| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This initial code does a simple sample transfer tests. By default,
all PCM devices are detected and tested with short and long
buffering parameters for 4 seconds. If the sample transfer timing
is not in a +-100ms boundary, the test fails. Only the interleaved
buffering scheme is supported in this version.
The configuration may be modified with the configuration files.
A specific hardware configuration is detected and activated
using the sysfs regex matching. This allows to use the DMI string
(/sys/class/dmi/id/* tree) or any other system parameters
exposed in sysfs for the matching for the CI automation.
The configuration file may also specify the PCM device list to detect
the missing PCM devices.
v1..v2:
- added missing alsa-local.h header file
Cc: Mark Brown <[email protected]>
Cc: Pierre-Louis Bossart <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Jesse Barnes <[email protected]>
Cc: Jimmy Cheng-Yi Chiang <[email protected]>
Cc: Curtis Malainey <[email protected]>
Cc: Brian Norris <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Enable unprivileged bpf for selftests kernel by default.
This forces CI to run test_verifier tests in both privileged
and unprivileged modes.
The test_verifier.c:do_test uses sysctl kernel.unprivileged_bpf_disabled
to decide whether to run or to skip test cases in unprivileged mode.
The CONFIG_BPF_UNPRIV_DEFAULT_OFF controls the default value of the
kernel.unprivileged_bpf_disabled.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Verify that nullness information is porpagated in the branches of
register to register JEQ and JNE operations.
Signed-off-by: Eduard Zingerman <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
There is no point in failing the tests when RTC is not present.
Reported-by: Linux Kernel Functional Testing <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Tested-by: Daniel Diaz <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Insert 3 programs to check that we are doing the correct thing:
'2', '1', '3' are inserted, but '1' is supposed to be executed first.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Simple report descriptor override in HID: replace part of the report
descriptor from a static definition in the bpf kernel program.
Note that this test should be run last because we disconnect/reconnect
the device, meaning that it changes the overall uhid device.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Add tests for the newly implemented function.
We test here only the GET_REPORT part because the other calls are pure
HID protocol and won't infer the result of the test of the bpf hook.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Use a different report with a bigger size and ensures we are doing
things properly.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The tests are pretty basic:
- create a virtual uhid device that no userspace will like (to not mess
up the running system)
- attach a BPF prog to it
- open the matching hidraw node
- inject one event and check:
* that the BPF program can do something on the event stream
* can modify the event stream
- add another test where we attach/detach BPF programs to see if we get
errors
Note: the Makefile is extracted from selftests/bpf so we can rebuild
the libbpf and bpftool components from the current kernel tree without
relying on system installed components.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Currently, verifier uses MEM_ALLOC type tag to specially tag memory
returned from bpf_ringbuf_reserve helper. However, this is currently
only used for this purpose and there is an implicit assumption that it
only refers to ringbuf memory (e.g. the check for ARG_PTR_TO_ALLOC_MEM
in check_func_arg_reg_off).
Hence, rename MEM_ALLOC to MEM_RINGBUF to indicate this special
relationship and instead open the use of MEM_ALLOC for more generic
allocations made for user types.
Also, since ARG_PTR_TO_ALLOC_MEM_OR_NULL is unused, simply drop it.
Finally, update selftests using 'alloc_' verifier string to 'ringbuf_'.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
test_cpuset_prs.sh is failing with the following error:
test_cpuset_prs.sh: line 29: [[: 8
57%: syntax error in expression (error token is "57%")
This is happening because `lscpu | grep "^CPU(s)"` returns two lines in
some systems (such as Debian unstable):
# lscpu | grep "^CPU(s)"
CPU(s): 8
CPU(s) scaling MHz: 55%
This is a simple fix that discard the second line.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Kamalesh Babulal <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
In preparation for cxl_acpi walking pci_root->bus->bridge, add that
association to the mock pci_root instances.
Note that the missing 3rd entry in mock_pci_root[] was not noticed until
now given that the test version of to_cxl_host_bridge()
(tools/testing/cxl/mock_acpi.c), obviated the need for that entry.
However, "cxl/acpi: Improve debug messages in cxl_acpi_probe()" [1]
needs pci_root->bus->bridge to be populated.
Link: https://lore.kernel.org/r/[email protected] [1]
Cc: Robert Richter <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
CXL dports are added in a couple of code paths using
devm_cxl_add_dport(). Debug messages are individually generated, but are
incomplete and inconsistent. Change this by moving its generation to
devm_cxl_add_dport(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_dport() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix following coccicheck warning:
tools/testing/selftests/arm64/mte/check_mmap_options.c:64:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:66:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:135:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:96:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:190:24-25:
WARNING: Use ARRAY_SIZE
Signed-off-by: KaiLong Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
'time' is the local variable of run_test() function, while 'max_time' is
the local variable of do_transfer() function. So in do_transfer(),
$max_time should be used, not $time.
Please note that here $time == $max_time so the behaviour is not changed
but the right variable is used.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-11-11
We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).
The main changes are:
1) Veristat tool improvements to support custom filtering, sorting, and replay
of results, from Andrii Nakryiko.
2) BPF verifier precision tracking fixes and improvements,
from Andrii Nakryiko.
3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
Donald Hunter, Maryam Tahhan, Bagas Sanjaya.
4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
Eduard Zingerman.
5) Fix veth driver panic if XDP program is attached before veth_open, from
John Fastabend.
6) BPF verifier clean ups and fixes in preparation for follow up features,
from Kumar Kartikeya Dwivedi.
7) Add access to hwtstamp field from BPF sockops programs,
from Martin KaFai Lau.
8) Various fixes for BPF selftests and samples, from Artem Savkov,
Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.
9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
selftests/bpf: fix veristat's singular file-or-prog filter
selftests/bpf: Test skops->skb_hwtstamp
selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
bpf: Add hwtstamp field for the sockops prog
selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
bpf, docs: Document BPF_MAP_TYPE_ARRAY
docs/bpf: Document BPF map types QUEUE and STACK
docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
libbpf: Hashmap.h update to fix build issues using LLVM14
bpf: veth driver panics when xdp prog attached before veth_open
selftests: Fix test group SKIPPED result
selftests/bpf: Tests for btf_dedup_resolve_fwds
libbpf: Resolve unambigous forward declarations
libbpf: Hashmap interface update to allow both long and void* keys/values
samples/bpf: Fix sockex3 error: Missing BPF prog type
selftests/bpf: Fix u32 variable compared with less than zero
Documentation: bpf: Escape underscore in BPF type name prefix
selftests/bpf: Use consistent build-id type for liburandom_read.so
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Andrii Nakryiko says:
====================
bpf 2022-11-11
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 11 files changed, 83 insertions(+), 74 deletions(-).
The main changes are:
1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes,
from Alban Crequy.
2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment,
from Baisong Zhong.
3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with
a small build fix on top, from Peter Zijlstra and Nathan Chancellor.
4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen.
5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and
Yang Jihong.
6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai.
7) Fix copy_map_value() to track special zeroed out areas properly,
from Xu Kuohai.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix offset calculation error in __copy_map_value and zero_map_value
bpf: Initialize same number of free nodes for each pcpu_freelist
selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT
maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
selftests/bpf: Fix test_progs compilation failure in 32-bit arch
selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms
bpf: Fix memory leaks in __check_func_call
bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE()
bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)
bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
|
|
Fix the bug of filtering out filename too early, before we know the
program name, if using unified file-or-prog filter (i.e., -f
<any-glob>). Because we try to filter BPF object file early without
opening and parsing it, if any_glob (file-or-prog) filter is used we
have to accept any filename just to get program name, which might match
any_glob.
Fixes: 10b1b3f3e56a ("selftests/bpf: consolidate and improve file/prog filtering in veristat")
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:
- Tweak for the TCP zero-copy io_uring self test (Pavel)
- Rather than use our internal cached value of number of CQ events
available, use what the user can see (Dylan)
- Fix a typo in a comment, added in this release (me)
- Don't allow wrapping while adding provided buffers (me)
- Fix a double poll race, and add a lockdep assertion for it too
(Pavel)"
* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
io_uring/poll: lockdep annote io_poll_req_insert_locked
io_uring/poll: fix double poll req->flags races
io_uring: check for rollover of buffer ID when providing buffers
io_uring: calculate CQEs from the user visible value
io_uring: fix typo in io_uring.h comment
selftests/net: don't tests batched TCP io_uring zc
|
|
This patch tests reading the skops->skb_hwtstamp field.
A local test was also done such that the shinfo hwtstamp was temporary
set to a non zero value in the kernel bpf_skops_parse_hdr()
and the same value can be read by the skops test.
An adjustment is needed to the btf_dump selftest because
the changes in the 'struct bpf_sock_ops'.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch fixes the incorrect ASSERT test in tcp_hdr_options during
the CHECK to ASSERT macro cleanup.
Fixes: 3082f8cd4ba3 ("selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macros")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Wang Yufen <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
xdp_synproxy fails to be compiled in the 32-bit arch, log is as follows:
xdp_synproxy.c: In function 'parse_options':
xdp_synproxy.c:175:36: error: left shift count >= width of type [-Werror=shift-count-overflow]
175 | *tcpipopts = (mss6 << 32) | (ttl << 24) | (wscale << 16) | mss4;
| ^~
xdp_synproxy.c: In function 'syncookie_open_bpf_maps':
xdp_synproxy.c:289:28: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
289 | .map_ids = (__u64)map_ids,
| ^
Fix it.
Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Yang Jihong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This commit tests previous fix of bpf_probe_read_kernel_str().
The BPF helper bpf_probe_read_kernel_str should return -EFAULT when
given a bad source pointer and the target buffer should only be modified
to make the string NULL terminated.
bpf_probe_read_kernel_str() was previously inserting a NULL before the
beginning of the dst buffer. This test should ensure that the
implementation stays correct for now on.
Without the fix, this test will fail as follows:
$ cd tools/testing/selftests/bpf
$ make
$ sudo ./test_progs --name=varlen
...
test_varlen:FAIL:check got 0 != exp 66
Signed-off-by: Alban Crequy <[email protected]>
Signed-off-by: Francis Laniel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Changes v1 to v2:
- add ack tag
- fix my email
- rebase on bpf tree and tag for bpf tree
|
|
drivers/net/can/pch_can.c
ae64438be192 ("can: dev: fix skb drop check")
1dd1b521be85 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
|
|
Add some mix of tests into page_fault_test: memory regions with all the
pairwise combinations of read-only, userfaultfd, and dirty-logging. For
example, writing into a read-only region which has a hole handled with
userfaultfd.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some readonly memslot tests into page_fault_test. Mark the data and/or
page-table memory regions as readonly, perform some accesses, and check
that the right fault is triggered when expected (e.g., a store with no
write-back should lead to an mmio exit).
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some dirty logging tests into page_fault_test. Mark the data and/or
page-table memory regions for dirty logging, perform some accesses, and
check that the dirty log bits are set or clean when expected.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some userfaultfd tests into page_fault_test. Punch holes into the
data and/or page-table memslots, perform some accesses, and check that
the faults are taken (or not taken) when expected.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new test for stage 2 faults when using different combinations of
guest accesses (e.g., write, S1PTW), backing source type (e.g., anon)
and types of faults (e.g., read on hugetlbfs with a hole). The next
commits will add different handling methods and more faults (e.g., uffd
and dirty logging). This first commit starts by adding two sanity checks
for all types of accesses: AF setting by the hw, and accessing memslots
with holes.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
allocations
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <[email protected]>
Cc: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Refactor virt_arch_pgd_alloc() and vm_vaddr_alloc() in both RISC-V and
aarch64 to fix the alignment of parameters in a couple of calls. This will
make it easier to fix the alignment in a future commit that adds an extra
parameter (that happens to be very long).
No functional change intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <[email protected]>
Cc: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the backing_src_type into struct userspace_mem_region. This struct
already stores a lot of info about memory regions, except the backing
source type. This info will be used by a future commit in order to
determine the method for punching a hole.
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Define macros for memory type indexes and construct DEFAULT_MAIR_EL1
with macros from asm/sysreg.h. The index macros can then be used when
constructing PTEs (instead of using raw numbers).
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Deleting a memslot (when freeing a VM) is not closing the backing fd,
nor it's unmapping the alias mapping. Fix by adding the missing close
and munmap.
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a library function to get the PTE (a host virtual address) of a
given GVA. This will be used in a future commit by a test to clear and
check the access flag of a particular page.
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move the generic userfaultfd code out of demand_paging_test.c into a
common library, userfaultfd_util. This library consists of a setup and a
stop function. The setup function starts a thread for handling page
faults using the handler callback function. This setup returns a
uffd_desc object which is then used in the stop function (to wait and
destroy the threads).
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the debug-exceptions test always uses only
{break,watch}point#0 and the highest numbered context-aware
breakpoint. Modify the test to use all {break,watch}points and
context-aware breakpoints supported on the system.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the debug-exceptions test doesn't have a test case for
a linked watchpoint. Add a test case for the linked watchpoint to
the test. The new test case uses the highest numbered context-aware
breakpoint (for Context ID match), and the watchpoint#0, which is
linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the debug-exceptions test doesn't have a test case for
a linked breakpoint. Add a test case for the linked breakpoint to
the test. The new test case uses a pair of breakpoints. One is the
higiest numbered context-aware breakpoint (for Context ID match),
and the other one is the breakpoint#0 (for Address Match), which
is linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Change debug_version() to take the ID_AA64DFR0_EL1 value instead of
vcpu as an argument, and change its callsite to read ID_AA64DFR0_EL1
(and pass it to debug_version()).
Subsequent patches will reuse the register value in the callsite.
No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, debug-exceptions test unnecessarily tracks some test stages
using GUEST_SYNC(). The code for it needs to be updated as test cases
are added or removed. Stop doing the unnecessary stage tracking,
as they are not so useful and are a bit pain to maintain.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add helpers to enable breakpoint and watchpoint exceptions.
No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove the hard-coded {break,watch}point #0 from the guest_code() in
debug-exceptions to allow {break,watch}point number to be specified.
Change reset_debug_state() to zeroing all dbg{b,w}{c,v}r_el0 registers
so that guest_code() can use the function to reset those registers
even when non-zero {break,watch}points are specified for guest_code().
Subsequent patches will add test cases for non-zero {break,watch}points.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce helpers in the debug-exceptions test to write to
dbg{b,w}{c,v}r registers. Those helpers will be useful for
test cases that will be added to the test in subsequent patches.
No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Use FIELD_GET() macro to extract ID register fields for existing
aarch64 selftests code. No functional change intended.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The memory area in each slot should be aligned to host page size.
Otherwise, the test will fail. For example, the following command
fails with the following messages with 64KB-page-size-host and
4KB-pae-size-guest. It's not user friendly to abort the test.
Lets do something to report the optimal memory slots, instead of
failing the test.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Adding slots 1..999, each slot with 8 pages + 216 extra pages last
==== Test Assertion Failure ====
lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
pid=19872 tid=19872 errno=0 - Success
1 0x00000000004065b3: vm_userspace_mem_region_add at kvm_util.c:822
2 0x0000000000401d6b: prepare_vm at memslot_perf_test.c:273
3 (inlined by) test_execute at memslot_perf_test.c:756
4 (inlined by) test_loop at memslot_perf_test.c:994
5 (inlined by) main at memslot_perf_test.c:1073
6 0x0000ffff7ebb4383: ?? ??:0
7 0x00000000004021ff: _start at :?
Number of guest pages is not compatible with the host. Try npages=16
Report the optimal memory slots instead of failing the test when
the memory area in each slot isn't aligned to host page size. With
this applied, the optimal memory slots is reported.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Memslot count too high for this test, decrease the cap (max is 514)
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|