| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Clang noticed that some none-zero sleep()s were actually using zero
anyway. This switches to nanosleep() to gain sub-second granularity.
seccomp_bpf.c:2625:9: warning: implicit conversion from 'double' to
'unsigned int' changes value from 0.1 to 0 [-Wliteral-conversion]
sleep(0.1);
~~~~~ ^~~
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The harness was still using old-style GNU named initializer syntax.
Fix this so Clang will stop warning:
seccomp_bpf.c:2924:1: warning: use of GNU old-style field designator extension
[-Wgnu-designator]
./../kselftest_harness.h:147:25: note: expanded from macro 'TEST'
^
./../kselftest_harness.h:172:5: note: expanded from macro '__TEST_IMPL'
fn: &test_name, termsig: _signal }; \
^
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The pid ns cannot be unshare()d as an unprivileged user without owning the
userns as well. Let's unshare the userns so that we can subsequently
unshare the pidns.
This also means that we don't need to set the no new privs bit as in the
other test cases, since we're unsharing the userns.
Signed-off-by: Tycho Andersen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
seccomp() doesn't allow users who aren't root in their userns to attach
filters unless they have the nnp bit set, so let's set it so that these
tests can pass when run as an unprivileged user.
This idea stolen from the other seccomp tests, which use this trick :)
Signed-off-by: Tycho Andersen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The get_metadata() test requires real root, so let's skip it if we're not
real root.
Note that I used XFAIL here because that's what the test does later if
CONFIG_CHEKCKPOINT_RESTORE happens to not be enabled. After looking at the
code, there doesn't seem to be a nice way to skip tests defined as TEST(),
since there's no return code (I tried exit(KSFT_SKIP), but that didn't work
either...). So let's do it this way to be consistent, and easier to fix
when someone comes along and fixes it.
Signed-off-by: Tycho Andersen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
While playing around with a way to skip the seccomp get_metadata test, I
noticed that this header uses printf() without defining it, leading to,
../kselftest.h: In function ‘ksft_print_header’:
../kselftest.h:61:3: warning: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
printf("TAP version 13\n");
^~~~~~
../kselftest.h:61:3: warning: incompatible implicit declaration of built-in function ‘printf’
../kselftest.h:61:3: note: include ‘<stdio.h>’ or provide a declaration of ‘printf’
if user code doesn't also use printf.
Signed-off-by: Tycho Andersen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
There used to be an explanation here because it could trigger lockdep
previously, but now we're not doing recursive locking, so it really is just
for grins.
Signed-off-by: Tycho Andersen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This this test forks a child, and then the parent waits for a write() to a
pipe signalling the child is ready to be attached to. If something in the
child ASSERTs before it does this write, the test will hang waiting for it.
Instead, let's EXPECT, so that execution continues until we do the write.
Any failure after that is fine and can ASSERT.
Signed-off-by: Tycho Andersen <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the latest RCU tree from Paul E. McKenney:
- Additional cleanups after RCU flavor consolidation
- Grace-period forward-progress cleanups and improvements
- Documentation updates
- Miscellaneous fixes
- spin_is_locked() conversions to lockdep
- SPDX changes to RCU source and header files
- SRCU updates
- Torture-test updates, including nolibc updates and moving
nolibc to tools/include
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This patch adds a selftest for the SafeSetID LSM. The test requires
mounting securityfs if it isn't mounted, creating test users in
/etc/passwd, and configuring policies for the SafeSetID LSM through
writes to securityfs.
Signed-off-by: Micah Morton <[email protected]>
Signed-off-by: James Morris <[email protected]>
|
|
Don't source lib.sh 2 times and make the script work with ifnames
passed on the command line.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This adds a test for the previous bug.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The livepatch selftest functions.sh library uses "$*" and an
intermediate variable to extract and then pass arguments from function
to function call. The effect of this combination is that the argument
list is flattened into a single argument. Sometimes this is benign, but
in cases like __load_mod(), the modprobe invocation will interpret all
the module parameters as a single parameter.
Drop the intermediate variable and use the "$@" special parameter as
described in the bash manual.
Link: https://www.gnu.org/software/bash/manual/bash.html#Special-Parameters
Signed-off-by: Joe Lawrence <[email protected]>
Reviewed-by: Kamalesh Babulal <[email protected]>
Acked-by: Miroslav Benes <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
|
|
Sub-register mode compilation was enabled only when there are eBPF "v3"
processor supports at both compilation time inside LLVM and runtime inside
kernel.
Given separation betwen build and test server could be often, this patch
removes the runtime support criteria.
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
At the moment, all kernel bpf objects are listed under BPF_OBJ_FILES.
Listing them manually sometimes causing patch conflict when people are
adding new testcases simultaneously.
It is better to centre all the related source files under a subdir
"progs", then auto-generate the object file list.
Suggested-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
At the moment, we only do extra sub-register mode compilation on bpf object
files used by "test_progs". These object files are really loaded and
executed.
This patch further extends sub-register mode compilation to all bpf object
files, even those without corresponding runtime tests. Because this could
help testing LLVM sub-register code-gen, kernel bpf selftest has much more
C testcases with reasonable size and complexity compared with LLVM
testsuite which only contains unit tests.
There were some file duplication inside BPF_OBJ_FILES_DUAL_COMPILE which
is removed now.
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
"alu32" is a build dir and contains various files for BPF sub-register
code-gen testing.
This patch tells git to ignore it.
Suggested-by: Yonghong Song <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We need the debugfs fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch adds a C program to show the usage on
skb->sk and bpf_tcp_sock.
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch tests accessing the skb->sk and the new helpers,
bpf_sk_fullsock and bpf_tcp_sock.
The errstr of some existing "reference tracking" tests is changed
with s/bpf_sock/sock/ and s/socket/sock/ where "sock" is from the
verifier's reg_type_str[].
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Track the basic codepaths of delta rehash handling,
using mlxsw tracepoints.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <[email protected]>
|
|
Added the tests that I've been using for testing TPM 2.0 functionality
for a long time but have been out-of-tree so far, residing in
https://github.com/jsakkine-intel/tpm2-scripts
Cc: Tadeusz Struk <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Acked-by: Joey Pabalinas <[email protected]>
Reviewed-by: Petr Vorel <[email protected]>
|
|
Now that we have btf__get_raw_data() it's trivial for tests to iterate
over all strings for testing purposes, which eliminates the need for
btf__get_strings() API.
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Pull networking fixes from David Miller:
"This pull request is dedicated to the upcoming snowpocalypse parts 2
and 3 in the Pacific Northwest:
1) Drop profiles are broken because some drivers use dev_kfree_skb*
instead of dev_consume_skb*, from Yang Wei.
2) Fix IWLWIFI kconfig deps, from Luca Coelho.
3) Fix percpu maps updating in bpftool, from Paolo Abeni.
4) Missing station release in batman-adv, from Felix Fietkau.
5) Fix some networking compat ioctl bugs, from Johannes Berg.
6) ucc_geth must reset the BQL queue state when stopping the device,
from Mathias Thore.
7) Several XDP bug fixes in virtio_net from Toshiaki Makita.
8) TSO packets must be sent always on queue 0 in stmmac, from Jose
Abreu.
9) Fix socket refcounting bug in RDS, from Eric Dumazet.
10) Handle sparse cpu allocations in bpf selftests, from Martynas
Pumputis.
11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
Feitkau.
12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
Greg Kroah-Hartman.
13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
ccid, from Eric Dumazet.
14) Need to reload WoL password into bcmsysport device after deep
sleeps, from Florian Fainelli.
15) Remove filter from mask before freeing in cls_flower, from Petr
Machata.
16) Missing release and use after free in error paths of s390 qeth
code, from Julian Wiedmann.
17) Fix lockdep false positive in dsa code, from Marc Zyngier.
18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.
19) Fix EQ firmware assert in qed driver, from Manish Chopra.
20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net: dsa: b53: Fix for failure when irq is not defined in dt
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
net: Don't default Cavium PTP driver to 'y'
net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net/mlx5e: Don't overwrite pedit action when multiple pedit used
net/mlx5e: Update hw flows when encap source mac changed
qed*: Advance drivers version to 8.37.0.20
qed: Change verbosity for coalescing message.
qede: Fix system crash on configuring channels.
qed: Consider TX tcs while deriving the max num_queues for PF.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.0-rc6.
Nothing huge here, some more binderfs fixups found as people use it,
and there is a "large" selftest added to validate the binderfs code,
which makes up the majority of this pull request.
There's also some small mei and mic fixes to resolve some reported
issues.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mic: vop: Fix crash on remove
mic: vop: Fix use-after-free on remove
binderfs: remove separate device_initcall()
fpga: stratix10-soc: fix wrong of_node_put() in init function
mic: vop: Fix broken virtqueues
mei: free read cb on ctrl_wr list flush
samples: mei: use /dev/mei0 instead of /dev/mei
mei: me: add ice lake point device id.
binderfs: respect limit on binder control creation
binder: fix CONFIG_ANDROID_BINDER_DEVICES
selftests: add binderfs selftests
|
|
commit a6a9be9270c87 ("selftests: firmware: return Kselftest Skip code
for skipped tests") by Shuah modified failures to return the special
error code of $ksft_skip (4). We have a corner case issue where we
*do* want to verify_reqs().
Cc: <[email protected]> # >= 4.18
Fixes: a6a9be9270c87 ("selftests: firmware: return Kselftest Skip code for for skipped tests")
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit f70b472e937bb659a7b7a14e64f07308e230888c.
This breaks testing on Debian, and this patch was NACKed anyway.
The proper way to address this is a quirk for busybox as that is
where the issue is present.
Signed-off-by: Luis Chamberlain <[email protected]>
Fixes: f70b472e937b ("selftests: firmware: remove use of non-standard diff -Z option")
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
config"
This reverts commit 7492902e8d22b568463897fa967c0886764cf034.
The commit tried to address an issue discovered by Dan where he got
a message saying:
'usermode helper disabled so ignoring test'.
Dans's commit is forcing CONFIG_FW_LOADER_USER_HELPER_FALLBACK but just
having CONFIG_FW_LOADER_USER_HELPER suffices to emulate the_FALLBACK
functionality.
Dan's commit is trying to fix an issue which is hidden from a previous
commit. That issue will be addressed properly next.
Fixes: 7492902e8d22 ("selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config")
Cc: stable <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The kernel verifier has three levels of logs:
0: no logs
1: logs mostly useful
> 1: verbose
Current libbpf API functions bpf_load_program_xattr() and
bpf_load_program() cannot specify log_level.
The bcc, however, provides an interface for user to
specify log_level 2 for verbose output.
This patch added log_level into structure
bpf_load_program_attr, so users, including bcc, can use
bpf_load_program_xattr() to change log_level. The
supported log_level is 0, 1, and 2.
The bpf selftest test_sock.c is modified to enable log_level = 2.
If the "verbose" in test_sock.c is changed to true,
the test will output logs like below:
$ ./test_sock
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
0: (bf) r6 = r1
1: R1=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
1: (61) r7 = *(u32 *)(r6 +28)
invalid bpf_context access off=28 size=4
Test case: bind4 load with invalid access: src_ip6 .. [PASS]
...
Test case: bind6 allow all .. [PASS]
Summary: 16 PASSED, 0 FAILED
Some test_sock tests are negative tests and verbose verifier
log will be printed out as shown in the above.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-02-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a riscv64 JIT for BPF, from Björn.
2) Implement BTF deduplication algorithm for libbpf which takes BTF type
information containing duplicate per-compilation unit information and
reduces it to an equivalent set of BTF types with no duplication and
without loss of information, from Andrii.
3) Offloaded and native BPF XDP programs can coexist today, enable also
offloaded and generic ones as well, from Jakub.
4) Expose various BTF related helper functions in libbpf as API which
are in particular helpful for JITed programs, from Yonghong.
5) Fix the recently added JMP32 code emission in s390x JIT, from Heiko.
6) Fix BPF kselftests' tcp_{server,client}.py to be able to run inside
a network namespace, also add a fix for libbpf to get libbpf_print()
working, from Stanislav.
7) Fixes for bpftool documentation, from Prashant.
8) Type cleanup in BPF kselftests' test_maps.c to silence a gcc8 warning,
from Breno.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Use a simple topology consisting of two hosts directly connected to a
router. Make sure IPv4/IPv6 ping works and then add blackhole routes.
Test that ping fails and that the routes are marked as offloaded. Use a
simple tc filter to test that packets were dropped by the ASIC and not
trapped to the CPU.
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When compiling test_maps selftest with GCC-8, it warns that an array
might be indexed with a negative value, which could cause a negative
out of bound access, depending on parameters of the function. This
is the GCC-8 warning:
gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include test_maps.c /home/breno/Devel/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /home/breno/Devel/linux/tools/testing/selftests/bpf/test_maps
In file included from test_maps.c:16:
test_maps.c: In function ‘run_all_tests’:
test_maps.c:1079:10: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds]
assert(waitpid(pid[i], &status, 0) == pid[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
test_maps.c:1059:6: warning: array subscript -1 is below array bounds of ‘pid_t[<Ube20> + 1]’ [-Warray-bounds]
pid[i] = fork();
~~~^~~
This patch simply guarantees that the task(s) variables are unsigned,
thus, they could never be a negative number (which they are not in
current code anyway), hence avoiding an out of bound access warning.
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Test adding the offloaded program after the other program
is already installed.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add simple sanity check for enabling generic and offload
XDP, simply reuse the native and offload checks.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Figuring out which exact check in test_offload.py takes more
time than it should. Print the traceback (to the screen and
the logs).
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Recent changes added extack to program replacement path,
expect extack instead of generic messages.
Fixes: 01dde20ce04b ("xdp: Provide extack messages when prog attachment failed")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Commit 9c651127445c ("selftests/btf: add initial BTF dedup tests")
added dedup tests in test_btf.c.
It broke the raw test:
BTF raw test[71] (func proto (Bad arg name_off)):
btf_raw_create:2905:FAIL Error getting string #65535, strs_cnt:1
The test itself encodes invalid func_proto parameter name
offset 0xffffFFFF as a negative test for the kernel.
The above commit changed the meaning of that offset and
resulted in a user space error.
#define NAME_NTH(N) (0xffff0000 | N)
#define IS_NAME_NTH(X) ((X & 0xffff0000) == 0xffff0000)
#define GET_NAME_NTH_IDX(X) (X & 0x0000ffff)
Currently, the kernel permits maximum name offset 0xffff.
Set the test name off as 0x0fffFFFF to trigger the kernel
verification failure.
Cc: Andrii Nakryiko <[email protected]>
Fixes: 9c651127445c ("selftests/btf: add initial BTF dedup tests")
Signed-off-by: Yonghong Song <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
With the recent print rework we now have the following problem:
pr_{warning,info,debug} expand to __pr which calls libbpf_print.
libbpf_print does va_start and calls __libbpf_pr with va_list argument.
In __base_pr we again do va_start. Because the next argument is a
va_list, we don't get correct pointer to the argument (and print noting
in my case, I don't know why it doesn't crash tbh).
Fix this by changing libbpf_print_fn_t signature to accept va_list and
remove unneeded calls to va_start in the existing users.
Alternatively, this can we solved by exporting __libbpf_pr and
changing __pr macro to (and killing libbpf_print):
{
if (__libbpf_pr)
__libbpf_pr(level, "libbpf: " fmt, ##__VA_ARGS__)
}
Signed-off-by: Stanislav Fomichev <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Bind and connect to localhost. There is no reason for this test to
use non-localhost interface. This lets us run this test in a network
namespace.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Currently, the libbpf API function libbpf_set_print()
takes three function pointer parameters for warning, info
and debug printout respectively.
This patch changes the API to have just one function pointer
parameter and the function pointer has one additional
parameter "debugging level". So if in the future, if
the debug level is increased, the function signature
won't change.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Check basic nat/redirect/masquerade for ipv4 and ipv6.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y
Signed-off-by: Naresh Kamboju <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Compiling rxtimestamp.c generates error messages due to
non-existing declaration for write() library call.
Add missing unistd.h include to provide the declaration and
silence the error.
Signed-off-by: Deepa Dinamani <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-02-01
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) introduce bpf_spin_lock, from Alexei.
2) convert xdp samples to libbpf, from Maciej.
3) skip verifier tests for unsupported program/map types, from Stanislav.
4) powerpc64 JIT support for BTF line info, from Sandipan.
5) assorted fixed, from Valdis, Jesper, Jiong.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
'make clean' is supposed to remove generated files.
Signed-off-by: Stanislav Fomichev <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
/proc entries under /proc/net/* can't be cached into dcache because
setns(2) can change current net namespace.
[[email protected]: coding-style fixes]
[[email protected]: avoid vim miscolorization]
[[email protected]: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time]
Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2
Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2
Fixes: 1da4d377f943fe4194ffb9fb9c26cc58fad4dd24 ("proc: revalidate misc dentries")
Signed-off-by: Alexey Dobriyan <[email protected]>
Reported-by: Mateusz Stępień <[email protected]>
Reported-by: Ahmad Fatoum <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-01-31
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) disable preemption in sender side of socket filters, from Alexei.
2) fix two potential deadlocks in syscall bpf lookup and prog_register,
from Martin and Alexei.
3) fix BTF to allow typedef on func_proto, from Yonghong.
4) two bpftool fixes, from Jiri and Paolo.
====================
Signed-off-by: David S. Miller <[email protected]>
|