aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-09-23Merge tag 'kvm-s390-master-6.0-2' of ↵Paolo Bonzini7-115/+263
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD More pci fixes Fix for a code analyser warning
2022-09-23selftests/bonding: re-add lladdr target testMatthieu Baerts1-0/+1
It looks like this test has been accidentally dropped when resolving conflicts in this Makefile. Most probably because there were 3 different patches modifying this file in parallel: commit 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") commit bbb774d921e2 ("net: Add tests for bonding and team address list management") commit 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") The first one was applied in 'net-next' while the two other ones were recently applied in the 'net' tree. But that's alright, easy to fix by re-adding the missing one! Fixes: 0140a7168f8b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Matthieu Baerts <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-23selftests/livepatch: normalize sysctl error messageJoe Lawrence1-1/+1
The livepatch kselftests rely on comparing expected and actual output from such commands as sysctl. A recent commit in procps-ng v4.0.0 [1] changed sysctl's output to emit key pathnames like: sysctl: setting key "/proc/sys/kernel/ftrace_enabled": Device or resource busy versus previous dotted output: sysctl: setting key "kernel.ftrace_enabled": Device or resource busy The modification in output was later reverted [2], but since the change has been tagged in procps-ng v4.0.0, update the livepatch kselftest to handle either case. [1] https://gitlab.com/procps-ng/procps/-/commit/6389deca5bf667f5fab5912acde78ba8e0febbc7 [2] https://gitlab.com/procps-ng/procps/-/commit/b159c198c9160a8eb13254e2b631d0035b9b542c Reported-by: Dennis(Zhuoheng) Li <[email protected]> Signed-off-by: Joe Lawrence <[email protected]> Reviewed-by: Kamalesh Babulal <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-22selftests/tc-testing: add show class case for red qdiscZhengchao Shao1-0/+23
Test 290a: Show RED class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add show class case for prio qdiscZhengchao Shao1-0/+20
Test 2410: Show prio class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add show class case for mq qdiscZhengchao Shao1-1/+23
Test 1023: Show mq class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add show class case for ingress qdiscZhengchao Shao1-0/+20
Test 0521: Show ingress class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for qfq qdiscZhengchao Shao1-0/+145
Test 0582: Create QFQ with default setting Test c9a3: Create QFQ with class weight setting Test 8452: Create QFQ with class maxpkt setting Test d920: Create QFQ with multiple class setting Test 0548: Delete QFQ with handle Test 5901: Show QFQ class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for netem qdiscZhengchao Shao1-0/+372
Test cb28: Create NETEM with default setting Test a089: Create NETEM with limit flag Test 3449: Create NETEM with delay time Test 3782: Create NETEM with distribution and corrupt flag Test 2b82: Create NETEM with distribution and duplicate flag Test a932: Create NETEM with distribution and loss flag Test e01a: Create NETEM with distribution and loss state flag Test ba29: Create NETEM with loss gemodel flag Test 0492: Create NETEM with reorder flag Test 7862: Create NETEM with rate limit Test 7235: Create NETEM with multiple slot rate Test 5439: Create NETEM with multiple slot setting Test 5029: Change NETEM with loss state Test 3785: Replace NETEM with delay time Test 4502: Delete NETEM with handle Test 0785: Show NETEM class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for multiq qdiscZhengchao Shao1-0/+114
Test 20ba: Add multiq Qdisc to multi-queue device (8 queues) Test 4301: List multiq Class Test 7832: Delete nonexistent multiq Qdisc Test 2891: Delete multiq Qdisc twice Test 1329: Add multiq Qdisc to single-queue device Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for mqprio qdiscZhengchao Shao1-0/+114
Test 9903: Add mqprio Qdisc to multi-queue device (8 queues) Test 453a: Delete nonexistent mqprio Qdisc Test 5292: Delete mqprio Qdisc twice Test 45a9: Add mqprio Qdisc to single-queue device Test 2ba9: Show mqprio class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for htb qdiscZhengchao Shao1-0/+285
Test 0904: Create HTB with default setting Test 3906: Create HTB with default-N setting Test 8492: Create HTB with r2q setting Test 9502: Create HTB with direct_qlen setting Test b924: Create HTB with class rate and burst setting Test 4359: Create HTB with class mpu setting Test 9048: Create HTB with class prio setting Test 4994: Create HTB with class ceil setting Test 9523: Create HTB with class cburst setting Test 5353: Create HTB with class mtu setting Test 346a: Create HTB with class quantum setting Test 303a: Delete HTB with handle Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for hfsc qdiscZhengchao Shao1-0/+167
Test 3254: Create HFSC with default setting Test 0289: Create HFSC with class sc and ul rate setting Test 846a: Create HFSC with class sc umax and dmax setting Test 5413: Create HFSC with class rt and ls rate setting Test 9312: Create HFSC with class rt umax and dmax setting Test 6931: Delete HFSC with handle Test 8436: Show HFSC class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for fq_codel qdiscZhengchao Shao1-0/+326
Test 4957: Create FQ_CODEL with default setting Test 7621: Create FQ_CODEL with limit setting Test 6871: Create FQ_CODEL with memory_limit setting Test 5636: Create FQ_CODEL with target setting Test 630a: Create FQ_CODEL with interval setting Test 4324: Create FQ_CODEL with quantum setting Test b190: Create FQ_CODEL with noecn flag Test 5381: Create FQ_CODEL with ce_threshold setting Test c9d2: Create FQ_CODEL with drop_batch setting Test 523b: Create FQ_CODEL with multiple setting Test 9283: Replace FQ_CODEL with noecn setting Test 3459: Change FQ_CODEL with limit setting Test 0128: Delete FQ_CODEL with handle Test 0435: Show FQ_CODEL class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for dsmark qdiscZhengchao Shao1-0/+140
Test 6345: Create DSMARK with default setting Test 3462: Create DSMARK with default_index setting Test ca95: Create DSMARK with set_tc_index flag Test a950: Create DSMARK with multiple setting Test 4092: Delete DSMARK with handle Test 5930: Show DSMARK class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for drr qdiscZhengchao Shao1-0/+71
Test 0385: Create DRR with default setting Test 2375: Delete DRR with handle Test 3092: Show DRR class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for cbs qdiscZhengchao Shao1-0/+234
Test 1820: Create CBS with default setting Test 1532: Create CBS with hicredit setting Test 2078: Create CBS with locredit setting Test 9271: Create CBS with sendslope setting Test 0482: Create CBS with idleslope setting Test e8f3: Create CBS with multiple setting Test 23c9: Replace CBS with sendslope setting Test a07a: Change CBS with idleslope setting Test 43b3: Delete CBS with handle Test 9472: Show CBS class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for cbq qdiscZhengchao Shao1-0/+184
Test 3460: Create CBQ with default setting Test 0592: Create CBQ with mpu Test 4684: Create CBQ with valid cell num Test 4345: Create CBQ with invalid cell num Test 4525: Create CBQ with valid ewma Test 6784: Create CBQ with invalid ewma Test 5468: Delete CBQ with handle Test 492a: Show CBQ class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/tc-testing: add selftests for cake qdiscZhengchao Shao1-0/+487
Test 1212: Create CAKE with default setting Test 3281: Create CAKE with bandwidth limit Test c940: Create CAKE with autorate-ingress flag Test 2310: Create CAKE with rtt time Test 2385: Create CAKE with besteffort flag Test a032: Create CAKE with diffserv8 flag Test 2349: Create CAKE with diffserv4 flag Test 8472: Create CAKE with flowblind flag Test 2341: Create CAKE with dsthost and nat flag Test 5134: Create CAKE with wash flag Test 2302: Create CAKE with flowblind and no-split-gso flag Test 0768: Create CAKE with dual-srchost and ack-filter flag Test 0238: Create CAKE with dual-dsthost and ack-filter-aggressive flag Test 6572: Create CAKE with memlimit and ptm flag Test 2436: Create CAKE with fwmark and atm flag Test 3984: Create CAKE with overhead and mpu Test 5421: Create CAKE with conservative and ingress flag Test 6854: Delete CAKE with conservative and ingress flag Test 2342: Replace CAKE with mpu Test 2313: Change CAKE with mpu Test 4365: Show CAKE class Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests/bpf: Free the allocated resources after test case succeedsHou Tao4-9/+21
Free the created fd or allocated bpf_object after test case succeeds, else there will be resource leaks. Spotted by using address sanitizer and checking the content of /proc/$pid/fd directory. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2022-09-22selftests/bpf: Destroy the skeleton when CONFIG_PREEMPT is offHou Tao1-0/+1
Destroy the created skeleton when CONFIG_PREEMPT is off, else will be resource leak. Fixes: 73b97bc78b32 ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy") Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2022-09-22selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.cJinrong Liang1-1/+1
The following warning appears when executing: make -C tools/testing/selftests/kvm rseq_test.c: In function ‘main’: rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration] (void *)(unsigned long)gettid()); ^~~~~~ getgid /usr/bin/ld: /tmp/ccr5mMko.o: in function `main': ../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid' collect2: error: ld returned 1 exit status make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1 Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it. More subsequent reuse may cause it to be wrapped in a lib file. Signed-off-by: Jinrong Liang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-22selftests/bpf: Add liburandom_read.so to TEST_GEN_FILESYauheni Kaliuta1-0/+1
Added urandom_read shared lib is missing from the list of installed files what makes urandom_read test after `make install` or `make gen_tar` broken. Add the library to TEST_GEN_FILES. The names in the list do not contain $(OUTPUT) since it's added by lib.mk code. Fixes: 00a0fa2d7d49 ("selftests/bpf: Add urandom_read shared lib and USDTs") Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski15-106/+435
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/[email protected]/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/[email protected]/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/[email protected]/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22kselftest/arm64: Fix typo in hwcap checkMark Brown1-1/+1
We use a local variable hwcap to refer to the element of the hwcaps array which we are currently checking. When checking for the relevant hwcap bit being set in testing we were dereferencing hwcaps rather than hwcap in fetching the AT_HWCAP to use, which is perfectly valid C but means we were always checking the bit was set in the hwcap for whichever feature is first in the array. Remove the stray s. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-09-22Merge tag 'net-6.0-rc7' of ↵Linus Torvalds13-14/+433
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wifi, netfilter and can. A handful of awaited fixes here - revert of the FEC changes, bluetooth fix, fixes for iwlwifi spew. We added a warning in PHY/MDIO code which is triggering on a couple of platforms in a false-positive-ish way. If we can't iron that out over the week we'll drop it and re-add for 6.1. I've added a new "follow up fixes" section for fixes to fixes in 6.0-rcs but it may actually give the false impression that those are problematic or that more testing time would have caught them. So likely a one time thing. Follow up fixes: - nf_tables_addchain: fix nft_counters_enabled underflow - ebtables: fix memory leak when blob is malformed - nf_ct_ftp: fix deadlock when nat rewrite is needed Current release - regressions: - Revert "fec: Restart PPS after link state change" and the related "net: fec: Use a spinlock to guard `fep->ptp_clk_on`" - Bluetooth: fix HCIGETDEVINFO regression - wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2 - mptcp: fix fwd memory accounting on coalesce - rwlock removal fall out: - ipmr: always call ip{,6}_mr_forward() from RCU read-side critical section - ipv6: fix crash when IPv6 is administratively disabled - tcp: read multiple skbs in tcp_read_skb() - mdio_bus_phy_resume state warning fallout: - eth: ravb: fix PHY state warning splat during system resume - eth: sh_eth: fix PHY state warning splat during system resume Current release - new code bugs: - wifi: iwlwifi: don't spam logs with NSS>2 messages - eth: mtk_eth_soc: enable XDP support just for MT7986 SoC Previous releases - regressions: - bonding: fix NULL deref in bond_rr_gen_slave_id - wifi: iwlwifi: mark IWLMEI as broken Previous releases - always broken: - nf_conntrack helpers: - irc: tighten matching on DCC message - sip: fix ct_sip_walk_headers - osf: fix possible bogus match in nf_osf_find() - ipvlan: fix out-of-bound bugs caused by unset skb->mac_header - core: fix flow symmetric hash - bonding, team: unsync device addresses on ndo_stop - phy: micrel: fix shared interrupt on LAN8814" * tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) selftests: forwarding: add shebang for sch_red.sh bnxt: prevent skb UAF after handing over to PTP worker net: marvell: Fix refcounting bugs in prestera_port_sfp_bind() net: sched: fix possible refcount leak in tc_new_tfilter() net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD udp: Use WARN_ON_ONCE() in udp_read_skb() selftests: bonding: cause oops in bond_rr_gen_slave_id bonding: fix NULL deref in bond_rr_gen_slave_id net: phy: micrel: fix shared interrupt on LAN8814 net/smc: Stop the CLC flow if no link to map buffers on ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient net: atlantic: fix potential memory leak in aq_ndev_close() can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported can: gs_usb: gs_can_open(): fix race dev->can.state condition can: flexcan: flexcan_mailbox_read() fix return value for drop = true net: sh_eth: Fix PHY state warning splat during system resume net: ravb: Fix PHY state warning splat during system resume netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed netfilter: ebtables: fix memory leak when blob is malformed netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() ...
2022-09-22selftests: forwarding: add shebang for sch_red.shHangbin Liu1-0/+1
RHEL/Fedora RPM build checks are stricter, and complain when executable files don't have a shebang line, e.g. *** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit Fix it by adding shebang line. Fixes: 6cf0291f9517 ("selftests: forwarding: Add a RED test for SW datapath") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-22selftests: bonding: cause oops in bond_rr_gen_slave_idJonathan Toppins2-1/+51
This bonding selftest used to cause a kernel oops on aarch64 and should be architectures agnostic. Signed-off-by: Jonathan Toppins <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21selftests/bpf: add ability to filter programs in veristatAndrii Nakryiko2-2/+227
Add -f (--filter) argument which accepts glob-based filters for narrowing down what BPF object files and programs within them should be processed by veristat. This filtering applies both to comparison and main (verification) mode. Filter can be of two forms: - file (object) filter: 'strobemeta*'; in this case all the programs within matching files are implicitly allowed (or denied, depending if it's positive or negative rule, see below); - file and prog filter: 'strobemeta*/*unroll*' will further filter programs within matching files to only allow those program names that match '*unroll*' glob. As mentioned, filters can be positive (allowlisting) and negative (denylisting). Negative filters should start with '!': '!strobemeta*' will deny any filename which basename starts with "strobemeta". Further, one extra special syntax is supported to allow more convenient use in practice. Instead of specifying rule on the command line, veristat allows to specify file that contains rules, both positive and negative, one line per one filter. This is achieved with -f @<filepath> use, where <filepath> points to a text file containing rules (negative and positive rules can be mixed). For convenience empty lines and lines starting with '#' are ignored. This feature is useful to have some pre-canned list of object files and program names that are tested repeatedly, allowing to check in a list of rules and quickly specify them on the command line. As a demonstration (and a short cut for nearest future), create a small list of "interesting" BPF object files from selftests/bpf and commit it as veristat.cfg. It currently includes 73 programs, most of which are the most complex and largest BPF programs in selftests, as judged by total verified instruction count and verifier states total. If there is overlap between positive or negative filters, negative filter takes precedence (denylisting is stronger than allowlisting). If no allow filter is specified, veristat implicitly assumes '*/*' rule. If no deny rule is specified, veristat (logically) assumes no negative filters. Also note that -f (just like -e and -s) can be specified multiple times and their effect is cumulative. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: add comparison mode to veristatAndrii Nakryiko1-51/+492
Add ability to compare and contrast two veristat runs, previously recorded with veristat using CSV output format. When veristat is called with -C (--compare) flag, veristat expects exactly two input files specified, both should be in CSV format. Expectation is that it's output from previous veristat runs, but as long as column names and formats match, it should just work. First CSV file is designated as a "baseline" provided, and the second one is comparison (experiment) data set. Establishing baseline matters later when calculating difference percentages, see below. Veristat parses these two CSV files and "reconstructs" verifier stats (it could be just a subset of all possible stats). File and program names are mandatory as they are used as joining key (these two "stats" are designated as "key stats" in the code). Veristat currently enforces that the set of stats recorded in both CSV has to exactly match, down to exact order. This is just a simplifying condition which can be lifted with a bit of additional pre-processing to reorded stat specs internally, which I didn't bother doing, yet. For all the non-key stats, veristat will output three columns: one for baseline data, one for comparison data, and one with an absolute and relative percentage difference. If either baseline or comparison values are missing (that is, respective CSV file doesn't have a row with *exactly* matching file and program name), those values are assumed to be empty or zero. In such case relative percentages are forced to +100% or -100% output, for consistency with a typical case. Veristat's -e (--emit) and -s (--sort) specs still apply, so even if CSV contains lots of stats, user can request to compare only a subset of them (and specify desired column order as well). Similarly, both CSV and human-readable table output is honored. Note that input is currently always expected to be CSV. Here's an example shell session, recording data for biosnoop tool on two different kernels and comparing them afterwards, outputting data in table format. # on slightly older production kernel $ sudo ./veristat biosnoop_bpf.o File Program Verdict Duration (us) Total insns Total states Peak states -------------- ------------------------ ------- ------------- ----------- ------------ ----------- biosnoop_bpf.o blk_account_io_merge_bio success 37 24 1 1 biosnoop_bpf.o blk_account_io_start failure 0 0 0 0 biosnoop_bpf.o block_rq_complete success 76 104 6 6 biosnoop_bpf.o block_rq_insert success 83 85 7 7 biosnoop_bpf.o block_rq_issue success 79 85 7 7 -------------- ------------------------ ------- ------------- ----------- ------------ ----------- Done. Processed 1 object files, 5 programs. $ sudo ./veristat ~/local/tmp/fbcode-bpf-objs/biosnoop_bpf.o -o csv > baseline.csv $ cat baseline.csv file_name,prog_name,verdict,duration,total_insns,total_states,peak_states biosnoop_bpf.o,blk_account_io_merge_bio,success,36,24,1,1 biosnoop_bpf.o,blk_account_io_start,failure,0,0,0,0 biosnoop_bpf.o,block_rq_complete,success,82,104,6,6 biosnoop_bpf.o,block_rq_insert,success,78,85,7,7 biosnoop_bpf.o,block_rq_issue,success,74,85,7,7 # on latest bpf-next kernel $ sudo ./veristat biosnoop_bpf.o File Program Verdict Duration (us) Total insns Total states Peak states -------------- ------------------------ ------- ------------- ----------- ------------ ----------- biosnoop_bpf.o blk_account_io_merge_bio success 31 24 1 1 biosnoop_bpf.o blk_account_io_start failure 0 0 0 0 biosnoop_bpf.o block_rq_complete success 76 104 6 6 biosnoop_bpf.o block_rq_insert success 83 91 7 7 biosnoop_bpf.o block_rq_issue success 74 91 7 7 -------------- ------------------------ ------- ------------- ----------- ------------ ----------- Done. Processed 1 object files, 5 programs. $ sudo ./veristat biosnoop_bpf.o -o csv > comparison.csv $ cat comparison.csv file_name,prog_name,verdict,duration,total_insns,total_states,peak_states biosnoop_bpf.o,blk_account_io_merge_bio,success,71,24,1,1 biosnoop_bpf.o,blk_account_io_start,failure,0,0,0,0 biosnoop_bpf.o,block_rq_complete,success,82,104,6,6 biosnoop_bpf.o,block_rq_insert,success,83,91,7,7 biosnoop_bpf.o,block_rq_issue,success,87,91,7,7 # now let's compare with human-readable output (note that no sudo needed) # we also ignore verification duration in this case to shortned output $ ./veristat -C baseline.csv comparison.csv -e file,prog,verdict,insns File Program Verdict (A) Verdict (B) Verdict (DIFF) Total insns (A) Total insns (B) Total insns (DIFF) -------------- ------------------------ ----------- ----------- -------------- --------------- --------------- ------------------ biosnoop_bpf.o blk_account_io_merge_bio success success MATCH 24 24 +0 (+0.00%) biosnoop_bpf.o blk_account_io_start failure failure MATCH 0 0 +0 (+100.00%) biosnoop_bpf.o block_rq_complete success success MATCH 104 104 +0 (+0.00%) biosnoop_bpf.o block_rq_insert success success MATCH 91 85 -6 (-6.59%) biosnoop_bpf.o block_rq_issue success success MATCH 91 85 -6 (-6.59%) -------------- ------------------------ ----------- ----------- -------------- --------------- --------------- ------------------ While not particularly exciting example (it turned out to be kind of hard to quickly find a nice example with significant difference just because of kernel version bump), it should demonstrate main features. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: add CSV output mode for veristatAndrii Nakryiko1-36/+75
Teach veristat to output results as CSV table for easier programmatic processing. Change what was --output/-o argument to now be --emit/-e. And then use --output-format/-o <fmt> to specify output format. Currently "table" and "csv" is supported, table being default. For CSV output mode veristat is using spec identifiers as column names. E.g., instead of "Total states" veristat uses "total_states" as a CSV header name. Internally veristat recognizes three formats, one of them (RESFMT_TABLE_CALCLEN) is a special format instructing veristat to calculate column widths for table output. This felt a bit cleaner and more uniform than either creating separate functions just for this. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: fix double bpf_object__close() in veristateAndrii Nakryiko1-1/+0
bpf_object__close(obj) is called twice for BPF object files with single BPF program in it. This causes crash. Fix this by not calling bpf_object__close() unnecessarily. Fixes: c8bc5e050976 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files") Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: add tests for bpf_ct_set_nat_info kfuncLorenzo Bianconi3-3/+35
Introduce self-tests for bpf_ct_set_nat_info kfunc used to set the source or destination nat addresses/ports. Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/803e33294e247744d466943105879414344d3235.1663778601.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Add tests for dynamic pointers parameters in kfuncsRoberto Sassu3-0/+259
Add tests to ensure that only supported dynamic pointer types are accepted, that the passed argument is actually a dynamic pointer, that the passed argument is a pointer to the stack, and that bpf_verify_pkcs7_signature() correctly handles dynamic pointers with data set to NULL. The tests are currently in the deny list for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfuncRoberto Sassu7-8/+610
Perform several tests to ensure the correct implementation of the bpf_verify_pkcs7_signature() kfunc. Do the tests with data signed with a generated testing key (by using sign-file from scripts/) and with the tcp_bic.ko kernel module if it is found in the system. The test does not fail if tcp_bic.ko is not found. First, perform an unsuccessful signature verification without data. Second, perform a successful signature verification with the session keyring and a new one created for testing. Then, ensure that permission and validation checks are done properly on the keyring provided to bpf_verify_pkcs7_signature(), despite those checks were deferred at the time the keyring was retrieved with bpf_lookup_user_key(). The tests expect to encounter an error if the Search permission is removed from the keyring, or the keyring is expired. Finally, perform a successful and unsuccessful signature verification with the keyrings with pre-determined IDs (the last test fails because the key is not in the platform keyring). The test is currently in the deny list for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Add additional tests for bpf_lookup_*_key()Roberto Sassu3-0/+159
Add a test to ensure that bpf_lookup_user_key() creates a referenced special keyring when the KEY_LOOKUP_CREATE flag is passed to this function. Ensure that the kfunc rejects invalid flags. Ensure that a keyring can be obtained from bpf_lookup_system_key() when one of the pre-determined keyring IDs is provided. The test is currently blacklisted for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Add verifier tests for bpf_lookup_*_key() and bpf_key_put()Roberto Sassu3-1/+142
Add verifier tests for bpf_lookup_*_key() and bpf_key_put(), to ensure that acquired key references stored in the bpf_key structure are released, that a non-NULL bpf_key pointer is passed to bpf_key_put(), and that key references are not leaked. Also, slightly modify test_verifier.c, to find the BTF ID of the attach point for the LSM program type (currently, it is done only for TRACING). Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests/bpf: Compile kernel with everything as built-inRoberto Sassu2-14/+14
Since the eBPF CI does not support kernel modules, change the kernel config to compile everything as built-in. Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Daniel Müller <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21bpf: Move dynptr type check to is_dynptr_type_expected()Roberto Sassu1-1/+1
Move dynptr type check to is_dynptr_type_expected() from is_dynptr_reg_valid_init(), so that callers can better determine the cause of a negative result (dynamic pointer not valid/initialized, dynamic pointer of the wrong type). It will be useful for example for BTF, to restrict which dynamic pointer types can be passed to kfuncs, as initially only the local type will be supported. Also, splitting makes the code more readable, since checking the dynamic pointer type is not necessarily related to validity and initialization. Split the validity/initialization and dynamic pointer type check also in the verifier, and adjust the expected error message in the test (a test for an unexpected dynptr type passed to a helper cannot be added due to missing suitable helpers, but this case has been tested manually). Cc: Joanne Koong <[email protected]> Cc: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Roberto Sassu <[email protected]> Acked-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-21selftests: bpf: test_kmod.sh: Pass parameters to the moduleYauheni Kaliuta1-3/+8
It's possible to specify particular tests for test_bpf.ko with module parameters. Make it possible to pass the module parameters, example: test_kmod.sh test_range=1,3 Since magnitude tests take long time it can be reasonable to skip them. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21selftests/bpf: Add selftests validating the user ringbufDavid Vernet5-0/+1185
This change includes selftests that validate the expected behavior and APIs of the new BPF_MAP_TYPE_USER_RINGBUF map type. Signed-off-by: David Vernet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-21selftests/bpf: Adapt cgroup effective query uapi changePu Lehui1-7/+4
The attach flags is meaningless for effective query and its value will always be set as 0 during effective query. Root cg's effective progs is always its attached progs, so we use non-effective query to get its progs count and attach flags. And we don't need the remain attach flags check. Fixes: b79c9fc9551b ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP") Signed-off-by: Pu Lehui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2022-09-21kselftest/arm64: Add coverage of TPIDR2_EL0 ptrace interfaceMark Brown1-3/+79
Extend the ptrace test support for NT_ARM_TLS to cover TPIDR2_EL0 - on systems that support SME the NT_ARM_TLS regset can be up to 2 elements long with the second element containing TPIDR2_EL0. On systems supporting SME we verify that this value can be read and written while on systems that do not support SME we verify correct truncation of reads and writes. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-09-21kselftest/arm64: Add test coverage for NT_ARM_TLSMark Brown3-1/+167
In preparation for extending support for NT_ARM_TLS to cover additional TPIDRs add some tests for the existing interface. Do this in a generic ptrace test program to provide a place to collect additional tests in the future. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-09-21Merge tag 'v6.0-rc6' into locking/core, to refresh the branchIngo Molnar414-7292/+25859
Signed-off-by: Ingo Molnar <[email protected]>
2022-09-20selftests/tc-testings: add list case for basic filterZhengchao Shao1-0/+47
Test 0811: Add multiple basic filter with cmp ematch u8/link layer and default action and dump them Test 5129: List basic filters Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for tcindex filterZhengchao Shao1-0/+227
Test 8293: Add tcindex filter with default action Test 7281: Add tcindex filter with hash size and pass action Test b294: Add tcindex filter with mask shift and reclassify action Test 0532: Add tcindex filter with pass_on and continue actions Test d473: Add tcindex filter with pipe action Test 2940: Add tcindex filter with miltiple actions Test 1893: List tcindex filters Test 2041: Change tcindex filter with pass action Test 9203: Replace tcindex filter with pass action Test 7957: Delete tcindex filter with drop action Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for rsvp filterZhengchao Shao1-0/+203
Test 2141: Add rsvp filter with tcp proto and specific IP address Test 5267: Add rsvp filter with udp proto and specific IP address Test 2819: Add rsvp filter with src ip and src port Test c967: Add rsvp filter with tunnelid and continue action Test 5463: Add rsvp filter with tunnel and pipe action Test 2332: Add rsvp filter with miltiple actions Test 8879: Add rsvp filter with tunnel and skp flag Test 8261: List rsvp filters Test 8989: Delete rsvp filter Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for route filterZhengchao Shao1-0/+181
Test e122: Add route filter with from and to tag Test 6573: Add route filter with fromif and to tag Test 1362: Add route filter with to flag and reclassify action Test 4720: Add route filter with from flag and continue actions Test 2812: Add route filter with form tag and pipe action Test 7994: Add route filter with miltiple actions Test 4312: List route filters Test 2634: Delete route filter with pipe action Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20selftests/tc-testings: add selftests for flow filterZhengchao Shao1-0/+623
Test 5294: Add flow filter with map key and ops Test 3514: Add flow filter with map key or ops Test 7534: Add flow filter with map key xor ops Test 4524: Add flow filter with map key rshift ops Test 0230: Add flow filter with map key addend ops Test 2344: Add flow filter with src map key Test 9304: Add flow filter with proto map key Test 9038: Add flow filter with proto-src map key Test 2a03: Add flow filter with proto-dst map key Test a073: Add flow filter with iif map key Test 3b20: Add flow filter with priority map key Test 8945: Add flow filter with mark map key Test c034: Add flow filter with nfct map key Test 0205: Add flow filter with nfct-src map key Test 5315: Add flow filter with nfct-src map key Test 7849: Add flow filter with nfct-proto-src map key Test 9902: Add flow filter with nfct-proto-dst map key Test 6742: Add flow filter with rt-classid map key Test 5432: Add flow filter with sk-uid map key Test 4134: Add flow filter with sk-gid map key Test 4522: Add flow filter with vlan-tag map key Test 4253: Add flow filter with rxhash map key Test 4452: Add flow filter with hash key list Test 4341: Add flow filter with muliple ops Test 4392: List flow filters Test 4322: Change flow filter with map key num Test 2320: Replace flow filter with map key num Test 3213: Delete flow filter with map key num Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.