| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Disable single-step by setting debug.control to KVM_GUESTDBG_ENABLE,
not to SINGLE_STEP_DISABLE. The latter is an arbitrary test enum that
just happens to have the same value as KVM_GUESTDBG_ENABLE, and so
effectively disables single-step debug.
No functional change intended.
Cc: Reiji Watanabe <[email protected]>
Fixes: b18e4d4aebdd ("KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP")
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Oliver Upton <[email protected]>
|
|
This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and
removing the PKRU bit from XSTATE_BV.
Signed-off-by: Kyle Huey <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Link: https://lore.kernel.org/all/20221115230932.7126-7-khuey%40kylehuey.com
|
|
Replace the perf_test_ prefix on symbol names with memstress_ to match
the new file name.
"memstress" better describes the functionality proveded by this library,
which is to provide functionality for creating and running a VM that
stresses VM memory by reading and writing to guest memory on all vCPUs
in parallel.
"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.
Signed-off-by: David Matlack <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rename the local variables "pta" (which is short for perf_test_args) for
args. "pta" is not an obvious acronym and using "args" mirrors
"vcpu_args".
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rename the perf_test_util.[ch] files to memstress.[ch]. Symbols are
renamed in the following commit to reduce the amount of churn here in
hopes of playiing nice with git's file rename detection.
The name "memstress" was chosen to better describe the functionality
proveded by this library, which is to create and run a VM that
reads/writes to guest memory on all vCPUs in parallel.
"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.
Signed-off-by: David Matlack <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Create the ability to randomize page access order with the -a
argument. This includes the possibility that the same pages may be hit
multiple times during an iteration or not at all.
Population has random access as false to ensure all pages will be
touched by population and avoid page faults in late dirty memory that
would pollute the test results.
Signed-off-by: Colton Lewis <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Randomize which pages are written vs read using the random number
generator.
Change the variable wr_fract and associated function calls to
write_percent that now operates as a percentage from 0 to 100 where X
means each page has an X% chance of being written. Change the -f
argument to -w to reflect the new variable semantics. Keep the same
default of 100% writes.
Population always uses 100% writes to ensure all memory is actually
populated and not just mapped to the zero page. The prevents expensive
copy-on-write faults from occurring during the dirty memory iterations
below, which would pollute the performance results.
Each vCPU calculates its own random seed by adding its index to the
seed provided.
Signed-off-by: Colton Lewis <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Create a -r argument to specify a random seed. If no argument is
provided, the seed defaults to 1. The random seed is set with
perf_test_set_random_seed() and must be set before guest_code runs to
apply.
Signed-off-by: Colton Lewis <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Implement random number generator for guest code to randomize parts
of the test, making it less predictable and a more accurate reflection
of reality.
The random number generator chosen is the Park-Miller Linear
Congruential Generator, a fancy name for a basic and well-understood
random number generator entirely sufficient for this purpose.
Signed-off-by: Colton Lewis <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a command line option, -c, to pin vCPUs to physical CPUs (pCPUs),
i.e. to force vCPUs to run on specific pCPUs.
Requirement to implement this feature came in discussion on the patch
"Make page tables for eager page splitting NUMA aware"
https://lore.kernel.org/lkml/[email protected]/
This feature is useful as it provides a way to analyze performance based
on the vCPUs and dirty log worker locations, like on the different NUMA
nodes or on the same NUMA nodes.
To keep things simple, implementation is intentionally very limited,
either all of the vCPUs will be pinned followed by an optional main
thread or nothing will be pinned.
Signed-off-by: Vipin Sharma <[email protected]>
Suggested-by: David Matlack <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Many KVM selftests take command line arguments which are supposed to be
positive (>0) or non-negative (>=0). Some tests do these validation and
some missed adding the check.
Add atoi_positive() and atoi_non_negative() to validate inputs in
selftests before proceeding to use those values.
Signed-off-by: Vipin Sharma <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Change test args memslot_modification_delay and nr_memslot_modifications
to delay and nr_iterations for simplicity.
Signed-off-by: Vipin Sharma <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Replace size_1gb defined in max_guest_memory_test.c with the SZ_1G,
SZ_2G and SZ_4G from linux/sizes.h header file.
Signed-off-by: Vipin Sharma <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
atoi() doesn't detect errors. There is no way to know that a 0 return
is correct conversion or due to an error.
Introduce atoi_paranoid() to detect errors and provide correct
conversion. Replace all atoi() calls with atoi_paranoid().
Signed-off-by: Vipin Sharma <[email protected]>
Suggested-by: David Matlack <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
dirty_log_perf_test
There are 13 command line options and they are not in any order. Put
them in alphabetical order to make it easy to add new options.
No functional change intended.
Signed-off-by: Vipin Sharma <[email protected]>
Reviewed-by: Wei Wang <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
dirty_log_perf_test
Passing -e option (Run VCPUs while dirty logging is being disabled) in
dirty_log_perf_test also unintentionally enables -g (Do not enable
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2). Add break between two switch case
logic.
Fixes: cfe12e64b065 ("KVM: selftests: Add an option to run vCPUs while disabling dirty logging")
Signed-off-by: Vipin Sharma <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
This initial code does a simple sample transfer tests. By default,
all PCM devices are detected and tested with short and long
buffering parameters for 4 seconds. If the sample transfer timing
is not in a +-100ms boundary, the test fails. Only the interleaved
buffering scheme is supported in this version.
The configuration may be modified with the configuration files.
A specific hardware configuration is detected and activated
using the sysfs regex matching. This allows to use the DMI string
(/sys/class/dmi/id/* tree) or any other system parameters
exposed in sysfs for the matching for the CI automation.
The configuration file may also specify the PCM device list to detect
the missing PCM devices.
v1..v2:
- added missing alsa-local.h header file
Cc: Mark Brown <[email protected]>
Cc: Pierre-Louis Bossart <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Jesse Barnes <[email protected]>
Cc: Jimmy Cheng-Yi Chiang <[email protected]>
Cc: Curtis Malainey <[email protected]>
Cc: Brian Norris <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Enable unprivileged bpf for selftests kernel by default.
This forces CI to run test_verifier tests in both privileged
and unprivileged modes.
The test_verifier.c:do_test uses sysctl kernel.unprivileged_bpf_disabled
to decide whether to run or to skip test cases in unprivileged mode.
The CONFIG_BPF_UNPRIV_DEFAULT_OFF controls the default value of the
kernel.unprivileged_bpf_disabled.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Verify that nullness information is porpagated in the branches of
register to register JEQ and JNE operations.
Signed-off-by: Eduard Zingerman <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
There is no point in failing the tests when RTC is not present.
Reported-by: Linux Kernel Functional Testing <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Tested-by: Daniel Diaz <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Currently, verifier uses MEM_ALLOC type tag to specially tag memory
returned from bpf_ringbuf_reserve helper. However, this is currently
only used for this purpose and there is an implicit assumption that it
only refers to ringbuf memory (e.g. the check for ARG_PTR_TO_ALLOC_MEM
in check_func_arg_reg_off).
Hence, rename MEM_ALLOC to MEM_RINGBUF to indicate this special
relationship and instead open the use of MEM_ALLOC for more generic
allocations made for user types.
Also, since ARG_PTR_TO_ALLOC_MEM_OR_NULL is unused, simply drop it.
Finally, update selftests using 'alloc_' verifier string to 'ringbuf_'.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
test_cpuset_prs.sh is failing with the following error:
test_cpuset_prs.sh: line 29: [[: 8
57%: syntax error in expression (error token is "57%")
This is happening because `lscpu | grep "^CPU(s)"` returns two lines in
some systems (such as Debian unstable):
# lscpu | grep "^CPU(s)"
CPU(s): 8
CPU(s) scaling MHz: 55%
This is a simple fix that discard the second line.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Kamalesh Babulal <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
In preparation for cxl_acpi walking pci_root->bus->bridge, add that
association to the mock pci_root instances.
Note that the missing 3rd entry in mock_pci_root[] was not noticed until
now given that the test version of to_cxl_host_bridge()
(tools/testing/cxl/mock_acpi.c), obviated the need for that entry.
However, "cxl/acpi: Improve debug messages in cxl_acpi_probe()" [1]
needs pci_root->bus->bridge to be populated.
Link: https://lore.kernel.org/r/[email protected] [1]
Cc: Robert Richter <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
CXL dports are added in a couple of code paths using
devm_cxl_add_dport(). Debug messages are individually generated, but are
incomplete and inconsistent. Change this by moving its generation to
devm_cxl_add_dport(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_dport() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix following coccicheck warning:
tools/testing/selftests/arm64/mte/check_mmap_options.c:64:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:66:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:135:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:96:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:190:24-25:
WARNING: Use ARRAY_SIZE
Signed-off-by: KaiLong Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
'time' is the local variable of run_test() function, while 'max_time' is
the local variable of do_transfer() function. So in do_transfer(),
$max_time should be used, not $time.
Please note that here $time == $max_time so the behaviour is not changed
but the right variable is used.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-11-11
We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).
The main changes are:
1) Veristat tool improvements to support custom filtering, sorting, and replay
of results, from Andrii Nakryiko.
2) BPF verifier precision tracking fixes and improvements,
from Andrii Nakryiko.
3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
Donald Hunter, Maryam Tahhan, Bagas Sanjaya.
4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
Eduard Zingerman.
5) Fix veth driver panic if XDP program is attached before veth_open, from
John Fastabend.
6) BPF verifier clean ups and fixes in preparation for follow up features,
from Kumar Kartikeya Dwivedi.
7) Add access to hwtstamp field from BPF sockops programs,
from Martin KaFai Lau.
8) Various fixes for BPF selftests and samples, from Artem Savkov,
Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.
9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
selftests/bpf: fix veristat's singular file-or-prog filter
selftests/bpf: Test skops->skb_hwtstamp
selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
bpf: Add hwtstamp field for the sockops prog
selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
bpf, docs: Document BPF_MAP_TYPE_ARRAY
docs/bpf: Document BPF map types QUEUE and STACK
docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
libbpf: Hashmap.h update to fix build issues using LLVM14
bpf: veth driver panics when xdp prog attached before veth_open
selftests: Fix test group SKIPPED result
selftests/bpf: Tests for btf_dedup_resolve_fwds
libbpf: Resolve unambigous forward declarations
libbpf: Hashmap interface update to allow both long and void* keys/values
samples/bpf: Fix sockex3 error: Missing BPF prog type
selftests/bpf: Fix u32 variable compared with less than zero
Documentation: bpf: Escape underscore in BPF type name prefix
selftests/bpf: Use consistent build-id type for liburandom_read.so
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Andrii Nakryiko says:
====================
bpf 2022-11-11
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 11 files changed, 83 insertions(+), 74 deletions(-).
The main changes are:
1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes,
from Alban Crequy.
2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment,
from Baisong Zhong.
3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with
a small build fix on top, from Peter Zijlstra and Nathan Chancellor.
4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen.
5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and
Yang Jihong.
6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai.
7) Fix copy_map_value() to track special zeroed out areas properly,
from Xu Kuohai.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix offset calculation error in __copy_map_value and zero_map_value
bpf: Initialize same number of free nodes for each pcpu_freelist
selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT
maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
selftests/bpf: Fix test_progs compilation failure in 32-bit arch
selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms
bpf: Fix memory leaks in __check_func_call
bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE()
bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)
bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
|
|
Fix the bug of filtering out filename too early, before we know the
program name, if using unified file-or-prog filter (i.e., -f
<any-glob>). Because we try to filter BPF object file early without
opening and parsing it, if any_glob (file-or-prog) filter is used we
have to accept any filename just to get program name, which might match
any_glob.
Fixes: 10b1b3f3e56a ("selftests/bpf: consolidate and improve file/prog filtering in veristat")
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:
- Tweak for the TCP zero-copy io_uring self test (Pavel)
- Rather than use our internal cached value of number of CQ events
available, use what the user can see (Dylan)
- Fix a typo in a comment, added in this release (me)
- Don't allow wrapping while adding provided buffers (me)
- Fix a double poll race, and add a lockdep assertion for it too
(Pavel)"
* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
io_uring/poll: lockdep annote io_poll_req_insert_locked
io_uring/poll: fix double poll req->flags races
io_uring: check for rollover of buffer ID when providing buffers
io_uring: calculate CQEs from the user visible value
io_uring: fix typo in io_uring.h comment
selftests/net: don't tests batched TCP io_uring zc
|
|
This patch tests reading the skops->skb_hwtstamp field.
A local test was also done such that the shinfo hwtstamp was temporary
set to a non zero value in the kernel bpf_skops_parse_hdr()
and the same value can be read by the skops test.
An adjustment is needed to the btf_dump selftest because
the changes in the 'struct bpf_sock_ops'.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch fixes the incorrect ASSERT test in tcp_hdr_options during
the CHECK to ASSERT macro cleanup.
Fixes: 3082f8cd4ba3 ("selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macros")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Wang Yufen <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
xdp_synproxy fails to be compiled in the 32-bit arch, log is as follows:
xdp_synproxy.c: In function 'parse_options':
xdp_synproxy.c:175:36: error: left shift count >= width of type [-Werror=shift-count-overflow]
175 | *tcpipopts = (mss6 << 32) | (ttl << 24) | (wscale << 16) | mss4;
| ^~
xdp_synproxy.c: In function 'syncookie_open_bpf_maps':
xdp_synproxy.c:289:28: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
289 | .map_ids = (__u64)map_ids,
| ^
Fix it.
Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Yang Jihong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This commit tests previous fix of bpf_probe_read_kernel_str().
The BPF helper bpf_probe_read_kernel_str should return -EFAULT when
given a bad source pointer and the target buffer should only be modified
to make the string NULL terminated.
bpf_probe_read_kernel_str() was previously inserting a NULL before the
beginning of the dst buffer. This test should ensure that the
implementation stays correct for now on.
Without the fix, this test will fail as follows:
$ cd tools/testing/selftests/bpf
$ make
$ sudo ./test_progs --name=varlen
...
test_varlen:FAIL:check got 0 != exp 66
Signed-off-by: Alban Crequy <[email protected]>
Signed-off-by: Francis Laniel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Changes v1 to v2:
- add ack tag
- fix my email
- rebase on bpf tree and tag for bpf tree
|
|
drivers/net/can/pch_can.c
ae64438be192 ("can: dev: fix skb drop check")
1dd1b521be85 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
|
|
Add some mix of tests into page_fault_test: memory regions with all the
pairwise combinations of read-only, userfaultfd, and dirty-logging. For
example, writing into a read-only region which has a hole handled with
userfaultfd.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some readonly memslot tests into page_fault_test. Mark the data and/or
page-table memory regions as readonly, perform some accesses, and check
that the right fault is triggered when expected (e.g., a store with no
write-back should lead to an mmio exit).
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some dirty logging tests into page_fault_test. Mark the data and/or
page-table memory regions for dirty logging, perform some accesses, and
check that the dirty log bits are set or clean when expected.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some userfaultfd tests into page_fault_test. Punch holes into the
data and/or page-table memslots, perform some accesses, and check that
the faults are taken (or not taken) when expected.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new test for stage 2 faults when using different combinations of
guest accesses (e.g., write, S1PTW), backing source type (e.g., anon)
and types of faults (e.g., read on hugetlbfs with a hole). The next
commits will add different handling methods and more faults (e.g., uffd
and dirty logging). This first commit starts by adding two sanity checks
for all types of accesses: AF setting by the hw, and accessing memslots
with holes.
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
allocations
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <[email protected]>
Cc: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Refactor virt_arch_pgd_alloc() and vm_vaddr_alloc() in both RISC-V and
aarch64 to fix the alignment of parameters in a couple of calls. This will
make it easier to fix the alignment in a future commit that adds an extra
parameter (that happens to be very long).
No functional change intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <[email protected]>
Cc: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the backing_src_type into struct userspace_mem_region. This struct
already stores a lot of info about memory regions, except the backing
source type. This info will be used by a future commit in order to
determine the method for punching a hole.
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Define macros for memory type indexes and construct DEFAULT_MAIR_EL1
with macros from asm/sysreg.h. The index macros can then be used when
constructing PTEs (instead of using raw numbers).
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Deleting a memslot (when freeing a VM) is not closing the backing fd,
nor it's unmapping the alias mapping. Fix by adding the missing close
and munmap.
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a library function to get the PTE (a host virtual address) of a
given GVA. This will be used in a future commit by a test to clear and
check the access flag of a particular page.
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|