| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Should be -d instead of -n for dry-run.
Fixes: 5da1918446a1 ("selftests/run_kselftest.sh: Make each test individually selectable")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
writting -> writing
Signed-off-by: Wang Qing <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The memfd tests emit several warnings:
fuse_test.c:261:7: warning: implicit declaration of function 'open'
fuse_test.c:67:6: warning: implicit declaration of function 'fcntl'
memfd_test.c:397:6: warning: implicit declaration of function 'fallocate'
memfd_test.c:64:7: warning: implicit declaration of function 'open'
memfd_test.c:90:6: warning: implicit declaration of function 'fcntl'
These are all caused by the test not including fcntl.h.
Instead of including linux/fcntl.h, include fcntl.h, which should
eventually cause the former to be included as well.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Use clock_gettime() instead of deprecated ftime().
aperf.c: In function ‘main’:
aperf.c:58:2: warning: ‘ftime’ is deprecated [-Wdeprecated-declarations]
58 | ftime(&before);
| ^~~~~
In file included from aperf.c:9:
/usr/include/sys/timeb.h:39:12: note: declared here
39 | extern int ftime (struct timeb *__timebuf)
| ^~~~~
Signed-off-by: Tommi Rantala <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Rather than overriding the CLEAN rule we can just append to it.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Currently the gpio selftests fail to build if the source tree is read
only:
make -j 160 -C tools/testing/selftests TARGETS=gpio
make[1]: Entering directory '/linux/tools/testing/selftests/gpio'
make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio
make[2]: Entering directory '/linux/tools/gpio'
mkdir -p /linux/tools/gpio/include/linux 2>&1 || true
ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h
ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system
This happens because we ask make to build ../../../gpio (tools/gpio)
without pointing OUTPUT away from the source directory.
To fix it we create a subdirectory of the existing OUTPUT directory,
called tools-gpio, and tell tools/gpio to build in there.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Move the include of lib.mk up so that in a subsequent patch we can use
OUTPUT, which is initialised by lib.mk, in the definition of the GPIO
variables.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED.
That tells the lib.mk logic that the files it references are to be
generated by the Makefile.
Having done that we don't need to override the all rule.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
For simplcity, strip all trailing whitespace from parsed output.
I imagine no one is printing out meaningful trailing whitespace via
KUNIT_FAIL() or similar, and that if they are, they really shouldn't.
`isolate_kunit_output()` yielded liens with trailing \n, which results
in artifacty output like this:
$ ./tools/testing/kunit/kunit.py run
[16:16:46] [FAILED] example_simple_test
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
After this change:
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
We should *not* be expecting lines to end with \n in kunit_tool_test.py
for this reason.
Do the same for `raw_output()` as well which suffers from the same
issue.
This is a followup to [1], but rebased onto kunit-fixes to pick up the
other raw_output() fix and fixes for kunit_tool_test.py.
[1] https://lore.kernel.org/linux-kselftest/[email protected]/
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Tested-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Currently the tool redirects make stdout + stderr, and only shows them
if the make command fails.
This means build warnings aren't shown to the user.
This change prints the contents of stderr even if make succeeds, under
the assumption these are only build warnings or other messages the user
likely wants to see.
We drop stdout from the raised exception since we can no longer easily
collate stdout and stderr and just showing the stderr seems fine.
Example with a warning:
[14:56:35] Building KUnit Kernel ...
../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:6: warning: unused variable ‘unused’ [-Wunused-variable]
19 | int unused;
| ^~~~~~
[14:56:40] Starting KUnit Kernel ...
Note the stderr has a trailing \n, and since we use print, we add
another, but it helps separate make and kunit.py output.
Example with a build error:
[15:02:45] Building KUnit Kernel ...
ERROR:root:../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:2: error: unknown type name ‘invalid_type’
19 | invalid_type *test = data;
| ^~~~~~~~~~~~
...
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The code uses annotations, but they aren't accurate.
Note that type checking in python is a separate process, running
`kunit.py run` will not check and complain about invalid types at
runtime.
Fix pre-existing issues found by running a type checker
$ mypy *.py
All but one of these were returning `None` without denoting this
properly (via `Optional[Type]`).
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When JSON support was added in [1], the KunitParseRequest tuple was
updated to contain a 'build_dir' field, but kunit.py parse doesn't
accept --build_dir as an option. The code nevertheless tried to access
it, resulting in this error:
AttributeError: 'Namespace' object has no attribute 'build_dir'
Given that the parser only uses the build_dir variable to set the
'build_environment' json field, we set it to None (which gives the JSON
'null') for now. Ultimately, we probably do want to be able to set this,
but since it's new functionality which (for the parse subcommand) never
worked, this is the quickest way of getting it back up and running.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit-fixes&id=21a6d1780d5bbfca0ce9b8104ca6233502fcbf86
Fixes: 21a6d1780d5b ("kunit: tool: allow generating test results in JSON")
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The tools/testing/kunit/test_data/ directory was marked as binary
because some of the test_data files cause checkpatch warnings. Fix this
by dropping the .gitattributes file.
Fixes: afc63da64f1e ("kunit: kunit_parser: make parser more robust")
Signed-off-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Add an additional control test that verifies:
-specifying two different max_num_members values fails
-specifying max_num_members > PACKET_FANOUT_MAX fails
In datapath tests, set max_num_members to PACKET_FANOUT_MAX.
Signed-off-by: Tanner Love <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some globals in the tcp_hdr_options test and btf_skc_cls_ingress test
are not using static scope. This patch fixes it.
Targeting bpf-next branch as an improvement since it currently does not
break the build.
Fixes: ad2f8eb0095e ("bpf: selftests: Tcp header options")
Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix compilation error when PMD and PUD are folded
- fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1
- add aarch64 get-reg-list test
x86:
- fix semantic conflict between two series merged for 5.10
- fix (and test) enforcement of paravirtual cpuid features
selftests:
- various cleanups to memory management selftests
- new selftests testcase for performance of dirty logging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: selftests: allow two iterations of dirty_log_perf_test
KVM: selftests: Introduce the dirty log perf test
KVM: selftests: Make the number of vcpus global
KVM: selftests: Make the per vcpu memory size global
KVM: selftests: Drop pointless vm_create wrapper
KVM: selftests: Add wrfract to common guest code
KVM: selftests: Simplify demand_paging_test with timespec_diff_now
KVM: selftests: Remove address rounding in guest code
KVM: selftests: Factor code out of demand_paging_test
KVM: selftests: Use a single binary for dirty/clear log test
KVM: selftests: Always clear dirty bitmap after iteration
KVM: selftests: Add blessed SVE registers to get-reg-list
KVM: selftests: Add aarch64 get-reg-list test
selftests: kvm: test enforcement of paravirtual cpuid features
selftests: kvm: Add exception handling to selftests
selftests: kvm: Clear uc so UCALL_NONE is being properly reported
selftests: kvm: Fix the segment descriptor layout to match the actual layout
KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs
kvm: x86: request masterclock update any time guest uses different msr
kvm: x86: ensure pv_cpuid.features is initialized when enabling cap
...
|
|
If BPF code contains unused BPF subprogram and there are no other subprogram
calls (which can realistically happen in real-world applications given
sufficiently smart Clang code optimizations), libbpf will erroneously assume
that subprograms are entry-point programs and will attempt to load them with
UNSPEC program type.
Fix by not relying on subcall instructions and rather detect it based on the
structure of BPF object's sections.
Fixes: 9a94f277c4fb ("tools: libbpf: restore the ability to load programs from .text section")
Reported-by: Dmitrii Banshchikov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default. Without this patch,
"./dirty_log_perf_test" without any further arguments fails.
Cc: Ben Gardon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Signed-off-by: Andrew Jones <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.
No functional change expected.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.
while read reg; do
if [[ ! $reg =~ ARM64_SYS_REG ]]; then
printf "\t$reg\n"
continue
fi
encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
printf "\t$reg\n"
continue
fi
name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.
Cc: Jim Mattson <[email protected]>
Signed-off-by: Oliver Upton <[email protected]>
Reviewed-by: Peter Shier <[email protected]>
Reviewed-by: Aaron Lewis <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Ensure the out value 'uc' in get_ucall() is properly reporting
UCALL_NONE if the call fails. The return value will be correctly
reported, however, the out parameter 'uc' will not be. Clear the struct
to ensure the correct value is being reported in the out parameter.
Signed-off-by: Aaron Lewis <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-06
1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
For the rcutorture test summary log file console.log of virtual machines is
parsed. When a console.log contains "DEBUG", BUG counter is incremented
because regular expression does not handle to ignore DEBUG.
Signed-off-by: Anna-Maria Behnsen <[email protected]>
Reviewed-by: Benedikt Spranger <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently the kvm-check-branches.sh script calculates the number of CPUs
and passes this to the kvm.sh --cpus command-line argument. This works,
but this commit saves a line by instead using the new kvm.sh --allcpus
command-line argument.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit allows --build-only as a synonym for --buildonly, --kconfigs
for --kconfig, and --kmake-args for --kmake-arg.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The "--duration <minutes>" has worked well for a very long time, but
it can be inconvenient to compute the minutes for (say) a 28-hour run.
It can also be annoying to have to let a simple boot test run for a full
minute. This commit therefore permits an "s" suffix to specify seconds,
"m" to specify minutes (which remains the default), "h" suffix to specify
hours, and "d" to specify days.
With this change, "--duration 5" still specifies that each scenario
run for five minutes, but "--duration 30s" runs for only 30 seconds,
"--duration 8h" runs for eight hours, and "--duration 2d" runs for
two days.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Although the rcutorture scripting now deals correctly with full-up
security-induced pointer obfuscation, it is still counter-productive for
kernel hackers who are analyzing console output. This commit therefore
sets the debug_boot_weak_hash kernel boot parameter, which enables
printing of weak-hashed pointers for torture-test runs.
Please note that this change applies only to runs initiated by the
kvm.sh scripting. If you are instead using modprobe and rmmod, it is
your responsibility to build and boot the underlying kernel to your taste.
Please note further that this change does not result in a security hole
in normal use. The rcutorture testing runs with a negligible userspace,
no networking, and no user interaction. Besides which, there is no data
of value that can be extracted from an rcutorture guest OS that could
not also be extracted from the host that this guest is running on.
Suggested-by: Anna-Maria Gleixner <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Even when the kernel panics and qemu dies, runs with jitter enabled will
continue uselessly until the jitter.sh processes terminate. This can
be annoying if a planned one-hour run instead dies during boot.
This commit therefore kills the jitter.sh processes when the run ends
more than one minute prior to the termination time specified by the
kvm.sh --duration argument or its default.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The SRCU-u scenario expects to enable lockdep but to also disable the
CONFIG_PREEMPT_COUNT kconfig option. This no longer works. This commit
therefore instead enables lockdep in SRCU-t, which then allows SRCU-u
to disable CONFIG_PREEMPT_COUNT.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The "NOHZ tick-stop error: Non-RCU local softirq work is pending"
warning happens frequently and appears to be irrelevant to the various
torture tests. This commit therefore filters it out.
If there proves to be a need to pay attention to it a later commit will
add an "advice" category to allow the user to immediately see that
although something happened, it was not an indictment of the system
being tortured.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The rcuscale test module does not use batches, so there is only
ever one batch. This commit therefore informs the kvm-recheck-rcuscale.sh
script of this fact of life.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds the ability to test performance and scalability of RCU
Tasks Trace updaters.
Reported-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to the ftrace test and several fixes from Tommi Rantala for
various other tests"
* tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: binderfs: use SKIP instead of XFAIL
selftests: clone3: use SKIP instead of XFAIL
selftests: core: use SKIP instead of XFAIL in close_range_test.c
selftests: proc: fix warning: _GNU_SOURCE redefined
selftests: pidfd: drop needless linux/kcmp.h inclusion in pidfd_setns_test.c
selftests: pidfd: add CONFIG_CHECKPOINT_RESTORE=y to config
selftests: pidfd: skip test on kcmp() ENOSYS
selftests: pidfd: use ksft_test_result_skip() when skipping test
selftests/harness: prettify SKIP message whitespace again
selftests: pidfd: fix compilation errors due to wait.h
selftests: filter kselftest headers from command in lib.mk
selftests/ftrace: check for do_sys_openat2 in user-memory test
selftests/ftrace: Use $FUNCTION_FORK to reference kernel fork function
|