This is just how native user-space linkers work, nothing new. But libbpf is over-zealous when processing CO-RE relocation to error out when CO-RE relocation belonging to such eliminated weak subprogram is encountered. Instead of erroring out on this expected situation, log debug-level message and skip the relocation. Fixes: db2b8b06423c ("libbpf: Support CO-RE relocations for multi-prog sections") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-08tools/testing/nvdimm: Fix security_init() symbol collisionDan Williams1-2/+2
Starting with the new perf-event support in the nvdimm core, the nfit_test mock module stops compiling. Rename its security_init() to nfit_security_init(). tools/testing/nvdimm/test/nfit.c:1845:13: error: conflicting types for ‘security_init’; have ‘void(struct nfit_test *)’ 1845 | static void security_init(struct nfit_test *t) | ^~~~~~~~~~~~~ In file included from ./include/linux/perf_event.h:61, from ./include/linux/nd.h:11, from ./drivers/nvdimm/nd-core.h:11, from tools/testing/nvdimm/test/nfit.c:19: Fixes: 9a61d0838cd0 ("drivers/nvdimm: Add nvdimm pmu structure") Cc: Kajol Jain <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Reviewed-by: Vishal Verma <[email protected]> Link: https://lore.kernel.org/r/164904238610.1330275.1889212115373993727.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <[email protected]>
2022-04-08libbpf: Allow WEAK and GLOBAL bindings during BTF fixupAndrii Nakryiko1-2/+5
During BTF fix up for global variables, global variable can be global weak and will have STB_WEAK binding in ELF. Support such global variables in addition to non-weak ones. This is not the problem when using BPF static linking, as BPF static linker "fixes up" BTF during generation so that libbpf doesn't have to do it anymore during bpf_object__open(), which led to this not being noticed for a while, along with a pretty rare (currently) use of __weak variables and maps. Reported-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-08libbpf: Use strlcpy() in path resolution fallback logicAndrii Nakryiko1-1/+1
Coverity static analyzer complains that strcpy() can cause buffer overflow. Use libbpf_strlcpy() instead to be 100% sure this doesn't happen. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-08libbpf: Add s390-specific USDT arg spec parsing logicIlya Leoshkevich1-0/+55
The logic is superficially similar to that of x86, but the small differences (no need for register table and dynamic allocation of register names, no $ sign before constants) make maintaining a common implementation too burdensome. Therefore simply add a s390x-specific version of parse_usdt_arg(). Note that while bcc supports index registers, this patch does not. This should not be a problem in most cases, since s390 uses a default value "nor" for STAP_SDT_ARG_CONSTRAINT. Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.