aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds218-3023/+11299
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-21Merge tag 'kvm-x86-apic-6.3' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini1-0/+55
KVM x86 APIC changes for 6.3: - Remove a superfluous variables from apic_get_tmcct() - Fix various edge cases in x2APIC MSR emulation - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Reset xAPIC when userspace forces "impossible" x2APIC => xAPIC transition
2023-02-21Merge tag 'arm64-upstream' of ↵Linus Torvalds31-111/+1535
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
2023-02-22netfilter: ip6t_rpfilter: Fix regression with VRF interfacesPhil Sutter1-6/+26
When calling ip6_route_lookup() for the packet arriving on the VRF interface, the result is always the real (slave) interface. Expect this when validating the result. Fixes: acc641ab95b66 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field") Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-02-21Merge tag 'm68k-for-v6.3-tag1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Add seccomp support - defconfig updates - Miscellaneous fixes and improvements * tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: /proc/hardware should depend on PROC_FS selftests/seccomp: Add m68k support m68k: Add kernel seccomp support m68k: Check syscall_trace_enter() return code m68k: defconfig: Update defconfigs for v6.2-rc3 m68k: q40: Do not initialise statics to 0
2023-02-21Merge tag 'rcu.2023.02.10a' of ↵Linus Torvalds6-17/+16
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ...
2023-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-4/+22
Per-next-PR merge. net/smc/af_smc.c b5dd4d698171 ("net/smc: llc_conf_mutex refactor, replace it with rw_semaphore") e40b801b3603 ("net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-21Merge tag 'x86_vdso_for_v6.3_rc1' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso updates from Borislav Petkov: - Add getcpu support for the 32-bit version of the vDSO - Some smaller fixes * tag 'x86_vdso_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix -Wmissing-prototypes warnings x86/vdso: Fake 32bit VDSO build on 64bit compile for vgetcpu selftests: Emit a warning if getcpu() is missing on 32bit x86/vdso: Provide getcpu for x86-32. x86/cpu: Provide the full setup for getcpu() on x86-32 x86/vdso: Move VDSO image init to vdso2c generated code
2023-02-21Merge tag 'v6.2' into iommufd.git for-nextJason Gunthorpe28-245/+669
Resolve conflicts from the signature change in iommu_map: - drivers/infiniband/hw/usnic/usnic_uiom.c Switch iommu_map_atomic() to iommu_map(.., GFP_ATOMIC) - drivers/vfio/vfio_iommu_type1.c Following indenting change for GFP_KERNEL Signed-off-by: Jason Gunthorpe <[email protected]>
2023-02-21sefltests: netdevsim: wait for devlink instance after netns removalJiri Pirko1-0/+18
When devlink instance is put into network namespace and that network namespace gets deleted, devlink instance is moved back into init_ns. This is done as a part of cleanup_net() routine. Since cleanup_net() is called asynchronously from workqueue, there is no guarantee that the devlink instance move is done after "ip netns del" returns. So fix this race by making sure that the devlink instance is present before any other operation. Reported-by: Amir Tzin <[email protected]> Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-21selftest: fib_tests: Always cleanup before exitRoxana Nicolescu1-0/+2
Usage of `set -e` before executing a command causes immediate exit on failure, without cleanup up the resources allocated at setup. This can affect the next tests that use the same resources, leading to a chain of failures. A simple fix is to always call cleanup function when the script exists. This approach is already used by other existing tests. Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose") Signed-off-by: Roxana Nicolescu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-20Merge tag 'sched-core-2023-02-20' of ↵Linus Torvalds31-4665/+4470
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Improve the scalability of the CFS bandwidth unthrottling logic with large number of CPUs. - Fix & rework various cpuidle routines, simplify interaction with the generic scheduler code. Add __cpuidle methods as noinstr to objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks. - Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query previously issued registrations. - Limit scheduler slice duration to the sysctl_sched_latency period, to improve scheduling granularity with a large number of SCHED_IDLE tasks. - Debuggability enhancement on sys_exit(): warn about disabled IRQs, but also enable them to prevent a cascade of followup problems and repeat warnings. - Fix the rescheduling logic in prio_changed_dl(). - Micro-optimize cpufreq and sched-util methods. - Micro-optimize ttwu_runnable() - Micro-optimize the idle-scanning in update_numa_stats(), select_idle_capacity() and steal_cookie_task(). - Update the RSEQ code & self-tests - Constify various scheduler methods - Remove unused methods - Refine __init tags - Documentation updates - Misc other cleanups, fixes * tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits) sched/rt: pick_next_rt_entity(): check list_entry sched/deadline: Add more reschedule cases to prio_changed_dl() sched/fair: sanitize vruntime of entity being placed sched/fair: Remove capacity inversion detection sched/fair: unlink misfit task from cpu overutilized objtool: mem*() are not uaccess safe cpuidle: Fix poll_idle() noinstr annotation sched/clock: Make local_clock() noinstr sched/clock/x86: Mark sched_clock() noinstr x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read() x86/atomics: Always inline arch_atomic64*() cpuidle: tracing, preempt: Squash _rcuidle tracing cpuidle: tracing: Warn about !rcu_is_watching() cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG cpuidle: drivers: firmware: psci: Dont instrument suspend code KVM: selftests: Fix build of rseq test exit: Detect and fix irq disabled state in oops cpuidle, arm64: Fix the ARM64 cpuidle logic cpuidle: mvebu: Fix duplicate flags assignment sched/fair: Limit sched slice duration ...
2023-02-20Merge tag 'for-netdev' of ↵Jakub Kicinski100-581/+2226
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-17 We've added 64 non-merge commits during the last 7 day(s) which contain a total of 158 files changed, 4190 insertions(+), 988 deletions(-). The main changes are: 1) Add a rbtree data structure following the "next-gen data structure" precedent set by recently-added linked-list, that is, by using kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky. 2) Add a new benchmark for hashmap lookups to BPF selftests, from Anton Protopopov. 3) Fix bpf_fib_lookup to only return valid neighbors and add an option to skip the neigh table lookup, from Martin KaFai Lau. 4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accouting for container environments, from Yafang Shao. 5) Batch of ice multi-buffer and driver performance fixes, from Alexander Lobakin. 6) Fix a bug in determining whether global subprog's argument is PTR_TO_CTX, which is based on type names which breaks kprobe progs, from Andrii Nakryiko. 7) Prep work for future -mcpu=v4 LLVM option which includes usage of BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier, from Eduard Zingerman. 8) More prep work for later building selftests with Memory Sanitizer in order to detect usages of undefined memory, from Ilya Leoshkevich. 9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer dereference via sendmsg(), from Maciej Fijalkowski. 10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui. 11) Fix BPF memory allocator in combination with BPF hashtab where it could corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao. 12) Fix LoongArch BPF JIT to always use 4 instructions for function address so that instruction sequences don't change between passes, from Hengqi Chen. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits) selftests/bpf: Add bpf_fib_lookup test bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup riscv, bpf: Add bpf trampoline support for RV64 riscv, bpf: Add bpf_arch_text_poke support for RV64 riscv, bpf: Factor out emit_call for kernel and bpf context riscv: Extend patch_text for multiple instructions Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES" selftests/bpf: Add global subprog context passing tests selftests/bpf: Convert test_global_funcs test to test_loader framework bpf: Fix global subprog context argument resolution logic LoongArch, bpf: Use 4 instructions for function address in JIT bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state bpf: Disable bh in bpf_test_run for xdp and tc prog xsk: check IFF_UP earlier in Tx path Fix typos in selftest/bpf files selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd() ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-21tracing/probe: add a char type to show the character value of traced argumentsDonglin Peng1-0/+47
There are scenes that we want to show the character value of traced arguments other than a decimal or hexadecimal or string value for debug convinience. I add a new type named 'char' to do it and a new test case file named 'kprobe_args_char.tc' to do selftest for char type. For example: The to be traced function is 'void demo_func(char type, char *name);', we can add a kprobe event as follows to show argument values as we want: echo 'p:myprobe demo_func $arg1:char +0($arg2):char[5]' > kprobe_events we will get the following trace log: ... myprobe: (demo_func+0x0/0x29) arg1='A' arg2={'b','p','f','1',''} Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Donglin Peng <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2023-02-21selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbolsMasami Hiramatsu (Google)1-1/+1
Fix kprobe probepoint testcase to ignore __pfx_* prefix symbols. Those are introduced by commit b341b20d648b ("x86: Add prefix symbols for function padding") for identifying PADDING_BYTES of NOPs. Since kprobe events can not probe these prefix symbols, this testcase has to skip those symbols. Link: https://lore.kernel.org/all/167309835609.640500.9664678940260305746.stgit@devnote3/ Fixes: b341b20d648b ("x86: Add prefix symbols for function padding") Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Acked-by: Shuah Khan <[email protected]>
2023-02-21selftests/ftrace: Fix eprobe syntax test case to check filter supportMasami Hiramatsu (Google)1-1/+3
Fix eprobe syntax test case to check whether the kernel supports the filter on eprobe for filter syntax test command. Without this fix, this test case will fail if the kernel supports eprobe but doesn't support the filter on eprobe. Link: https://lore.kernel.org/all/167309834742.640500.379128668288448035.stgit@devnote3/ Fixes: 9e14bae7d049 ("selftests/ftrace: Add eprobe syntax error testcase") Cc: [email protected] Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Acked-by: Shuah Khan <[email protected]>
2023-02-20Merge tag 'fs.idmapped.v6.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull vfs idmapping updates from Christian Brauner: - Last cycle we introduced the dedicated struct mnt_idmap type for mount idmapping and the required infrastucture in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). As promised in last cycle's pull request message this converts everything to rely on struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevant on the mount level. Especially for non-vfs developers without detailed knowledge in this area this was a potential source for bugs. This finishes the conversion. Instead of passing the plain namespace around this updates all places that currently take a pointer to a mnt_userns with a pointer to struct mnt_idmap. Now that the conversion is done all helpers down to the really low-level helpers only accept a struct mnt_idmap argument instead of two namespace arguments. Conflating mount and other idmappings will now cause the compiler to complain loudly thus eliminating the possibility of any bugs. This makes it impossible for filesystem developers to mix up mount and filesystem idmappings as they are two distinct types and require distinct helpers that cannot be used interchangeably. Everything associated with struct mnt_idmap is moved into a single separate file. With that change no code can poke around in struct mnt_idmap. It can only be interacted with through dedicated helpers. That means all filesystems are and all of the vfs is completely oblivious to the actual implementation of idmappings. We are now also able to extend struct mnt_idmap as we see fit. For example, we can decouple it completely from namespaces for users that don't require or don't want to use them at all. We can also extend the concept of idmappings so we can cover filesystem specific requirements. In combination with the vfs{g,u}id_t work we finished in v6.2 this makes this feature substantially more robust and thus difficult to implement wrong by a given filesystem and also protects the vfs. - Enable idmapped mounts for tmpfs and fulfill a longstanding request. A long-standing request from users had been to make it possible to create idmapped mounts for tmpfs. For example, to share the host's tmpfs mount between multiple sandboxes. This is a prerequisite for some advanced Kubernetes cases. Systemd also has a range of use-cases to increase service isolation. And there are more users of this. However, with all of the other work going on this was way down on the priority list but luckily someone other than ourselves picked this up. As usual the patch is tiny as all the infrastructure work had been done multiple kernel releases ago. In addition to all the tests that we already have I requested that Rodrigo add a dedicated tmpfs testsuite for idmapped mounts to xfstests. It is to be included into xfstests during the v6.3 development cycle. This should add a slew of additional tests. * tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits) shmem: support idmapped mounts for tmpfs fs: move mnt_idmap fs: port vfs{g,u}id helpers to mnt_idmap fs: port fs{g,u}id helpers to mnt_idmap fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap fs: port i_{g,u}id_{needs_}update() to mnt_idmap quota: port to mnt_idmap fs: port privilege checking helpers to mnt_idmap fs: port inode_owner_or_capable() to mnt_idmap fs: port inode_init_owner() to mnt_idmap fs: port acl to mnt_idmap fs: port xattr to mnt_idmap fs: port ->permission() to pass mnt_idmap fs: port ->fileattr_set() to pass mnt_idmap fs: port ->set_acl() to pass mnt_idmap fs: port ->get_acl() to pass mnt_idmap fs: port ->tmpfile() to pass mnt_idmap fs: port ->rename() to pass mnt_idmap fs: port ->mknod() to pass mnt_idmap fs: port ->mkdir() to pass mnt_idmap ...
2023-02-20ktest: Restore stty setting at first in dodieMasami Hiramatsu (Google)1-5/+5
The do_send_email() will call die before restoring stty if sendmail setting is not correct or sendmail is not installed. It is safer to restore it in the beginning of dodie(). Link: https://lkml.kernel.org/r/167420617635.2988775.13045295332829029437.stgit@devnote3 Cc: John 'Warthog9' Hawley <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt <[email protected]>
2023-02-20ktest.pl: Add RUN_TIMEOUT option with default unlimitedSteven Rostedt2-4/+21
There is a disconnect between the run_command function and the wait_for_input. The wait_for_input has a default timeout of 2 minutes. But if that happens, the run_command loop will exit out to the waitpid() of the executing command. This fails in that it no longer monitors the command, and also, the ssh to the test box can hang when its finished, as it's waiting for the pipe it's writing to to flush, but the loop that reads that pipe has already exited, leaving the command stuck, and the test hangs. Instead, make the default "wait_for_input" of the run_command infinite, and allow the user to override it if they want with a default timeout option "RUN_TIMEOUT". But this fixes the hang that happens when the pipe is full and the ssh session never exits. Cc: [email protected] Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command") Signed-off-by: Steven Rostedt <[email protected]>
2023-02-20ktest.pl: Give back console on Ctrt^C on monitorSteven Rostedt1-0/+3
When monitoring the console output, the stdout is being redirected to do so. If Ctrl^C is hit during this mode, the stdout is not back to the console, the user does not see anything they type (no echo). Add "end_monitor" to the SIGINT interrupt handler to give back the console on Ctrl^C. Cc: [email protected] Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty") Signed-off-by: Steven Rostedt <[email protected]>
2023-02-20ktest.pl: Fix missing "end_monitor" when machine check failsSteven Rostedt1-1/+2
In the "reboot" command, it does a check of the machine to see if it is still alive with a simple "ssh echo" command. If it fails, it will assume that a normal "ssh reboot" is not possible and force a power cycle. In this case, the "start_monitor" is executed, but the "end_monitor" is not, and this causes the screen will not be given back to the console. That is, after the test, a "reset" command needs to be performed, as "echo" is turned off. Cc: [email protected] Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt <[email protected]>
2023-02-20self-tests: more rps self testsPaolo Abeni1-12/+29
Explicitly check for child netns and main ns independency Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-20Merge tag 'kvmarm-6.3' of ↵Paolo Bonzini19-10/+1110
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.3 - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place. - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company). - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests. - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM. - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested. - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems. - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor. - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host. - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer This also drags in arm64's 'for-next/sme2' branch, because both it and the PSCI relay changes touch the EL2 initialization code.
2023-02-20selftests/net: Interpret UDP_GRO cmsg data as an int valueJakub Sitnicki1-4/+2
Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an int (see udp_cmsg_recv), not a u16 value, as strace confirms: recvmsg(8, {msg_name=..., msg_iov=[{iov_base="\0\0..."..., iov_len=96000}], msg_iovlen=1, msg_control=[{cmsg_len=20, <-- sizeof(cmsghdr) + 4 cmsg_level=SOL_UDP, cmsg_type=0x68}], <-- UDP_GRO msg_controllen=24, msg_flags=0}, 0) = 11200 Interpreting the data as an u16 value won't work on big-endian platforms. Since it is too late to back out of this API decision [1], fix the test. [1]: https://lore.kernel.org/netdev/[email protected]/ Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Jakub Sitnicki <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-17selftests/bpf: Add bpf_fib_lookup testMartin KaFai Lau2-0/+209
This patch tests the bpf_fib_lookup helper when looking up a neigh in NUD_FAILED and NUD_STALE state. It also adds test for the new BPF_FIB_LOOKUP_SKIP_NEIGH flag. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-17Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"Martin KaFai Lau1-4/+3
This reverts commit 6c20822fada1b8adb77fa450d03a0d449686a4a9. build bot failed on arch with different cache line size: https://lore.kernel.org/bpf/[email protected]/ Signed-off-by: Martin KaFai Lau <[email protected]>
2023-02-17selftests/bpf: Add global subprog context passing testsAndrii Nakryiko2-0/+106
Add tests validating that it's possible to pass context arguments into global subprogs for various types of programs, including a particularly tricky KPROBE programs (which cover kprobes, uprobes, USDTs, a vast and important class of programs). Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-17selftests/bpf: Convert test_global_funcs test to test_loader frameworkAndrii Nakryiko18-123/+174
Convert 17 test_global_funcs subtests into test_loader framework for easier maintenance and more declarative way to define expected failures/successes. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-6/+177
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <[email protected]>
2023-02-16Fix typos in selftest/bpf filesTaichi Nishimura10-13/+13
Run spell checker on files in selftest/bpf and fixed typos. Signed-off-by: Taichi Nishimura <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-16selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()Ilya Leoshkevich34-101/+109
Use the new type-safe wrappers around bpf_obj_get_info_by_fd(). Fix a prog/map mixup in prog_holds_map(). Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-16Merge tag 'net-6.2-final' of ↵Linus Torvalds2-2/+177
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Fixes from the main networking tree only, probably because all sub-trees have backed off and haven't submitted their changes. None of the fixes here are particularly scary and no outstanding regressions. In an ideal world the "current release" sections would be empty at this stage but that never happens. Current release - regressions: - fix unwanted sign extension in netdev_stats_to_stats64() Current release - new code bugs: - initialize net->notrefcnt_tracker earlier - devlink: fix netdev notifier chain corruption - nfp: make sure mbox accesses in IPsec code are atomic - ice: fix check for weight and priority of a scheduling node Previous releases - regressions: - ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop - igb: fix I2C bit banging config with external thermal sensor Previous releases - always broken: - sched: tcindex: update imperfect hash filters respecting rcu - mpls: fix stale pointer if allocation fails during device rename - dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions - remove WARN_ON_ONCE(sk->sk_forward_alloc) from sk_stream_kill_queues() - af_key: fix heap information leak - ipv6: fix socket connection with DSCP (correct interpretation of the tclass field vs fib rule matching) - tipc: fix kernel warning when sending SYN message - vmxnet3: read RSS information from the correct descriptor (eop)" * tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) devlink: Fix netdev notifier chain corruption igb: conditionalize I2C bit banging on external thermal sensor support net: mpls: fix stale pointer if allocation fails during device rename net/sched: tcindex: search key must be 16 bits tipc: fix kernel warning when sending SYN message igb: Fix PPS input and output using 3rd and 4th SDP net: use a bounce buffer for copying skb->mark ixgbe: add double of VLAN header when computing the max MTU i40e: add double of VLAN header when computing the max MTU ixgbe: allow to increase MTU to 3K with XDP enabled net: stmmac: Restrict warning on disabling DMA store and fwd mode net/sched: act_ctinfo: use percpu stats net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence ice: fix lost multicast packets in promisc mode ice: Fix check for weight and priority of a scheduling node bnxt_en: Fix mqprio and XDP ring checking logic net: Fix unwanted sign extension in netdev_stats_to_stats64() net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path net: openvswitch: fix possible memory leak in ovs_meter_cmd_set() af_key: Fix heap information leak ...
2023-02-16Merge branch 'topic/apple-gmux' into for-nextTakashi Iwai41-250/+886
Pull vga_switcheroo fix for Macs Signed-off-by: Takashi Iwai <[email protected]>
2023-02-16selftests: seg6: add selftest for PSP flavor in SRv6 End behaviorAndrea Mayer2-0/+870
This selftest is designed for testing the PSP flavor in SRv6 End behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs. The test makes use of the SRv6 End behavior and of the PSP flavor needed for removing the SRH from the IPv6 header at the penultimate node. The correct execution of the behavior is verified through reachability tests carried out between hosts. Signed-off-by: Andrea Mayer <[email protected]> Signed-off-by: Paolo Lungaroni <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-16net/sched: Retire rsvp classifierJamal Hadi Salim1-203/+0
The rsvp classifier has served us well for about a quarter of a century but has has not been getting much maintenance attention due to lack of known users. Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-16net/sched: Retire tcindex classifierJamal Hadi Salim1-227/+0
The tcindex classifier has served us well for about a quarter of a century but has not been getting much TLC due to lack of known users. Most recently it has become easy prey to syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-16net/sched: Retire dsmark qdiscJamal Hadi Salim1-140/+0
The dsmark qdisc has served us well over the years for diffserv but has not been getting much attention due to other more popular approaches to do diffserv services. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-16net/sched: Retire ATM qdiscJamal Hadi Salim1-94/+0
The ATM qdisc has served us well over the years but has not been getting much TLC due to lack of known users. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-16net/sched: Retire CBQ qdiscJamal Hadi Salim1-184/+0
While this amazing qdisc has served us well over the years it has not been getting any tender love and care and has bitrotted over time. It has become mostly a shooting target for syzkaller lately. For this reason, we are retiring it. Goodbye CBQ - we loved you. Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-15selftests: forwarding: tc_actions: cleanup temporary files when test is abortedDavide Caratti1-6/+10
remove temporary files created by 'mirred_egress_to_ingress_tcp' test in the cleanup() handler. Also, change variable names to avoid clashing with globals from lib.sh. Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-15bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMESAlexander Lobakin1-3/+4
&xdp_buff and &xdp_frame are bound in a way that xdp_buff->data_hard_start == xdp_frame It's always the case and e.g. xdp_convert_buff_to_frame() relies on this. IOW, the following: for (u32 i = 0; i < 0xdead; i++) { xdpf = xdp_convert_buff_to_frame(&xdp); xdp_convert_frame_to_buff(xdpf, &xdp); } shouldn't ever modify @xdpf's contents or the pointer itself. However, "live packet" code wrongly treats &xdp_frame as part of its context placed *before* the data_hard_start. With such flow, data_hard_start is sizeof(*xdpf) off to the right and no longer points to the XDP frame. Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several places and praying that there are no more miscalcs left somewhere in the code, unionize ::frm with ::data in a flex array, so that both starts pointing to the actual data_hard_start and the XDP frame actually starts being a part of it, i.e. a part of the headroom, not the context. A nice side effect is that the maximum frame size for this mode gets increased by 40 bytes, as xdp_buff::frame_sz includes everything from data_hard_start (-> includes xdpf already) to the end of XDP/skb shared info. Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it hardcoded for 64 bit && 4k pages, it can be made more flexible later on. Minor: align `&head->data` with how `head->frm` is assigned for consistency. Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for clarity. (was found while testing XDP traffic generator on ice, which calls xdp_convert_frame_to_buff() for each XDP frame) Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-02-15selftest/bpf/benchs: Add benchmark for hashmap lookupsAnton Protopopov4-1/+354
Add a new benchmark which measures hashmap lookup operations speed. A user can control the following parameters of the benchmark: * key_size (max 1024): the key size to use * max_entries: the hashmap max entries * nr_entries: the number of entries to insert/lookup * nr_loops: the number of loops for the benchmark * map_flags The hashmap flags passed to BPF_MAP_CREATE The BPF program performing the benchmarks calls two nested bpf_loop: bpf_loop(nr_loops/nr_entries) bpf_loop(nr_entries) bpf_map_lookup() So the nr_loops determines the number of actual map lookups. All lookups are successful. Example (the output is generated on a AMD Ryzen 9 3950X machine): for nr_entries in `seq 4096 4096 65536`; do echo -n "$((nr_entries*100/65536))% full: "; sudo ./bench -d2 -a bpf-hashmap-lookup --key_size=4 --nr_entries=$nr_entries --max_entries=65536 --nr_loops=1000000 --map_flags=0x40 | grep cpu; done 6% full: cpu01: lookup 50.739M ± 0.018M events/sec (approximated from 32 samples of ~19ms) 12% full: cpu01: lookup 47.751M ± 0.015M events/sec (approximated from 32 samples of ~20ms) 18% full: cpu01: lookup 45.153M ± 0.013M events/sec (approximated from 32 samples of ~22ms) 25% full: cpu01: lookup 43.826M ± 0.014M events/sec (approximated from 32 samples of ~22ms) 31% full: cpu01: lookup 41.971M ± 0.012M events/sec (approximated from 32 samples of ~23ms) 37% full: cpu01: lookup 41.034M ± 0.015M events/sec (approximated from 32 samples of ~24ms) 43% full: cpu01: lookup 39.946M ± 0.012M events/sec (approximated from 32 samples of ~25ms) 50% full: cpu01: lookup 38.256M ± 0.014M events/sec (approximated from 32 samples of ~26ms) 56% full: cpu01: lookup 36.580M ± 0.018M events/sec (approximated from 32 samples of ~27ms) 62% full: cpu01: lookup 36.252M ± 0.012M events/sec (approximated from 32 samples of ~27ms) 68% full: cpu01: lookup 35.200M ± 0.012M events/sec (approximated from 32 samples of ~28ms) 75% full: cpu01: lookup 34.061M ± 0.009M events/sec (approximated from 32 samples of ~29ms) 81% full: cpu01: lookup 34.374M ± 0.010M events/sec (approximated from 32 samples of ~29ms) 87% full: cpu01: lookup 33.244M ± 0.011M events/sec (approximated from 32 samples of ~30ms) 93% full: cpu01: lookup 32.182M ± 0.013M events/sec (approximated from 32 samples of ~31ms) 100% full: cpu01: lookup 31.497M ± 0.016M events/sec (approximated from 32 samples of ~31ms) Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftest/bpf/benchs: Print less if the quiet option is setAnton Protopopov1-2/+4
The bench utility will print Setting up benchmark '<bench-name>'... Benchmark '<bench-name>' started. on startup to stdout. Suppress this output if --quiet option if given. This makes it simpler to parse benchmark output by a script. Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftest/bpf/benchs: Make quiet option commonAnton Protopopov4-15/+8
The "local-storage-tasks-trace" benchmark has a `--quiet` option. Move it to the list of common options, so that the main code and other benchmarks can use (new) env.quiet variable. Patch the run_bench_local_storage_rcu_tasks_trace.sh helper script accordingly. Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftest/bpf/benchs: Remove an unused headerAnton Protopopov1-1/+0
The benchs/bench_bpf_hashmap_full_update.c doesn't set a custom argp, so it shouldn't include the <argp.h> header. Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftest/bpf/benchs: Enhance argp parsingAnton Protopopov8-10/+51
To parse command line the bench utility uses the argp_parse() function. This function takes as an argument a parent 'struct argp' structure which defines common command line options and an array of children 'struct argp' structures which defines additional command line options for particular benchmarks. This implementation doesn't allow benchmarks to share option names, e.g., if two benchmarks want to use, say, the --option option, then only one of them will succeed (the first one encountered in the array). This will be convenient if same option names could be used in different benchmarks (with the same semantics, e.g., --nr_loops=N). Fix this by calling the argp_parse() function twice. The first call is the same as it was before, with all children argps, and helps to find the benchmark name and to print a combined help message if anything is wrong. Given the name, we can call the argp_parse the second time, but now the children array points only to a correct benchmark thus always calling the correct parsers. (If there's no a specific list of arguments, then only one call to argp_parse will be done.) Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftest/bpf/benchs: Make a function static in bpf_hashmap_full_updateAnton Protopopov1-1/+1
The hashmap_report_final callback function defined in the benchs/bench_bpf_hashmap_full_update.c file should be static. Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftest/bpf/benchs: Fix a typo in bpf_hashmap_full_updateAnton Protopopov2-2/+2
To call the bpf_hashmap_full_update benchmark, one should say: bench bpf-hashmap-ful-update The patch adds a missing 'l' to the benchmark name. Signed-off-by: Anton Protopopov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-02-15selftests/bpf: Add test case for element reuse in htab mapHou Tao2-0/+120
The reinitialization of spin-lock in map value after immediate reuse may corrupt lookup with BPF_F_LOCK flag and result in hard lock-up, so add one test case to demonstrate the problem. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-02-15selftests/bpf: check if BPF_ST with variable offset preserves STACK_ZEROEduard Zingerman1-0/+30
A test case to verify that variable offset BPF_ST instruction preserves STACK_ZERO marks when writes zeros, e.g. in the following situation: *(u64*)(r10 - 8) = 0 ; STACK_ZERO marks for fp[-8] r0 = random(-7, -1) ; some random number in range of [-7, -1] r0 += r10 ; r0 is now variable offset pointer to stack *(u8*)(r0) = 0 ; BPF_ST writing zero, STACK_ZERO mark for ; fp[-8] should be preserved. Signed-off-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.