| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current iteration of IPv6 support requires explicit fields to be set
in addition to not properly support the actual IPv6 addresses properly.
With this change, make it so that the ipv6() bare option is usable to
create wildcarded flows to match broad swaths of ipv6 traffic.
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]>
Signed-off-by: Aaron Conole <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This will be used when setting details about the tunnel to use as
transport. There is a difference between the ODP format between tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the
same way that the vswitchd userspace supports displaying it.
Signed-off-by: Aaron Conole <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
These will be used in upcoming commits to set specific attributes for
interacting with tunnels. Since set() will use the key parsing routine, we
also make sure to prepend it with an open paren, for the action parsing to
properly understand it.
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]>
Signed-off-by: Aaron Conole <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Until recently, the ovs-dpctl utility was used with a limited actions set
and didn't need to have support for multiple similar actions. However,
when adding support for tunnels, it will be important to support multiple
set() actions in a single flow. When printing these actions, the existing
code will be unable to print all of the sets - it will only print the
first.
Refactor this code to be easier to read and support multiple actions of the
same type in an action list.
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]>
Signed-off-by: Aaron Conole <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The OVS module can operate in conjunction with various types of
tunnel ports. These are created as either explicit tunnel vport
types, OR by creating a tunnel interface which acts as an anchor
for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS
datapath for testing various scenarios with tunnel ports. With
this addition, the vswitch "plumbing" will at least be able to
push packets around using the tunnel vports. Future patches
will add support for setting required tunnel metadata for lwts
in the datapath. The end goal will be to push packets via these
tunnels, and will be used in an upcoming commit for testing the
path MTU.
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]>
Signed-off-by: Aaron Conole <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bpf and netfilter.
There are a bunch of regressions addressed here, but hopefully nothing
spectacular. We are still waiting the driver fix from Intel, mentioned
by Jakub in the previous networking pull.
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
TFO
- batman-adv: fix RCU race at module unload time
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not
confirmed
- eth: bonding: fix incorrect software timestamping report
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset
- fix the corner case with may_goto and jump to the 1st insn
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM
transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added"
* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: mana: Fix possible double free in error handling path
selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
af_unix: Don't stop recv() at consumed ex-OOB skb.
selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
selftest: af_unix: Add msg_oob.c.
selftest: af_unix: Remove test_unix_oob.c.
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
net: usb: qmi_wwan: add Telit FN912 compositions
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
ionic: use dev_consume_skb_any outside of napi
net: dsa: microchip: fix wrong register write when masking interrupt
Fix race for duplicate reqsk on identical SYN
ibmvnic: Add tx check to prevent skb leak
...
|
|
Print the guest's random seed during VM creation if and only if the seed
has changed since the seed was last printed. The vast majority of tests,
if not all tests at this point, set the seed during test initialization
and never change the seed, i.e. printing it every time a VM is created is
useless noise.
Snapshot and print the seed during early selftest init to play nice with
tests that use the kselftests harness, at the cost of printing an unused
seed for tests that change the seed during test-specific initialization,
e.g. dirty_log_perf_test. The kselftests harness runs each testcase in a
separate process that is forked from the original process before creating
each testcase's VM, i.e. waiting until first VM creation will result in
the seed being printed by each testcase despite it never changing. And
long term, the hope/goal is that setting the seed will be handled by the
core framework, i.e. that the dirty_log_perf_test wart will naturally go
away.
Reported-by: Yi Lai <[email protected]>
Reported-by: Dapeng Mi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.
Without fix:
# RUN msg_oob.no_peek.oob ...
# msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
# oob: Test terminated by assertion
# FAIL msg_oob.no_peek.oob
not ok 2 msg_oob.no_peek.oob
With fix:
# RUN msg_oob.no_peek.oob ...
# OK msg_oob.no_peek.oob
ok 2 msg_oob.no_peek.oob
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.
This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).
This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.
This patch adds some test cases for SO_OOBINLINE.
Note the new test cases found two bugs in TCP.
1) After reading OOB data with non-inline mode, we can re-read
the data by setting SO_OOBINLINE.
# RUN msg_oob.no_peek.inline_oob_ahead_break ...
# msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
# msg_oob.c:147:inline_oob_ahead_break:TCP :oworld
# OK msg_oob.no_peek.inline_oob_ahead_break
ok 14 msg_oob.no_peek.inline_oob_ahead_break
2) The head OOB data is dropped if SO_OOBINLINE is disabled
if a new OOB data is queued.
# RUN msg_oob.no_peek.inline_ex_oob_drop ...
# msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
# msg_oob.c:172:inline_ex_oob_drop:TCP :y
# msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.inline_ex_oob_drop
ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.
>>> from socket import *
>>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hellowor', MSG_OOB)
8
>>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq.
b'r'
>>> c1.send(b'ld', MSG_OOB)
2
>>> c2.recv(10) # recv() stops at the old consumed OOB
b'hellowo' # should be 'hellowol'
manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.
Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.
Without fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
# msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
# msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
# ex_oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ahead_break
not ok 11 msg_oob.no_peek.ex_oob_ahead_break
With fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
# msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl
# OK msg_oob.no_peek.ex_oob_ahead_break
ok 11 msg_oob.no_peek.ex_oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
While testing, I found some weird behaviour on the TCP side as well.
For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.
# RUN msg_oob.no_peek.ex_oob_drop ...
# msg_oob.c:146:ex_oob_drop:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop:TCP :Resource temporarily unavailable
# msg_oob.c:146:ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:ex_oob_drop:TCP :Invalid argument
# OK msg_oob.no_peek.ex_oob_drop
ok 9 msg_oob.no_peek.ex_oob_drop
# RUN msg_oob.no_peek.ex_oob_drop_2 ...
# msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop_2:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.ex_oob_drop_2
ok 10 msg_oob.no_peek.ex_oob_drop_2
This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
and its peer recv()s "hell" and "o".
>>> c2.recv(10)
b'hell'
>>> c2.recv(1, MSG_OOB)
b'o'
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.
Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
>>> c2.recv(1, MSG_OOB)
b'o'
>>> c2.recv(9, MSG_PEEK) # This should return b'hell'
b'hellworld' # even with enough buffer.
Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.
This patch also adds test cases that add recv(MSG_PEEK) before each recv().
Without fix:
# RUN msg_oob.peek.oob_ahead_break ...
# msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
# msg_oob.c:135:oob_ahead_break:Expected:hell
# msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
# oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.peek.oob_ahead_break
not ok 13 msg_oob.peek.oob_ahead_break
With fix:
# RUN msg_oob.peek.oob_ahead_break ...
# OK msg_oob.peek.oob_ahead_break
ok 13 msg_oob.peek.oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.
The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.
This patch adds only a few tests with basic send() and recv() that
do not fail.
The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.
Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.
Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
We don't want this call to allow an infinite loop in HID-BPF, so let's
have some tests.
Link: https://patch.msgid.link/[email protected]
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Similar to test_multiply_events_wq: we receive one event and inject a
new one. But given that this time we are already in the event hook, we
can use hid_bpf_try_input_report() directly as this function will not
sleep.
Note that the injected event gets processed before the original one this
way.
Link: https://patch.msgid.link/[email protected]
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that bpf_wq is available, we can write a test with it. Having
hid_bpf_input_report() waiting for the device means that we can
directly call it, and we get that event when the device is ready.
Link: https://patch.msgid.link/[email protected]
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
We add 3 new tests:
- first, we make sure we can prevent the output_report to happen
- second, we make sure that we can detect that a given hidraw client
was actually doing the request, and for that client only, call ourself
hid_bpf_hw_output_report(), returning a custom value
- last, we ensure that we can not loop between hooks for
hid_hw_output_report() and manual calls to hid_bpf_hw_output_report()
from that same hook
Link: https://patch.msgid.link/[email protected]
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
We add 3 new tests:
- first, we make sure we can prevent the raw_request to happen
- second, we make sure that we can detect that a given hidraw client
was actually doing the request, and for that client only, call ourself
hid_bpf_hw_request(), returning a custom value
- last, we ensure that we can not loop between hooks for
hid_hw_raw_request() and manual calls to hid_bpf_hw_request() from that
hook
Link: https://patch.msgid.link/[email protected]
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Inside of test_pcm_time() arguments are printed via printf
but '%d' is used to print @flags (of type unsigned int).
Use '%u' instead, just like we do everywhere else.
Signed-off-by: Zhu Jun <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Teach the load generator how to wait for at least given number
of packets to be received. This will be useful for filtering
where we'll want to send a non-trivial number of packets and
make sure they landed in right queues.
Reviewed-by: Breno Leitao <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some devices DMA stats to the host periodically. Add a helper
which can wait for that to happen, based on frequency reported
by the driver in ethtool.
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We use random ports for communication. As Willem predicted
this leads to occasional failures. Try to check if port is
already in use by opening a socket and binding to that port.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ARRAY_SIZE is used on multiple places, move its definition in
bpf_misc.h header.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Guard close() with extra link_fd[i] > 0 and fexit_fd[i] > 0
check to prevent close(-1).
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
and reg->type check
Add new negative selftests which are intended to cover the
out-of-bounds memory access that could be performed on a
CONST_PTR_TO_DYNPTR within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY as an argument, and acceptance of invalid register types
i.e. PTR_TO_BTF_ID within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY.
Reported-by: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Matt Bobrowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The non-contiguous CBM test fails on AMD with:
Starting L3_NONCONT_CAT test ...
Mounting resctrl to "/sys/fs/resctrl"
CPUID output doesn't match 'sparse_masks' file content!
not ok 5 L3_NONCONT_CAT: test
AMD always supports non-contiguous CBM but does not report it via CPUID.
Fix the non-contiguous CBM test to use CPUID to discover non-contiguous
CBM support only on Intel.
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Signed-off-by: Babu Moger <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The KVM RISC-V allows Zcmop extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The KVM RISC-V allows Zca, Zcf, Zcd and Zcb extensions for Guest/VM so
add these extensions to get-reg-list test.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The KVM RISC-V allows Zimop extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
It seems that there is no definition for config IP_GRE, and it is not a
dependency of other configs, so remove it.
linux$ find -name Kconfig | xargs grep "IP_GRE"
<-- nothing
There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends
on NET_IPGRE_DEMUX but not IP_GRE.
Signed-off-by: Yujie Liu <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Userspace builds of the radix-tree testing suite fails because of commit
test_maple_tree: add the missing MODULE_DESCRIPTION() macro. Add the
proper defines to tools/testing/radix-tree/maple.c and
tools/testing/radix-tree/xarray.c so MODULE_DESCRIPTION has a definition.
This allows the build to succeed.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9f8090e8c4d1 ("test_maple_tree: add the missing MODULE_DESCRIPTION() macro")
Signed-off-by: Sidhartha Kumar <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Cc: Jeff Johnson <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
/proc/${pid}/status got Kthread field recently.
Test that userspace program is not reported as kernel thread.
Test that kernel thread is reported as kernel thread.
Use kthreadd with pid 2 for this.
Link: https://lkml.kernel.org/r/818c4c41-8668-4566-97a9-7254abf819ee@p183
Signed-off-by: Alexey Dobriyan <[email protected]>
Cc: Chunguang Wu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add several new test cases which assert corner cases on the eventfd
mechanism, for example, the supplied buffer is less than 8 bytes,
attempting to write a value that is too large, etc.
./eventfd_test
# Starting 9 tests from 1 test cases.
# RUN global.eventfd_check_flag_rdwr ...
# OK global.eventfd_check_flag_rdwr
ok 1 global.eventfd_check_flag_rdwr
# RUN global.eventfd_check_flag_cloexec ...
# OK global.eventfd_check_flag_cloexec
ok 2 global.eventfd_check_flag_cloexec
# RUN global.eventfd_check_flag_nonblock ...
# OK global.eventfd_check_flag_nonblock
ok 3 global.eventfd_check_flag_nonblock
# RUN global.eventfd_chek_flag_cloexec_and_nonblock ...
# OK global.eventfd_chek_flag_cloexec_and_nonblock
ok 4 global.eventfd_chek_flag_cloexec_and_nonblock
# RUN global.eventfd_check_flag_semaphore ...
# OK global.eventfd_check_flag_semaphore
ok 5 global.eventfd_check_flag_semaphore
# RUN global.eventfd_check_write ...
# OK global.eventfd_check_write
ok 6 global.eventfd_check_write
# RUN global.eventfd_check_read ...
# OK global.eventfd_check_read
ok 7 global.eventfd_check_read
# RUN global.eventfd_check_read_with_nonsemaphore ...
# OK global.eventfd_check_read_with_nonsemaphore
ok 8 global.eventfd_check_read_with_nonsemaphore
# RUN global.eventfd_check_read_with_semaphore ...
# OK global.eventfd_check_read_with_semaphore
ok 9 global.eventfd_check_read_with_semaphore
# PASSED: 9 / 9 tests passed.
# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Wen Yang <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Tim Bird <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about several cases of using a signed integer for the
priority argument to mq_receive(3), which expects an unsigned int.
Fix this by declaring the type as unsigned int in all cases.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: John Hubbard <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Valentin Obst <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
After calling fork() in test_prctl_fork_exec(), the global variable
ksm_full_scans_fd is initialized to 0 in the child process upon entering
the main function of ./ksm_functional_tests.
In the function call chain test_child_ksm() -> __mmap_and_merge_range ->
ksm_merge-> ksm_get_full_scans, start_scans = ksm_get_full_scans() will
return an error. Therefore, the value of ksm_full_scans_fd needs to be
initialized before calling test_child_ksm in the child process.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: aigourensheng <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a set of tests to validate that stack traces captured from or in the
presence of active uprobes and uretprobes are valid and complete.
For this we use BPF program that are installed either on entry or exit
of user function, plus deep-nested USDT. One of target funtions
(target_1) is recursive to generate two different entries in the stack
trace for the same uprobe/uretprobe, testing potential edge conditions.
If there is no fixes, we get something like this for one of the scenarios:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb3 (in target_4)
ENTRY #1: 0x758fd3 (in target_2)
ENTRY #2: 0x758ffd (in target_1)
ENTRY #3: 0x7fffffffe000
ENTRY #4: 0x7fffffffe000
ENTRY #5: 0x6f8f39
ENTRY #6: 0x6fa6f0
ENTRY #7: 0x7f403f229590
Entry #3 and #4 (0x7fffffffe000) are uretprobe trampoline addresses
which obscure actual target_1 and another target_1 invocations. Also
note that between entry #0 and entry #1 we are missing an entry for
target_3.
With fixes, we get desired full stack traces:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb7 (in target_4)
ENTRY #1: 0x758fc8 (in target_3)
ENTRY #2: 0x758fd3 (in target_2)
ENTRY #3: 0x758ffd (in target_1)
ENTRY #4: 0x758ff3 (in target_1)
ENTRY #5: 0x75922c (in caller)
ENTRY #6: 0x6f8f39
ENTRY #7: 0x6fa6f0
ENTRY #8: 0x7f986adc4cd0
Now there is a logical and complete sequence of function calls.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-24
We've added 12 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 412 insertions(+), 16 deletions(-).
The main changes are:
1) Fix a BPF verifier issue validating may_goto with a negative offset,
from Alexei Starovoitov.
2) Fix a BPF verifier validation bug with may_goto combined with jump to
the first instruction, also from Alexei Starovoitov.
3) Fix a bug with overrunning reservations in BPF ring buffer,
from Daniel Borkmann.
4) Fix a bug in BPF verifier due to missing proper var_off setting related
to movsx instruction, from Yonghong Song.
5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(),
from Daniil Dulov.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: Remove WARN() from __xdp_reg_mem_model()
selftests/bpf: Add tests for may_goto with negative offset.
bpf: Fix may_goto with negative offset.
selftests/bpf: Add more ring buffer test coverage
bpf: Fix overrunning reservations in ringbuf
selftests/bpf: Tests with may_goto and jumps to the 1st insn
bpf: Fix the corner case with may_goto and jump to the 1st insn.
bpf: Update BPF LSM maintainer list
bpf: Fix remap of arena.
selftests/bpf: Add a few tests to cover
bpf: Add missed var_off setting in coerce_subreg_to_size_sx()
bpf: Add missed var_off setting in set_sext32_default_val()
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add few tests with may_goto and negative offset.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test coverage for reservations beyond the ring buffer size in order
to validate that bpf_ringbuf_reserve() rejects the request with NULL, all
other ring buffer tests keep passing as well:
# ./vmtest.sh -- ./test_progs -t ringbuf
[...]
./test_progs -t ringbuf
[ 1.165434] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz
[ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns
[ 1.289555] clocksource: Switched to clocksource tsc
#274/1 ringbuf/ringbuf:OK
#274/2 ringbuf/ringbuf_n:OK
#274/3 ringbuf/ringbuf_map_key:OK
#274/4 ringbuf/ringbuf_write:OK
#274 ringbuf:OK
#275 ringbuf_multi:OK
[...]
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
[ Test fixups for getting BPF CI back to work ]
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
commit 606af8293cd8 ("KVM: selftests: arm64: Test vCPU-scoped feature ID
registers") intended to test that MPIDR_EL1 is unchanged across vCPU
reset but failed at actually doing so.
Add the missing assertion.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|