aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28selftests/tc-testing: add selftests for sfq qdiscZhengchao Shao2-0/+233
Test 7482: Create SFQ with default setting Test c186: Create SFQ with limit setting Test ae23: Create SFQ with perturb setting Test a430: Create SFQ with quantum setting Test 4539: Create SFQ with divisor setting Test b089: Create SFQ with flows setting Test 99a0: Create SFQ with depth setting Test 7389: Create SFQ with headdrop setting Test 6472: Create SFQ with redflowlimit setting Test 8929: Show SFQ class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for sfb qdiscZhengchao Shao2-0/+280
Test 3294: Create SFB with default setting Test 430a: Create SFB with rehash setting Test 3410: Create SFB with db setting Test 49a0: Create SFB with limit setting Test 1241: Create SFB with max setting Test 3249: Create SFB with target setting Test 30a9: Create SFB with increment setting Test 239a: Create SFB with decrement setting Test 9301: Create SFB with penalty_rate setting Test 2a01: Create SFB with penalty_burst setting Test 3209: Change SFB with rehash setting Test 5447: Show SFB class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for plug qdiscZhengchao Shao2-0/+189
Test 3289: Create PLUG with default setting Test 0917: Create PLUG with block setting Test 483b: Create PLUG with release setting Test 4995: Create PLUG with release_indefinite setting Test 389c: Create PLUG with limit setting Test 384a: Delete PLUG with valid handle Test 439a: Replace PLUG with limit setting Test 9831: Change PLUG with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for pfifo_fast qdiscZhengchao Shao1-0/+119
Test 900c: Create pfifo_fast with default setting Test 7470: Dump pfifo_fast stats Test b974: Replace pfifo_fast with different handle Test 3240: Delete pfifo_fast with valid handle Test 4385: Delete pfifo_fast with invalid handle Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for hhf qdiscZhengchao Shao2-0/+211
Test 4812: Create HHF with default setting Test 8a92: Create HHF with limit setting Test 3491: Create HHF with quantum setting Test ba04: Create HHF with reset_timeout setting Test 4238: Create HHF with admit_bytes setting Test 839f: Create HHF with evict_timeout setting Test a044: Create HHF with non_hh_weight setting Test 32f9: Change HHF with limit setting Test 385e: Show HHF class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for gred qdiscZhengchao Shao2-0/+165
Test 8942: Create GRED with default setting Test 5783: Create GRED with grio setting Test 8a09: Create GRED with limit setting Test 48cb: Create GRED with ecn setting Test 763a: Change GRED setting Test 8309: Show GRED class Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for fq qdiscZhengchao Shao2-0/+396
Test 983b: Create FQ with default setting Test 38a1: Create FQ with limit packet setting Test 0a18: Create FQ with flow_limit setting Test 2390: Create FQ with quantum setting Test 845b: Create FQ with initial_quantum setting Test 9398: Create FQ with maxrate setting Test 342c: Create FQ with nopacing setting Test 6391: Create FQ with refill_delay setting Test 238b: Create FQ with low_rate_threshold setting Test 7582: Create FQ with orphan_mask setting Test 4894: Create FQ with timer_slack setting Test 324c: Create FQ with ce_threshold setting Test 424a: Create FQ with horizon time setting Test 89e1: Create FQ with horizon_cap setting Test 32e1: Delete FQ with valid handle Test 49b0: Replace FQ with limit setting Test 9478: Change FQ with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for etf qdiscZhengchao Shao2-0/+118
Test 34ba: Create ETF with default setting Test 438f: Create ETF with delta nanos setting Test 9041: Create ETF with deadline_mode setting Test 9a0c: Create ETF with skip_sock_check setting Test 2093: Delete ETF with valid handle Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for codel qdiscZhengchao Shao2-0/+212
Test 983a: Create CODEL with default setting Test 38aa: Create CODEL with limit packet setting Test 9178: Create CODEL with target setting Test 78d1: Create CODEL with interval setting Test 238a: Create CODEL with ecn setting Test 939c: Create CODEL with ce_threshold setting Test 8380: Delete CODEL with valid handle Test 289c: Replace CODEL with limit setting Test 0648: Change CODEL with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for choke qdiscZhengchao Shao2-0/+189
Test 8937: Create CHOKE with default setting Test 48c0: Create CHOKE with min packet setting Test 38c1: Create CHOKE with max packet setting Test 234a: Create CHOKE with ecn setting Test 4380: Create CHOKE with burst setting Test 48c7: Delete CHOKE with valid handle Test 4398: Replace CHOKE with min setting Test 0301: Change CHOKE with limit setting Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28selftests/tc-testing: add selftests for atm qdiscZhengchao Shao2-0/+96
Test 7628: Create ATM with default setting Test 390a: Delete ATM with valid handle Test 32a0: Show ATM class Test 6310: Dump ATM stats Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-27selftests/net: enable io_uring sendzc testingPavel Begunkov1-0/+1
d8b6171bd58a5 ("selftests/io_uring: test zerocopy send") added io_uring zerocopy tests but forgot to enable it in make runs. Add missing io_uring_zerocopy_tx.sh into TEST_PROGS. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/28e743602cdd54ffc49f68bbcbcbafc59ba22dc2.1664142210.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-27selftests/bpf: Fix passing arguments via function in test_kmod.shYauheni Kaliuta1-4/+5
Since the tests are run in a function $@ there actually contains the function arguments, not the script ones. Pass "$@" to the function as well. Fixes: 272d1f4cfa3c ("selftests: bpf: test_kmod.sh: Pass parameters to the module") Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-27KVM: selftests: Skip tests that require EPT when it is not availableDavid Matlack2-0/+21
Skip selftests that require EPT support in the VM when it is not available. For example, if running on a machine where kvm_intel.ept=N since KVM does not offer EPT support to guests if EPT is not supported on the host. This commit causes vmx_dirty_log_test to be skipped instead of failing on hosts where kvm_intel.ept=N. Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-27selftests: Fix the if conditions of in test_extra_filter()Wang Yufen1-1/+1
The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So if bind success or errno != EADDRINUSE, testcase should be failed. Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Signed-off-by: Wang Yufen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-09-26selftests/bpf: Fix get_func_ip offset test for CONFIG_X86_KERNEL_IBTJiri Olsa2-22/+60
With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset won't work because of the extra endbr instruction. As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection and using appropriate offset value based on that. Also removing test7 program, because it does the same as test6. Suggested-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-26bpf: Return value in kprobe get_func_ip only for entry addressJiri Olsa1-2/+2
Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: Martynas Pumputis <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-26bpf: Adjust kprobe_multi entry_ip for CONFIG_X86_KERNEL_IBTJiri Olsa1-3/+1
Martynas reported bpf_get_func_ip returning +4 address when CONFIG_X86_KERNEL_IBT option is enabled. When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction at the function entry, which screws return value of bpf_get_func_ip() helper that should return the function address. There's short term workaround for kprobe_multi bpf program made by Alexei [1], but we need this fixup also for bpf_get_attach_cookie, that returns cookie based on the entry_ip value. Moving the fixup in the fprobe handler, so both bpf_get_func_ip and bpf_get_attach_cookie get expected function address when CONFIG_X86_KERNEL_IBT option is enabled. Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip so it's clearer this is an ftrace __fentry__ ip. [1] commit 7f0059b58f02 ("selftests/bpf: Fix kprobe_multi test.") Cc: Peter Zijlstra <[email protected]> Reported-by: Martynas Pumputis <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-26mm: add merging after mremap resizeJakub Matěna1-1/+48
When mremap call results in expansion, it might be possible to merge the VMA with the next VMA which might become adjacent. This patch adds vma_merge call after the expansion is done to try and merge. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Jakub Matěna <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Liam Howlett <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Peter Zijlstra (Intel) <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Steven Rostedt <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26lib/test_maple_tree: add testing for maple treeLiam R. Howlett1-2/+7
This is a test suite that uses the radix test infrastructure. It has been split into its own commit to allow for easier review of the maple tree code. The testing includes: - Allocation of nodes - gfp flag allocation checks - Expansion & contraction of tree - preallocation checks - tree navigation by next/prev - tree navigation by iterators (mas_for_each, etc) - Number of nodes for a given number of entries - Generic tree construction tests - Addition and removal of entries in forward and reverse numerical indexes - gap searching both forward and reverse - Combining gaps by overwriting entries in different ways - splitting right-most node - splitting left-most node - overwriting multiple slots - overwriting across different levels of the tree - overwriting the middle of a tree - causing a 3-way split up to the root by overwriting the last slot and first slot of different nodes and spanning different levels - RCU stress testing of the tree with threads - Duplication of the tree by entry count - Tests which were generated by fuzzers have been added. - A large number of tests which come from recording crashing in a VM and reconstructing the tree (see check_erase2_set()) Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add lockdep_is_held to headerLiam R. Howlett1-0/+2
maple tree uses lockdep_is_held, so define it as external in the header. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add support for slab bulk APIsLiam R. Howlett1-2/+116
Add support for kmem_cache_free_bulk() and kmem_cache_alloc_bulk() to the radix tree test suite. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add allocation counts and size to kmem_cacheLiam R. Howlett1-1/+27
Add functions to get the number of allocations, and total allocations from a kmem_cache. Also add a function to get the allocated size and a way to zero the total allocations. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add kmem_cache_set_non_kernel()Liam R. Howlett1-2/+14
kmem_cache_set_non_kernel() is a mechanism to allow a certain number of kmem_cache_alloc requests to succeed even when GFP_KERNEL is not set in the flags. This functionality allows for testing different paths though the code. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26radix tree test suite: add pr_err defineLiam R. Howlett1-0/+1
define pr_err to printk Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: David Howells <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26Maple Tree: add new data structureLiam R. Howlett5-0/+74
Patch series "Introducing the Maple Tree" The maple tree is an RCU-safe range based B-tree designed to use modern processor cache efficiently. There are a number of places in the kernel that a non-overlapping range-based tree would be beneficial, especially one with a simple interface. If you use an rbtree with other data structures to improve performance or an interval tree to track non-overlapping ranges, then this is for you. The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf nodes. With the increased branching factor, it is significantly shorter than the rbtree so it has fewer cache misses. The removal of the linked list between subsequent entries also reduces the cache misses and the need to pull in the previous and next VMA during many tree alterations. The first user that is covered in this patch set is the vm_area_struct, where three data structures are replaced by the maple tree: the augmented rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The long term goal is to reduce or remove the mmap_lock contention. The plan is to get to the point where we use the maple tree in RCU mode. Readers will not block for writers. A single write operation will be allowed at a time. A reader re-walks if stale data is encountered. VMAs would be RCU enabled and this mode would be entered once multiple tasks are using the mm_struct. Davidlor said : Yes I like the maple tree, and at this stage I don't think we can ask for : more from this series wrt the MM - albeit there seems to still be some : folks reporting breakage. Fundamentally I see Liam's work to (re)move : complexity out of the MM (not to say that the actual maple tree is not : complex) by consolidating the three complimentary data structures very : much worth it considering performance does not take a hit. This was very : much a turn off with the range locking approach, which worst case scenario : incurred in prohibitive overhead. Also as Liam and Matthew have : mentioned, RCU opens up a lot of nice performance opportunities, and in : addition academia[1] has shown outstanding scalability of address spaces : with the foundation of replacing the locked rbtree with RCU aware trees. A similar work has been discovered in the academic press https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf Sheer coincidence. We designed our tree with the intention of solving the hardest problem first. Upon settling on a b-tree variant and a rough outline, we researched ranged based b-trees and RCU b-trees and did find that article. So it was nice to find reassurances that we were on the right path, but our design choice of using ranges made that paper unusable for us. This patch (of 70): The maple tree is an RCU-safe range based B-tree designed to use modern processor cache efficiently. There are a number of places in the kernel that a non-overlapping range-based tree would be beneficial, especially one with a simple interface. If you use an rbtree with other data structures to improve performance or an interval tree to track non-overlapping ranges, then this is for you. The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf nodes. With the increased branching factor, it is significantly shorter than the rbtree so it has fewer cache misses. The removal of the linked list between subsequent entries also reduces the cache misses and the need to pull in the previous and next VMA during many tree alterations. The first user that is covered in this patch set is the vm_area_struct, where three data structures are replaced by the maple tree: the augmented rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The long term goal is to reduce or remove the mmap_lock contention. The plan is to get to the point where we use the maple tree in RCU mode. Readers will not block for writers. A single write operation will be allowed at a time. A reader re-walks if stale data is encountered. VMAs would be RCU enabled and this mode would be entered once multiple tasks are using the mm_struct. There is additional BUG_ON() calls added within the tree, most of which are in debug code. These will be replaced with a WARN_ON() call in the future. There is also additional BUG_ON() calls within the code which will also be reduced in number at a later date. These exist to catch things such as out-of-range accesses which would crash anyways. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Liam R. Howlett <[email protected]> Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Tested-by: David Howells <[email protected]> Tested-by: Sven Schnelle <[email protected]> Tested-by: Yu Zhao <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: SeongJae Park <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-09-26selftests: net: tsn_lib: run phc2sys in automatic modeVladimir Oltean2-6/+3
We can make the phc2sys helper not only synchronize a PHC to CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME to a PHC, which is going to be needed in distributed TSN tests. Instead of making the complexity of the arguments passed to phc2sys_start() explode, we can let it figure out the sync direction automatically, based on ptp4l's port states. Towards that goal, pass just the path to the desired ptp4l instance's UNIX domain socket, and remove the $if_name argument (from which it derives the PHC). Also adapt the one caller from the ocelot psfp.sh test. In the case of psfp.sh, phc2sys_start is able to properly figure out that CLOCK_REALTIME is the source clock and swp1's PHC is the destination, because of the way in which ptp4l_start for the UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always win the BMCA and always become the sync master between itself and $h1. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-26selftests: net: tsn_lib: allow multiple isochron receiversVladimir Oltean1-5/+11
Move the PID variable for the isochron receiver into a separate namespace per stats port, to allow multiple receivers (and/or orchestration daemons) to be instantiated by the same script. Preserve the existing behavior by making isochron_do() use the default stats TCP port of 5000. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-26selftests: net: tsn_lib: allow running ptp4l on multiple interfacesVladimir Oltean1-8/+19
Switch ports will want to act as Boundary Clocks, which are configured using ptp4l by specifying the "-i" argument multiple times. Since we track a log file and a pid file for each ptp4l instance, and we want to be compatible with the existing single-port callers of ptp4l_start and ptp4l_stop, pass the interface list as a single string of space-separated values. Based on this, we create a label for each ptp4l instance, where the spaces are replaced with underscores (ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1"). Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-26selftests: net: tsn_lib: don't overwrite isochron receiver extra args with UDSVladimir Oltean1-1/+1
The extra_args argument ($3) of isochron_recv_start is overwritten with uds ($2), if that argument exists. This is currently not a problem, because the only TSN selftest (ocelot/psfp.sh) omits remote sync so it does not specify to the receiver a UNIX domain socket for ptp4l. So $uds is currently an empty string. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-26selftests/ftrace: Add eprobe syntax error testcaseMasami Hiramatsu (Google)1-0/+27
Add a syntax error test case for eprobe as same as kprobes. Link: https://lkml.kernel.org/r/165932115471.2850673.8014722990775242727.stgit@devnote2 Cc: Tzvetomir Stoyanov <[email protected]> Cc: Ingo Molnar <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-09-26KVM: selftests: Add an x86-only test to verify nested exception queueingSean Christopherson3-0/+297
Add a test to verify that KVM_{G,S}ET_EVENTS play nice with pending vs. injected exceptions when an exception is being queued for L2, and that KVM correctly handles L1's exception intercept wants. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-26KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codesSean Christopherson2-54/+4
Include the vmx.h and svm.h uapi headers that KVM so kindly provides instead of manually defining all the same exit reasons/code. Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-26KVM: selftests: Switch to updated eVMCSv1 definitionVitaly Kuznetsov1-3/+42
Update Enlightened VMCS definition in selftests from KVM. Reviewed-by: Maxim Levitsky <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-26KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fieldsVitaly Kuznetsov1-0/+2
The updated Enlightened VMCS definition has 'encls_exiting_bitmap' field which needs mapping to VMCS, add the missing encoding. Reviewed-by: Maxim Levitsky <[email protected]> Reviewed-by: Kai Huang <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-26KVM: selftests: Require DISABLE_NX_HUGE_PAGES cap for NX hugepage testOliver Upton1-18/+6
Require KVM_CAP_VM_DISABLE_NX_HUGE_PAGES for the entire NX hugepage test instead of skipping the "disable" subtest if the capability isn't supported by the host kernel. While the "enable" subtest does provide value when the capability isn't supported, silently providing only half the promised coveraged is undesirable, i.e. it's better to skip the test so that the user knows something. Alternatively, the test could print something to alert the user instead of silently skipping the subtest, but that would encourage other tests to follow suit, and it's not clear that it's desirable to take selftests in that direction. And if selftests do head down the path of skipping subtests, such behavior needs first-class support in the framework. Opportunistically convert other test preconditions to TEST_REQUIRE(). Signed-off-by: Oliver Upton <[email protected]> Reviewed-by: David Matlack <[email protected]> Link: https://lore.kernel.org/r/[email protected] [sean: rewrote changelog to capture discussion about skipping the test] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-09-26selftests/bpf: Add wait send memory test for sockmap redirectLiu Jian1-0/+42
Add one test for wait redirect sock's send memory test for sockmap. Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-25Merge tag 'dax-and-nvdimm-fixes-v6.0-final' of ↵Linus Torvalds1-77/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull NVDIMM and DAX fixes from Dan Williams: "A recently discovered one-line fix for devdax that further addresses a v5.5 regression, and (a bit embarrassing) a small batch of fixes that have been sitting in my fixes tree for weeks. The older fixes have soaked in linux-next during that time and address an fsdax infinite loop and some other minor fixups. - Fix a infinite loop bug in fsdax - Fix memory-type detection for devdax (EINJ regression) - Small cleanups" * tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: devdax: Fix soft-reservation memory description fsdax: Fix infinite loop in dax_iomap_rw() nvdimm/namespace: drop nested variable in create_namespace_pmem() ndtest: Cleanup all of blk namespace specific code pmem: fix a name collision
2022-09-24Merge branch 'for-6.0/dax' into libnvdimm-fixesDan Williams437-7360/+26223
Pick up another "Soft Reservation" fix for v6.0-final on top of some straggling nvdimm fixes that missed v5.19.
2022-09-23selftests/bpf: allow to adjust BPF verifier log level in veristatAndrii Nakryiko1-1/+13
Add -l (--log-level) flag to override default BPF verifier log lever. This only matters in verbose mode, which is the mode in which veristat emits verifier log for each processed BPF program. This is important because for successfully verified BPF programs log_level 1 is empty, as BPF verifier truncates all the successfully verified paths. So -l2 is the only way to actually get BPF verifier log in practice. It looks sometihng like this: [vmuser@archvm bpf]$ sudo ./veristat xdp_tx.bpf.o -vl2 Processing 'xdp_tx.bpf.o'... PROCESSING xdp_tx.bpf.o/xdp_tx, DURATION US: 19, VERDICT: success, VERIFIER LOG: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 ; return XDP_TX; 0: (b4) w0 = 3 ; R0_w=3 1: (95) exit verification time 19 usec stack depth 0 processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 File Program Verdict Duration (us) Total insns Total states Peak states ------------ ------- ------- ------------- ----------- ------------ ----------- xdp_tx.bpf.o xdp_tx success 19 2 0 0 ------------ ------- ------- ------------- ----------- ------------ ----------- Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-23selftests/bpf: emit processing progress and add quiet mode to veristatAndrii Nakryiko1-1/+14
Emit "Processing <filepath>..." for each BPF object file to be processed, to show progress. But also add -q (--quiet) flag to silence such messages. Doing something more clever (like overwriting same output line) is to cumbersome and easily breakable if there is any other console output (e.g., errors from libbpf). Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-23selftests/bpf: make veristat skip non-BPF and failing-to-open BPF objectsAndrii Nakryiko1-8/+70
Make veristat ignore non-BPF object files. This allows simpler mass-verification (e.g., `sudo ./veristat *.bpf.o` in selftests/bpf directory). Note that `sudo ./veristat *.o` would also work, but with selftests's multiple copies of BPF object files (.bpf.o and .bpf.linked{1,2,3}.o) it's 4x slower. Also, given some of BPF object files could be incomplete in the sense that they are meant to be statically linked into final BPF object file (like linked_maps, linked_funcs, linked_vars), note such instances in stderr, but proceed anyways. This seems like a better trade off between completely silently ignoring BPF object file and aborting mass-verification altogether. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-23selftests/bpf: make veristat's verifier log parsing faster and more robustAndrii Nakryiko1-9/+20
Make sure veristat doesn't spend ridiculous amount of time parsing verifier stats from verifier log, especially for very large logs or truncated logs (e.g., when verifier returns -ENOSPC due to too small buffer). For this, parse lines from the end of the log and make sure we parse only up to 100 last lines, where stats should be, if at all. Suggested-by: Alexei Starovoitov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-23selftests/bpf: add sign-file to .gitignoreAndrii Nakryiko1-0/+1
Add sign-file to .gitignore to avoid accidentally checking it in. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-09-23selftests/bpf: Simplify cgroup_hierarchical_stats selftestYosry Ahmed2-220/+131
The cgroup_hierarchical_stats selftest is complicated. It has to be, because it tests an entire workflow of recording, aggregating, and dumping cgroup stats. However, some of the complexity is unnecessary. The test now enables the memory controller in a cgroup hierarchy, invokes reclaim, measure reclaim time, THEN uses that reclaim time to test the stats collection and aggregation. We don't need to use such a complicated stat, as the context in which the stat is collected is orthogonal. Simplify the test by using a simple stat instead of reclaim time, the total number of times a process has ever entered a cgroup. This makes the test simpler and removes the dependency on the memory controller and the memory reclaim interface. Signed-off-by: Yosry Ahmed <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-09-23selftest/net: adjust io_uring sendzc notif handlingPavel Begunkov1-9/+13
It's not currently possible but in the future we may get IORING_CQE_F_MORE and so a notification even for a failed request, i.e. when cqe->res <= 0. That's precisely what the documentation says, so adjust the test and do IORING_CQE_F_MORE checks regardless of the main completion cqe->res. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/aac948ea753a8bfe1fa3b82fe45debcb54586369.1663953085.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-23Merge branch 'for-6.0-fixes' into for-6.1Tejun Heo18-283/+582
for-6.0 has the following fix for cgroup_get_from_id(). 836ac87d ("cgroup: fix cgroup_get_from_id") which conflicts with the following two commits in for-6.1. 4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id") fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value") While the resolution is straightforward, the code ends up pretty ugly afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be fixed up there. Signed-off-by: Tejun Heo <[email protected]>
2022-09-23Merge tag 'landlock-6.0-rc7' of ↵Linus Torvalds2-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock fix from Mickaël Salaün: "Fix out-of-tree builds for Landlock tests" * tag 'landlock-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Fix out-of-tree builds
2022-09-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+1
Pull kvm fixes from Paolo Bonzini: "As everyone back came back from conferences, here are the pending patches for Linux 6.0. ARM: - Fix for kmemleak with pKVM s390: - Fixes for VFIO with zPCI - smatch fix x86: - Ensure XSAVE-capable hosts always allow FP and SSE state to be saved and restored via KVM_{GET,SET}_XSAVE - Fix broken max_mmu_rmap_size stat - Fix compile error with old glibc that doesn't have gettid()" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0 KVM: x86/mmu: add missing update to max_mmu_rmap_size selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c KVM: s390: pci: register pci hooks without interpretation KVM: s390: pci: fix GAIT physical vs virtual pointers usage KVM: s390: Pass initialized arg even if unused KVM: s390: pci: fix plain integer as NULL pointer warnings KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
2022-09-23selftests/livepatch: add sysfs testSong Liu3-1/+122
Add a test for livepatch sysfs entries. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.