| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add selftests to verify the firmware upload mechanism. These test
include simple firmware uploads as well as upload cancellation and
error injection. The test creates three firmware devices and verifies
that they all work correctly and independently.
Tested-by: Matthew Gerlach <[email protected]>
Reviewed-by: Luis Chamberlain <[email protected]>
Reviewed-by: Tianfei zhang <[email protected]>
Signed-off-by: Russ Weight <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
These might not be issues yet, but they make the script more fragile.
Also by fixing them we give a better example to future readers, who might
copy/paste or otherwise re-use snippets from our script.
- Use "read -r", since we don't ever want read to be interpreting '\'
characters as escape sequences...
- Quote variables, to deal with spaces properly.
- Use $() instead of the older and harder-to-nest ``.
- Get rid of superfluous "$" prefixes inside arithmetic $(()).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Axel Rasmussen <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Previously, each test printed out its own header, dealt with its own
return code, etc. By just putting this standard stuff in a function, we
can delete > 300 lines from the script.
This also makes adding future tests easier. And, it gets rid of various
inconsistencies that already exist:
- Some tests correctly deal with ksft_skip, but others don't.
- Some tests just print the executable name, others print arguments, and
yet others print some comment in the header.
- Most tests print out a header with two separator lines, but not the
HMM smoke test or the memfd_secret test, which only print one.
- We had a redundant "exit" at the end, with all the boilerplate it's an
easy oversight.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Axel Rasmussen <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This introduces three tests:
1) Sanity check soft dirty basic semantics: allocate area, clean,
dirty, check if the SD bit is flipped.
2) Check VMA reuse: validate the VM_SOFTDIRTY usage
3) Check soft-dirty on huge pages
This was motivated by Will Deacon's fix commit 912efa17e512 ("mm: proc:
Invalidate TLB after clearing soft-dirty page state"). I was tracking the
same issue that he fixed, and this test would have caught it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Co-developed-by: Muhammad Usama Anjum <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Bring common functions to a new file while keeping code as much same as
possible. These functions can be used in the new tests. This helps in
avoiding code duplication.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Gabriel Krisman Bertazi <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Print three possible reasons /sys/kernel/debug/gup_test cannot be opened
to help users of this test diagnose failures.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sidhartha Kumar <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add some basic migration tests and in particular tests that will
stress both the pte and pmd migration entry wait paths.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
After commit 0e4b01df8659 ("mm, memcg: throttle allocators when failing
reclaim over memory.high") allocating memory over memory.high became very
time consuming. But it's exactly what the memory.high test from cgroup
kselftests is doing: it tries to allocate 100M with 30M memory.high value.
It takes forever to complete.
In order to keep it passing (or failing) in a reasonable amount of time
let's try to allocate only a little over 30M: 31M to be precise.
With this change test_memcontrol finishes in a reasonable amount of
time:
$ time ./test_memcontrol
ok 1 test_memcg_subtree_control
ok 2 test_memcg_current
ok 3 test_memcg_min
ok 4 test_memcg_low
ok 5 test_memcg_high
ok 6 test_memcg_max
ok 7 test_memcg_oom_events
ok 8 test_memcg_swap_max
ok 9 test_memcg_sock
ok 10 test_memcg_oom_group_leaf_events
ok 11 test_memcg_oom_group_parent_events
ok 12 test_memcg_oom_group_score_events
real 0m2.273s
user 0m0.064s
sys 0m0.739s
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Cc: Chris Down <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Zefan Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: memcg kselftests fixes".
This patch (of 4):
Commit 9852ae3fe529 ("mm, memcg: consider subtrees in memory.events") made
memory.events recursive: all events are propagated upwards by the tree.
It was a change in semantics.
It broke the oom group leaf events test: it assumes that after an OOM the
oom_kill counter is zero on parent's level.
Let's adjust the test: it should have similar expectations for the child
and parent levels.
The test passes after this fix.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Cc: Chris Down <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Zefan Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
I noticed a detail that needs to be adjusted. When judging whether a page
is allocated by vmalloc, the value of the variable "tmp" was repeatedly
judged, so the code was adjusted.
This work is coauthored by Yinan Zhang, Jiajian Ye, Shenghong Han, Chongxi
Zhao, Yuhong Feng and Yongqiang Liu.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yixuan Cao <[email protected]>
Cc: Chongxi Zhao <[email protected]>
Cc: Haowen Bai <[email protected]>
Cc: Jiajian Ye <[email protected]>
Cc: Sean Anderson <[email protected]>
Cc: Shenghong Han <[email protected]>
Cc: Yinan Zhang <[email protected]>
Cc: Yongqiang Liu <[email protected]>
Cc: Yuhong Feng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
and --sort options
An application is suspected of having memory leak when its memory
consumption is high and keeps increasing. There are several commonly used
memory allocators: slab, cma, vmalloc, etc. The memory leak
identification can be sped up if the page information allocated by an
allocator can be analyzed separately.
This patch provides supports for memory allocator labelling for slab,
vmalloc, and cma. The pages allocated by slab and cma can be confirmed
from the "PFN" line according to the kernel codes, and the label of the
vmalloc allocator can be obtained by analyzing the stack trace. Thanks
for Vlastimil Babka's constructive suggestions.
Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() ->
... -> __vmalloc_node_range() -> __vmalloc_area_node().
__vmalloc_area_node() requests memory through the interface of buddy
allocation system. In the current version, __vmalloc_area_node() uses
four interfaces: alloc_pages_bulk_array_mempolicy(),
alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By
disassembling the code, we find that __vmalloc_area_node() is expanded in
__vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace.
On the test machine, the stack trace of pages allocated by vmalloc has the
following four forms:
__alloc_pages_bulk+0x230/0x6a0
__vmalloc_node_range+0x19c/0x598
alloc_pages_bulk_array_mempolicy+0xbc/0x278
__vmalloc_node_range+0x1e8/0x598
__alloc_pages+0x160/0x2b0
__vmalloc_node_range+0x234/0x598
alloc_pages+0xac/0x150
__vmalloc_node_range+0x44c/0x598
Therefore, in two consecutive lines of stacktrace, if the first line
contains the word "alloc_pages" and the second line contains the word
"__vmalloc_node_range", it can be determined that the page is allocated by
vmalloc. And the function offset and size are not the same on different
machines, so there is no need to match them.
At the same time, this patch updates the --cull and --sort options to
support allocator-based merge statistics and sorting. The added functions
are fully compatible with the original work. When using, you can use
"allocator", or abbreviated as "ator". Relevant updates have also been
made in the documentation(Documentation/vm/page_owner.rst).
Example:
./page_owner_sort <input> <output> --cull=st,pid,name,allocator
./page_owner_sort <input> <output> --sort=ator,pid,name
This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han,
Chongxi Zhao, Yuhong Feng and Yongqiang Liu.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yixuan Cao <[email protected]>
Cc: Chongxi Zhao <[email protected]>
Cc: Haowen Bai <[email protected]>
Cc: Jiajian Ye <[email protected]>
Cc: Sean Anderson <[email protected]>
Cc: Shenghong Han <[email protected]>
Cc: Yinan Zhang <[email protected]>
Cc: Yongqiang Liu <[email protected]>
Cc: Yuhong Feng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
As normal usage, tool will print huge parser log and spend a lot of time
printing, so it would be preferable add "-d" debug control to avoid this
problem.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Haowen Bai <[email protected]>
Cc: Chongxi Zhao <[email protected]>
Cc: Jiajian Ye <[email protected]>
Cc: Shenghong Han <[email protected]>
Cc: Yinan Zhang <[email protected]>
Cc: Yixuan Cao <[email protected]>
Cc: Yongqiang Liu <[email protected]>
Cc: Yuhong Feng <[email protected]>
Cc: Sean Anderson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When viewing page owner information, we may want to sort blocks of
information by multiple keys, since one single key does not uniquely
identify a block. Therefore, following adjustments are made:
1. Add a new --sort option to support sorting blocks of information by
multiple keys.
./page_owner_sort <input> <output> --sort=<order>
./page_owner_sort <input> <output> --sort <order>
<order> is a single argument in the form of a comma-separated list,
which offers a way to specify sorting order.
Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending
order can be specified by adding the + (ascending, default) or - (descend
-ing) prefix to the key:
./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3...
For example, to sort the blocks first by task command name in lexicographic
order and then by pid in ascending numerical order, use the following:
./page_owner_sort <input> <output> --sort=name,+pid
To sort the blocks first by pid in ascending order and then by timestamp
of the page when it is allocated in descending order, use the following:
./page_owner_sort <input> <output> --sort=pid,-alloc_ts
2. Add explanations of a newly added --sort option in the function usage()
and the document(Documentation/vm/page_owner.rst).
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiajian Ye <[email protected]>
Cc: Chongxi Zhao <[email protected]>
Cc: Shenghong Han <[email protected]>
Cc: Yinan Zhang <[email protected]>
Cc: Yixuan Cao <[email protected]>
Cc: Yongqiang Liu <[email protected]>
Cc: Yuhong Feng <[email protected]>
Cc: Haowen Bai <[email protected]>
Cc: Sean Anderson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When viewing page owner information, we may want to select blocks whose
PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis
and aggregation. But currently page_owner_sort only supports selecting
blocks associated with only one specified PID/TGID/TASK_COMM_NAME.
Therefore, following adjustments are made to fix the problem:
1. Enhance selecting function to support the selection of multiple
PIDs/TGIDs/TASK_COMM_NAMEs.
The enhanced usages are as follows:
--pid <pidlist> Select by pid. This selects the blocks whose PID
numbers appear in <pidlist>.
--tgid <tgidlist> Select by tgid. This selects the blocks whose
TGID numbers appear in <tgidlist>.
--name <cmdlist> Select by task command name. This selects the
blocks whose task command name appear in <cmdlist>.
Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of
a comma-separated list,which offers a way to specify individual selecting
rules.
For example, if you want to select blocks whose tgids are 1, 2 or 3, you
have to use 4 commands as follows:
./page_owner_sort <input> <output1> --tgid=1
./page_owner_sort <input> <output2> --tgid=2
./page_owner_sort <input> <output3> --tgid=3
cat <output1> <output2> <output3> > <output>
With this patch, you can use only 1 command to obtain the same result as
above:
./page_owner_sort <input> <output1> --tgid=1,2,3
2. Update explanations of --pid, --tgid and --name in the function
usage() and the document(Documents/vm/page_owner.rst).
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiajian Ye <[email protected]>
Cc: Chongxi Zhao <[email protected]>
Cc: Shenghong Han <[email protected]>
Cc: Yinan Zhang <[email protected]>
Cc: Yixuan Cao <[email protected]>
Cc: Yongqiang Liu <[email protected]>
Cc: Yuhong Feng <[email protected]>
Cc: Haowen Bai <[email protected]>
Cc: Sean Anderson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Error messages should be send to stderr using fprintf() instead of
printf().
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiajian Ye <[email protected]>
Cc: Shenghong Han <[email protected]>
Cc: Yixuan Cao <[email protected]>
Cc: Yinan Zhang <[email protected]>
Cc: Chongxi Zhao <[email protected]>
Cc: Yuhong Feng <[email protected]>
Cc: Yongqiang Liu <[email protected]>
Cc: Haowen Bai <[email protected]>
Cc: Sean Anderson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Fix log_fp memory leak in dispatch_thread_read_log.
Remove obsolete log_fp clean-up code in dispatch_thread.
Also, release memory of subtest_selector. This can be
reproduced with -n 2/1 parameters.
Signed-off-by: Mykola Lysenko <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a test for a bug we had in the 4PB address space SLB handling. It
was fixed in commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on
stack rather than thread_struct").
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a subtest that excercises bpf_map__set_autocreate() API and
validates that libbpf properly fixes up BPF verifier log with correct
map information.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add bpf_map__set_autocreate() API that allows user to opt-out from
libbpf automatically creating BPF map during BPF object load.
This is a useful feature when building CO-RE-enabled BPF application
that takes advantage of some new-ish BPF map type (e.g., socket-local
storage) if kernel supports it, but otherwise uses some alternative way
(e.g., extra HASH map). In such case, being able to disable the creation
of a map that kernel doesn't support allows to successfully create and
load BPF object file with all its other maps and programs.
It's still up to user to make sure that no "live" code in any of their BPF
programs are referencing such map instance, which can be achieved by
guarding such code with CO-RE relocation check or by using .rodata
global variables.
If user fails to properly guard such code to turn it into "dead code",
libbpf will helpfully post-process BPF verifier log and will provide
more meaningful error and map name that needs to be guarded properly. As
such, instead of:
; value = bpf_map_lookup_elem(&missing_map, &zero);
4: (85) call unknown#2001000000
invalid func unknown#2001000000
... user will see:
; value = bpf_map_lookup_elem(&missing_map, &zero);
4: <invalid BPF map reference>
BPF map 'missing_map' is referenced but wasn't created
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Reuse libbpf_mem_ensure() when adding a new map to the list of maps
inside bpf_object. It takes care of proper resizing and reallocating of
map array and zeroing out newly allocated memory.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Detect CO-RE spec truncation and append "..." to make user aware that
there was supposed to be more of the spec there.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add new or modify existing SEC() definitions to be target-less and
validate that libbpf handles such program definitions correctly.
For kprobe/kretprobe we also add explicit test that generic
bpf_program__attach() works in cases when kprobe definition contains
proper target. It wasn't previously tested as selftests code always
explicitly specified the target regardless.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Similar to previous patch, support target-less definitions like
SEC("fentry"), SEC("freplace"), etc. For such BTF-backed program types
it is expected that user will specify BTF target programmatically at
runtime using bpf_program__set_attach_target() *before* load phase. If
not, libbpf will report this as an error.
Aslo use SEC_ATTACH_BTF flag instead of explicitly listing a set of
types that are expected to require attach_btf_id. This was an accidental
omission during custom SEC() support refactoring.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In a lot of cases the target of kprobe/kretprobe, tracepoint, raw
tracepoint, etc BPF program might not be known at the compilation time
and will be discovered at runtime. This was always a supported case by
libbpf, with APIs like bpf_program__attach_{kprobe,tracepoint,etc}()
accepting full target definition, regardless of what was defined in
SEC() definition in BPF source code.
Unfortunately, up till now libbpf still enforced users to specify at
least something for the fake target, e.g., SEC("kprobe/whatever"), which
is cumbersome and somewhat misleading.
This patch allows target-less SEC() definitions for basic tracing BPF
program types:
- kprobe/kretprobe;
- multi-kprobe/multi-kretprobe;
- tracepoints;
- raw tracepoints.
Such target-less SEC() definitions are meant to specify declaratively
proper BPF program type only. Attachment of them will have to be handled
programmatically using correct APIs. As such, skeleton's auto-attachment
of such BPF programs is skipped and generic bpf_program__attach() will
fail, if attempted, due to the lack of enough target information.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Acked-by: Marc Kleine-Budde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
include/linux/netdevice.h
net/core/dev.c
6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats")
794c24e9921f ("net-core: rx_otherhost_dropped to core_stats")
https://lore.kernel.org/all/[email protected]/
drivers/net/wan/cosa.c
d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()")
89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- asus-wmi bug-fixes
- intel-sdsu bug-fixes
- build (warning) fixes
- couple of hw-id additions"
* tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: pmc/core: change pmc_lpm_modes to static
platform/x86/intel/sdsi: Fix bug in multi packet reads
platform/x86/intel/sdsi: Poll on ready bit for writes
platform/x86/intel/sdsi: Handle leaky bucket
platform/x86: intel-uncore-freq: Prevent driver loading in guests
platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard
platform/x86: dell-laptop: Add quirk entry for Latitude 7520
platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails
platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf()
tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
|
|
Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that when building
a program from multiple files we shouldn't separately compile the main
program to an object file as that will result in the pattern rule not
matching when adjusted for the output directory. The other is that we also
need to include $(OUTPUT) in the names of the binaries when specifying the
dependencies in order to ensure that they get picked up with O=.
Rewrite the dependencies for the executables to fix these issues. The
kselftest build system will ensure OUTPUT is always defined.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than using
TEST_PROGS_EXTENDED which is for programs that don't need to be built like
shell scripts. Leave fpsimd-stress and sve-stress there since they are
scripts.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_child_memory.c:110:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:88:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:90:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:147:24-25:
WARNING: Use ARRAY_SIZE
`ARRAY_SIZE` macro is defined in tools/testing/selftests/kselftest.h.
Signed-off-by: Guo Zhengkui <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only check
one word in one horizontal vector of ZA since there's already other tests
that check for data corruption more broadly, we're just looking to make
sure that ZA is still enabled and it looks like the data got copied.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
For every possible combination of SVE and SME vector length verify that for
each possible value of SVCR after a syscall we leave streaming mode and ZA
is preserved. We don't need to take account of any streaming/non streaming
SVE vector length changes in the assembler code since the store instructions
will handle the vector length for us. We log if the system supports FA64 and
only try to set FFR in streaming mode if it does.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
doing syscalls does not discard the ZA state so when we set data in ZA
we run the child process briefly, having it add one to each byte in ZA
in order to validate that both the vector size and data are being read
and written as expected when the process runs.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In order to allow ptrace of streaming mode SVE registers we have added a
new regset for streaming mode which in isolation offers the same ABI as
regular SVE with a different vector type. Add this to the array of regsets
we handle, together with additional tests for the interoperation of the
two regsets.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add test cases for the SME signal handing ABI patterned off the SVE tests.
Due to the small size of the tests and the differences in ABI (especially
around needing to account for both streaming SVE and ZA) there is some code
duplication here.
We currently cover:
- Reporting of the vector length.
- Lack of support for changing vector length.
- Presence and size of register state for streaming SVE and ZA.
As with the SVE tests we do not yet have any validation of register
contents.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registers. The test
loops indefinitely writing a data pattern to ZA then reading it back and
verifying that it's what was expected.
Unlike the other tests we manually assemble the SME instructions since at
present no released toolchain has SME support integrated.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As part of the generic code for signal handling test cases we parse all
signal frames to make sure they have at least the basic form we expect
and that there are no unexpected frames present in the signal context.
Add coverage of the ZA signal frame to this code.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:
- Enter streaming mode immediately on starting the program.
- In streaming mode FFR is removed so skip reading and writing FFR.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The Scalable Matrix Extension adds a new system register TPIDR2 intended to
be used by libc for its own thread specific use, add some kselftests which
exercise the ABI for it.
Since this test should with some adjustment work for TPIDR and any other
similar registers added in future add tests for it in a separate
directory rather than placing it with the other floating point tests,
nothing existing looked suitable so I created a new test directory
called "abi".
Since this feature is intended to be used by libc the test is built as
freestanding code using nolibc so we don't end up with the test program
and libc both trying to manage the register simultaneously and
distrupting each other. As a result of being written using nolibc rather
than using hwcaps to identify if SME is available in the system we check
for the default SME vector length configuration in proc, adding hwcap
support to nolibc seems like disproportionate effort and didn't feel
entirely idiomatic for what nolibc is trying to do.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The Scalable Matrix Extenions (SME) introduces additional register state
with configurable vector lengths, similar to SVE but configured separately.
Extend vlset to support configuring this state with a --sme or -s command
line option.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As for the kernel so that we don't have ambitious toolchain requirements
to build the tests manually encode some of the SVE instructions.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The current tests use the prctls for various things but there's no
coverage of the edges of the interface so add some basics. This isn't
hugely useful as it is (it originally had some coverage for the
combinations with asymmetric mode but we removed the prctl() for that)
but it might be a helpful starting point for future work, for example
covering error handling.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently we just have a big if statement with a non-specific diagnostic
checking both the mode and the tag. Since we'll need to dynamically check
for asymmetric mode support in the system and to improve debugability split
these checks out.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Help people figure out problems by printing a diagnostic when we get an
unexpected asynchronous fault.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The MTE selftests have a helper evaluate_test() which translates a return
code into a call to ksft_test_result_*(). Currently this only handles pass
and fail, silently ignoring any other code. Update the helper to support
skipped tests and log any unknown return codes as an error so we get at
least some diagnostic if anything goes wrong.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently we validate that we can set the floating point state via the SVE
regset and read the data via the FPSIMD regset but we do not valiate that
the opposite case works as expected. Add a test that covers this case,
noting that when reading via SVE regset the kernel has the option of
returning either SVE or FPSIMD data so we need to accept both formats.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|