| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add bench test for module portion of the symbols as well.
# ./test_progs -v -t kprobe_multi_bench_attach_module
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_kprobe_multi_bench_attach:PASS:get_syms 0 nsec
test_kprobe_multi_bench_attach:PASS:kprobe_multi_empty__open_and_load 0 nsec
test_kprobe_multi_bench_attach:PASS:bpf_program__attach_kprobe_multi_opts 0 nsec
test_kprobe_multi_bench_attach: found 26620 functions
test_kprobe_multi_bench_attach: attached in 0.182s
test_kprobe_multi_bench_attach: detached in 0.082s
#96 kprobe_multi_bench_attach_module:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Successfully unloaded bpf_testmod.ko.
It's useful for testing kprobe multi link modules resolving.
Acked-by: Song Liu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
A testcase to check that verifier.c:copy_register_state() preserves
register parentage chain and livness information.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are some issues with the bpf/nat6to4.c building.
1. It use TEST_CUSTOM_PROGS, which will add the nat6to4.o to
kselftest-list file and run by common run_tests.
2. When building the test via `make -C tools/testing/selftests/
TARGETS="net"`, the nat6to4.o will be build in selftests/net/bpf/
folder. But in test udpgro_frglist.sh it refers to ../bpf/nat6to4.o.
The correct path should be ./bpf/nat6to4.o.
3. If building the test via `make -C tools/testing/selftests/ TARGETS="net"
install`. The nat6to4.o will be installed to kselftest_install/net/
folder. Then the udpgro_frglist.sh should refer to ./nat6to4.o.
To fix the confusing test path, let's just move the nat6to4.c to net folder
and build it as TEST_GEN_FILES.
Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests")
Tested-by: Björn Töpel <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
__USE_GNU should be an internal macro only used inside glibc. Either
memfd_create() or fallocate() requires _GNU_SOURCE per man page, where
__USE_GNU will further be defined by glibc headers include/features.h:
#ifdef _GNU_SOURCE
# define __USE_GNU 1
#endif
This fixes:
>> hugetlb-madvise.c:20: warning: "__USE_GNU" redefined
20 | #define __USE_GNU
|
In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33,
from /usr/include/stdlib.h:26,
from hugetlb-madvise.c:16:
/usr/include/features.h:407: note: this is the location of the previous definition
407 | # define __USE_GNU 1
|
Link: https://lkml.kernel.org/r/Y8V9z+z6Tk7NetI3@x1n
Signed-off-by: Peter Xu <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Mike Kravetz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Selftests vm builds break when doing cross-compilation. The Makefile
MACHINE variable incorrectly picks upp the host machine architecture.
If the CROSS_COMPILE variable is set, dig out the target host architecture
from CROSS_COMPILE, instead of calling uname.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Björn Töpel <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
If MADV_PAGEOUT is not defined (e.g., on AlmaLinux 8), compilation will
fail. Let's fix that like khugepaged.c does by conditionally defining
MADV_PAGEOUT.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 69c66add5663 ("selftests/vm: anon_cow: test COW handling of anonymous memory")
Signed-off-by: David Hildenbrand <[email protected]>
Reported-by: Mirsad Goran Todorovac <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a test to assert that we can mremap() and expand a mapping starting
from an offset within an existing mapping. We unmap the last page in a 3
page mapping to ensure that the remap should always succeed, before
remapping from the 2nd page.
This is additionally a regression test for the issue solved in "mm,
mremap: fix mremap() expanding vma with addr inside vma" and confirmed to
fail prior to the change and pass after it.
Finally, this patch updates the existing mremap expand merge test to check
error conditions and reduce code duplication between the two tests.
[[email protected]: increment num_expand_tests so test doesn't complain about unexpected tests being run]
Link: https://lkml.kernel.org/r/8ff3ba3cadc0b6c1b2688ae5c851bf73aa062d57.1673701836.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/02b117a8ffd52acc01dc66c2fb39754f08d92c0e.1672675824.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Jakub Matěna <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Rename selftets/vm to selftests/mm for being more consistent with the
code, documentation, and tools directories, and won't be confused with
virtual machines.
[[email protected]: convert missing vm->mm changes]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Currently, anonymous PTE-mapped THPs cannot be collapsed in-place:
collapsing (e.g., via MADV_COLLAPSE) implies allocating a fresh THP and
mapping that new THP via a PMD: as it's a fresh anon THP, it will get the
exclusive flag set on the head page and everybody is happy.
However, if the kernel would ever support in-place collapse of anonymous
THPs (replacing a page table mapping each sub-page of a THP via PTEs with
a single PMD mapping the complete THP), exclusivity information stored for
each sub-page would have to be collapsed accordingly:
(1) All PTEs map !exclusive anon sub-pages: the in-place collapsed THP
must not not have the exclusive flag set on the head page mapped by
the PMD. This is the easiest case to handle ("simply don't set any
exclusive flags").
(2) All PTEs map exclusive anon sub-pages: when collapsing, we have to
clear the exclusive flag from all tail pages and only leave the
exclusive flag set for the head page. Otherwise, fork() after
collapse would not clear the exclusive flags from the tail pages
and we'd be in trouble once PTE-mapping the shared THP when writing
to shared tail pages that still have the exclusive flag set. This
would effectively revert what the PTE-mapping code does when
propagating the exclusive flag to all sub-pages.
(3) PTEs map a mixture of exclusive and !exclusive anon sub-pages (can
happen e.g., due to MADV_DONTFORK before fork()). We must not
collapse the THP in-place, otherwise bad things may happen:
the exclusive flags of sub-pages would get ignored and the
exclusive flag of the head page would get used instead.
Now that we have MADV_COLLAPSE in place to trigger collapsing a THP, let's
add some test cases that would bail out early, if we'd
voluntarily/accidantially unlock in-place collapse for anon THPs and
forget about taking proper care of exclusive flags.
Running the test on a kernel with MADV_COLLAPSE support:
# [INFO] Anonymous THP tests
# [RUN] Basic COW after fork() when collapsing before fork()
ok 169 No leak from parent into child
# [RUN] Basic COW after fork() when collapsing after fork() (fully shared)
ok 170 # SKIP MADV_COLLAPSE failed: Invalid argument
# [RUN] Basic COW after fork() when collapsing after fork() (lower shared)
ok 171 No leak from parent into child
# [RUN] Basic COW after fork() when collapsing after fork() (upper shared)
ok 172 No leak from parent into child
For now, MADV_COLLAPSE always seems to fail if all PTEs map shared
sub-pages.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Zach O'Keefe <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Preallocations are common in the VMA code to avoid allocating under
certain locking conditions. The preallocations must also cover the
worst-case scenario. Removing the GFP_ZERO flag from the
kmem_cache_alloc() (and bulk variant) calls will reduce the amount of time
spent zeroing memory that may not be used. Only zero out the necessary
area to keep track of the allocations in the maple state. Zero the entire
node prior to using it in the tree.
This required internal changes to node counting on allocation, so the test
code is also updated.
This restores some micro-benchmark performance: up to +9% in mmtests mmap1
by my testing +10% to +20% in mmap, mmapaddr, mmapmany tests reported by
Red Hat
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2149636
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam Howlett <[email protected]>
Reported-by: Jirka Hladky <[email protected]>
Suggested-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Fix a typo of "comaring" which should be "comparing".
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Xu Panda <[email protected]>
Signed-off-by: xu xin <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add simple test cases for scheme filters of DAMON sysfs interface. The
test cases check if the files are populated as expected, receives some
valid inputs, and refuses some invalid inputs.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Tests to verify MFD_NOEXEC, MFD_EXEC and vm.memfd_noexec sysctl.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jeff Xu <[email protected]>
Co-developed-by: Daniel Verkamp <[email protected]>
Signed-off-by: Daniel Verkamp <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: David Herrmann <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jorge Lucangeli Obes <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Basic tests to ensure that user/group/other execute bits cannot be changed
after applying F_SEAL_EXEC to a memfd.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Daniel Verkamp <[email protected]>
Co-developed-by: Jeff Xu <[email protected]>
Signed-off-by: Jeff Xu <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: David Herrmann <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jorge Lucangeli Obes <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Merge branch 'master' into mm-hotfixes-stable
|
|
If CONFIG_NF_CONNTRACK=m, there are no definitions of NF_NAT_MANIP_SRC
and NF_NAT_MANIP_DST in vmlinux.h, build test_bpf_nf.c failed.
$ make -C tools/testing/selftests/bpf/
CLNG-BPF [test_maps] test_bpf_nf.bpf.o
progs/test_bpf_nf.c:160:42: error: use of undeclared identifier 'NF_NAT_MANIP_SRC'
bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC);
^
progs/test_bpf_nf.c:163:42: error: use of undeclared identifier 'NF_NAT_MANIP_DST'
bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST);
^
2 errors generated.
Copy the definitions in include/net/netfilter/nf_nat.h to test_bpf_nf.c,
in order to avoid redefinitions if CONFIG_NF_CONNTRACK=y, rename them with
___local suffix. This is similar with commit 1058b6a78db2 ("selftests/bpf:
Do not fail build if CONFIG_NF_CONNTRACK=m/n").
Fixes: b06b45e82b59 ("selftests/bpf: add tests for bpf_ct_set_nat_info kfunc")
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Now that the new API for hid_bpf_attach_prog() is in place, ensure we
get an fd when calling this function. And remove the fallback code.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
We plan on changing the return value of hid_bpf_attach_prog().
Instead of returning an error code, it will return an fd to a bpf_link.
This bpf_link is responsible for the binding between the bpf program and
the hid device.
Add a fallback mechanism to not break bisections by pinning the program
when we run this test against the non changed kernel.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Turns out that if bpffs was not mounted, the test was silently passing.
So ensure it passes by checking the mount command result.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Add a second BPF program to attach to the device, as the development of
this feature showed that we also need to ensure we can detach multiple
programs to a device (hid_bpf_link->hid_table_index was actually not set
initially, and this lead to any BPF program not being released except for
the first one).
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
clang doesn't like to compile a source to the final binary directly:
clang-14: error: cannot specify -o when generating multiple output files
So split the final rule in 2, and ensure we compile all dependencies
before.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Similar-ish in many points from the script in selftests/bpf, with a few
differences:
- relies on boot2container instead of a plain qemu image (meaning that
we can take any container in a registry as a base)
- runs in the hid selftest dir, and such uses the test program from there
- the working directory to store the config is in
tools/selftests/hid/results
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
Adding verifier tests for loading all types od allowed
sleepable programs plus reject for tp_btf type.
Acked-by: Song Liu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"21 hotfixes. Thirteen of these address pre-6.1 issues and hence have
the cc:stable tag"
* tag 'mm-hotfixes-stable-2023-01-16-15-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
init/Kconfig: fix typo (usafe -> unsafe)
nommu: fix split_vma() map_count error
nommu: fix do_munmap() error path
nommu: fix memory leak in do_mmap() error path
MAINTAINERS: update Robert Foss' email address
proc: fix PIE proc-empty-vm, proc-pid-vm tests
mm: update mmap_sem comments to refer to mmap_lock
include/linux/mm: fix release_pages_arg kernel doc comment
lib/win_minmax: use /* notation for regular comments
kasan: mark kasan_kunit_executing as static
nilfs2: fix general protection fault in nilfs_btree_insert()
Docs/admin-guide/mm/zswap: remove zsmalloc's lack of writeback warning
mm/hugetlb: pre-allocate pgtable pages for uffd wr-protects
hugetlb: unshare some PMDs when splitting VMAs
mm: fix vma->anon_name memory leak for anonymous shmem VMAs
mm/shmem: restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE
mm/MADV_COLLAPSE: don't expand collapse when vm_end is past requested end
mm/userfaultfd: enable writenotify while userfaultfd-wp is enabled for a VMA
mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma
mm/hugetlb: fix uffd-wp handling for migration entries in hugetlb_change_protection()
...
|
|
Pable Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Increase timeout to 120 seconds for netfilter selftests to fix
nftables transaction tests, from Florian Westphal.
2) Fix overflow in bitmap_ip_create() due to integer arithmetics
in a 64-bit bitmask, from Gavrilov Ilia.
3) Fix incorrect arithmetics in nft_payload with double-tagged
vlan matching.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add ipip6 and ip6ip decap testcases. Verify that bpf_skb_adjust_room()
correctly decapsulate ipip6 and ip6ip tunnel packets.
Signed-off-by: Ziyang Xuan <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/dfd2d8cfdf9111bd129170d4345296f53bee6a67.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"memblock: always release pages to the buddy allocator in
memblock_free_late()
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the
deferred init process.
memblock_free_pages() is called by memblock_free_late(), which is used
to free reserved ranges after memblock_free_all() has run. All pages
in reserved ranges have been initialized at that point, and
accordingly, those pages are not touched by the deferred init process.
This means that currently, if the pages that memblock_free_late()
intends to release are in the deferred range, they will never be
released to the buddy allocator. They will forever be reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call
__free_pages_core() directly instead.
One case where this issue can occur in the wild is EFI boot on x86_64.
The x86 EFI code reserves all EFI boot services memory ranges via
memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively).
If any of those ranges happens to fall within the deferred init range,
the pages will not be released and that memory will be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages"
* tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: Always release pages to the buddy allocator in memblock_free_late().
|
|
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.
Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.
Cc: [email protected] # v5.19+
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the missing space after 'dest' variable assignment.
This change will resolve the following checkpatch.pl
script error:
ERROR: spaces required around that '+=' (ctx:VxW)
Signed-off-by: Roberto Valenzuela <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
overlayfs may be disabled in the kernel configuration, causing related
tests to fail. Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.
Signed-off-by: Jeff Xu <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <[email protected]>
|
|
drivers/net/usb/r8152.c
be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit")
ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
|
|
We are missing a ) when we attempt to complain about not having enough
configuration for clang, resulting in the rather inscrutable error:
../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop.
Add the required ) so we print the message we were trying to print.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The BTI selftests are built both with and without BTI support, validating
both the generation of BTI signals as expected for binaries without BTI
support. Both versions of the binary currently skip all their tests when
the system does not support BTI, however this is excessive since we do have
a defined ABI for how the programs should function in this case (especially
for the non-BTI binary). Update the test program to run all the tests
unconditionally, adding a runtime adjustment of the expected results on
systems that don't support BTI where we currently handle the build time
case.
The tests all use HINT space instructions, BTI itself is a HINT as is
are the PAC instructions that function as landing pads, so nothing in the
tests depends on support for BTI in the kernel or hardware.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently when skipping tests in the BTI testsuite we assign the same
number to every test since we forget to increment the current test number
as we skip, causing warnings about not running the expected test count and
potentially otherwise confusing result parsers. Fix this by adding an
appropriate increment.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm
will be making a retroactive change to SVE to remove the possibility of
selecting non power of two vector lengths. This has no impact on existing
physical implementations but most virtual implementations have implemented
the full range of permissible vector lengths. Given how demanding fp-stress
is for these implementations update to only attempt to enumerate the power
of two vector lengths, reducing the load created on existing virtual
implementations and only exercising the functionality that will be seen in
physical implementations.
[1] https://developer.arm.com/documentation/102105/ia-00/
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm
will be making a retroactive change to SVE to remove the possibility of
selecting non power of two vector lengths. This has no impact on existing
physical implementations but most virtual implementations have implemented
the full range of permissible vector lengths.
Since virtual implementations are noticeably slow in general and the larger
vector lengths amplify the issue there's a useful improvement in runtime
from only covering the vector lengths that will exist in practical systems,
adjust our enumeration accordingly. We have other tests that aim to cover
the enumeration interfaces.
For symmetry we apply the same change to the eumeration for SME vector
lengths, though the power of two restriction was already present for SME
so there is no impact on the set of vector lengths tested.
[1] https://developer.arm.com/documentation/102105/ia-00/
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently syscall-abi only covers SME in the case where the system supports
SVE however it is architecturally valid to support SME without SVE. Update
the program to cover this case, this requires adjustments in the code to
check for SVCR.SM being set when deciding if we're handling the FPSIMD or
SVE registers and the addition of new test cases for the SME only case.
Note that in the SME only case we should not save the SVE registers after a
syscall since even if we were in streaming mode and therefore set them the
syscall should have exited streaming mode, we check that we have done so by
looking at SVCR.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently syscall-abi not only enumerates the SVE VLs twice while working
out how many tests are planned, it also repeats the enumeration process
while doing the actual tests. Record the VLs when we enumerate and use that
list when we are performing the tests, removing some duplicated logic.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
SME does not mandate any specific VL so we may not have 128 bit SME but
the algorithm used for enumerating VLs assumes that we will. Add the
required check to ensure that the algorithm terminates.
Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
This adds utility to check vsock rx/tx performance.
Usage as sender:
./vsock_perf --sender <cid> --port <port> --bytes <bytes to send>
Usage as receiver:
./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT>
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This adds test for sending message, bigger than peer's buffer size.
For SOCK_SEQPACKET socket it must fail, as this type of socket has
message size limit.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This updates message bound test making it more complex. Instead of
sending 1 bytes messages with one MSG_EOR bit, it sends messages of
random length(one half of messages are smaller than page size, second
half are bigger) with random number of MSG_EOR bits set. Receiver
also don't know total number of messages.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The mm_numa_cid related rseq patches from the series were not picked up
into the tip tree, so enabling the mm_numa_cid test needs to be
reverted.
This reverts commit b344b8f2d88dbf095caf97ac57fd3645843fa70f.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/oe-lkp/[email protected]
|
|
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Automatically restore the default packet stream if needed at the end
of each test. This so that test writers do not forget to do this.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Make the thread dispatching code common by unifying the dual and
single thread dispatcher code. This so we do not have to add code in
two places in upcoming commits.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|