aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-09-29Merge tag 'net-6.0-rc8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wifi and can. Current release - regressions: - phy: don't WARN for PHY_UP state in mdio_bus_phy_resume() - wifi: fix locking in mac80211 mlme - eth: - revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()" - mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe Previous releases - regressions: - wifi: fix regression with non-QoS drivers Previous releases - always broken: - mptcp: fix unreleased socket in accept queue - wifi: - don't start TX with fq->lock to fix deadlock - fix memory corruption in minstrel_ht_update_rates() - eth: - macb: fix ZynqMP SGMII non-wakeup source resume failure - mt7531: only do PLL once after the reset - usbnet: fix memory leak in usbnet_disconnect() Misc: - usb: qmi_wwan: add new usb-id for Dell branded EM7455" * tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits) mptcp: fix unreleased socket in accept queue mptcp: factor out __mptcp_close() without socket lock net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2} net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge can: c_can: don't cache TX messages for C_CAN cores ice: xsk: drop power of 2 ring size restriction for AF_XDP ice: xsk: change batched Tx descriptor cleaning net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455 selftests: Fix the if conditions of in test_extra_filter() net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume() net: stmmac: power up/down serdes in stmmac_open/release wifi: mac80211: mlme: Fix double unlock on assoc success handling wifi: mac80211: mlme: Fix missing unlock on beacon RX wifi: mac80211: fix memory corruption in minstrel_ht_update_rates() wifi: mac80211: fix regression with non-QoS drivers wifi: mac80211: ensure vif queues are operational after start wifi: mac80211: don't start TX with fq->lock to fix deadlock wifi: cfg80211: fix MCS divisor value net: hippi: Add missing pci_disable_device() in rr_init_one() net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe ...
2022-09-29tracing/user_events: Use bits vs bytes for enabled status page dataBeau Belgrave2-11/+47
User processes may require many events and when they do the cache performance of a byte index status check is less ideal than a bit index. The previous event limit per-page was 4096, the new limit is 32,768. This change adds a bitwise index to the user_reg struct. Programs check that the bit at status_bit has a bit set within the status page(s). Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Suggested-by: Mathieu Desnoyers <[email protected]> Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-09-29KVM: selftests: dirty-log: Use KVM_CAP_DIRTY_LOG_RING_ACQ_REL if availableMarc Zyngier2-2/+6
Pick KVM_CAP_DIRTY_LOG_RING_ACQ_REL if exposed by the kernel. Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Reviewed-by: Peter Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-29KVM: selftests: dirty-log: Upgrade flag accesses to acquire/release semanticsMarc Zyngier1-2/+3
In order to preserve ordering, make sure that the flag accesses in the dirty log are done using acquire/release accessors. Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Reviewed-by: Peter Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-28selftests/bpf: Convert udp_limit test to ASSERT_* macrosWang Yufen1-11/+7
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert tcpbpf_user test to ASSERT_* macrosWang Yufen1-20/+12
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert tcp_rtt test to ASSERT_* macrosWang Yufen1-8/+5
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macrosWang Yufen1-52/+28
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert tcp_estats test to ASSERT_* macrosWang Yufen1-3/+1
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert sockopt_sk test to ASSERT_* macrosWang Yufen1-1/+1
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert sockopt_multi test to ASSERT_* macrosWang Yufen1-5/+5
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert sockopt_inherit test to ASSERT_* macrosWang Yufen1-17/+13
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert sockopt test to ASSERT_* macrosWang Yufen1-2/+2
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert sockmap_ktls test to ASSERT_* macrosWang Yufen1-29/+10
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Convert sockmap_basic test to ASSERT_* macrosWang Yufen1-54/+33
Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK(). Signed-off-by: Wang Yufen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28selftests/bpf: Test parameterized task BPF iterators.Kui-Feng Lee6-24/+322
Test iterators of vma, files and tasks. Ensure the API works appropriately to visit all tasks, tasks in a process, or a particular task. Signed-off-by: Kui-Feng Lee <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-28KVM: selftests: Don't set reserved bits for invalid Hyper-V hypercall numberVitaly Kuznetsov1-1/+1
Bits 27 through 31 in Hyper-V hypercall 'control' are reserved (see HV_HYPERCALL_RSVD0_MASK) but '0xdeadbeef' includes them. This causes KVM to return HV_STATUS_INVALID_HYPERCALL_INPUT instead of the expected HV_STATUS_INVALID_HYPERCALL_CODE. Signed-off-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2022-09-28KVM: selftests: Load RAX with -EFAULT before Hyper-V hypercallVipin Sharma1-1/+2
Load RAX with -EFAULT prior to making a Hyper-V hypercall so that tests can't get false negatives due to the compiler coincidentally loading the "right" value into RAX, i.e. to ensure that _KVM_ and not the compiler is correctly clearing RAX on a successful hypercall. Note, initializing *hv_status (in C code) to -EFAULT is not sufficient to avoid false negatives, as the compiler can still "clobber" RAX and thus load garbage into *hv_status if the hypercall faults (or if KVM doesn't set RAX). Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Vipin Sharma <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/r/[email protected] [sean: move to separate patch, massage changelog] Signed-off-by: Sean Christopherson <[email protected]>
2022-09-28KVM: selftests: Check result in hyperv_features for successful hypercallsVipin Sharma1-4/+4
Commit cc5851c6be86 ("KVM: selftests: Use exception fixup for #UD/#GP Hyper-V MSR/hcall tests") introduced a wrong guest assert in guest_hcall(). It is not checking the successful hypercall results and only checks the result when a fault happens. GUEST_ASSERT_2(!hcall->ud_expected || res == hcall->expect, hcall->expect, res); Correct the assertion by only checking results of the successful hypercalls. This issue was observed when this test started failing after building it in Clang. Above guest assert statement fails because "res" is not equal to "hcall->expect" when "hcall->ud_expected" is true. "res" gets some garbage value in Clang from the RAX register. In GCC, RAX is 0 because it using RAX for @output_address in the asm statement and resetting it to 0 before using it as output operand in the same asm statement. Clang is not using RAX for @output_address. Fixes: cc5851c6be86 ("KVM: selftests: Use exception fixup for #UD/#GP Hyper-V MSR/hcall tests") Signed-off-by: Vipin Sharma <[email protected]> Suggested-by: Sean Christopherson <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Link: https://lore.kernel.org/r/[email protected] [sean: wrap changelog at ~75 chars, move -EFAULT change to separate patch] Signed-off-by: Sean Christopherson <[email protected]>
2022-09-28KVM: selftests: Update top-of-file comment in psci_testOliver Upton1-4/+6
Fix the comment to accurately describe the test and recently added SYSTEM_SUSPEND test case. What was once psci_cpu_on_test was renamed and extended to squeeze in a test case for PSCI SYSTEM_SUSPEND. Nonetheless, the author of those changes (whoever they may be...) failed to update the file comment to reflect what had changed. Reported-by: Reiji Watanabe <[email protected]> Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-28selftests/powerpc: Update bhrb filter sampling test for multiple branch filtersAthira Rajeev1-0/+9
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type, ie branch filters are supported. The testcase "bhrb_filter_map_test" tests the valid and invalid filter maps in different powerpc platforms. Update this testcase to include scenario to cover multiple branch filters at sametime. Since powerpc doesn't support multiple filters at sametime, expect failure during perf_event_open. Reported-by: Disha Goel <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-28selftests/tc-testing: add selftests for teql qdiscZhengchao Shao2-0/+98
Test 84a0: Create TEQL with default setting Test 7734: Create TEQL with multiple device Test 34a9: Delete TEQL with valid handle Test 6289: Show TEQL stats Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for tbf qdiscZhengchao Shao2-0/+212
Test 6430: Create TBF with default setting Test 0518: Create TBF with mtu setting Test 320a: Create TBF with peakrate setting Test 239b: Create TBF with latency setting Test c975: Create TBF with overhead setting Test 948c: Create TBF with linklayer setting Test 3549: Replace TBF with mtu Test f948: Change TBF with latency time Test 2348: Show TBF class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for taprio qdiscZhengchao Shao2-0/+136
Test ba39: Add taprio Qdisc to multi-queue device (8 queues) Test 9462: Add taprio Qdisc with multiple sched-entry Test 8d92: Add taprio Qdisc with txtime-delay Test d092: Delete taprio Qdisc with valid handle Test 8471: Show taprio class Test 0a85: Add taprio Qdisc to single-queue device Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for skbprio qdiscZhengchao Shao2-0/+96
Test 283e: Create skbprio with default setting Test c086: Create skbprio with limit setting Test 6733: Change skbprio with limit setting Test 2958: Show skbprio class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for sfq qdiscZhengchao Shao2-0/+233
Test 7482: Create SFQ with default setting Test c186: Create SFQ with limit setting Test ae23: Create SFQ with perturb setting Test a430: Create SFQ with quantum setting Test 4539: Create SFQ with divisor setting Test b089: Create SFQ with flows setting Test 99a0: Create SFQ with depth setting Test 7389: Create SFQ with headdrop setting Test 6472: Create SFQ with redflowlimit setting Test 8929: Show SFQ class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for sfb qdiscZhengchao Shao2-0/+280
Test 3294: Create SFB with default setting Test 430a: Create SFB with rehash setting Test 3410: Create SFB with db setting Test 49a0: Create SFB with limit setting Test 1241: Create SFB with max setting Test 3249: Create SFB with target setting Test 30a9: Create SFB with increment setting Test 239a: Create SFB with decrement setting Test 9301: Create SFB with penalty_rate setting Test 2a01: Create SFB with penalty_burst setting Test 3209: Change SFB with rehash setting Test 5447: Show SFB class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for plug qdiscZhengchao Shao2-0/+189
Test 3289: Create PLUG with default setting Test 0917: Create PLUG with block setting Test 483b: Create PLUG with release setting Test 4995: Create PLUG with release_indefinite setting Test 389c: Create PLUG with limit setting Test 384a: Delete PLUG with valid handle Test 439a: Replace PLUG with limit setting Test 9831: Change PLUG with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for pfifo_fast qdiscZhengchao Shao1-0/+119
Test 900c: Create pfifo_fast with default setting Test 7470: Dump pfifo_fast stats Test b974: Replace pfifo_fast with different handle Test 3240: Delete pfifo_fast with valid handle Test 4385: Delete pfifo_fast with invalid handle Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for hhf qdiscZhengchao Shao2-0/+211
Test 4812: Create HHF with default setting Test 8a92: Create HHF with limit setting Test 3491: Create HHF with quantum setting Test ba04: Create HHF with reset_timeout setting Test 4238: Create HHF with admit_bytes setting Test 839f: Create HHF with evict_timeout setting Test a044: Create HHF with non_hh_weight setting Test 32f9: Change HHF with limit setting Test 385e: Show HHF class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for gred qdiscZhengchao Shao2-0/+165
Test 8942: Create GRED with default setting Test 5783: Create GRED with grio setting Test 8a09: Create GRED with limit setting Test 48cb: Create GRED with ecn setting Test 763a: Change GRED setting Test 8309: Show GRED class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for fq qdiscZhengchao Shao2-0/+396
Test 983b: Create FQ with default setting Test 38a1: Create FQ with limit packet setting Test 0a18: Create FQ with flow_limit setting Test 2390: Create FQ with quantum setting Test 845b: Create FQ with initial_quantum setting Test 9398: Create FQ with maxrate setting Test 342c: Create FQ with nopacing setting Test 6391: Create FQ with refill_delay setting Test 238b: Create FQ with low_rate_threshold setting Test 7582: Create FQ with orphan_mask setting Test 4894: Create FQ with timer_slack setting Test 324c: Create FQ with ce_threshold setting Test 424a: Create FQ with horizon time setting Test 89e1: Create FQ with horizon_cap setting Test 32e1: Delete FQ with valid handle Test 49b0: Replace FQ with limit setting Test 9478: Change FQ with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for etf qdiscZhengchao Shao2-0/+118
Test 34ba: Create ETF with default setting Test 438f: Create ETF with delta nanos setting Test 9041: Create ETF with deadline_mode setting Test 9a0c: Create ETF with skip_sock_check setting Test 2093: Delete ETF with valid handle Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for codel qdiscZhengchao Shao2-0/+212
Test 983a: Create CODEL with default setting Test 38aa: Create CODEL with limit packet setting Test 9178: Create CODEL with target setting Test 78d1: Create CODEL with interval setting Test 238a: Create CODEL with ecn setting Test 939c: Create CODEL with ce_threshold setting Test 8380: Delete CODEL with valid handle Test 289c: Replace CODEL with limit setting Test 0648: Change CODEL with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for choke qdiscZhengchao Shao2-0/+189
Test 8937: Create CHOKE with default setting Test 48c0: Create CHOKE with min packet setting Test 38c1: Create CHOKE with max packet setting Test 234a: Create CHOKE with ecn setting Test 4380: Create CHOKE with burst setting Test 48c7: Delete CHOKE with valid handle Test 4398: Replace CHOKE with min setting Test 0301: Change CHOKE with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for atm qdiscZhengchao Shao2-0/+96
Test 7628: Create ATM with default setting Test 390a: Delete ATM with valid handle Test 32a0: Show ATM class Test 6310: Dump ATM stats Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-27selftests/net: enable io_uring sendzc testingPavel Begunkov1-0/+1
d8b6171bd58a5 ("selftests/io_uring: test zerocopy send") added io_uring zerocopy tests but forgot to enable it in make runs. Add missing io_uring_zerocopy_tx.sh into TEST_PROGS. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/28e743602cdd54ffc49f68bbcbcbafc59ba22dc2.1664142210.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-27selftests/bpf: Fix passing arguments via function in test_kmod.shYauheni Kaliuta1-4/+5
Since the tests are run in a function $@ there actually contains the function arguments, not the script ones. Pass "$@" to the function as well. Fixes: 272d1f4cfa3c ("selftests: bpf: test_kmod.sh: Pass parameters to the module") Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-27KVM: selftests: Skip tests that require EPT when it is not availableDavid Matlack2-0/+21
Skip selftests that require EPT support in the VM when it is not available. For example, if running on a machine where kvm_intel.ept=N since KVM does not offer EPT support to guests if EPT is not supported on the host. This commit causes vmx_dirty_log_test to be skipped instead of failing on hosts where kvm_intel.ept=N. Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-27selftests: Fix the if conditions of in test_extra_filter()Wang Yufen1-1/+1
The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So if bind success or errno != EADDRINUSE, testcase should be failed. Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Signed-off-by: Wang Yufen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-09-26selftests/bpf: Fix get_func_ip offset test for CONFIG_X86_KERNEL_IBTJiri Olsa2-22/+60
With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset won't work because of the extra endbr instruction. As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection and using appropriate offset value based on that. Also removing test7 program, because it does the same as test6. Suggested-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-26bpf: Return value in kprobe get_func_ip only for entry addressJiri Olsa1-2/+2
Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: Martynas Pumputis <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-26bpf: Adjust kprobe_multi entry_ip for CONFIG_X86_KERNEL_IBTJiri Olsa1-3/+1
Martynas reported bpf_get_func_ip returning +4 address when CONFIG_X86_KERNEL_IBT option is enabled. When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction at the function entry, which screws return value of bpf_get_func_ip() helper that should return the function address. There's short term workaround for kprobe_multi bpf program made by Alexei [1], but we need this fixup also for bpf_get_attach_cookie, that returns cookie based on the entry_ip value. Moving the fixup in the fprobe handler, so both bpf_get_func_ip and bpf_get_attach_cookie get expected function address when CONFIG_X86_KERNEL_IBT option is enabled. Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip so it's clearer this is an ftrace __fentry__ ip. [1] commit 7f0059b58f02 ("selftests/bpf: Fix kprobe_multi test.") Cc: Peter Zijlstra <[email protected]> Reported-by: Martynas Pumputis <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-26mm: add merging after mremap resizeJakub Matěna1-1/+48
When mremap call results in expansion, it might be possible to merge the VMA with the next VMA which might become adjacent. This patch adds vma_merge call after the expansion is done to try and merge. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Jakub Matěna <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Peter Zijlstra (Intel) <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Steven Rostedt <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26lib/test_maple_tree: add testing for maple treeLiam R. Howlett1-2/+7
This is a test suite that uses the radix test infrastructure. It has been split into its own commit to allow for easier review of the maple tree code. The testing includes: - Allocation of nodes - gfp flag allocation checks - Expansion & contraction of tree - preallocation checks - tree navigation by next/prev - tree navigation by iterators (mas_for_each, etc) - Number of nodes for a given number of entries - Generic tree construction tests - Addition and removal of entries in forward and reverse numerical indexes - gap searching both forward and reverse - Combining gaps by overwriting entries in different ways - splitting right-most node - splitting left-most node - overwriting multiple slots - overwriting across different levels of the tree - overwriting the middle of a tree - causing a 3-way split up to the root by overwriting the last slot and first slot of different nodes and spanning different levels - RCU stress testing of the tree with threads - Duplication of the tree by entry count - Tests which were generated by fuzzers have been added. - A large number of tests which come from recording crashing in a VM and reconstructing the tree (see check_erase2_set()) Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add lockdep_is_held to headerLiam R. Howlett1-0/+2
maple tree uses lockdep_is_held, so define it as external in the header. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add support for slab bulk APIsLiam R. Howlett1-2/+116
Add support for kmem_cache_free_bulk() and kmem_cache_alloc_bulk() to the radix tree test suite. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add allocation counts and size to kmem_cacheLiam R. Howlett1-1/+27
Add functions to get the number of allocations, and total allocations from a kmem_cache. Also add a function to get the allocated size and a way to zero the total allocations. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add kmem_cache_set_non_kernel()Liam R. Howlett1-2/+14
kmem_cache_set_non_kernel() is a mechanism to allow a certain number of kmem_cache_alloc requests to succeed even when GFP_KERNEL is not set in the flags. This functionality allows for testing different paths though the code. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add pr_err defineLiam R. Howlett1-0/+1
define pr_err to printk Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>