| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Expand the binary stats test to verify that a stats fd can be dup()'d
and read, to (very) roughly simulate userspace passing around the file.
Adding the dup() test is primarily an intermediate step towards verifying
that userspace can read VM/vCPU stats before _and_ after userspace closes
its copy of the VM fd; the dup() test itself is only mildly interesting.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Verify that KVM doesn't artificially limit KVM_GET_STATS_FD to a single
file per VM/vCPU. There's no known use case for getting multiple stats
fds, but it should work, and more importantly creating multiple files will
make it easier to test that KVM correct manages VM refcounts for stats
files.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Explicitly free the all-encompassing vcpus array in the binary stats test
so that the test is consistent with respect to freeing all dynamically
allocated resources (versus letting them be freed on exit).
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Move the stats fd cleanup code into stats_test() and drop the
superfluous vm_stats_test() and vcpu_stats_test() helpers in order to
decouple creation of the stats file from consuming/testing the file
(deduping code is a bonus). This will make it easier to test various
edge cases related to stats, e.g. that userspace can dup() a stats fd,
that userspace can have multiple stats files for a singleVM/vCPU, etc.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Use pread() with an explicit offset when reading the header and the header
name for a binary stats fd so that the common helper and the binary stats
test don't subtly rely on the file effectively being untouched, e.g. to
allow multiple reads of the header, name, etc.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
These selftests tests 2 major scenarios: the BPF based defragmentation
can successfully be done and that packet pointers are invalidated after
calls to the kfunc. The logic is similar for both ipv4 and ipv6.
In the first scenario, we create a UDP client and UDP echo server. The
the server side is fairly straightforward: we attach the prog and simply
echo back the message.
The on the client side, we send fragmented packets to and expect the
reassembled message back from the server.
Signed-off-by: Daniel Xu <[email protected]>
Link: https://lore.kernel.org/r/33e40fdfddf43be93f2cb259303f132f46750953.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Extend connect_to_fd_opts() to take optional type and protocol
parameters for the client socket. These parameters are useful when
opening a raw socket to send IP fragments.
Signed-off-by: Daniel Xu <[email protected]>
Link: https://lore.kernel.org/r/9067db539efdfd608aa86a2b143c521337c111fc.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
For connectionless protocols or raw sockets we do not want to actually
connect() to the server.
Signed-off-by: Daniel Xu <[email protected]>
Link: https://lore.kernel.org/r/525c13d66dac2d640a1db922546842c051c6f2e6.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry. An example:
Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]
It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Cc: [email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Vishal Verma:
- Update MAINTAINERS for cxl
- A few static analysis fixes
- Fix a Kconfig dependency for CONFIG_FW_LOADER
* tag 'cxl-fixes-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
tools/testing/cxl: Remove unused SZ_512G macro
cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()
cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()
cxl: Update MAINTAINERS
cxl/mem: Fix a double shift bug
cxl: fix CONFIG_FW_LOADER dependency
|
|
Add a new IOMMU_TEST_OP_ACCESS_REPLACE_IOAS to allow replacing the
access->ioas, corresponding to the iommufd_access_replace() helper.
Then add replace coverage as a part of user_copy test case, which
basically repeats the copy test after replacing the old ioas with a new
one.
Link: https://lore.kernel.org/r/a4897f93d41c34b972213243b8dbf4c3832842e4.1690523699.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Currently, test_progs-cpuv4 is generated with clang build kernel
when bpf cpu=v4 is supported by the clang compiler.
Let us enable test_progs-cpuv4 for gcc build kernel as well.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The -X option was chosen because X looks like a cross, and the underlying
callback is 'get cross timestamp'.
Signed-off-by: Alex Maftei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The -x option (where 'x' stands for eXtended) takes an argument which
represents the number of samples to request from the PTP device.
The help message will display the maximum number of samples allowed.
Providing an invalid argument will also display the maximum number of
samples allowed.
Signed-off-by: Alex Maftei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Hannes Reinecke says:
====================
net/tls: fixes for NVMe-over-TLS
here are some small fixes to get NVMe-over-TLS up and running.
The first set are just minor modifications to have MSG_EOR handled
for TLS, but the second set implements the ->read_sock() callback
for tls_sw.
The ->read_sock() callbacks return -EIO when encountering any TLS
Alert message, but as that's the default behaviour anyway I guess
we can get away with it.
====================
Applied on top of the tag in case Sagi gets convinced to pull it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As the recent patch is modifying the behaviour for TLS re MSG_EOR
handling we should be having a test for it.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The following ldsx cases are tested:
- signed readonly map value
- read/write map value
- probed memory
- not-narrowed ctx field access
- narrowed ctx field access.
Without previous proper verifier/git handling, the test will fail.
If cpuv4 is not supported either by compiler or by jit,
the test will be skipped.
# ./test_progs -t ldsx_insn
#113/1 ldsx_insn/map_val and probed_memory:SKIP
#113/2 ldsx_insn/ctx_member_sign_ext:SKIP
#113/3 ldsx_insn/ctx_member_narrow_sign_ext:SKIP
#113 ldsx_insn:SKIP
Summary: 1/0 PASSED, 3 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add unit tests for gotol insn.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add unit tests for sdiv/smod insns.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add unit tests for bswap insns.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add unit tests for movsx insns.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add unit tests for new ldsx insns. The test includes sign-extension
with a single value or with a value range.
If cpuv4 is not supported due to
(1) older compiler, e.g., less than clang version 18, or
(2) test runner test_progs and test_progs-no_alu32 which tests
cpu v2 and v3, or
(3) non-x86_64 arch not supporting new insns in jit yet,
a dummy program is added with below output:
#318/1 verifier_ldsx/cpuv4 is not supported by compiler or jit, use a dummy test:OK
#318 verifier_ldsx:OK
to indicate the test passed with a dummy test instead of actually
testing cpuv4. I am using a dummy prog to avoid changing the
verifier testing infrastructure. Once clang 18 is widely available
and other architectures support cpuv4, at least for CI run,
the dummy program can be removed.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Similar to no-alu32 runner, if clang compiler supports -mcpu=v4,
a cpuv4 runner is created to test bpf programs compiled with
-mcpu=v4.
The following are some num-of-insn statistics for each newer
instructions based on existing selftests, excluding subsequent
cpuv4 insn specific tests.
insn pattern # of instructions
reg = (s8)reg 4
reg = (s16)reg 4
reg = (s32)reg 144
reg = *(s8 *)(reg + off) 13
reg = *(s16 *)(reg + off) 14
reg = *(s32 *)(reg + off) 15215
reg = bswap16 reg 142
reg = bswap32 reg 38
reg = bswap64 reg 14
reg s/= reg 0
reg s%= reg 0
gotol <offset> 58
Note that in llvm -mcpu=v4 implementation, the compiler is a little
bit conservative about generating 'gotol' insn (32-bit branch offset)
as it didn't precise count the number of insns (e.g., some insns are
debug insns, etc.). Compared to old 'goto' insn, newer 'gotol' insn
should have comparable verification states to 'goto' insn.
With current patch set, all selftests passed with -mcpu=v4
when running test_progs-cpuv4 binary. The -mcpu=v3 and -mcpu=v2 run
are also successful.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The following test_verifier subtest failed due to
new encoding for BSWAP.
$ ./test_verifier
...
#99/u invalid 64-bit BPF_END FAIL
Unexpected success to load!
verification time 215 usec
stack depth 0
processed 3 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
#99/p invalid 64-bit BPF_END FAIL
Unexpected success to load!
verification time 198 usec
stack depth 0
processed 3 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Tighten the test so it still reports a failure.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
|
|
On a system with both SVE and SME when we change one of the VLs this should
not result in a change in the other VL. Add a check that this is in fact
the case to vec-syscfg.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-3-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
We just fixed an issue where changing the SVE VL while SME was active could
result in us attempting to save the streaming mode SVE vectors without any
backing storage. Add a test case which provokes that issue, ideally we
should also verify that the contents of ZA are unaffected by any of what we
did.
Note that since we need to keep streaming mode enabled we can't use any
syscalls to trigger the issue, we have to sit in a loop in usersapce and
hope to be preempted. The chosen numbers trigger with defconfig on all the
virtual platforms for me, this won't be 100% on all systems but avoid an
overcomplicated test implementation.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-2-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as
SOCK_STREAM test, except it also tests MSG_TRUNC flag.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This new version makes test more complicated by adding empty read,
partial read and data comparisons between MSG_PEEK and normal reads.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The test marks as skipped if a syscall with the AT_SYMLINK_NOFOLLOW flag
fails. This is because not all filesystems support changing the mode
bits of symlinks properly. These filesystems return an error but change
the mode bits:
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
newfstatat(4, "symlink", {st_mode=S_IFLNK|0777, st_size=7, ...}, AT_SYMLINK_NOFOLLOW) = 0
syscall_0x1c3(0x4, 0x55fa1f244396, 0x180, 0x100, 0x55fa1f24438e, 0x34) = -1 EOPNOTSUPP (Operation not supported)
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
This happens with btrfs and xfs:
$ tools/testing/selftests/fchmodat2/fchmodat2_test
TAP version 13
1..1
ok 1 # SKIP fchmodat2(symlink)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
$ stat /tmp/ksft-fchmodat2.*/symlink
File: /tmp/ksft-fchmodat2.3NCqlE/symlink -> regfile
Size: 7 Blocks: 0 IO Block: 4096 symbolic link
Device: 7,0 Inode: 133 Links: 1
Access: (0600/lrw-------) Uid: ( 0/ root) Gid: ( 0/ root)
Signed-off-by: Alexey Gladkov <[email protected]>
Message-Id: <4532a04a870ff589ba62ceeacf76f0bd81b9ba01.1689092120.git.legion@kernel.org>
Signed-off-by: Christian Brauner <[email protected]>
|
|
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be
used instead of 'ip6tables'. So no need to look if 'ip6tables' is
available in this case.
Cc: [email protected]
Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add ability to kunit.py to filter attributes and report a list of tests
including attributes without running tests.
Add flag "--filter" to input filters on test attributes. Tests will be
filtered out if they do not match all inputted filters.
Example: --filter speed=slow (This filter would run only the tests that are
marked as slow)
Filters have operations: <, >, <=, >=, !=, and =. But note that the
characters < and > are often interpreted by the shell, so they may need to
be quoted or escaped.
Example: --filter "speed>slow" or --filter speed\>slow (This filter would
run only the tests that have the speed faster than slow.
Additionally, multiple filters can be used.
Example: --filter "speed=slow, module!=example" (This filter would run
only the tests that have the speed slow and are not in the "example"
module)
Note if the user wants to skip filtered tests instead of not
running/showing them use the "--filter_action=skip" flag instead.
Expose the output of kunit.action=list option with flag "--list_tests" to
output a list of tests. Additionally, add flag "--list_tests_attr" to
output a list of tests and their attributes. These flags are useful to see
tests and test attributes without needing to run tests.
Example of the output of "--list_tests_attr":
example
example.test_1
example.test_2
# example.test_2.speed: slow
This output includes a suite, example, with two test cases, test_1 and
test_2. And in this instance test_2 has been marked as slow.
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Rae Moar <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Test the basic flow.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Now that we actually call iommufd_device_bind() we can return the
idev_id from that function to userspace for use in other APIs.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Allow the selftest to call the function on the mock idev, add some tests
to exercise it.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Fix to check the availability of fprobe and kprobes for
add_remove_btfarg.tc.
Only if both kprobe and fprobe are not supported, it should return
"unsupported".
Link: https://lore.kernel.org/all/169024904889.395371.17998733386857387118.stgit@devnote2/
Fixes: 4231f30fcc34 ("selftests/ftrace: Add BTF arguments test cases")
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
We use two programs to check that the new reuseport logic is executed
appropriately.
The first is a TC clsact program which bpf_sk_assigns
the skb to a UDP or TCP socket created by user space. Since the test
communicates via lo we see both directions of packets in the eBPF.
Traffic ingressing to the reuseport socket is identified by looking
at the destination port. For TCP, we additionally need to make sure
that we only assign the initial SYN packets towards our listening
socket. The network stack then creates a request socket which
transitions to ESTABLISHED after the 3WHS.
The second is a reuseport program which shares the fact that
it has been executed with user space. This tells us that the delayed
lookup mechanism is working.
Signed-off-by: Daniel Borkmann <[email protected]>
Co-developed-by: Lorenz Bauer <[email protected]>
Signed-off-by: Lorenz Bauer <[email protected]>
Cc: Joe Stringer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add newly addded set-process-name test to .gitignore
Signed-off-by: Shuah Khan <[email protected]>
|
|
Remove clean target in Makefile to fix the following warning
and use the one in common lib.mk
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:160: warning: ignoring old recipe for target 'clean'
Signed-off-by: Shuah Khan <[email protected]>
|
|
cat_val() is only used during CAT test but it checks for test type.
Remove test type checks and the unused else branch from cat_val().
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Results include warm-up test which is discarded before passing the sum
to show_cache_info(). show_cache_info() handles this by subtracting one
from the number of tests in divisor. It is a trappy construct to have
sum and number of tests parameters to disagree like this.
A more logical place for subtracting the skipped tests is where the sum
is calculated so move it there. Pass the correct number of tests to
show_cache_info() so it can be used directly as the divisor for
calculating the average.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
CAT and CMT tests have count_of_bits, long_mask, cbm_mask, and
cache_size global variables that can be moved into the sole using
function.
Make the global variables local variables of the relevant function to
scope them better.
While at it, move cache_size initialization into the declaration line.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
struct resctrl_val_param has ->setup() function that accepts variable
argument list. All test cases use only 1 argument as input and it's
the struct resctrl_val_param pointer.
Instead of variable argument list, directly pass struct
resctrl_val_param pointer as the only parameter to ->setup().
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Test name is passed to fill_buf functions so that they can loop around
buffer only once. This is required for CAT test case.
To loop around buffer only once, caller doesn't need to let fill_buf
know which test case it is. Instead, pass a boolean argument 'once'
which makes fill_buf more generic.
As run_benchmark() no longer needs to pass the test name to
run_fill_buf(), a few test running functions can be simplified to not
write the test name into the default benchmark_cmd. The has_ben
argument can also be removed now from those test running functions.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
fill_buf's arguments can be improved in multiple ways:
- Multiple functions in fill_buf have start_ptr as one of their
argument which is a bit long and the extra "start" is pretty
obvious when it comes to pointers.
- Some of the functions take end_ptr and others size_t to indicate
the end of the buffer.
- Some arguments meaning buffer size are called just 's'
- mem_flush() takes void * but immediately converts it to char *
Cleanup the parameters to make things simpler and more consistent:
- Rename start_ptr to simply buf as it's shorter.
- Replace end_ptr and s parameters with buf_size and only calculate
end_ptr in the functions that truly use it.
- Make mem_flush() parameters to follow the same convention as the
other functions in fill_buf.
- convert mem_flush() char * to unsigned char *.
While at it, fix also a typo in a comment.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
fill_buf stores buffer pointer into global variable startptr that is
only used in fill_cache().
Remove startptr as global variable, the local variable in fill_cache()
is enough to keep the pointer.
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's
also duplicated memory init code for malloc_and_init_memory == 0 case
in fill_buf() which is unused.
Remove the malloc_and_init_memory parameter and the duplicated mem init
code.
While at it, fix also a typo in run_fill_buf() prototype's argument.
Co-developed-by: Fenghua Yu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Tested-by: Babu Moger <[email protected]>
Tested-by: Shaopeng Tan (Fujitsu) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|