| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
By default main RSS table should change to include all queues.
When user sets a specific RSS config the driver should preserve it,
even when queue count changes. Driver should refuse to deactivate
queues used in the user-set RSS config.
For additional contexts driver should still refuse to deactivate
queues in use. Whether the contexts should get resized like
context 0 when queue count increases is a bit unclear. I anticipate
most drivers today don't do that. Since main use case for additional
contexts is to set the indir table - it doesn't seem worthwhile to
care about behavior of the default table too much. Don't test that.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Wrap up sending traffic and checking in which queues it landed
in a helper.
The method used for testing is to send a lot of iperf traffic
and check which queues received the most packets. Those should
be the queues where we expect iperf to land - either because we
installed a filter for the port iperf uses, or we didn't and
expect it to use context 0.
Contexts get disjoint queue sets, but the main context (AKA context 0)
may receive some background traffic (noise).
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The basic test may fail without resetting the RSS indir table.
Use the .exec() method to run cleanup early since we re-test
with traffic that returning to default state works.
While at it reformat the doc a tiny bit.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].
Fix by increasing the ageing time.
The same change was done for the VLAN-aware version of the test in
commit dfbab74044be ("selftests: forwarding: Make vxlan-bridge-1q pass
on debug kernels").
[1]
# ./vxlan_bridge_1d.sh
[...]
# TEST: VXLAN: flood before learning [ OK ]
# TEST: VXLAN: show learned FDB entry [ OK ]
# TEST: VXLAN: learned FDB entry [FAIL]
# veth3: Expected to capture 0 packets, got 4.
# RTNETLINK answers: No such file or directory
# TEST: VXLAN: deletion of learned FDB entry [ OK ]
# TEST: VXLAN: Ageing of learned FDB entry [FAIL]
# veth3: Expected to capture 0 packets, got 2.
[...]
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Extend the selftest tool to add coverage of testing IOPF handling. This
would include the following tests:
- Allocating and destroying an iommufd fault object.
- Allocating and destroying an IOPF-capable HWPT.
- Attaching/detaching/replacing an IOPF-capable HWPT on a device.
- Triggering an IOPF on the mock device.
- Retrieving and responding to the IOPF through the file interface.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan
"Fixes to clang build failures to timerns, vDSO tests and fixes to vDSO
makefile"
* tag 'linux_kselftest-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vDSO: remove duplicate compiler invocations from Makefile
selftests/vDSO: remove partially duplicated "all:" target in Makefile
selftests/vDSO: fix clang build errors and warnings
selftest/timerns: fix clang build failures for abs() calls
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a test case which replaces an active ingress qdisc while keeping the
miniq in-tact during the transition period to the new clsact qdisc.
# ./vmtest.sh -- ./test_progs -t tc_link
[...]
./test_progs -t tc_link
[ 3.412871] bpf_testmod: loading out-of-tree module taints kernel.
[ 3.413343] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#332 tc_links_after:OK
#333 tc_links_append:OK
#334 tc_links_basic:OK
#335 tc_links_before:OK
#336 tc_links_chain_classic:OK
#337 tc_links_chain_mixed:OK
#338 tc_links_dev_chain0:OK
#339 tc_links_dev_cleanup:OK
#340 tc_links_dev_mixed:OK
#341 tc_links_ingress:OK
#342 tc_links_invalid:OK
#343 tc_links_prepend:OK
#344 tc_links_replace:OK
#345 tc_links_revision:OK
Summary: 14/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
It's very useful to be able to interrupt the tests during development.
Detect KeyboardInterrupt, run the cleanups and exit.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
fexit_sleep test runs successfully now on the BPF CI so remove it
from the deny list. ftrace direct calls was blocking tracing programs
on arm64 but it has been resolved by now. For more details see also
discussion in [*].
Signed-off-by: Puranjay Mohan <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected] [*]
|
|
See the previous patch: the API was wrong, we were provided the pointer
to the value, not the actual struct bpf_wq *.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Now that the s390x JIT supports exceptions, remove the respective tests
from the denylist.
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
|
|
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
-I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
cache_shape.c ...
Fixes: 5553a79387e9 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Add a test to verify sampling packets via psample works.
In order to do that, create a subcommand in ovs-dpctl.py to listen to
on the psample multicast group and print samples.
Reviewed-by: Aaron Conole <[email protected]>
Tested-by: Ilya Maximets <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The trunc action was supported decode-able but not parse-able. Add
support for parsing the action string.
Reviewed-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The userspace action lacks parsing support plus it contains a bug in the
name of one of its attributes.
This patch makes userspace action work.
Reviewed-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add sample and psample action support to ovs-dpctl.py.
Refactor common attribute parsing logic into an external function.
Reviewed-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
QEMU 9.0 removed -no-acpi, in favor of machine properties, so update the
Makefile to use the correct QEMU invocation.
Cc: [email protected]
Fixes: b83fdcd9fb8a ("wireguard: selftests: use microvm on x86")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The Makefile open-codes compiler invocations that ../lib.mk already
provides.
Avoid this by using a Make feature that allows setting per-target
variables, which in this case are: CFLAGS and LDFLAGS. This approach
generates the exact same compiler invocations as before, but removes all
of the code duplication, along with the quirky mangled variable names.
So now the Makefile is smaller, less unusual, and easier to read.
The new dependencies are listed after including lib.mk, in order to
let lib.mk provide the first target ("all:"), and are grouped together
with their respective source file dependencies, for visual clarity.
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
There were a couple of errors here:
1. TEST_GEN_PROGS was incorrectly prepending $(OUTPUT) to each program
to be built. However, lib.mk already does that because it assumes "bare"
program names are passed in, so this ended up creating
$(OUTPUT)/$(OUTPUT)/file.c, which of course won't work as intended.
2. lib.mk was included before TEST_GEN_PROGS was set, which led to
lib.mk's "all:" target not seeing anything to rebuild.
So nothing worked, which caused the author to force things by creating
an "all:" target locally--while still including ../lib.mk.
Fix all of this by including ../lib.mk at the right place, and removing
the $(OUTPUT) prefix to the programs to be built, and removing the
duplicate "all:" target.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <[email protected]>
Reviewed-by: Edward Liaw <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Tested-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns about mismatches between the expected and required
integer length being supplied to abs(3).
Fix this by using the correct variant of abs(3): labs(3) or llabs(3), in
these cases.
Reviewed-by: Dmitry Safonov <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Acked-by: Andrei Vagin <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add regression and new tests when hugepage has correctable memory errors,
and how userspace wants to deal with it:
* if enable_soft_offline=1, mapped hugepage is soft offlined
* if enable_soft_offline=0, mapped hugepage is intact
Free hugepages case is not explicitly covered by the tests.
Hugepage having corrected memory errors is emulated with
MADV_SOFT_OFFLINE.
[[email protected]: v7]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiaqi Yan <[email protected]>
Acked-by: Miaohe Lin <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Frank van der Linden <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Lance Yang <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
If CONFIG_PTE_MARKER_UFFD_WP is disabled, then we turn off three features
in userfaultfd_api (UFFD_FEATURE_WP_HUGETLBFS_SHMEM,
UFFD_FEATURE_WP_UNPOPULATED, and UFFD_FEATURE_WP_ASYNC).
Currently this test always will call uffdio_regsiter with the flag
UFFDIO_REGISTER_MODE_WP. However, the kernel ensures in vma_can_userfault
that if the feature UFFD_FEATURE_WP_HUGETLBFS_SHMEM is disabled, only
allow the VM_UFFD_WP on anonymous vmas, meaning our call to
uffdio_regsiter will fail.
We still want to be able to run the test even if we have
CONFIG_PTE_MARKER_UFFD_WP disabled, so check to see if the feature
UFFD_FEATURE_WP_HUGETLBFS_SHMEM has been turned off in the test and if so,
disable us from calling uffdio_regsiter with the flag
UFFDIO_REGISTER_MODE_WP.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Audra Mitchell <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Rafael Aquini <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that we have updated userfaultfd_api to correctly return EINVAL when a
feature is requested but not available, let's fix the uffd-stress test to
only set the UFFD_FEATURE_WP_UNPOPULATED feature when the config is set.
In addition, still run the test if the CONFIG_PTE_MARKER_UFFD_WP is not
set, just dont use the corresponding UFFD_FEATURE_WP_UNPOPULATED feature.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Audra Mitchell <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rafael Aquini <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/[email protected]/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Kselftest fix from Mickaël Salaün:
"Fix Kselftests timeout.
We can't use CLONE_VFORK, since that blocks the parent - and thus the
timeout handling - until the child exits or execve's.
Go back to using plain fork()"
* tag 'kselftest-fix-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/harness: Fix tests timeout and race condition
|
|
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <[email protected]>
Signed-off-by: Xiaochun Lu <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <[email protected]>
Signed-off-by: Xiaochun Lu <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzkaller reported a KMSAN splat in __unix_walk_scc() while backtracking
edge_stack after finalising SCC.
Let's add a test case exercising the path.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Shigeru Yoshida <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
User could update max_nr_regions parameter while DAMON is running to a
value that smaller than the current number of regions that DAMON is
seeing. Such update could be done for reducing the monitoring overhead.
In the case, DAMON should merge regions aggressively more than normal
situation to ensure the new limit is successfully applied. Implement a
kselftest to ensure that.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Users can update DAMON parameters while it is running, using 'commit'
DAMON sysfs interface command. For testing the feature in future tests,
implement a function for doing that on the test-purpose DAMON sysfs
interface wrapper Python module.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Implement a kselftest for DAMON's {min,max}_nr_regions' parameters. The
test ensures both the minimum and the maximum number of regions limit is
respected even if the workload's real number of regions is less than the
minimum or larger than the maximum limits.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Implement DAMON stop function on the test-purpose DAMON sysfs interface
wrapper Python module, _damon_sysfs.py. This feature will be used by
future DAMON tests that need to start/stop DAMON multiple times.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Implement a test for DAMOS tried regions command of DAMON sysfs interface.
It ensures the expected number of monitoring regions are created using an
artificial memory access pattern generator program.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
To test schemes_tried_regions feature, we need to have a program having
specific number of regions that having different access pattern. Existing
artificial access pattern generator, 'access_memory', cannot be used for
the purpose, since it accesses only one region at a given time. Extending
it could be an option, but since the purpose and the implementation are
pretty simple, implementing another one from the scratch is better.
Implement such another artificial memory access program that allocates
user-defined number/size regions and accesses even-numbered regions.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Implement schemes_update_tried_regions DAMON sysfs command on
_damon_sysfs.py, to use on implementations of future tests for the
feature.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions".
This patch series fix a minor issue in a program for DAMON selftest, and
implement new functionality selftests for DAMOS tried regions and
{min,max}_nr_regions. The test for max_nr_regions also test the recovery
from online tuning-caused limit violation, which was fixed by a previous
patch [1] titled "mm/damon/core: merge regions aggressively when
max_nr_regions is unmet".
The first patch fixes a minor problem in the articial memory access
pattern generator for tests. Following 3 patches (2-4) implement schemes
tried regions test. Then a couple of patches (5-6) implementing static
setup based {min,max}_nr_regions functionality test follows. Final two
patches (7-8) implement dynamic max_nr_regions update test.
[1] https://lore.kernel.org/[email protected]
This patch (of 8):
'access_memory' is an artificial memory access pattern generator for DAMON
tests. It creates and accesses memory regions that the user specified the
number and size via the command line. However, real access part of the
program ignores the user-specified size of each region. Instead, it uses
a hard-coded value, 10 MiB. Fix it to use user-defined size.
Note that all existing 'access_memory' users are setting the region size
as 10 MiB. Hence no real problem has happened so far.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b5906f5f7359 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This continues the work on getting the selftests to build without
requiring people to first run "make headers" [1].
Now that the system call numbers are in the correct, checked-in locations
in the kernel tree (./tools/include/uapi/asm/unistd*.h), make sure that
the mm selftests include that file (indirectly).
Doing so provides guaranteed definitions at build time, so remove all of
the checks for "ifdef __NR_xxx" in the mm selftests, because they will
always be true (defined).
[1] commit e076eaca5906 ("selftests: break the dependency upon local
header files")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: John Hubbard <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Jeff Xu <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
thuge-gen.c defines SHM_HUGE_* macros that are provided by the uapi since
4.14. These macros get redefined when compiling with Android's bionic
because its sys/shm.h will import the uapi definitions.
However if linux/shm.h is included, with glibc, sys/shm.h will clash on
some struct definitions:
/usr/include/linux/shm.h:26:8: error: redefinition of ‘struct shmid_ds’
26 | struct shmid_ds {
| ^~~~~~~~
In file included from /usr/include/x86_64-linux-gnu/bits/shm.h:45,
from /usr/include/x86_64-linux-gnu/sys/shm.h:30:
/usr/include/x86_64-linux-gnu/bits/types/struct_shmid_ds.h:24:8: note: originally defined here
24 | struct shmid_ds
| ^~~~~~~~
For now, guard the SHM_HUGE_* defines with ifndef to prevent redefinition
warnings on Android bionic.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Edward Liaw <[email protected]>
Reviewed-by: Carlos Llamas <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Carlos Llamas <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
thuge-gen defines MAP_HUGE_* macros that are provided by linux/mman.h
since 4.15. Removes the macros and includes linux/mman.h instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Edward Liaw <[email protected]>
Reviewed-by: Carlos Llamas <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
create_pagecache_thp_and_fd() in split_huge_page_test.c used the variable
dummy to perform mmap read.
However, this test was skipped even on XFS which has large folio support.
The issue was compiler (gcc 13.2.0) was optimizing out the dummy variable,
therefore, not creating huge page in the page cache.
Use asm volatile() trick to force the compiler not to optimize out the
loop where we read from the mmaped addr. This is similar to what is being
done in other tests (cow.c, etc)
As the variable is now used in the asm statement, remove the unused
attribute.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Pankaj Raghav <[email protected]>
Reviewed-by: Zi Yan <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Pankaj Raghav <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that the test macros are factored out into their final location, and
simplified, it's time to rename TEST_END_CHECK to something that
represents its new functionality: REPORT_TEST_PASS.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: John Hubbard <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Reviewed-by: Jeff Xu <[email protected]>
Tested-by: Jeff Xu <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Clean up and move some copy-pasted items into a new mseal_helpers.h.
1. The test macros can be made safer and simpler, by observing that
they are invariably called when about to return. This means that the
macros do not need an intrusive label to goto; they can simply return.
2. PKEY* items. We cannot, unfortunately use pkey-helpers.h. The
best we can do is to factor out these few items into mseal_helpers.h.
3. These tests still need their own definition of u64, so also move
that to the header file.
4. Be sure to include the new mseal_helpers.h in the Makefile
dependencies.
[[email protected]: include the new mseal_helpers.h in Makefile dependencies]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: John Hubbard <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Jeff Xu <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "cleanups, fixes, and progress towards avoiding "make
headers"", v3.
Eventually, once the build succeeds on a sufficiently old distro, the idea
is to delete $(KHDR_INCLUDES) from the selftests/mm build, and then after
that, from selftests/lib.mk and all of the other selftest builds.
For now, this series merely achieves a clean build of selftests/mm on a
not-so-old distro: Ubuntu 23.04. In other words, after this series is
applied, it is possible to delete $(KHDR_INCLUDES) from
selftests/mm/Makefile and the build will still succeed.
1. Add tools/uapi/asm/unistd_[32|x32|64].h files, which include
definitions of __NR_mseal, and include them (indirectly) from the files
that use __NR_mseal. The new files are copied from ./usr/include/asm,
which is how we have agreed to do this sort of thing, see [1].
2. Add fs.h, similarly created: it was copied directly from a snapshot
of ./usr/include/linux/fs.h after running "make headers".
3. Add a few selected prctl.h values that the ksm and mdwe tests require.
4. Factor out some common code from mseal_test.c and seal_elf.c, into
a new mseal_helpers.h file.
5. Remove local __NR_* definitions and checks.
[1] commit e076eaca5906 ("selftests: break the dependency upon local
header files")
This patch (of 6):
The selftests/mm build isn't exactly "broken", according to the current
documentation, which still claims that one must run "make headers",
before building the kselftests. However, according to the new plan to
get rid of that requirement [1], they are future-broken: attempting to
build selftests/mm *without* first running "make headers" will fail due
to not finding __NR_mseal.
Therefore, include asm-generic/unistd.h, which has all of the system
call numbers that are needed, abstracted across the various CPU arches.
Some explanation in support of this "asm-generic" approach:
For most user space programs, the header file inclusion behaves as per
this microblaze example, which comes from David Hildenbrand (thanks!):
arch/microblaze/include/asm/unistd.h
-> #include <uapi/asm/unistd.h>
arch/microblaze/include/uapi/asm/unistd.h
-> #include <asm/unistd_32.h>
-> Generated during "make headers"
usr/include/asm/unistd_32.h is generated via
arch/microblaze/kernel/syscalls/Makefile with the syshdr command.
So we never end up including asm-generic/unistd.h directly on
microblaze... [2]
However, those programs are installed on a single computer that has a
single set of asm and kernel headers installed.
In contrast, the kselftests are quite special, because they must
provide a set of user space programs that:
a) Mostly avoid using the installed (distro) system header files.
b) Build (and run) on all supported CPU architectures
c) Occasionally use symbols that have so new that they have not
yet been included in the distro's header files.
Doing (a) creates a new problem: how to get a set of cross-platform
headers that works in all cases.
Fortunately, asm-generic headers solve that one. Which is why we need
to use them here--at least, for particularly difficult headers such as
unistd.h.
The reason this hasn't really come up yet, is that until now, the
kselftests requirement (which I'm trying to eventually remove) was that
"make headers" must first be run. That allowed the selftests to get a
snapshot of sufficiently new header files that looked just like (and
conflict with) the installed system headers.
And as an aside, this is also an improvement over past practices of
simply open-coding in a single (not per-arch) definition of a new
symbol, directly into the selftest code.
[1] commit e076eaca5906 ("selftests: break the dependency upon local
header files")
[2] https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing")
Signed-off-by: John Hubbard <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Jeff Xu <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit 1b151e2435fc ("block: Remove special-casing of compound pages")
caused a change in behaviour when releasing the pages if the buffer does
not start at the beginning of the page. This was because the calculation
of the number of pages to release was incorrect. This was fixed by commit
38b43539d64b ("block: Fix page refcounts for unaligned buffers in
__bio_release_pages()").
We pin the user buffer during direct I/O writes. If this buffer is a
hugepage, bio_release_page() will unpin it and decrement all references
and pin counts at ->bi_end_io. However, if any references to the hugepage
remain post-I/O, the hugepage will not be freed upon unmap, leading to a
memory leak.
This patch verifies that a hugepage, used as a user buffer for DIO
operations, is correctly freed upon unmapping, regardless of whether the
offsets are aligned or unaligned w.r.t page boundary.
Test Result Fail Scenario (Without the fix)
--------------------------------------------------------
[]# ./hugetlb_dio
TAP version 13
1..4
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 1 : Huge pages freed successfully !
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 2 : Huge pages freed successfully !
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 3 : Huge pages freed successfully !
No. Free pages before allocation : 7
No. Free pages after munmap : 6
not ok 4 : Huge pages not freed!
Totals: pass:3 fail:1 xfail:0 xpass:0 skip:0 error:0
Test Result PASS Scenario (With the fix)
---------------------------------------------------------
[]#./hugetlb_dio
TAP version 13
1..4
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 1 : Huge pages freed successfully !
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 2 : Huge pages freed successfully !
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 3 : Huge pages freed successfully !
No. Free pages before allocation : 7
No. Free pages after munmap : 7
ok 4 : Huge pages freed successfully !
Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
[[email protected]: address review comments from Muhammad]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: add this test to run_vmtests.sh]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 38b43539d64b ("block: Fix page refcounts for unaligned buffers in __bio_release_pages()")
Signed-off-by: Donet Tom <[email protected]>
Signed-off-by: Ritesh Harjani (IBM) <[email protected]>
Co-developed-by: Ritesh Harjani (IBM) <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Ritesh Harjani (IBM) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Tony Battersby <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|