aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2023-01-24KVM: selftests: x86: Use "this_cpu" prefix for cpu vendor queriesVishal Annapurve6-33/+30
Replace is_intel/amd_cpu helpers with this_cpu_* helpers to better convey the intent of querying vendor of the current cpu. Suggested-by: Sean Christopherson <[email protected]> Reviewed-by: David Matlack <[email protected]> Signed-off-by: Vishal Annapurve <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-01-24KVM: selftests: Fix a typo in the vcpu_msrs_set assertAaron Lewis1-1/+1
The assert incorrectly identifies the ioctl being called. Switch it from KVM_GET_MSRS to KVM_SET_MSRS. Fixes: 6ebfef83f03f ("KVM: selftest: Add proper helpers for x86-specific save/restore ioctls") Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-01-24KVM: selftests: kvm_vm_elf_load() and elfhdr_get() should close fdReiji Watanabe1-0/+2
kvm_vm_elf_load() and elfhdr_get() open one file each, but they never close the opened file descriptor. If a test repeatedly creates and destroys a VM with __vm_create(), which (directly or indirectly) calls those two functions, the test might end up getting a open failure with EMFILE. Fix those two functions to close the file descriptor. Signed-off-by: Reiji Watanabe <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-01-24KVM: selftests: Test masked events in PMU filterAaron Lewis1-2/+336
Add testing to show that a pmu event can be filtered with a generalized match on it's unit mask. These tests set up test cases to demonstrate various ways of filtering a pmu event that has multiple unit mask values. It does this by setting up the filter in KVM with the masked events provided, then enabling three pmu counters in the guest. The test then verifies that the pmu counters agree with which counters should be counting and which counters should be filtered for both a sparse filter list and a dense filter list. Signed-off-by: Aaron Lewis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-01-24KVM: selftests: Add testing for KVM_SET_PMU_EVENT_FILTERAaron Lewis1-0/+36
Test that masked events are not using invalid bits, and if they are, ensure the pmu event filter is not accepted by KVM_SET_PMU_EVENT_FILTER. The only valid bits that can be used for masked events are set when using KVM_PMU_ENCODE_MASKED_ENTRY() with one exception: If any of the high bits (35:32) of the event select are set when using Intel, the pmu event filter will fail. Also, because validation was not being done prior to the introduction of masked events, only expect validation to fail when masked events are used. E.g. in the first test a filter event with all its bits set is accepted by KVM_SET_PMU_EVENT_FILTER when flags = 0. Signed-off-by: Aaron Lewis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-01-24KVM: selftests: Add flags when creating a pmu event filterAaron Lewis1-4/+5
Now that the flags field can be non-zero, pass it in when creating a pmu event filter. This is needed in preparation for testing masked events. No functional change intended. Signed-off-by: Aaron Lewis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>
2023-01-24Merge branch 'kvm-v6.2-rc4-fixes' into HEADPaolo Bonzini15-7/+394
ARM: * Fix the PMCR_EL0 reset value after the PMU rework * Correctly handle S2 fault triggered by a S1 page table walk by not always classifying it as a write, as this breaks on R/O memslots * Document why we cannot exit with KVM_EXIT_MMIO when taking a write fault from a S1 PTW on a R/O memslot * Put the Apple M2 on the naughty list for not being able to correctly implement the vgic SEIS feature, just like the M1 before it * Reviewer updates: Alex is stepping down, replaced by Zenghui x86: * Fix various rare locking issues in Xen emulation and teach lockdep to detect them * Documentation improvements * Do not return host topology information from KVM_GET_SUPPORTED_CPUID
2023-01-24act_mirred: use the backlog for nested calls to mirred ingressDavide Caratti1-1/+48
William reports kernel soft-lockups on some OVS topologies when TC mirred egress->ingress action is hit by local TCP traffic [1]. The same can also be reproduced with SCTP (thanks Xin for verifying), when client and server reach themselves through mirred egress to ingress, and one of the two peers sends a "heartbeat" packet (from within a timer). Enqueueing to backlog proved to fix this soft lockup; however, as Cong noticed [2], we should preserve - when possible - the current mirred behavior that counts as "overlimits" any eventual packet drop subsequent to the mirred forwarding action [3]. A compromise solution might use the backlog only when tcf_mirred_act() has a nest level greater than one: change tcf_mirred_forward() accordingly. Also, add a kselftest that can reproduce the lockup and verifies TC mirred ability to account for further packet drops after TC mirred egress->ingress (when the nest level is 1). [1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/ [2] https://lore.kernel.org/netdev/Y0w%[email protected]/ [3] such behavior is not guaranteed: for example, if RPS or skb RX timestamping is enabled on the mirred target device, the kernel can defer receiving the skb and return NET_RX_SUCCESS inside tcf_mirred_forward(). Reported-by: William Zhao <[email protected]> CC: Xin Long <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Reviewed-by: Marcelo Ricardo Leitner <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-23selftests: net: tcp_mmap: populate pages in send pathEric Dumazet1-1/+2
In commit 72653ae5303c ("selftests: net: tcp_mmap: Use huge pages in send path") I made a change to use hugepages for the buffer used by the client (tx path) Today, I understood that the cause for poor zerocopy performance was that after a mmap() for a 512KB memory zone, kernel uses a single zeropage, mapped 128 times. This was really the reason for poor tx path performance in zero copy mode, because this zero page refcount is under high pressure, especially when TCP ACK packets are processed on another cpu. We need either to force a COW on all the memory range, or use MAP_POPULATE so that a zero page is not abused. Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-23selftests/bpf: Add 6-argument syscall tracing testAndrii Nakryiko2-0/+43
Turns out splice() is one of the syscalls that's using current maximum number of arguments (six). This is perfect for testing, so extend bpf_syscall_macro selftest to also trace splice() syscall, using BPF_KSYSCALL() macro. This makes sure all the syscall argument register definitions are correct. Suggested-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Alan Maguire <[email protected]> # arm64 Tested-by: Ilya Leoshkevich <[email protected]> # s390x Link: https://lore.kernel.org/bpf/[email protected]
2023-01-23selftests/bpf: Validate arch-specific argument registers limitsAndrii Nakryiko3-7/+99
Update uprobe_autoattach selftest to validate architecture-specific argument passing through registers. Use new BPF_UPROBE and BPF_URETPROBE, and construct both BPF-side and user-space side in such a way that for different architectures we are fetching and checking different number of arguments, matching architecture-specific limit of how many registers are available for argument passing. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Alan Maguire <[email protected]> # arm64 Tested-by: Ilya Leoshkevich <[email protected]> # s390x Link: https://lore.kernel.org/bpf/[email protected]
2023-01-23selftests/bpf: Use __failure macro in task kfunc testsuiteDavid Vernet2-70/+19
In commit 537c3f66eac1 ("selftests/bpf: add generic BPF program tester-loader"), a new mechanism was added to the BPF selftest framework to allow testsuites to use macros to define expected failing testcases. This allows any testsuite which tests verification failure to remove a good amount of boilerplate code. This patch updates the task_kfunc selftest suite to use these new macros. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-01-23selftests: iommu: Fix test_cmd_destroy_access() call in user_copyNicolin Chen1-1/+1
The test_cmd_destroy_access() should end with a semicolon, so add one. There is a test_ioctl_destroy(ioas_id) following already, so drop one. Fixes: 57f0988706fe ("iommufd: Add a selftest") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Nicolin Chen <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2023-01-23selftests/bpf: Simple program to dump XDP RX metadataStanislav Fomichev4-1/+491
To be used for verification of driver implementations. Note that the skb path is gone from the series, but I'm still keeping the implementation for any possible future work. $ xdp_hw_metadata <ifname> On the other machine: $ echo -n xdp | nc -u -q1 <target> 9091 # for AF_XDP $ echo -n skb | nc -u -q1 <target> 9092 # for skb Sample output: # xdp xsk_ring_cons__peek: 1 0x19f9090: rx_desc[0]->addr=100000000008000 addr=8100 comp_addr=8000 rx_timestamp_supported: 1 rx_timestamp: 1667850075063948829 0x19f9090: complete idx=8 addr=8000 # skb found skb hwtstamp = 1668314052.854274681 Decoding: # xdp rx_timestamp=1667850075.063948829 $ date -d @1667850075 Mon Nov 7 11:41:15 AM PST 2022 $ date Mon Nov 7 11:42:05 AM PST 2022 # skb $ date -d @1668314052 Sat Nov 12 08:34:12 PM PST 2022 $ date Sat Nov 12 08:37:06 PM PST 2022 Cc: John Fastabend <[email protected]> Cc: David Ahern <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Cc: Anatoly Burakov <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: Magnus Karlsson <[email protected]> Cc: Maryam Tahhan <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-01-23selftests/bpf: Verify xdp_metadata xdp->af_xdp pathStanislav Fomichev6-1/+514
- create new netns - create veth pair (veTX+veRX) - setup AF_XDP socket for both interfaces - attach bpf to veRX - send packet via veTX - verify the packet has expected metadata at veRX Cc: John Fastabend <[email protected]> Cc: David Ahern <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Cc: Anatoly Burakov <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: Magnus Karlsson <[email protected]> Cc: Maryam Tahhan <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-01-23selftests/bpf: Update expected test_offload.py messagesStanislav Fomichev1-5/+5
Generic check has a different error message, update the selftest. Cc: John Fastabend <[email protected]> Cc: David Ahern <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Cc: Anatoly Burakov <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: Magnus Karlsson <[email protected]> Cc: Maryam Tahhan <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-01-22KVM: selftests: Make reclaim_period_ms input always be positiveVipin Sharma1-1/+1
reclaim_period_ms used to be positive only but the commit 0001725d0f9b ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation") incorrectly changed it to non-negative validation. Change validation to allow only positive input. Fixes: 0001725d0f9b ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation") Signed-off-by: Vipin Sharma <[email protected]> Reported-by: Ben Gardon <[email protected]> Reviewed-by: Ben Gardon <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-01-22selftests: kvm: move declaration at the beginning of main()Paolo Bonzini1-4/+3
Placing a declaration of evt_reset is pedantically invalid according to the C standard. While GCC does not really care and only warns with -Wpedantic, clang ignores the declaration altogether with an error: x86_64/xen_shinfo_test.c:965:2: error: expected expression struct kvm_xen_hvm_attr evt_reset = { ^ x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset); ^ Reported-by: Yu Zhang <[email protected]> Reported-by: Sean Christopherson <[email protected]> Fixes: a79b53aaaab5 ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28) Signed-off-by: Paolo Bonzini <[email protected]>
2023-01-20selftests/bpf: Add dynptr helper testsKumar Kartikeya Dwivedi1-0/+192
First test that we allow overwriting dynptr slots and reinitializing them in unreferenced case, and disallow overwriting for referenced case. Include tests to ensure slices obtained from destroyed dynptrs are being invalidated on their destruction. The destruction needs to be scoped, as in slices of dynptr A should not be invalidated when dynptr B is destroyed. Next, test that MEM_UNINIT doesn't allow writing dynptr stack slots. Acked-by: Joanne Koong <[email protected]> Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20selftests/bpf: Add dynptr partial slot overwrite testsKumar Kartikeya Dwivedi1-0/+66
Try creating a dynptr, then overwriting second slot with first slot of another dynptr. Then, the first slot of first dynptr should also be invalidated, but without our fix that does not happen. As a consequence, the unfixed case allows passing first dynptr (as the kernel check only checks for slot_type and then first_slot == true). Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20selftests/bpf: Add dynptr var_off testsKumar Kartikeya Dwivedi1-0/+40
Ensure that variable offset is handled correctly, and verifier takes both fixed and variable part into account. Also ensures that only constant var_off is allowed. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20selftests/bpf: Add dynptr pruning testsKumar Kartikeya Dwivedi1-0/+141
Add verifier tests that verify the new pruning behavior for STACK_DYNPTR slots, and ensure that state equivalence takes into account changes to the old and current verifier state correctly. Also ensure that the stacksafe changes are actually enabling pruning in case states are equivalent from pruning PoV. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20selftests/bpf: convenience macro for use with 'asm volatile' blocksEduard Zingerman1-0/+7
A set of macros useful for writing naked BPF functions using inline assembly. E.g. as follows: struct map_struct { ... } map SEC(".maps"); SEC(...) __naked int foo_test(void) { asm volatile( "r0 = 0;" "*(u64*)(r10 - 8) = r0;" "r1 = %[map] ll;" "r2 = r10;" "r2 += -8;" "call %[bpf_map_lookup_elem];" "r0 = 0;" "exit;" : : __imm(bpf_map_lookup_elem), __imm_addr(map) : __clobber_all); } Acked-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Eduard Zingerman <[email protected]> [ Kartikeya: Add acks, include __clobber_common from Andrii ] Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20bpf: Invalidate slices on destruction of dynptrs on stackKumar Kartikeya Dwivedi1-2/+2
The previous commit implemented destroy_if_dynptr_stack_slot. It destroys the dynptr which given spi belongs to, but still doesn't invalidate the slices that belong to such a dynptr. While for the case of referenced dynptr, we don't allow their overwrite and return an error early, we still allow it and destroy the dynptr for unreferenced dynptr. To be able to enable precise and scoped invalidation of dynptr slices in this case, we must be able to associate the source dynptr of slices that have been obtained using bpf_dynptr_data. When doing destruction, only slices belonging to the dynptr being destructed should be invalidated, and nothing else. Currently, dynptr slices belonging to different dynptrs are indistinguishible. Hence, allocate a unique id to each dynptr (CONST_PTR_TO_DYNPTR and those on stack). This will be stored as part of reg->id. Whenever using bpf_dynptr_data, transfer this unique dynptr id to the returned PTR_TO_MEM_OR_NULL slice pointer, and store it in a new per-PTR_TO_MEM dynptr_id register state member. Finally, after establishing such a relationship between dynptrs and their slices, implement precise invalidation logic that only invalidates slices belong to the destroyed dynptr in destroy_if_dynptr_stack_slot. Acked-by: Joanne Koong <[email protected]> Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20bpf: Fix partial dynptr stack slot reads/writesKumar Kartikeya Dwivedi1-3/+3
Currently, while reads are disallowed for dynptr stack slots, writes are not. Reads don't work from both direct access and helpers, while writes do work in both cases, but have the effect of overwriting the slot_type. While this is fine, handling for a few edge cases is missing. Firstly, a user can overwrite the stack slots of dynptr partially. Consider the following layout: spi: [d][d][?] 2 1 0 First slot is at spi 2, second at spi 1. Now, do a write of 1 to 8 bytes for spi 1. This will essentially either write STACK_MISC for all slot_types or STACK_MISC and STACK_ZERO (in case of size < BPF_REG_SIZE partial write of zeroes). The end result is that slot is scrubbed. Now, the layout is: spi: [d][m][?] 2 1 0 Suppose if user initializes spi = 1 as dynptr. We get: spi: [d][d][d] 2 1 0 But this time, both spi 2 and spi 1 have first_slot = true. Now, when passing spi 2 to dynptr helper, it will consider it as initialized as it does not check whether second slot has first_slot == false. And spi 1 should already work as normal. This effectively replaced size + offset of first dynptr, hence allowing invalid OOB reads and writes. Make a few changes to protect against this: When writing to PTR_TO_STACK using BPF insns, when we touch spi of a STACK_DYNPTR type, mark both first and second slot (regardless of which slot we touch) as STACK_INVALID. Reads are already prevented. Second, prevent writing to stack memory from helpers if the range may contain any STACK_DYNPTR slots. Reads are already prevented. For helpers, we cannot allow it to destroy dynptrs from the writes as depending on arguments, helper may take uninit_mem and dynptr both at the same time. This would mean that helper may write to uninit_mem before it reads the dynptr, which would be bad. PTR_TO_MEM: [?????dd] Depending on the code inside the helper, it may end up overwriting the dynptr contents first and then read those as the dynptr argument. Verifier would only simulate destruction when it does byte by byte access simulation in check_helper_call for meta.access_size, and fail to catch this case, as it happens after argument checks. The same would need to be done for any other non-trivial objects created on the stack in the future, such as bpf_list_head on stack, or bpf_rb_root on stack. A common misunderstanding in the current code is that MEM_UNINIT means writes, but note that writes may also be performed even without MEM_UNINIT in case of helpers, in that case the code after handling meta && meta->raw_mode will complain when it sees STACK_DYNPTR. So that invalid read case also covers writes to potential STACK_DYNPTR slots. The only loophole was in case of meta->raw_mode which simulated writes through instructions which could overwrite them. A future series sequenced after this will focus on the clean up of helper access checks and bugs around that. Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs") Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20bpf: Fix missing var_off check for ARG_PTR_TO_DYNPTRKumar Kartikeya Dwivedi2-3/+3
Currently, the dynptr function is not checking the variable offset part of PTR_TO_STACK that it needs to check. The fixed offset is considered when computing the stack pointer index, but if the variable offset was not a constant (such that it could not be accumulated in reg->off), we will end up a discrepency where runtime pointer does not point to the actual stack slot we mark as STACK_DYNPTR. It is impossible to precisely track dynptr state when variable offset is not constant, hence, just like bpf_timer, kptr, bpf_spin_lock, etc. simply reject the case where reg->var_off is not constant. Then, consider both reg->off and reg->var_off.value when computing the stack pointer index. A new helper dynptr_get_spi is introduced to hide over these details since the dynptr needs to be located in multiple places outside the process_dynptr_func checks, hence once we know it's a PTR_TO_STACK, we need to enforce these checks in all places. Note that it is disallowed for unprivileged users to have a non-constant var_off, so this problem should only be possible to trigger from programs having CAP_PERFMON. However, its effects can vary. Without the fix, it is possible to replace the contents of the dynptr arbitrarily by making verifier mark different stack slots than actual location and then doing writes to the actual stack address of dynptr at runtime. Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs") Acked-by: Joanne Koong <[email protected]> Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-21/+80
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-20Merge tag 'linux-kselftest-fixes-6.2-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "Fix an error seen during unconfigured LLVM builds" * tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Fix error message for unconfigured LLVM builds
2023-01-20Merge tag 'net-6.2-rc5-2' of ↵Linus Torvalds4-12/+64
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bluetooth, bpf and netfilter. Current release - regressions: - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf", fix nsna_ping mode of team - wifi: mt76: fix bugs in Rx queue handling and DMA mapping - eth: mlx5: - add missing mutex_unlock in error reporter - protect global IPsec ASO with a lock Current release - new code bugs: - rxrpc: fix wrong error return in rxrpc_connect_call() Previous releases - regressions: - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2 - wifi: - mac80211: fix crashes on Rx due to incorrect initialization of rx->link and rx->link_sta - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect aggregation handling, crashes - brcmfmac: fix regression for Broadcom PCIe wifi devices - rndis_wlan: prevent buffer overflow in rndis_query_oid - netfilter: conntrack: handle tcp challenge acks during connection reuse - sched: avoid grafting on htb_destroy_class_offload when destroying - virtio-net: correctly enable callback during start_xmit, fix stalls - tcp: avoid the lookup process failing to get sk in ehash table - ipa: disable ipa interrupt during suspend - eth: stmmac: enable all safety features by default Previous releases - always broken: - bpf: - fix pointer-leak due to insufficient speculative store bypass mitigation (Spectre v4) - skip task with pid=1 in send_signal_common() to avoid a splat - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events - fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index - bluetooth: - fix a buffer overflow in mgmt_mesh_add() - hci_qca: fix driver shutdown on closed serdev - ISO: fix possible circular locking dependency - CIS: hci_event: fix invalid wait context - wifi: brcmfmac: fixes for survey dump handling - mptcp: explicitly specify sock family at subflow creation time - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits - tcp: fix rate_app_limited to default to 1 - l2tp: close all race conditions in l2tp_tunnel_register() - eth: mlx5: fixes for QoS config and eswitch configuration - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp() - eth: stmmac: fix invalid call to mdiobus_get_phy() Misc: - ethtool: add netlink attr in rss get reply only if the value is not empty" * tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) Revert "Merge branch 'octeontx2-af-CPT'" tcp: fix rate_app_limited to default to 1 bnxt: Do not read past the end of test names net: stmmac: enable all safety features by default octeontx2-af: add mbox to return CPT_AF_FLT_INT info octeontx2-af: update cpt lf alloc mailbox octeontx2-af: restore rxc conf after teardown sequence octeontx2-af: optimize cpt pf identification octeontx2-af: modify FLR sequence for CPT octeontx2-af: add mbox for CPT LF reset octeontx2-af: recover CPT engine when it gets fault net: dsa: microchip: ksz9477: port map correction in ALU table entry register selftests/net: toeplitz: fix race on tpacket_v3 block close net/ulp: use consistent error code when blocking ULP octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt tcp: avoid the lookup process failing to get sk in ehash table Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf" MAINTAINERS: add networking entries for Willem net: sched: gred: prevent races when adding offloads to stats l2tp: prevent lockdep issue in l2tp_tunnel_register() ...
2023-01-20kselftest/arm64: Correct buffer size for SME ZA storageZenghui Yu1-2/+2
It looks like a copy-paste error to describe the ZA buffer size using (the number of P registers * the maximum size of a Z register). This doesn't have practical impact though as we're always allocating enough space even for the architectural maximum ZA storage, with SVL equals to 2048 bits. Switch to use ZA_SIG_REGS_SIZE(SVE_VQ_MAX). setup_za() will need to initialize two 64MB arraies with this change and can be optimized later (if someone complain). Signed-off-by: Zenghui Yu <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Remove the local NUM_VL definitionZenghui Yu1-2/+0
It was introduced in commit b77e995e3b96 ("kselftest/arm64: Add a test program to exercise the syscall ABI") but never actually used. Remove it. Signed-off-by: Zenghui Yu <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Verify simultaneous SSVE and ZA context generationMark Brown1-0/+162
Add a test that generates SSVE and ZA context in a single signal frame to ensure that nothing is going wrong in that case for any reason. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM setMark Brown1-0/+5
Streaming mode SVE signal context should have SVE_SIG_FLAG_SM set but we were not actually validating this. Add a check. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Remove spurious comment from MTE test MakefileMark Brown1-1/+0
There's a stray comment in the MTE test Makefile which documents something that's since been removed, delete it. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Support build of MTE tests with clangMark Brown1-5/+15
The assembly portions of the MTE selftests need to be built with a toolchain supporting MTE. Since we support GCC versions that lack MTE support we have logic to suppress build of these tests when using such a toolchain but that logic is broken for LLVM=1 builds, it uses CC but CC is only set for LLVM builds in libs.mk which needs to be included after we have selected which test programs to build. Since all supported LLVM versions support MTE we can simply assume MTE support when LLVM is set. This is not a thing of beauty but it does the job. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Initialise current at build time in signal testsMark Brown1-3/+1
When building with clang the toolchain refuses to link the signals testcases since the assembly code has a reference to current which has no initialiser so is placed in the BSS: /tmp/signals-af2042.o: in function `fake_sigreturn': <unknown>:51:(.text+0x40): relocation truncated to fit: R_AARCH64_LD_PREL_LO19 against symbol `current' defined in .bss section in /tmp/test_signals-ec1160.o Since the first statement in main() initialises current we may as well fix this by moving the initialisation to build time so the variable doesn't end up in the BSS. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Don't pass headers to the compiler as sourceMark Brown1-2/+6
The signal Makefile rules pass all the dependencies for each executable, including headers, to the compiler which GCC is happy enough with but clang rejects: clang --target=aarch64-none-linux-gnu -fintegrated-as -Wall -O2 -g -I/home/broonie/git/linux/tools/testing/selftests/ -isystem /home/broonie/git/linux/usr/include -D_GNU_SOURCE -std=gnu99 -I. test_signals.c test_signals_utils.c testcases/testcases.c signals.S testcases/fake_sigreturn_bad_magic.c test_signals.h test_signals_utils.h testcases/testcases.h -o testcases/fake_sigreturn_bad_magic clang: error: cannot specify -o when generating multiple output files This happens because clang gets confused about what to do with the header files, failing to identify them as source. This is not amazing behaviour on clang's part and should ideally be fixed but even if that happens we'd still need a new clang release so let's instead rework the Makefile so we use variables for the lists of header and source files, allowing us to only pass the source files to the compiler and keep clang happy. As a bonus the resulting Makefile is a bit easier to read. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Remove redundant _start labels from FP testsMark Brown4-4/+0
There are a number of freestanding static executables used in floating point testing that have no runtime at all. These all define the main entry point as: .globl _start function _start _start: but clang's integrated assembler complains that: error: symbol '_start' is already defined due to having both a label and function directive. Remove the label to allow building with clang. No functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Fix .pushsection for strings in FP testsMark Brown1-1/+1
The .pushsection directive used to store the strings used with the .puts macro in the floating point helpers does not provide a section type but according to the gas documentation this should be mandatory and with the clang built in as it actually is. Provide one so that we can build these tests with LLVM=1. No functional change. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add test case for TPIDR2 signal frame recordsMark Brown2-0/+91
Ensure that we get signal context for TPIDR2 if and only if SME is present on the system. Since TPIDR2 is owned by libc we merely validate that the value is whatever it was set to, this isn't ideal since it's likely to just be the default of 0 with current systems but it avoids future false positives. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add TPIDR2 to the set of known signal context recordsMark Brown1-0/+4
When validating the set of signal context records check that any TPIDR2 record has the correct size, also suppressing warnings due to seeing an unknown record type. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add coverage of SME 2 and 2.1 hwcapsMark Brown1-0/+115
Add the hwcaps defined by SME 2 and 2.1 to the hwcaps test. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add coverage of the ZT ptrace regsetMark Brown3-0/+368
Add coverage of the ZT ptrace interface. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add SME2 coverage to syscall-abiMark Brown2-3/+80
Verify that ZT0 is preserved over syscalls when it is present and PSTATE.ZA is set. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add test coverage for ZT register signal framesMark Brown3-0/+137
We should have a ZT register frame with an expected size when ZA is enabled and have no ZT frame when ZA is disabled. Since we don't load any data into ZT we expect the data to all be zeros since the architecture guarantees it will be set to 0 as ZA is enabled. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Teach the generic signal context validation about ZTMark Brown2-0/+37
Add ZT to the set of signal contexts that the shared code understands and validates the form of. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Enumerate SME2 in the signal test utility codeMark Brown2-0/+5
Support test cases for SME2 by adding it to the set of features that we enumerate so test cases can check for it. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Cover ZT in the FP stress testMark Brown1-2/+27
Hook up the newly added zt-test program in the FPSIMD stress tests, start a copy per CPU when SME2 is supported. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-20kselftest/arm64: Add a stress test program for ZT0Mark Brown4-0/+341
Following the pattern for the other register sets add a stress test program for ZT0 which continually loads and verifies patterns in the register in an effort to discover context switching problems. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-19selftests/filesystems: grant executable permission to run_fat_tests.shPengfei Xu1-0/+0
When use tools/testing/selftests/kselftest_install.sh to make the kselftest-list.txt under tools/testing/selftests/kselftest_install. Then use tools/testing/selftests/kselftest_install/run_kselftest.sh to run all the kselftests in kselftest-list.txt, it will be blocked by case "filesystems/fat: run_fat_tests.sh" with "Warning: file run_fat_tests.sh is not executable", so grant executable permission to run_fat_tests.sh to fix this issue. Link: https://lkml.kernel.org/r/dfdbba6df8a1ab34bb1e81cd8bd7ca3f9ed5c369.1673424747.git.pengfei.xu@intel.com Fixes: dd7c9be330d8 ("selftests/filesystems: add a vfat RENAME_EXCHANGE test") Signed-off-by: Pengfei Xu <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.