| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Verify that clone3 can be called successfully with CLONE_NEWTIME in
flags.
Cc: Andrey Vagin <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Tobias Klauser <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
It can be helpful to know which card numbers apply to which cards in a
multi-card system so log the card names when we start the test programs.
People looking at the logs may not have direct access to the systems being
tested.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Currently we only log the names of controls on error but it can be useful
to know what control we're testing (for example, when looking at why the
tests are taking a while to run). People looking at test logs may not have
direct access to the target system. This will increase the amount we write
to the console, hopefully that's buffered.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
If a control has an invalid default value then we might fail to set it
when restoring the default value after our write tests, for example due to
correctly implemented range checks in put() operations. Currently this
causes us to report the tests we were running as failed even when the
operation we were trying to test is successful, making it look like there
are problems where none really exist. Stop doing this, only reporting any
issues during the actual test.
We already have validation for the initial readback being in spec and for
writing the default value back so failed tests will be reported for these
controls, and we log an error on the operation that failed when we write so
there will be a diagnostic warning the user that there is a problem.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230224-alsa-mixer-test-restore-invalid-v1-1-454f0f1f2c4b@kernel.org
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This patch adds randomized nested locking to the rtmutex torture
tests. Additionally it adds LOCK09 config files for testing
rtmutexes with nested locking.
Cc: Davidlohr Bueso <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Valentin Schneider <[email protected]>
Cc: Dietmar Eggemann <[email protected]>
Cc: [email protected]
Reviewed-by: Davidlohr Bueso <[email protected]>
Co-developed-by: Connor O'Brien <[email protected]>
Signed-off-by: Connor O'Brien <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This patch adds randomized nested locking to the mutex torture
tests, as well as new LOCK08 config files for testing mutexes
with nested locking
Cc: Davidlohr Bueso <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Valentin Schneider <[email protected]>
Cc: Dietmar Eggemann <[email protected]>
Cc: [email protected]
Reviewed-by: Davidlohr Bueso <[email protected]>
Co-developed-by: Connor O'Brien <[email protected]>
Signed-off-by: Connor O'Brien <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-03-06
We've added 85 non-merge commits during the last 13 day(s) which contain
a total of 131 files changed, 7102 insertions(+), 1792 deletions(-).
The main changes are:
1) Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses, from Joanne Koong.
2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities,
from Andrii Nakryiko.
3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc,
from Alexei Starovoitov.
4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps, from Kumar Kartikeya Dwivedi.
5) Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them,
from Eduard Zingerman.
6) Make uprobe attachment Android APK aware by supporting attachment
to functions inside ELF objects contained in APKs via function names,
from Daniel Müller.
7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper
to start the timer with absolute expiration value instead of relative
one, from Tero Kristo.
8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id,
from Tejun Heo.
9) Extend libbpf to support users manually attaching kprobes/uprobes
in the legacy/perf/link mode, from Menglong Dong.
10) Implement workarounds in the mips BPF JIT for DADDI/R4000,
from Jiaxun Yang.
11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT,
from Hengqi Chen.
12) Extend BPF instruction set doc with describing the encoding of BPF
instructions in terms of how bytes are stored under big/little endian,
from Jose E. Marchesi.
13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui.
14) Fix bpf_xdp_query() backwards compatibility on old kernels,
from Yonghong Song.
15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS,
from Florent Revest.
16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache,
from Hou Tao.
17) Fix BPF verifier's check_subprogs to not unnecessarily mark
a subprogram with has_tail_call, from Ilya Leoshkevich.
18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode
selftests/bpf: Split test_attach_probe into multi subtests
libbpf: Add support to set kprobe/uprobe attach mode
tools/resolve_btfids: Add /libsubcmd to .gitignore
bpf: add support for fixed-size memory pointer returns for kfuncs
bpf: generalize dynptr_get_spi to be usable for iters
bpf: mark PTR_TO_MEM as non-null register type
bpf: move kfunc_call_arg_meta higher in the file
bpf: ensure that r0 is marked scratched after any function call
bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper
bpf: clean up visit_insn()'s instruction processing
selftests/bpf: adjust log_fixup's buffer size for proper truncation
bpf: honor env->test_state_freq flag in is_state_visited()
selftests/bpf: enhance align selftest's expected log matching
bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER}
bpf: improve stack slot state printing
selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access()
selftests/bpf: test if pointer type is tracked for BPF_ST_MEM
bpf: allow ctx writes using BPF_ST_MEM instruction
bpf: Use separate RCU callbacks for freeing selem
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-06
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 9 files changed, 64 insertions(+), 18 deletions(-).
The main changes are:
1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier,
that is, keep resolving such instances instead of bailing out,
from Lorenz Bauer.
2) Fix BPF test framework with regards to xdp_frame info misplacement
in the "live packet" code, from Alexander Lobakin.
3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX,
from Liu Jian.
4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n,
from Randy Dunlap.
5) Several BPF doc fixes with either broken links or external instead
of internal doc links, from Bagas Sanjaya.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: check that modifier resolves after pointer
btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES
bpf, doc: Link to submitting-patches.rst for general patch submission info
bpf, doc: Do not link to docs.kernel.org for kselftest link
bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
riscv, bpf: Fix patch_text implicit declaration
bpf, docs: Fix link to BTF doc
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix spelling mistakes in run.sh "drvier" => "driver" and
in gitsource.sh "senconds" => "seconds".
Signed-off-by: Sukrut Bellary <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add basic support to run m68k under QEMU via kunit_tool.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Bring back the Python scripts that were initially added with
TEST_GEN_FILES but now with TEST_FILES to avoid having them deleted
when doing a clean. Also fix the way the architecture is being
determined as they should also be installed when ARCH=x86_64 is
provided explicitly. Then also append extra files to TEST_FILES and
TEST_PROGS with += so they don't get discarded.
Fixes: ba2d788aa873 ("selftests: amd-pstate: Trigger tbench benchmark and test cpus")
Fixes: a49fb7218ed8 ("selftests: amd-pstate: Don't delete source files via Makefile")
Signed-off-by: Guillaume Tucker <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.
Signed-off-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
&xdp_buff and &xdp_frame are bound in a way that
xdp_buff->data_hard_start == xdp_frame
It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:
for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}
shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.
Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.
Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.
(was found while testing XDP traffic generator on ice, which calls
xdp_convert_frame_to_buff() for each XDP frame)
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add the testing for kprobe/uprobe attaching in default, legacy, perf and
link mode. And the testing passed:
./test_progs -t attach_probe
$5/1 attach_probe/manual-default:OK
$5/2 attach_probe/manual-legacy:OK
$5/3 attach_probe/manual-perf:OK
$5/4 attach_probe/manual-link:OK
$5/5 attach_probe/auto:OK
$5/6 attach_probe/kprobe-sleepable:OK
$5/7 attach_probe/uprobe-lib:OK
$5/8 attach_probe/uprobe-sleepable:OK
$5/9 attach_probe/uprobe-ref_ctr:OK
$5 attach_probe:OK
Summary: 1/9 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Biao Jiang <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In order to adapt to the older kernel, now we split the "attach_probe"
testing into multi subtests:
manual // manual attach tests for kprobe/uprobe
auto // auto-attach tests for kprobe and uprobe
kprobe-sleepable // kprobe sleepable test
uprobe-lib // uprobe tests for library function by name
uprobe-sleepable // uprobe sleepable test
uprobe-ref_ctr // uprobe ref_ctr test
As sleepable kprobe needs to set BPF_F_SLEEPABLE flag before loading,
we need to move it to a stand alone skel file, in case of it is not
supported by kernel and make the whole loading fail.
Therefore, we can only enable part of the subtests for older kernel.
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Biao Jiang <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
argument
This can now be covered since we have a full struct device.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
iommufd wants to use more infrastructure, like the iommu_group, that the
mock device does not support. Create a more complete mock device that can
go through the whole cycle of ownership, blocking domain, and has an
iommu_group.
This requires creating a real struct device on a real bus to be able to
connect it to a iommu_group. Unfortunately we cannot formally attach the
mock iommu driver as an actual driver as the iommu core does not allow
more than one driver or provide a general way for busses to link to
iommus. This can be solved with a little hack to open code the dev_iommus
struct.
With this infrastructure things work exactly the same as the normal domain
path, including the auto domains mechanism and direct attach of hwpts. As
the created hwpt is now an autodomain it is no longer required to destroy
it and trying to do so will trigger a failure.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
For consistency.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
In this case the domain_id was acting as the hwpt_id, so be clearer.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Nothing uses this for anything more than checking if a mock domain had
been created. Rename it to stdev_id to match our naming system. Currently
domain_id is the hwpt_id.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
It is too confusing now that we have the 'dev_id' as part of the main
interface. Make it clear this is the special selftest device object. This
object is analogous to the VFIO device FD.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Adjust log_fixup's expected buffer length to fix the test. It's pretty
finicky in its length expectation, but it doesn't break often. So just
adjust the length to work on current kernel and with follow up iterator
changes as well.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Allow to search for expected register state in all the verifier log
output that's related to specified instruction number.
See added comment for an example of possible situation that is happening
due to a simple enhancement done in the next patch, which fixes handling
of env->test_state_freq flag in state checkpointing logic.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Function verifier.c:convert_ctx_access() applies some rewrites to BPF
instructions that read or write BPF program context. This commit adds
machinery to allow test cases that inspect BPF program after these
rewrites are applied.
An example of a test case:
{
// Shorthand for field offset and size specification
N(CGROUP_SOCKOPT, struct bpf_sockopt, retval),
// Pattern generated for field read
.read = "$dst = *(u64 *)($ctx + bpf_sockopt_kern::current_task);"
"$dst = *(u64 *)($dst + task_struct::bpf_ctx);"
"$dst = *(u32 *)($dst + bpf_cg_run_ctx::retval);",
// Pattern generated for field write
.write = "*(u64 *)($ctx + bpf_sockopt_kern::tmp_reg) = r9;"
"r9 = *(u64 *)($ctx + bpf_sockopt_kern::current_task);"
"r9 = *(u64 *)(r9 + task_struct::bpf_ctx);"
"*(u32 *)(r9 + bpf_cg_run_ctx::retval) = $src;"
"r9 = *(u64 *)($ctx + bpf_sockopt_kern::tmp_reg);" ,
},
For each test case, up to three programs are created:
- One that uses BPF_LDX_MEM to read the context field.
- One that uses BPF_STX_MEM to write to the context field.
- One that uses BPF_ST_MEM to write to the context field.
The disassembly of each program is compared with the pattern specified
in the test case.
Kernel code for disassembly is reused (as is in the bpftool).
To keep Makefile changes to the minimum, symbolic links to
`kernel/bpf/disasm.c` and `kernel/bpf/disasm.h ` are added.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Check that verifier tracks pointer types for BPF_ST_MEM instructions
and reports error if pointer types do not match for different
execution branches.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Lift verifier restriction to use BPF_ST_MEM instructions to write to
context data structures. This requires the following changes:
- verifier.c:do_check() for BPF_ST updated to:
- no longer forbid writes to registers of type PTR_TO_CTX;
- track dst_reg type in the env->insn_aux_data[...].ptr_type field
(same way it is done for BPF_STX and BPF_LDX instructions).
- verifier.c:convert_ctx_access() and various callbacks invoked by
it are updated to handled BPF_ST instruction alongside BPF_STX.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
bpf_rcu_read_lock/unlock() are only available in clang compiled kernels. Lack
of such key mechanism makes it impossible for sleepable bpf programs to use RCU
pointers.
Allow bpf_rcu_read_lock/unlock() in GCC compiled kernels (though GCC doesn't
support btf_type_tag yet) and allowlist certain field dereferences in important
data structures like tast_struct, cgroup, socket that are used by sleepable
programs either as RCU pointer or full trusted pointer (which is valid outside
of RCU CS). Use BTF_TYPE_SAFE_RCU and BTF_TYPE_SAFE_TRUSTED macros for such
tagging. They will be removed once GCC supports btf_type_tag.
With that refactor check_ptr_to_btf_access(). Make it strict in enforcing
PTR_TRUSTED and PTR_UNTRUSTED while deprecating old PTR_TO_BTF_ID without
modifier flags. There is a chance that this strict enforcement might break
existing programs (especially on GCC compiled kernels), but this cleanup has to
start sooner than later. Note PTR_TO_CTX access still yields old deprecated
PTR_TO_BTF_ID. Once it's converted to strict PTR_TRUSTED or PTR_UNTRUSTED the
kfuncs and helpers will be able to default to KF_TRUSTED_ARGS. KF_RCU will
remain as a weaker version of KF_TRUSTED_ARGS where obj refcnt could be 0.
Adjust rcu_read_lock selftest to run on gcc and clang compiled kernels.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adjust cgroup kfunc test to dereference RCU protected cgroup pointer
as PTR_TRUSTED and pass into KF_TRUSTED_ARGS kfunc.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Tweak existing map_kptr test to check kptr_rcu.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The life time of certain kernel structures like 'struct cgroup' is protected by RCU.
Hence it's safe to dereference them directly from __kptr tagged pointers in bpf maps.
The resulting pointer is MEM_RCU and can be passed to kfuncs that expect KF_RCU.
Derefrence of other kptr-s returns PTR_UNTRUSTED.
For example:
struct map_value {
struct cgroup __kptr *cgrp;
};
SEC("tp_btf/cgroup_mkdir")
int BPF_PROG(test_cgrp_get_ancestors, struct cgroup *cgrp_arg, const char *path)
{
struct cgroup *cg, *cg2;
cg = bpf_cgroup_acquire(cgrp_arg); // cg is PTR_TRUSTED and ref_obj_id > 0
bpf_kptr_xchg(&v->cgrp, cg);
cg2 = v->cgrp; // This is new feature introduced by this patch.
// cg2 is PTR_MAYBE_NULL | MEM_RCU.
// When cg2 != NULL, it's a valid cgroup, but its percpu_ref could be zero
if (cg2)
bpf_cgroup_ancestor(cg2, level); // safe to do.
}
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
__kptr meant to store PTR_UNTRUSTED kernel pointers inside bpf maps.
The concept felt useful, but didn't get much traction,
since bpf_rdonly_cast() was added soon after and bpf programs received
a simpler way to access PTR_UNTRUSTED kernel pointers
without going through restrictive __kptr usage.
Rename __kptr_ref -> __kptr and __kptr -> __kptr_untrusted to indicate
its intended usage.
The main goal of __kptr_untrusted was to read/write such pointers
directly while bpf_kptr_xchg was a mechanism to access refcnted
kernel pointers. The next patch will allow RCU protected __kptr access
with direct read. At that point __kptr_untrusted will be deprecated.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test for the absolute BPF timer under the existing timer tests. This
will run the timer two times with 1us expiration time, and then re-arm
the timer at ~35s in the future. At the end, it is verified that the
absolute timer expired exactly two times.
Signed-off-by: Tero Kristo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Per C99 standard [0], Section 6.7.8, Paragraph 10:
If an object that has automatic storage duration is not initialized
explicitly, its value is indeterminate.
And in the same document, in appendix "J.2 Undefined behavior":
The behavior is undefined in the following circumstances:
[...]
The value of an object with automatic storage duration is used while
it is indeterminate (6.2.4, 6.7.8, 6.8).
This means that use of an uninitialized stack variable is undefined
behavior, and therefore that clang can choose to do a variety of scary
things, such as not generating bytecode for "bunch of useful code" in
the below example:
void some_func()
{
int i;
if (!i)
return;
// bunch of useful code
}
To add insult to injury, if some_func above is a helper function for
some BPF program, clang can choose to not generate an "exit" insn,
causing verifier to fail with "last insn is not an exit or jmp". Going
from that verification failure to the root cause of uninitialized use
is certain to be frustrating.
This patch adds -Wuninitialized to the cflags for selftest BPF progs and
fixes up existing instances of uninitialized use.
[0]: https://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf
Signed-off-by: Dave Marchevsky <[email protected]>
Cc: David Vernet <[email protected]>
Cc: Tejun Heo <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Extend __flag attribute by allowing to specify one of the following:
* BPF_F_STRICT_ALIGNMENT
* BPF_F_ANY_ALIGNMENT
* BPF_F_TEST_RND_HI32
* BPF_F_TEST_STATE_FREQ
* BPF_F_SLEEPABLE
* BPF_F_XDP_HAS_FRAGS
* Some numeric value
Extend __msg attribute by allowing to specify multiple exepcted messages.
All messages are expected to be present in the verifier log in the
order of application.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
[ Eduard: added commit message, formatting, comments ]
|
|
If target is bpf, there is no __loongarch__ definition, __BITS_PER_LONG
defaults to 32, __NR_nanosleep is not defined:
#if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32
#define __NR_nanosleep 101
__SC_3264(__NR_nanosleep, sys_nanosleep_time32, sys_nanosleep)
#endif
Work around this problem, by explicitly setting __BITS_PER_LONG to
__loongarch_grlen which is defined by compiler as 64 for LA64.
This is similar with commit 36e70b9b06bf ("selftests, bpf: Fix broken
riscv build").
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Firstly, ensure programs successfully load when using all of the
supported maps. Then, extend existing tests to test more cases at
runtime. We are currently testing both the synchronous freeing of items
and asynchronous destruction when map is freed, but the code needs to be
adjusted a bit to be able to also accomodate support for percpu maps.
We now do a delete on the item (and update for array maps which has a
similar effect for kptrs) to perform a synchronous free of the kptr, and
test destruction both for the synchronous and asynchronous deletion.
Next time the program runs, it should observe the refcount as 1 since
all existing references should have been released by then. By running
the program after both possible paths freeing kptrs, we establish that
they correctly release resources. Next, we augment the existing test to
also test the same code path shared by all local storage maps using a
task local storage map.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test skb and xdp dynptr functionality in the following ways:
1) progs/test_cls_redirect_dynptr.c
* Rewrite "progs/test_cls_redirect.c" test to use dynptrs to parse
skb data
* This is a great example of how dynptrs can be used to simplify a
lot of the parsing logic for non-statically known values.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t cls_redirect"):
original version: 0.092 sec
with dynptrs: 0.078 sec
2) progs/test_xdp_dynptr.c
* Rewrite "progs/test_xdp.c" test to use dynptrs to parse xdp data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t xdp_attach"):
original version: 0.118 sec
with dynptrs: 0.094 sec
3) progs/test_l4lb_noinline_dynptr.c
* Rewrite "progs/test_l4lb_noinline.c" test to use dynptrs to parse
skb data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t l4lb_all"):
original version: 0.062 sec
with dynptrs: 0.081 sec
For number of processed verifier instructions:
original version: 6268 insns
with dynptrs: 2588 insns
4) progs/test_parse_tcp_hdr_opt_dynptr.c
* Add sample code for parsing tcp hdr opt lookup using dynptrs.
This logic is lifted from a real-world use case of packet parsing
in katran [0], a layer 4 load balancer. The original version
"progs/test_parse_tcp_hdr_opt.c" (not using dynptrs) is included
here as well, for comparison.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t parse_tcp_hdr_opt"):
original version: 0.031 sec
with dynptrs: 0.045 sec
5) progs/dynptr_success.c
* Add test case "test_skb_readonly" for testing attempts at writes
on a prog type with read-only skb ctx.
* Add "test_dynptr_skb_data" for testing that bpf_dynptr_data isn't
supported for skb progs.
6) progs/dynptr_fail.c
* Add test cases "skb_invalid_data_slice{1,2,3,4}" and
"xdp_invalid_data_slice{1,2}" for testing that helpers that modify the
underlying packet buffer automatically invalidate the associated
data slice.
* Add test cases "skb_invalid_ctx" and "xdp_invalid_ctx" for testing
that prog types that do not support bpf_dynptr_from_skb/xdp don't
have access to the API.
* Add test case "dynptr_slice_var_len{1,2}" for testing that
variable-sized len can't be passed in to bpf_dynptr_slice
* Add test case "skb_invalid_slice_write" for testing that writes to a
read-only data slice are rejected by the verifier.
* Add test case "data_slice_out_of_bounds_skb" for testing that
writes to an area outside the slice are rejected.
* Add test case "invalid_slice_rdwr_rdonly" for testing that prog
types that don't allow writes to packet data don't accept any calls
to bpf_dynptr_slice_rdwr.
[0] https://github.com/facebookincubator/katran/blob/main/katran/lib/bpf/pckt_parsing.h
Signed-off-by: Joanne Koong <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words. It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.
That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more. And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation. It's a lose-lose
situation.
So just change the 'u32[2]' into a 'u64' and be done with it.
We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).
So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.
This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently. By just using a saner data structure, it went from
unsigned __capi;
CAP_FOR_EACH_U32(__capi) {
if (a.cap[__capi] != b.cap[__capi])
return false;
}
return true;
to just being
return a.val == b.val;
instead. Which is rather more obvious both to humans and to compilers.
Cc: Mateusz Guzik <[email protected]>
Cc: Casey Schaufler <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Paul Moore <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Make -mstrict-align configurable
- Add kernel relocation and KASLR support
- Add single kernel image implementation for kdump
- Add hardware breakpoints/watchpoints support
- Add kprobes/kretprobes/kprobes_on_ftrace support
- Add LoongArch support for some selftests.
* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
selftests/ftrace: Add LoongArch kprobe args string tests support
selftests/seccomp: Add LoongArch selftesting support
tools: Add LoongArch build infrastructure
samples/kprobes: Add LoongArch support
LoongArch: Mark some assembler symbols as non-kprobe-able
LoongArch: Add kprobes on ftrace support
LoongArch: Add kretprobes support
LoongArch: Add kprobes support
LoongArch: Simulate branch and PC* instructions
LoongArch: ptrace: Add hardware single step support
LoongArch: ptrace: Add function argument access API
LoongArch: ptrace: Expose hardware breakpoints to debuggers
LoongArch: Add hardware breakpoints/watchpoints support
LoongArch: kdump: Add crashkernel=YM handling
LoongArch: kdump: Add single kernel image implementation
LoongArch: Add support for kernel address space layout randomization (KASLR)
LoongArch: Add support for kernel relocation
LoongArch: Add la_abs macro implementation
LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
...
|
|
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes: 282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
|
|
Commit bc292ab00f6c("mm: introduce vma->vm_flags wrapper functions")
turns the vm_flags into a const variable.
Added bpf_find_vma test in commit f108662b27c9("selftests/bpf: Add tests
for bpf_find_vma") to assign values to variables that declare const in
find_vma_fail1.c programs, which is an error to the compiler and does not
test BPF verifiers. It is better to replace 'const vm_flags_t vm_flags'
with 'unsigned long vm_start' for testing.
$ make -C tools/testing/selftests/bpf/ -j8
...
progs/find_vma_fail1.c:16:16: error: cannot assign to non-static data
member 'vm_flags' with const-qualified type 'const vm_flags_t' (aka
'const unsigned long')
vma->vm_flags |= 0x55;
~~~~~~~~~~~~~ ^
../tools/testing/selftests/bpf/tools/include/vmlinux.h:1898:20:
note: non-static data member 'vm_flags' declared const here
const vm_flags_t vm_flags;
~~~~~~~~~~~`~~~~~~^~~~~~~~
Signed-off-by: Rong Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
After commit 80d7da1cac62 ("asm-generic: Drop getrlimit and setrlimit
syscalls from default list"), new architectures won't need to include
getrlimit and setrlimit, they are superseded with prlimit64.
In order to maintain compatibility for the new architectures, such as
LoongArch which does not define __NR_getrlimit, it is better to use
__NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test to fix
the following build error:
TEST-OBJ [test_progs] user_ringbuf.test.o
tools/testing/selftests/bpf/prog_tests/user_ringbuf.c: In function 'kick_kernel_cb':
tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: error: '__NR_getrlimit' undeclared (first use in this function)
593 | syscall(__NR_getrlimit);
| ^~~~~~~~~~~~~~
tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: note: each undeclared identifier is reported only once for each function it appears in
make: *** [Makefile:573: tools/testing/selftests/bpf/user_ringbuf.test.o] Error 1
make: Leaving directory 'tools/testing/selftests/bpf'
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
|
|
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
|
Before:
[5] Kprobe event string type argument [UNTESTED]
[7] Kprobe event argument syntax [UNTESTED]
After:
[5] Kprobe event string type argument [PASS]
[7] Kprobe event argument syntax [PASS]
Signed-off-by: Qing Zhang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
BPF for LoongArch is supported now, add the selftesting support in
seccomp_bpf.c.
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
The current mptcp test is run in init netns. If the user or default
system config disabled mptcp, the test will fail. Let's run the mptcp
test in a dedicated netns to avoid none kernel default mptcp setting.
Suggested-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Matthieu Baerts <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
A lot of tests defined SYS() macro to run system calls with goto label.
Let's move this macro to test_progs.h and add configurable
"goto_label" as the first arg.
Suggested-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|