aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2021-02-08selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.cTiezhu Yang1-2/+2
When call ptrace(PTRACE_CONT, ...) failed, use correct error messages. Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/vDSO: fix ABI selftest on riscvTobias Klauser1-1/+3
Only older versions of the RISC-V GCC toolchain define __riscv__. Check for __riscv as well, which is used by newer GCC toolchains. Also set VDSO_32BIT based on __riscv_xlen. Before (on riscv64): $ ./vdso_test_abi [vDSO kselftest] VDSO_VERSION: LINUX_4 Could not find __vdso_gettimeofday Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_REALTIME [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_BOOTTIME [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_TAI [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_REALTIME_COARSE [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC_RAW [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC_COARSE [PASS] Could not find __vdso_time After (on riscv32): $ ./vdso_test_abi [vDSO kselftest] VDSO_VERSION: LINUX_4.15 The time is 1612449376.015086 The time is 1612449376.18340784 The resolution is 0 1 clock_id: CLOCK_REALTIME [PASS] The time is 774.842586182 The resolution is 0 1 clock_id: CLOCK_BOOTTIME [PASS] The time is 1612449376.22536565 The resolution is 0 1 clock_id: CLOCK_TAI [PASS] The time is 1612449376.20885172 The resolution is 0 4000000 clock_id: CLOCK_REALTIME_COARSE [PASS] The time is 774.845491269 The resolution is 0 1 clock_id: CLOCK_MONOTONIC [PASS] The time is 774.849534200 The resolution is 0 1 clock_id: CLOCK_MONOTONIC_RAW [PASS] The time is 774.842139684 The resolution is 0 4000000 clock_id: CLOCK_MONOTONIC_COARSE [PASS] Could not find __vdso_time Signed-off-by: Tobias Klauser <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Acked-by: Palmer Dabbelt <[email protected]> Acked-by: Vincenzo Frascino <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/x86/ldt_gdt: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/x86/ldt_gdt.c:610:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/ipc: remove unneeded semicolonYang Li1-3/+3
Eliminate the following coccicheck warning: ./tools/testing/selftests/ipc/msgque.c:72:3-4: Unneeded semicolon ./tools/testing/selftests/ipc/msgque.c:183:2-3: Unneeded semicolon ./tools/testing/selftests/ipc/msgque.c:191:2-3: Unneeded semicolon Signed-off-by: Yang Li <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroedJohn Stultz1-0/+86
Add a check to validate that buffers allocated from the heaps are properly zeroed before being given to userland. It is done by allocating a number of buffers, and filling them with a nonzero pattern, then closing and reallocating more buffers and checking that they are all properly zeroed. This is helpful to validate any cached buffers are zeroed before being given back out. Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Cleanup test outputJohn Stultz1-23/+21
Cleanup the test output so it is a bit easier to read Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Softly fail if don't find a vgem deviceJohn Stultz1-8/+7
While testing against a vgem device is helpful for testing importing they aren't always configured in, so don't make it a fatal failure. Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNCJohn Stultz1-7/+13
Add logic to check the dmabuf sync calls succeed. Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's ↵John Stultz1-1/+1
usr/include dir Copied in from somewhere else, the makefile was including the kerne's usr/include dir, which caused the asm/ioctl.h file to be used. Unfortunately, that file has different values for _IOC_SIZEBITS and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then causes the _IOCW macros to give the wrong ioctl numbers, specifically for DMA_BUF_IOCTL_SYNC. This patch simply removes the extra include from the Makefile Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: a8779927fd86c ("kselftests: Add dma-heap test") Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests: tc-testing: u32: Add tests covering sample optionPhil Sutter1-0/+46
Kernel's key folding basically consists of shifting away least significant zero bits in mask and masking the resulting value with (divisor - 1). Test for u32's 'sample' option to behave identical. Suggested-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-08kunit: tool: fix unintentional statefulness in run_kernel()Daniel Latypov1-1/+3
This is a bug that has been present since the first version of this code. Using [] as a default parameter is dangerous, since it's mutable. Example using the REPL: >>> def bad(param = []): ... param.append(len(param)) ... print(param) ... >>> bad() [0] >>> bad() [0, 1] This wasn't a concern in the past since it would just keep appending the same values to it. E.g. before, `args` would just grow in size like: [mem=1G', 'console=tty'] [mem=1G', 'console=tty', mem=1G', 'console=tty'] But with now filter_glob, this is more dangerous, e.g. run_kernel(filter_glob='my-test*') # default modified here run_kernel() # filter_glob still applies here! That earlier `filter_glob` will affect all subsequent calls that don't specify `args`. Note: currently the kunit tool only calls run_kernel() at most once, so it's not possible to trigger any negative side-effects right now. Fixes: 6ebf5866f2e8 ("kunit: tool: add Python wrappers for running KUnit tests") Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: add support for filtering suites by globDaniel Latypov3-12/+28
This allows running different subsets of tests, e.g. $ ./tools/testing/kunit/kunit.py build $ ./tools/testing/kunit/kunit.py exec 'list*' $ ./tools/testing/kunit/kunit.py exec 'kunit*' This passes the "kunit_filter.glob" commandline option to the UML kernel, which currently only supports filtering by suite name. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/net: so_txtime: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/net/so_txtime.c:199:3-4: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-08kunit: make kunit_tool accept optional path to .kunitconfig fragmentDaniel Latypov3-7/+46
Currently running tests via KUnit tool means tweaking a .kunitconfig file, which you'd keep around locally and never commit. This changes makes it so users can pass in a path to a kunitconfig. One of the imagined use cases is having kunitconfig fragments in-tree to formalize interesting sets of tests for features/subsystems, e.g. $ ./tools/testing/kunit/kunit.py run --kunticonfig=fs/ext4/kunitconfig For now, this hypothetical fs/ext4/kunitconfig would contain CONFIG_KUNIT=y CONFIG_EXT4_FS=y CONFIG_EXT4_KUNIT_TESTS=y At the moment, it's not hard to manually whip up this file, but as more and more tests get added, this will get tedious. It also opens the door to documenting how to run all the tests relevant to a specific subsystem or feature as a simple one-liner. This can be seen as an analogue to tools/testing/selftests/*/config But in the case of KUnit, the tests live in the same directory as the code-under-test, so it feels more natural to allow the kunitconfig fragments to live anywhere. (Though, people could create a separate directory if wanted; this patch imposes no restrictions on the path). Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: simplify kconfig is_subset_of() logicDaniel Latypov1-7/+6
Don't use an O(nm) algorithm* and make it more readable by using a dict. *Most obviously, it does a nested for-loop over the entire other config. A bit more subtle, it calls .entries(), which constructs a set from the list for _every_ outer iteration. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08minor: kunit: tool: fix unit test so it can run from non-root dirDaniel Latypov1-36/+24
Also take this time to rename get_absolute_path() to test_data_path(). 1. the name is currently a lie. It gives relative paths, e.g. if I run from the same dir as the test file, it gives './test_data/<file>' See https://docs.python.org/3/reference/import.html#__file__, which doesn't stipulate that implementations provide absolute paths. 2. it's only used for generating paths to tools/testing/kunit/test_data/ So we can tersen things by making it less general. Cache the absolute path to the test data files per suggestion from [1]. Using relative paths, the tests break because of this code in kunit.py if get_kernel_root_path():         os.chdir(get_kernel_root_path()) [1] https://lore.kernel.org/linux-kselftest/CABVgOSnH0gz7z5JhRCGyG1wg0zDDBTLoSUCoB-gWMeXLgVTo2w@mail.gmail.com/ Fixes: 5578d008d9e0 ("kunit: tool: fix running kunit_tool from outside kernel tree") Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: use `with open()` in unit testDaniel Latypov1-19/+14
The use of manual open() and .close() calls seems to be an attempt to keep the contents in scope. But Python doesn't restrict variables like that, so we can introduce new variables inside of a `with` and use them outside. Do so to make the code more Pythonic. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: stop using bare asserts in unit testDaniel Latypov1-26/+24
Use self.assertEqual/assertNotEqual() instead. Besides being more appropriate in a unit test, it'll also give a better error message by show the unexpected values. Also * Delete redundant check of exception types. self.assertRaises does this. * s/kall/call. There's no reason to name it this way. * This is probably a misunderstanding from the docs which uses it since `mock.call` is in scope as `call`. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: fix unit test cleanup handlingDaniel Latypov1-8/+6
* Stop leaking file objects. * Use self.addCleanup() to ensure we call cleanup functions even if setUp() fails. * use mock.patch.stopall instead of more error-prone manual approach Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08bpf/benchs/bench_ringbufs: Remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/bpf/benchs/bench_ringbufs.c:322:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-07Merge tag 'libnvdimm-fixes-5.11-rc7' of ↵Linus Torvalds4-2/+1245
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A fix for a crash scenario that has been present since the initial merge, a minor regression in sysfs attribute visibility, and a fix for some flexible array warnings. The bulk of this pull is an update to the libnvdimm unit test infrastructure to test non-ACPI platforms. Given there is zero regression risk for test updates, and the tests enable validation of bits headed towards the next merge window, I saw no reason to hold the new tests back. Santosh originally submitted this before the v5.11 window opened. Summary: - Fix a crash when sysfs accesses race 'dimm' driver probe/remove. - Fix a regression in 'resource' attribute visibility necessary for mapping badblocks and other physical address interrogations. - Fix some flexible array warnings - Expand the unit test infrastructure for non-ACPI platforms" * tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/dimm: Avoid race between probe and available_slots_show() ndtest: Add papr health related flags ndtest: Add nvdimm control functions ndtest: Add regions and mappings to the test buses ndtest: Add dimm attributes ndtest: Add dimms to the two buses ndtest: Add compatability string to treat it as PAPR family testing/nvdimm: Add test module for non-nfit platforms libnvdimm/namespace: Fix visibility of namespace resource attribute libnvdimm/pmem: Remove unused header ACPI: NFIT: Fix flexible_array.cocci warnings
2021-02-07Merge tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+3
Pull dma-mapping fix from Christoph Hellwig: "Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry Song)" * tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: use u8 for reserved field in uAPI structure
2021-02-06selftests: mptcp: add command line arguments for mptcp_join.shGeliang Tang1-478/+590
Since the mptcp_join script is becoming too big, this patch splits it into several smaller chunks, each of them has been defined in a function as a individual test group for several related testcases. Using bash getopts function to parse command line arguments, and invoke each function to do the individual test group. Here are all the arguments: -f subflows_tests -s signal_address_tests -l link_failure_tests -t add_addr_timeout_tests -r remove_tests -a add_tests -6 ipv6_tests -4 v4mapped_tests -b backup_tests -p add_addr_ports_tests -c syncookies_tests -h help Run mptcp_join.sh with no argument will execute all testcases. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-02-06entry: Use different define for selector variable in SUDGabriel Krisman Bertazi2-9/+13
Michael Kerrisk suggested that, from an API perspective, it is a bad idea to share the PR_SYS_DISPATCH_ defines between the prctl operation and the selector variable. Therefore, define two new constants to be used by SUD's selector variable and update the corresponding documentation and test cases. While this changes the API syscall user dispatch has never been part of a Linux release, it will show up for the first time in 5.11. Suggested-by: Michael Kerrisk (man-pages) <[email protected]> Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-02-05dma-mapping: benchmark: pretend DMA is transmittingBarry Song1-3/+18
In a real dma mapping user case, after dma_map is done, data will be transmit. Thus, in multi-threaded user scenario, IOMMU contention should not be that severe. For example, if users enable multiple threads to send network packets through 1G/10G/100Gbps NIC, usually the steps will be: map -> transmission -> unmap. Transmission delay reduces the contention of IOMMU. Here a delay is added to simulate the transmission between map and unmap so that the tested result could be more accurate for TX and simple RX. A typical TX transmission for NIC would be like: map -> TX -> unmap since the socket buffers come from OS. Simple RX model eg. disk driver, is also map -> RX -> unmap, but real RX model in a NIC could be more complicated considering packets can come spontaneously and many drivers are using pre-mapped buffers pool. This is in the TBD list. Signed-off-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-02-05dma-mapping: benchmark: use u8 for reserved field in uAPI structureBarry Song1-1/+3
The original code put five u32 before a u64 expansion[10] array. Five is odd, this will cause trouble in the extension of the structure by adding new features. This patch moves to use u8 for reserved field to avoid future alignment risk. Meanwhile, it also clears the memory of struct map_benchmark in tools, otherwise, if users use old version to run on newer kernel, the random expansion value will cause side effect on newer kernel. Signed-off-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix combination of --reap and --update in xt_recent that triggers UAF, from Jozsef Kadlecsik. 2) Fix current year in nft_meta selftest, from Fabian Frederick. 3) Fix possible UAF in the netns destroy path of nftables. 4) Fix incorrect checksum calculation when mangling ports in flowtable, from Sven Auhagen. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: flowtable: fix tcp and udp header checksum update netfilter: nftables: fix possible UAF over chains from packet path in netns selftests: netfilter: fix current year netfilter: xt_recent: Fix attempt to update deleted entry ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-02-04selftests: txtimestamp: fix compilation issueVadim Fedorenko1-3/+3
PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in test. Include it instead of <netpacket/packet.h> otherwise the error of redefinition arrives. Also fix the compiler warning about ambiguous control flow by adding explicit braces. Fixes: 8fe2f761cae9 ("net-timestamp: expand documentation") Suggested-by: Willem de Bruijn <[email protected]> Signed-off-by: Vadim Fedorenko <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-02-04bpf/selftests: Update the IMA test to use BPF ring bufferKP Singh2-13/+43
Instead of using shared global variables between userspace and BPF, use the ring buffer to send the IMA hash on the BPF ring buffer. This helps in validating both IMA and the usage of the ringbuffer in sleepable programs. Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-04bpf/selftests: Add a short note about vmtest.sh in README.rstKP Singh1-0/+24
Add a short note to make contributors aware of the existence of the script. The documentation does not intentionally document all the options of the script to avoid mentioning it in two places (it's available in the usage / help message of the script). Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-04bpf: Helper script for running BPF presubmit testsKP Singh1-0/+368
The script runs the BPF selftests locally on the same kernel image as they would run post submit in the BPF continuous integration framework. The goal of the script is to allow contributors to run selftests locally in the same environment to check if their changes would end up breaking the BPF CI and reduce the back-and-forth between the maintainers and the developers. Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-04KVM: x86: declare Xen HVM shared info capability and add test caseDavid Woodhouse2-0/+170
Instead of adding a plethora of new KVM_CAP_XEN_FOO capabilities, just add bits to the return value of KVM_CAP_XEN_HVM. Signed-off-by: David Woodhouse <[email protected]>
2021-02-04KVM: x86/xen: Fix coexistence of Xen and Hyper-V hypercallsJoao Martins1-6/+33
Disambiguate Xen vs. Hyper-V calls by adding 'orl $0x80000000, %eax' at the start of the Hyper-V hypercall page when Xen hypercalls are also enabled. That bit is reserved in the Hyper-V ABI, and those hypercall numbers will never be used by Xen (because it does precisely the same trick). Switch to using kvm_vcpu_write_guest() while we're at it, instead of open-coding it. Signed-off-by: David Woodhouse <[email protected]>
2021-02-04KVM: x86/xen: intercept xen hypercalls if enabledJoao Martins3-0/+125
Add a new exit reason for emulator to handle Xen hypercalls. Since this means KVM owns the ABI, dispense with the facility for the VMM to provide its own copy of the hypercall pages; just fill them in directly using VMCALL/VMMCALL as we do for the Hyper-V hypercall page. This behaviour is enabled by a new INTERCEPT_HCALL flag in the KVM_XEN_HVM_CONFIG ioctl structure, and advertised by the same flag being returned from the KVM_CAP_XEN_HVM check. Rename xen_hvm_config() to kvm_xen_write_hypercall_page() and move it to the nascent xen.c while we're at it, and add a test case. Signed-off-by: Joao Martins <[email protected]> Signed-off-by: David Woodhouse <[email protected]>
2021-02-04selftest: kvm: x86: test KVM_GET_CPUID2 and guest visible CPUIDs against ↵Vitaly Kuznetsov5-0/+233
KVM_GET_SUPPORTED_CPUID Commit 181f494888d5 ("KVM: x86: fix CPUID entries returned by KVM_GET_CPUID2 ioctl") revealed that we're not testing KVM_GET_CPUID2 ioctl at all. Add a test for it and also check that from inside the guest visible CPUIDs are equal to it's output. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04selftests: kvm/x86: add test for pmu msr MSR_IA32_PERF_CAPABILITIESLike Xu5-1/+169
This test will check the effect of various CPUID settings on the MSR_IA32_PERF_CAPABILITIES MSR, check that whatever user space writes with KVM_SET_MSR is _not_ modified from the guest and can be retrieved with KVM_GET_MSR, and check that invalid LBR formats are rejected. Signed-off-by: Like Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Disable dirty logging with vCPUs runningBen Gardon1-5/+5
Disabling dirty logging is much more intestesting from a testing perspective if the vCPUs are still running. This also excercises the code-path in which collapsible SPTEs must be faulted back in at a higher level after disabling dirty logging. To: [email protected] CC: Peter Xu <[email protected]> CC: Andrew Jones <[email protected]> CC: Thomas Huth <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Add backing src parameter to dirty_log_perf_testBen Gardon8-15/+63
Add a parameter to control the backing memory type for dirty_log_perf_test so that the test can be run with hugepages. To: [email protected] CC: Peter Xu <[email protected]> CC: Andrew Jones <[email protected]> CC: Thomas Huth <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Add memslot modification stress testBen Gardon3-0/+213
Add a memslot modification stress test in which a memslot is repeatedly created and removed while vCPUs access memory in another memslot. Most userspaces do not create or remove memslots on running VMs which makes it hard to test races in adding and removing memslots without a dedicated test. Adding and removing a memslot also has the effect of tearing down the entire paging structure, which leads to more page faults and pressure on the page fault handling path than a one-and-done memory population test. Reviewed-by: Jacob Xu <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Add option to overlap vCPU memory accessBen Gardon4-18/+57
Add an option to overlap the ranges of memory each vCPU accesses instead of partitioning them. This option will increase the probability of multiple vCPUs faulting on the same page at the same time, and causing interesting races, if there are bugs in the page fault handler or elsewhere in the kernel. Reviewed-by: Jacob Xu <[email protected]> Reviewed-by: Makarand Sonare <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Fix population stage in dirty_log_perf_testBen Gardon1-3/+8
Currently the population stage in the dirty_log_perf_test does nothing as the per-vCPU iteration counters are not initialized and the loop does not wait for each vCPU. Remedy those errors. Reviewed-by: Jacob Xu <[email protected]> Reviewed-by: Makarand Sonare <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Convert iterations to int in dirty_log_perf_testBen Gardon1-13/+13
In order to add an iteration -1 to indicate that the memory population phase has not yet completed, convert the interations counters to ints. No functional change intended. Reviewed-by: Jacob Xu <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Avoid flooding debug log while populating memoryBen Gardon1-5/+4
Peter Xu pointed out that a log message printed while waiting for the memory population phase of the dirty_log_perf_test will flood the debug logs as there is no delay after printing the message. Since the message does not provide much value anyway, remove it. Reviewed-by: Jacob Xu <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Rename timespec_diff_now to timespec_elapsedBen Gardon4-13/+13
In response to some earlier comments from Peter Xu, rename timespec_diff_now to the much more sensible timespec_elapsed. No functional change intended. Reviewed-by: Jacob Xu <[email protected]> Reviewed-by: Makarand Sonare <[email protected]> Signed-off-by: Ben Gardon <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-04KVM: selftests: Test IPI to halted vCPU in xAPIC while backing page movesPeter Shier4-0/+566
When a guest is using xAPIC KVM allocates a backing page for the required EPT entry for the APIC access address set in the VMCS. If mm decides to move that page the KVM mmu notifier will update the VMCS with the new HPA. This test induces a page move to test that APIC access continues to work correctly. It is a directed test for commit e649b3f0188f "KVM: x86: Fix APIC page invalidation race". Tested: ran for 1 hour on a skylake, migrating backing page every 1ms Depends on patch "selftests: kvm: Add exception handling to selftests" from [email protected] that has not yet been queued. Signed-off-by: Peter Shier <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-03selftests/tls: fix selftest with CHACHA20-POLY1305Vadim Fedorenko1-5/+10
TLS selftests were broken also because of use of structure that was not exported to UAPI. Fix by defining the union in tests. Fixes: 4f336e88a870 (selftests/tls: add CHACHA20-POLY1305 to tls selftests) Reported-by: Rong Chen <[email protected]> Signed-off-by: Vadim Fedorenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-02-03net: selftests: Add lanes setting testDanielle Ratson3-0/+249
Test that setting lanes parameter is working. Set max speed and max lanes in the list of advertised link modes, and then try to set max speed with the lanes below max lanes if exists in the list. And then, test that setting number of lanes larger than max lanes fails. Do the above for both autoneg on and off. $ ./ethtool_lanes.sh TEST: 4 lanes is autonegotiated [ OK ] TEST: Lanes number larger than max width is not set [ OK ] TEST: Autoneg off, 4 lanes detected during force mode [ OK ] TEST: Lanes number larger than max width is not set [ OK ] Signed-off-by: Danielle Ratson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-02-04selftests: netfilter: fix current yearFabian Frederick1-1/+1
use date %Y instead of %G to read current year Problem appeared when running lkp-tests on 01/01/2021 Fixes: 48d072c4e8cd ("selftests: netfilter: add time counter check") Reported-by: kernel test robot <[email protected]> Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-02-03selftest/bpf: Testing for multiple logs on REJECTAndrei Matei1-3/+13
This patch adds support to verifier tests to check for a succession of verifier log messages on program load failure. This makes the errstr field work uniformly across REJECT and VERBOSE_ACCEPT checks. This patch also increases the maximum size of a message in the series of messages to test from 80 chars to 200 chars. This is in order to keep existing tests working, which sometimes test for messages larger than 80 chars (which was accepted in the REJECT case, when testing for a single message, but not in the VERBOSE_ACCEPT case, when testing for possibly multiple messages). And example of such a long, checked message is in bounds.c: "R1 has unknown scalar with mixed signed bounds, pointer arithmetic with it prohibited for !root" Signed-off-by: Andrei Matei <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-02selftests/bpf: Fix a compiler warning in local_storage testKP Singh1-1/+1
Some compilers trigger a warning when tmp_dir_path is allocated with a fixed size of 64-bytes and used in the following snprintf: snprintf(tmp_exec_path, sizeof(tmp_exec_path), "%s/copy_of_rm", tmp_dir_path); warning: ‘/copy_of_rm’ directive output may be truncated writing 11 bytes into a region of size between 1 and 64 [-Wformat-truncation=] This is because it assumes that tmp_dir_path can be a maximum of 64 bytes long and, therefore, the end-result can get truncated. Fix it by not using a fixed size in the initialization of tmp_dir_path which allows the compiler to track actual size of the array better. Fixes: 2f94ac191846 ("bpf: Update local storage test to check handling of null ptrs") Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.