| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add function setup_numa_memblock() for setting up a memory layout with
multiple NUMA nodes in a previously allocated dummy physical memory.
This function can be used in place of setup_memblock() in tests that need
to simulate a NUMA system.
setup_numa_memblock():
- allows for setting up a memory layout by specifying the fraction of
MEM_SIZE in each node
Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to
16 NUMA nodes.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
|
|
Move variable declarations to a single block at the beginning of each
testing function.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/e61431e73977f305fdd027bca99d1dc119e96d84.1662264355.git.remckee0@gmail.com
|
|
The tests in alloc_nid_api can now run either memblock_alloc_try_nid()
or memblock_alloc_try_nid_raw(). The comment blocks for these tests
should not refer to a 'cleared' region since that only applies to
memblock_alloc_try_nid(). Remove 'cleared' from the comment blocks so
that the comments are accurate for either memblock function.
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/e8be24137e54e9f81a06af969ded82b319114d7a.1662264347.git.remckee0@gmail.com
|
|
Add tests for memblock_trim_memory() for the following scenarios:
- all regions aligned
- one unaligned region that is smaller than the alignment
- one unaligned region that is unaligned at the base
- one unaligned region that is unaligned at the end
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/0e5f55154a3b66581e04ba3717978795cbc08a5b.1661578349.git.remckee0@gmail.com
|
|
Add simple tests for memblock_set_bottom_up() and memblock_bottom_up().
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/b03701d2faeaf00f7184e4b72903de4e5e939437.1661578349.git.remckee0@gmail.com
|
|
Update memblock_alloc_try_nid() tests so that they test either
memblock_alloc_try_nid() or memblock_alloc_try_nid_raw() depending on the
value of alloc_nid_test_flags. Run through all the existing tests in
alloc_nid_api twice: once for memblock_alloc_try_nid() and once for
memblock_alloc_try_nid_raw().
When the tests run memblock_alloc_try_nid(), they test that the entire
memory region is zero. When the tests run memblock_alloc_try_nid_raw(),
they test that the entire memory region is nonzero. The content of the
memory region is initialized to nonzero, and we expect it to remain
unchanged if running memblock_alloc_try_nid_raw().
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/6fa8938f67872841c10a00afb042947d1d280a04.1661578349.git.remckee0@gmail.com
|
|
Update memblock_alloc() tests so that they test either memblock_alloc()
or memblock_alloc_raw() depending on the value of alloc_test_flags. Run
through all the existing tests in memblock_alloc_api twice: once for
memblock_alloc() and once for memblock_alloc_raw().
When the tests run memblock_alloc(), they test that the entire memory
region is zero. When the tests run memblock_alloc_raw(), they test that
the entire memory region is nonzero. The content of the memory region is
initialized to nonzero, and we expect it to remain unchanged if running
memblock_alloc_raw().
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5a7cfb2f807ee2cb53ee77f9f5c910107b253d6e.1661578349.git.remckee0@gmail.com
|
|
Add tests for memblock_add(), memblock_reserve(), memblock_remove(),
memblock_free(), and memblock_alloc() for the following test scenarios.
memblock_add() and memblock_reserve():
- add/reserve a memory block in the gap between two existing memory
blocks, and check that the blocks are merged into one region
- try to add/reserve memblock regions that extend past PHYS_ADDR_MAX
memblock_remove() and memblock_free():
- remove/free a region when it is the only available region
+ These tests ensure that the first region is overwritten with a
"dummy" region when the last remaining region of that type is
removed or freed.
- remove/free() a region that overlaps with two existing regions of the
relevant type
- try to remove/free memblock regions that extend past PHYS_ADDR_MAX
memblock_alloc():
- try to allocate a region that is larger than the total size of available
memory (memblock.memory)
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/c23c0393c5b9a53fe7f676996913c629495e9727.1661578349.git.remckee0@gmail.com
|
|
Generic tests for memblock_alloc*() functions do not use separate
functions for testing top-down and bottom-up allocation directions.
Therefore, the function name that is displayed in the verbose testing
output does not include the allocation direction.
Add an additional prefix when running generic tests for
memblock_alloc*() functions that indicates which allocation direction is
set. The prefix will be displayed when the tests are run in verbose mode.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/fb76a42253d2a196a7daea29dd8121a69904f58e.1661578349.git.remckee0@gmail.com
|
|
Update the assert in memblock_alloc_try_nid() and memblock_alloc_from()
tests that checks whether the memory is cleared so that it checks the
entire chunk of allocated memory instead of just the first byte.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/24b3271751756100142e65b75284d43b4d30c9b7.1661578349.git.remckee0@gmail.com
|
|
Add an assert in memblock_alloc() tests where allocation is expected to
occur. The assert checks whether the entire chunk of allocated memory is
cleared.
The current memblock_alloc() tests do not check whether the allocated
memory was zeroed. memblock_alloc() should zero the allocated memory since
it is a wrapper for memblock_alloc_try_nid().
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/83ffb941b65074f40eb14552f8bfe5b71fe50abd.1661578349.git.remckee0@gmail.com
|
|
The VERBOSE build option was replaced with the --verbose runtime option,
but the comments describing the ASSERT_*() macros still refer to the
VERBOSE build option. Update these comments so that they refer to the
--verbose runtime option.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5f8a4c2bde34cc029282c68d47eda982d950f421.1660451025.git.remckee0@gmail.com
|
|
Add a help command line option to the help message. Add the help option
to the short and long options so it will be recognized as a valid
option.
Usage:
$ ./main -h
Or:
$ ./main --help
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/0f3b93a79de78c0da1ca90f74fe35e9a85c7cf93.1660451025.git.remckee0@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter (with one broken Fixes tag).
Current release - new code bugs:
- dsa: don't dereference NULL extack in dsa_slave_changeupper()
- dpaa: fix <1G ethernet on LS1046ARDB
- neigh: don't call kfree_skb() under spin_lock_irqsave()
Previous releases - regressions:
- r8152: fix the RX FIFO settings when suspending
- dsa: microchip: keep compatibility with device tree blobs with no
phy-mode
- Revert "net: macsec: update SCI upon MAC address change."
- Revert "xfrm: update SA curlft.use_time", comply with RFC 2367
Previous releases - always broken:
- netfilter: conntrack: work around exceeded TCP receive window
- ipsec: fix a null pointer dereference of dst->dev on a metadata dst
in xfrm_lookup_with_ifid
- moxa: get rid of asymmetry in DMA mapping/unmapping
- dsa: microchip: make learning configurable and keep it off while
standalone
- ice: xsk: prohibit usage of non-balanced queue id
- rxrpc: fix locking in rxrpc's sendmsg
Misc:
- another chunk of sysctl data race silencing"
* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
net: lantiq_xrx200: restore buffer if memory allocation failed
net: lantiq_xrx200: fix lock under memory pressure
net: lantiq_xrx200: confirm skb is allocated before using
net: stmmac: work around sporadic tx issue on link-up
ionic: VF initial random MAC address if no assigned mac
ionic: fix up issues with handling EAGAIN on FW cmds
ionic: clear broken state on generation change
rxrpc: Fix locking in rxrpc's sendmsg
net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
MAINTAINERS: rectify file entry in BONDING DRIVER
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
net: Fix a data-race around sysctl_somaxconn.
net: Fix a data-race around netdev_unregister_timeout_secs.
net: Fix a data-race around gro_normal_batch.
net: Fix data-races around sysctl_devconf_inherit_init_net.
net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
net: Fix a data-race around netdev_budget_usecs.
net: Fix data-races around sysctl_max_skb_frags.
net: Fix a data-race around netdev_budget.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to vm and sgx test builds"
* tag 'linux-kselftest-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vm: fix inability to build any vm tests
selftests/sgx: Ignore OpenSSL 3.0 deprecated functions warning
|
|
This creates a test collection in drivers/net/bonding for bonding
specific kernel selftests.
The first test is a reproducer that provisions a bond and given the
specific order in how the ip-link(8) commands are issued the bond never
transmits an LACPDU frame on any of its slaves.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix atomic sleep warnings at boot due to get_phb_number() taking a
mutex with a spinlock held on some machines.
- Add missing PMU selftests to .gitignores.
Thanks to Guenter Roeck and Russell Currey.
* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add missing PMU selftests to .gitignores
powerpc/pci: Fix get_phb_number() locking
|
|
When we stopped using KSFT_KHDR_INSTALL, a side effect is we also
changed the value of `top_srcdir`. This can be seen by looking at the
code removed by commit 49de12ba06ef
("selftests: drop KSFT_KHDR_INSTALL make target").
(Note though that this commit didn't break this, technically the one
before it did since that's the one that stopped KSFT_KHDR_INSTALL from
being used, even though the code was still there.)
Previously lib.mk reconfigured `top_srcdir` when KSFT_KHDR_INSTALL was
being used. Now, that's no longer the case.
As a result, the path to gup_test.h in vm/Makefile was wrong, and
since it's a dependency of all of the vm binaries none of them could
be built. Instead, we'd get an "error" like:
make[1]: *** No rule to make target
'/[...]/tools/testing/selftests/vm/compaction_test', needed by
'all'. Stop.
So, modify lib.mk so it once again sets top_srcdir to the root of the
kernel tree.
Fixes: f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL")
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
socket maps get data out of the TCP stack)
- tls: rx: react to strparser initialization errors
- netfilter: nf_tables: fix scheduling-while-atomic splat
- net: fix suspicious RCU usage in bpf_sk_reuseport_detach()
Current release - new code bugs:
- mlxsw: ptp: fix a couple of races, static checker warnings and
error handling
Previous releases - regressions:
- netfilter:
- nf_tables: fix possible module reference underflow in error path
- make conntrack helpers deal with BIG TCP (skbs > 64kB)
- nfnetlink: re-enable conntrack expectation events
- net: fix potential refcount leak in ndisc_router_discovery()
Previous releases - always broken:
- sched: cls_route: disallow handle of 0
- neigh: fix possible local DoS due to net iface start/stop loop
- rtnetlink: fix module refcount leak in rtnetlink_rcv_msg
- sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu
- virtio_net: fix endian-ness for RSS
- dsa: mv88e6060: prevent crash on an unused port
- fec: fix timer capture timing in `fec_ptp_enable_pps()`
- ocelot: stats: fix races, integer wrapping and reading incorrect
registers (the change of register definitions here accounts for
bulk of the changed LoC in this PR)"
* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: moxa: MAC address reading, generating, validity checking
tcp: handle pure FIN case correctly
tcp: refactor tcp_read_skb() a bit
tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
tcp: fix sock skb accounting in tcp_read_skb()
igb: Add lock to avoid data race
dt-bindings: Fix incorrect "the the" corrections
net: genl: fix error path memory leak in policy dumping
stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
net/mlx5e: Allocate flow steering storage during uplink initialization
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
net: mscc: ocelot: turn stats_lock into a spinlock
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
...
|
|
Florian Westphal says:
====================
netfilter: conntrack and nf_tables bug fixes
The following patchset contains netfilter fixes for net.
Broken since 5.19:
A few ancient connection tracking helpers assume TCP packets cannot
exceed 64kb in size, but this isn't the case anymore with 5.19 when
BIG TCP got merged, from myself.
Regressions since 5.19:
1. 'conntrack -E expect' won't display anything because nfnetlink failed
to enable events for expectations, only for normal conntrack events.
2. partially revert change that added resched calls to a function that can
be in atomic context. Both broken and fixed up by myself.
Broken for several releases (up to original merge of nf_tables):
Several fixes for nf_tables control plane, from Pablo.
This fixes up resource leaks in error paths and adds more sanity
checks for mutually exclusive attributes/flags.
Kconfig:
NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided
via ctnetlink, so it should not default to y. From Geert Uytterhoeven.
Selftests:
rework nft_flowtable.sh: it frequently indicated failure; the way it
tried to detect an offload failure did not work reliably.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
testing: selftests: nft_flowtable.sh: use random netns names
netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END
netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: really skip inactive sets when allocating name
netfilter: nfnetlink: re-enable conntrack expectation events
netfilter: nf_tables: fix scheduling-while-atomic splat
netfilter: nf_ct_irc: cap packet search space to 4k
netfilter: nf_ct_ftp: prefer skb_linearize
netfilter: nf_ct_h323: cap packet size at 64k
netfilter: nf_ct_sane: remove pseudo skb linearization
netfilter: nf_tables: possible module reference underflow in error path
netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag
netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access
====================
Link: https://lore.kernel.org/r/20220817140015.25843-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test fails on current kernel releases because the flotwable path
now calls dst_check from packet path and will then remove the offload.
Test script has two purposes:
1. check that file (random content) can be sent to other netns (and vv)
2. check that the flow is offloaded (rather than handled by classic
forwarding path).
Since dst_check is in place, 2) fails because the nftables ruleset in
router namespace 1 intentionally blocks traffic under the assumption
that packets are not passed via classic path at all.
Rework this: Instead of blocking traffic, create two named counters, one
for original and one for reverse direction.
The first three test cases are handled by classic forwarding path
(path mtu discovery is disabled and packets exceed MTU).
But all other tests enable PMTUD, so the originator and responder are
expected to lower packet size and flowtable is expected to do the packet
forwarding.
For those tests, check that the packet counters (which are only
incremented for packets that are passed up to classic forward path)
are significantly lower than the file size transferred.
I've tested that the counter-checks fail as expected when the 'flow add'
statement is removed from the ruleset.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
"ns1" is a too generic name, use a random suffix to avoid
errors when such a netns exists. Also allows to run multiple
instances of the script in parallel.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
OpenSSL 3.0 deprecates some of the functions used in the SGX
selftests, causing build errors on new distros. For now ignore
the warnings until support for the functions is no longer
available and mark FIXME so that it can be clear this should
be removed at some point.
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Revert part of the earlier changes to fix the kselftest build when
using a sub-directory from the top of the tree as this broke the
landlock test build as a side-effect when building with "make -C
tools/testing/selftests/landlock".
Reported-by: Mickaël Salaün <mic@digikod.net>
Fixes: a917dd94b832 ("selftests/landlock: drop deprecated headers dependency")
Fixes: f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Some recently added selftests don't have their binaries in .gitignores,
so add them.
I also alphabetically sorted sampling_tests/.gitignore while I was in
there.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220812071632.56095-1-ruscur@russell.cc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
|
|
When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various
configs were updated, but the wireguard config was forgotten about. This
leads to unbootable test kernels, causing CI fails. Add
CONFIG_NONPORTABLE=y to the wireguard test suite configuration for
riscv32.
Fixes: 44c1e84a38a0 ("RISC-V: Add CONFIG_{NON,}PORTABLE")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809145757.83673-1-Jason@zx2c4.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
|
|
Pull more kvm updates from Paolo Bonzini:
- Xen timer fixes
- Documentation formatting fixes
- Make rseq selftest compatible with glibc-2.35
- Fix handling of illegal LEA reg, reg
- Cleanup creation of debugfs entries
- Fix steal time cache handling bug
- Fixes for MMIO caching
- Optimize computation of number of LBRs
- Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: x86/MMU: properly format KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability table
Documentation: KVM: extend KVM_CAP_VM_DISABLE_NX_HUGE_PAGES heading underline
KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
KVM: selftests: Make rseq compatible with glibc-2.35
KVM: Actually create debugfs in kvm_create_vm()
KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
KVM: Get an fd before creating the VM
KVM: Shove vcpu stats_id init into kvm_vcpu_init()
KVM: Shove vm stats_id init into kvm_create_vm()
KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
KVM: x86/mmu: rename trace function name for asynchronous page fault
KVM: x86/xen: Stop Xen timer before changing IRQ
KVM: x86/xen: Initialize Xen timer only once
KVM: SVM: Disable SEV-ES support if MMIO caching is disable
KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
KVM: x86: Tag kvm_mmu_x86_module_init() with __init
...
|
|
The custom multipath hash tests use mausezahn in order to test how
changes in various packet fields affect the packet distribution across
the available nexthops.
The tool uses the libnet library for various low-level packet
construction and injection. The library started using the
"SO_BINDTODEVICE" socket option for IPv6 sockets in version 1.1.6 and
for IPv4 sockets in version 1.2.
When the option is not set, packets are not routed according to the
table associated with the VRF master device and tests fail.
Fix this by prefixing the command with "ip vrf exec", which will cause
the route lookup to occur in the VRF routing table. This makes the tests
pass regardless of the libnet library version.
Fixes: 511e8db54036 ("selftests: forwarding: Add test for custom multipath hash")
Fixes: 185b0c190bb6 ("selftests: forwarding: Add test for custom multipath hash with IPv4 GRE")
Fixes: b7715acba4d3 ("selftests: forwarding: Add test for custom multipath hash with IPv6 GRE")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://lore.kernel.org/r/20220809113320.751413-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
bpf 2022-08-10
We've added 23 non-merge commits during the last 7 day(s) which contain
a total of 19 files changed, 424 insertions(+), 35 deletions(-).
The main changes are:
1) Several fixes for BPF map iterator such as UAFs along with selftests, from Hou Tao.
2) Fix BPF syscall program's {copy,strncpy}_from_bpfptr() to not fault, from Jinghao Jia.
3) Reject BPF syscall programs calling BPF_PROG_RUN, from Alexei Starovoitov and YiFei Zhu.
4) Fix attach_btf_obj_id info to pick proper target BTF, from Stanislav Fomichev.
5) BPF design Q/A doc update to clarify what is not stable ABI, from Paul E. McKenney.
6) Fix BPF map's prealloc_lru_pop to not reinitialize, from Kumar Kartikeya Dwivedi.
7) Fix bpf_trampoline_put to avoid leaking ftrace hash, from Jiri Olsa.
8) Fix arm64 JIT to address sparse errors around BPF trampoline, from Xu Kuohai.
9) Fix arm64 JIT to use kvcalloc instead of kcalloc for internal program address
offset buffer, from Aijun Sun.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
bpf: Check the validity of max_rdwr_access for sock local storage map iterator
bpf: Acquire map uref in .init_seq_private for sock{map,hash} iterator
bpf: Acquire map uref in .init_seq_private for sock local storage map iterator
bpf: Acquire map uref in .init_seq_private for hash map iterator
bpf: Acquire map uref in .init_seq_private for array map iterator
bpf: Disallow bpf programs call prog_run command.
bpf, arm64: Fix bpf trampoline instruction endianness
selftests/bpf: Add test for prealloc_lru_pop bug
bpf: Don't reinit map value in prealloc_lru_pop
bpf: Allow calling bpf_prog_test kfuncs in tracing programs
bpf, arm64: Allocate program buffer using kvcalloc instead of kcalloc
selftests/bpf: Excercise bpf_obj_get_info_by_fd for bpf2bpf
bpf: Use proper target btf when exporting attach_btf_obj_id
mptcp, btf: Add struct mptcp_sock definition when CONFIG_MPTCP is disabled
bpf: Cleanup ftrace hash in bpf_trampoline_put
BPF: Fix potential bad pointer dereference in bpf_sys_bpf()
...
====================
Link: https://lore.kernel.org/r/20220810190624.10748-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test all possible input values to verify that KVM rejects all values
except the exact host value. Due to the LBR format affecting the core
functionality of LBRs, KVM can't emulate "other" formats, so even though
there are a variety of legal values, KVM should reject anything but an
exact host match.
Suggested-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
sched_getcpu() is glibc dependent and it can simply return the CPU
ID from the registered rseq information, as Florian Weimer pointed.
In this case, it's pointless to compare the return value from
sched_getcpu() and that fetched from the registered rseq information.
Fix the issue by replacing sched_getcpu() with getcpu(), as Florian
suggested. The comments are modified accordingly by replacing
"sched_getcpu()" with "getcpu()".
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20220810104114.6838-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The rseq information is registered by TLS, starting from glibc-2.35.
In this case, the test always fails due to syscall(__NR_rseq). For
example, on RHEL9.1 where upstream glibc-2.35 features are enabled
on downstream glibc-2.34, the test fails like below.
# ./rseq_test
==== Test Assertion Failure ====
rseq_test.c:60: !r
pid=112043 tid=112043 errno=22 - Invalid argument
1 0x0000000000401973: main at rseq_test.c:226
2 0x0000ffff84b6c79b: ?? ??:0
3 0x0000ffff84b6c86b: ?? ??:0
4 0x0000000000401b6f: _start at ??:?
rseq failed, errno = 22 (Invalid argument)
# rpm -aq | grep glibc-2
glibc-2.34-39.el9.aarch64
Fix the issue by using "../rseq/rseq.c" to fetch the rseq information,
registred by TLS if it exists. Otherwise, we're going to register our
own rseq information as before.
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20220810104114.6838-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 49de12ba06ef ("selftests: drop KSFT_KHDR_INSTALL make target")
dropped from tools/testing/selftests/lib.mk the code related to KSFT_KHDR_INSTALL,
but in doing so it also dropped the definition of the ARCH variable. The ARCH
variable is used in several subdirectories, but kvm/ is the only one of these
that was using KSFT_KHDR_INSTALL.
As a result, kvm selftests cannot be built anymore:
In file included from include/x86_64/vmx.h:12,
from x86_64/vmx_pmu_caps_test.c:18:
include/x86_64/processor.h:15:10: fatal error: asm/msr-index.h: No such file or directory
15 | #include <asm/msr-index.h>
| ^~~~~~~~~~~~~~~~~
In file included from ../../../../tools/include/asm/atomic.h:6,
from ../../../../tools/include/linux/atomic.h:5,
from rseq_test.c:15:
../../../../tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/cmpxchg.h: No such file or directory
11 | #include <asm/cmpxchg.h>
| ^~~~~~~~~~~~~~~
Fix it by including the definition that was present in lib.mk.
Fixes: 49de12ba06ef ("selftests: drop KSFT_KHDR_INSTALL make target")
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
|
|
Add a test to ensure sleepable program is rejected by hash map iterator.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220810080538.1845898-10-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add test to validate the overwrite of sock local storage map value in
map iterator and another one to ensure out-of-bound value writing is
rejected.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220810080538.1845898-9-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After closing both related link fd and map fd, reading the map
iterator fd to ensure it is OK to do so.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220810080538.1845898-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a regression test to check against invalid check_and_init_map_value
call inside prealloc_lru_pop.
The kptr should not be reset to NULL once we set it after deleting the
map element. Hence, we trigger a program that updates the element
causing its reuse, and checks whether the unref kptr is reset or not.
If it is, prealloc_lru_pop does an incorrect check_and_init_map_value
call and the test fails.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220809213033.24147-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- An optimization in memblock_add_range() to reduce array traversals
- Improvements to the memblock test suite
* tag 'memblock-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock test: Modify the obsolete description in README
memblock tests: fix compilation errors
memblock tests: change build options to run-time options
memblock tests: remove completed TODO items
memblock tests: set memblock_debug to enable memblock_dbg() messages
memblock tests: add verbose output to memblock tests
memblock tests: Makefile: add arguments to control verbosity
memblock: avoid some repeat when add new range
|
|
Apparently, no existing selftest covers it. Add a new one where
we load cgroup/bind4 program and attach fentry to it. Calling
bpf_obj_get_info_by_fd on the fentry program should return non-zero
btf_id/btf_obj_id instead of crashing the kernel.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220804201140.1340684-2-sdf@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes a few prerequisite updates and fixes to the oldmem
reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities, but
also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
test.
- Fix incorrect recovery of kretprobe modified return address in
stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as
well as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
Revert "s390/smp: enforce lowcore protection on CPU restart"
Revert "s390/smp: rework absolute lowcore access"
Revert "s390/smp,ptdump: add absolute lowcore markers"
s390/unwind: fix fgraph return address recovery
s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
s390: add ELF note type for encrypted CPU state of a PV VCPU
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/setup: rearrange absolute lowcore initialization
s390/boot: cleanup adjust_to_uv_max() function
s390/smp: enforce lowcore protection on CPU restart
s390/tape: fix comment typo
s390/hmcdrv: fix Kconfig "its" grammar
s390/docs: fix warnings for vfio_ap driver doc
s390/docs: fix warnings for vfio_ap driver lock usage doc
s390/crash: support multi-segment iterators
s390/crash: use static swap buffer for copy_to_user_real()
s390/crash: move copy_to_user_real() to crash_dump.c
s390/zcore: fix race when reading from hardware system area
s390/crash: fix incorrect number of bytes to copy to user space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
|
|
Enable/disable tracing infrastructure while packets are in-flight.
This triggers KASAN splat after
e34b9ed96ce3 ("netfilter: nf_tables: avoid skb access on nf_stolen").
While at it, reduce script run time as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"A set of x86/sgx changes focused on implementing the "SGX2" features,
plus a minor cleanup:
- SGX2 ISA support which makes enclave memory management much more
dynamic. For instance, enclaves can now change enclave page
permissions on the fly.
- Removal of an unused structure member"
* tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/sgx: Drop 'page_index' from sgx_backing
selftests/sgx: Page removal stress test
selftests/sgx: Test reclaiming of untouched page
selftests/sgx: Test invalid access to removed enclave page
selftests/sgx: Test faulty enclave behavior
selftests/sgx: Test complete changing of page type flow
selftests/sgx: Introduce TCS initialization enclave operation
selftests/sgx: Introduce dynamic entry point
selftests/sgx: Test two different SGX2 EAUG flows
selftests/sgx: Add test for TCS page permission changes
selftests/sgx: Add test for EPCM permission changes
Documentation/x86: Introduce enclave runtime management section
x86/sgx: Free up EPC pages directly to support large page ranges
x86/sgx: Support complete page removal
x86/sgx: Support modifying SGX page type
x86/sgx: Tighten accessible memory range after enclave initialization
x86/sgx: Support adding of pages to an initialized enclave
x86/sgx: Support restricting of enclave page permissions
x86/sgx: Support VA page allocation without reclaiming
x86/sgx: Export sgx_encl_page_alloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
|
|
Few test cases related to the fix for 924a9bc362a5:
"net: check if protocol extracted by virtio_net_hdr_set_proto is correct"
Need test for the case when a non-standard packet (GSO without NEEDS_CSUM)
sent to the tap device causes a BUG check in the tap driver.
Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|