aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-03-11selftests/bpf: Add a test for maximum packet size in xdp_do_redirectToke Høiland-Jørgensen1-0/+24
This adds an extra test to the xdp_do_redirect selftest for XDP live packet mode, which verifies that the maximum permissible packet size is accepted without any errors, and that a too big packet is correctly rejected. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10selftests/bpf: Check that bpf_kernel_read_file() denies reading IMA policyRoberto Sassu2-0/+35
Check that bpf_kernel_read_file() denies the reading of an IMA policy, by ensuring that ima_setup.sh exits with an error. Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10selftests/bpf: Add test for bpf_lsm_kernel_read_file()Roberto Sassu3-1/+49
Test the ability of bpf_lsm_kernel_read_file() to call the sleepable functions bpf_ima_inode_hash() or bpf_ima_file_hash() to obtain a measurement of a loaded IMA policy. Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10selftests/bpf: Check if the digest is refreshed after a file writeRoberto Sassu3-4/+103
Verify that bpf_ima_inode_hash() returns a non-fresh digest after a file write, and that bpf_ima_file_hash() returns a fresh digest. Verification is done by requesting the digest from the bprm_creds_for_exec hook, called before ima_bprm_check(). Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10selftests/bpf: Add test for bpf_ima_file_hash()Roberto Sassu2-6/+47
Add new test to ensure that bpf_ima_file_hash() returns the digest of the executed files. Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10selftests/bpf: Move sample generation code to ima_test_common()Roberto Sassu1-3/+8
Move sample generator code to ima_test_common() so that the new function can be called by multiple LSM hooks. Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-12/+39
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/[email protected]/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10Merge tag 'net-5.17-rc8' of ↵Linus Torvalds1-4/+17
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, and ipsec. Current release - regressions: - Bluetooth: fix unbalanced unlock in set_device_flags() - Bluetooth: fix not processing all entries on cmd_sync_work, make connect with qualcomm and intel adapters reliable - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0" - xdp: xdp_mem_allocator can be NULL in trace_mem_connect() - eth: ice: fix race condition and deadlock during interface enslave Current release - new code bugs: - tipc: fix incorrect order of state message data sanity check Previous releases - regressions: - esp: fix possible buffer overflow in ESP transformation - dsa: unlock the rtnl_mutex when dsa_master_setup() fails - phy: meson-gxl: fix interrupt handling in forced mode - smsc95xx: ignore -ENODEV errors when device is unplugged Previous releases - always broken: - xfrm: fix tunnel mode fragmentation behavior - esp: fix inter address family tunneling on GSO - tipc: fix null-deref due to race when enabling bearer - sctp: fix kernel-infoleak for SCTP sockets - eth: macb: fix lost RX packet wakeup race in NAPI receive - eth: intel stop disabling VFs due to PF error responses - eth: bcmgenet: don't claim WOL when its not available" * tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) xdp: xdp_mem_allocator can be NULL in trace_mem_connect(). ice: Fix race condition during interface enslave net: phy: meson-gxl: improve link-up behavior net: bcmgenet: Don't claim WOL when its not available net: arc_emac: Fix use after free in arc_mdio_probe() sctp: fix kernel-infoleak for SCTP sockets net: phy: correct spelling error of media in documentation net: phy: DP83822: clear MISR2 register to disable interrupts gianfar: ethtool: Fix refcount leak in gfar_get_ts_info selftests: pmtu.sh: Kill nettest processes launched in subshell. selftests: pmtu.sh: Kill tcpdump processes launched by subshell. NFC: port100: fix use-after-free in port100_send_complete net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ax25: Fix NULL pointer dereference in ax25_kill_by_device net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr net: ethernet: lpc_eth: Handle error for clk_enable ...
2022-03-10bpf: selftests: Update tests after s/delivery_time/tstamp/ change in bpf.hMartin KaFai Lau1-19/+19
The previous patch made the follow changes: - s/delivery_time_type/tstamp_type/ - s/bpf_skb_set_delivery_time/bpf_skb_set_tstamp/ - BPF_SKB_DELIVERY_TIME_* to BPF_SKB_TSTAMP_* This patch is to change the test_tc_dtime.c to reflect the above. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-10selftests: mptcp: join: make it shellcheck compliantMatthieu Baerts1-60/+66
This fixes a few issues reported by ShellCheck: - SC2068: Double quote array expansions to avoid re-splitting elements. - SC2206: Quote to prevent word splitting/globbing, or split robustly with mapfile or read -a. - SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. - SC2155: Declare and assign separately to avoid masking return values. - SC2162: read without -r will mangle backslashes. - SC2219: Instead of 'let expr', prefer (( expr )) . - SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?. - SC2236: Use -n instead of ! -z. - SC2004: $/${} is unnecessary on arithmetic variables. - SC2012: Use find instead of ls to better handle non-alphanumeric filenames. - SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..' instead. SC2086 (Double quotes to prevent globbing and word splitting) is ignored because it is controlled for the moment and there are too many to change. While at it, also fixed the alignment in one comment. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: avoid backquotesMatthieu Baerts1-32/+34
As explained on ShellCheck's wiki [1], it is recommended to avoid backquotes `...` in favour of parenthesis $(...): > Backtick command substitution `...` is legacy syntax with several > issues. > > - It has a series of undefined behaviors related to quoting in POSIX. > - It imposes a custom escaping mode with surprising results. > - It's exceptionally hard to nest. > > $(...) command substitution has none of these problems, and is > therefore strongly encouraged. [1] https://www.shellcheck.net/wiki/SC2006 Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: clarify local/global varsMatthieu Baerts1-52/+83
Some vars are redefined in different places. Best to avoid this classical Bash pitfall where variables are accidentally overridden by other functions because the proper scope has not been defined. Most issues are with loops: typically 'i' is used in for-loops but if it is not global, calling a function from a for-loop also doing a for-loop with the same non local 'i' variable causes troubles because the first 'i' will be assigned to another value. To prevent such issues, the iterator variable is now declared as local just before the loop. If it is always done like this, issues are avoided. To distinct between local and non local variables, all non local ones are defined at the beginning of the script. The others are now defined with the "local" keyword. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: helper to filter TCPMatthieu Baerts1-3/+12
This is more readable and reduces duplicated commands. This might also be useful to add v6 support and switch to nftables. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: list failure at the endMatthieu Baerts1-30/+55
With ~100 tests, it helps to have this summary at the end not to scroll to find which one has failed. It is especially interseting when looking at the output produced by the CI where the kernel logs from the serial are mixed together. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: alt. to exec specific testsMatthieu Baerts1-214/+232
Running a specific test by giving the ID is often what we want: the CI reports an issue with the Nth test, it is reproducible with: ./mptcp_join.sh N But this might not work when there is a need to find which commit has introduced a regression making a test unstable: failing from time to time. Indeed, a specific test is not attached to one ID: the ID is in fact a counter. It means the same test can have a different ID if other tests have been added/removed before this unstable one. Remembering the current test can also help listing failed tests at the end. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: option to execute specific testsMatthieu Baerts1-752/+877
Often, it is needed to run one specific test. There are options to run subgroups of tests but when only one fails, no need to run all the subgroup. So far, the solution was to edit the script to comment the tests that are not needed but that's not ideal. Now, it is possible to run one specific test by giving the ID of the tests that are going to be validated, e.g. ./mptcp_join.sh 36 37 This is cleaner and saves time. Technically, the reset* functions now return 0 if the test can be executed. This naturally creates sections per test in the code which is also helpful to understand what a test is exactly doing. Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: reset failing linksMatthieu Baerts1-2/+6
Best to always reset this env var before each test to avoid surprising behaviour depending on the order tests are running. Also clearly set it for the last failing links test is also needed when only this test is executed. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: join: define tests groups onceMatthieu Baerts1-94/+47
When adding a new tests group, it has to be defined in multiple places: - in the all_tests() function - in the 'usage()' function - in the getopts: short option + what to do when the option is used Because it is easy to forget one of them, it is useful to have to define them only once. Note: only using an associative array would simplify the code but the entries are stored in a hashtable and iterating over the different items doesn't give the same order as the one used in the declaration of this array. Because we want to run these tests in the same order as before, a "simple" array is used first. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10selftests: mptcp: drop msg argument of chk_csum_nrGeliang Tang1-14/+12
This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr with other chk_*_nr functions. Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10memblock tests: Add TODO and README filesKarolina Drobnik2-0/+135
Add description of the project, its structure and how to run it. List what is left to implement and what the known issues are. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/d5e39b9f7dcef177ebc14282727447bc21e3b38f.1646055639.git.karolinadrobnik@gmail.com
2022-03-10dma-mapping: benchmark: extract a common header file for map_benchmark ↵Tian Tao1-24/+1
definition kernel/dma/map_benchmark.c and selftests/dma/dma_map_benchmark.c have duplicate map_benchmark definitions, which tends to lead to inconsistent changes to map_benchmark on both sides, extract a common header file to avoid this problem. Signed-off-by: Tian Tao <[email protected]> Acked-by: Barry Song <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-03-09selftests: pmtu.sh: Kill nettest processes launched in subshell.Guillaume Nault1-2/+12
When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-09selftests: pmtu.sh: Kill tcpdump processes launched by subshell.Guillaume Nault1-2/+5
The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-09selftests/bpf: Add selftest for XDP_REDIRECT in BPF_PROG_RUNToke Høiland-Jørgensen2-0/+277
This adds a selftest for the XDP_REDIRECT facility in BPF_PROG_RUN, that redirects packets into a veth and counts them using an XDP program on the other side of the veth pair and a TC program on the local side of the veth. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-09selftests/bpf: Move open_netns() and close_netns() into network_helpers.cToke Høiland-Jørgensen3-89/+95
These will also be used by the xdp_do_redirect test being added in the next commit. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-09memblock tests: Add memblock_alloc_try_nid tests for bottom upKarolina Drobnik1-4/+499
Add checks for memblock_alloc_try_nid for bottom up allocation direction. As the definition of this function is pretty close to the core memblock_alloc_range_nid, the test cases implemented here cover most of the code paths related to the memory allocations. The tested scenarios are: - Region can be allocated within the requested range (both with aligned and misaligned boundaries) - Region can be allocated between two already existing entries - Not enough space between already reserved regions - Memory at the range boundaries is reserved but there is enough space to allocate a new region - The memory range is too narrow but memory can be allocated before the maximum address - Edge cases: + Minimum address is below memblock_start_of_DRAM() + Maximum address is above memblock_end_of_DRAM() Add test case wrappers to test both directions in the same context. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/1c0ba11b8da5dc8f71ad45175c536fa4be720984.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Add memblock_alloc_try_nid tests for top downKarolina Drobnik4-2/+692
Add tests for memblock_alloc_try_nid for top down allocation direction. As the definition of this function is pretty close to the core memblock_alloc_range_nid, the test cases implemented here cover most of the code paths related to the memory allocations. The tested scenarios are: - Region can be allocated within the requested range (both with aligned and misaligned boundaries) - Region can be allocated between two already existing entries - Not enough space between already reserved regions - Memory range is too narrow but memory can be allocated before the maximum address - Edge cases: + Minimum address is below memblock_start_of_DRAM() + Maximum address is above memblock_end_of_DRAM() Add checks for both allocation directions: - Region starts at the min_addr and ends at max_addr - Maximum address is too close to the beginning of the available memory - Memory at the range boundaries is reserved but there is enough space to allocate a new region Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/d6c282e0f9f62c15bf74c216214604764232d637.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Add memblock_alloc_from tests for bottom upKarolina Drobnik1-4/+171
Add checks for memblock_alloc_from for bottom up allocation direction. The tested scenarios are: - Not enough space to allocate memory at the minimal address - Minimal address parameter is smaller than the start address of the available memory - Minimal address parameter is too close to the end of the available memory Add test case wrappers to test both directions in the same context. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/506cf5293c8a21c012b7ea87b14af07754d3e656.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Add memblock_alloc_from tests for top downKarolina Drobnik4-1/+239
Add checks for memblock_alloc_from for default allocation direction. The tested scenarios are: - Not enough space to allocate memory at the minimal address - Minimal address parameter is smaller than the start address of the available memory - Minimal address is too close to the available memory Add simple memblock_alloc_from test that can be used to test both allocation directions (minimal address is aligned or misaligned). Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/3dd645f437975fd393010b95b8faa85d2b86490a.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Add memblock_alloc tests for bottom upKarolina Drobnik1-4/+320
Add checks for memblock_alloc for bottom up allocation direction. The tested scenarios are: - Region can be allocated on the first fit (with and without region merging) - Region can be allocated on the second fit (with and without region merging) Add test case wrappers to test both directions in the same context. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/426674eee20d99dca49caf1ee0142a83dccbc98d.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Add memblock_alloc tests for top downKarolina Drobnik4-1/+447
Add checks for memblock_alloc for top down allocation direction. The tested scenarios are: - Region can be allocated on the first fit (with and without region merging) - Region can be allocated on the second fit (with and without region merging) Add checks for both allocation directions: - Region can be allocated between two already existing entries - Limited memory available - All memory is reserved - No available memory registered with memblock Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/26ccf409b8ff0394559d38d792b2afb24b55887c.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Add simulation of physical memoryKarolina Drobnik4-2/+37
Allocation functions that return virtual addresses (with an exception of _raw variant) clear the allocated memory after reserving it. This requires valid memory ranges in memblock.memory. Introduce memory_block variable to store memory that can be registered with memblock data structure. Move assert.h and size.h includes to common.h to share them between the test files. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/dce115503c74a6936c44694b00014658a1bb6522.1646055639.git.karolinadrobnik@gmail.com
2022-03-09memblock tests: Split up reset_memblock functionKarolina Drobnik3-32/+33
All memblock data structure fields are reset in one function. In some test cases, it's preferred to reset memory region arrays without modifying other values like allocation direction flag. Extract two functions from reset_memblock, so it's possible to reset different parts of memblock: - reset_memblock_regions - reset region arrays and their counters - reset_memblock_attributes - set other fields to their default values Update checks in basic_api.c to use new definitions. Remove reset_memblock call from memblock_initialization_check, so the true initial values are tested. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/5cc1ba9a0ade922dbf4ba450165b81a9ed17d4a9.1646055639.git.karolinadrobnik@gmail.com
2022-03-08selftests: mptcp: add implicit endpoint test casePaolo Abeni2-1/+126
Ensure implicit endpoint are created when expected and that the user-space can update them Reviewed-by: Matthieu Baerts <[email protected]> Co-developed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08mptcp: introduce implicit endpointsPaolo Abeni1-2/+2
In some edge scenarios, an MPTCP subflows can use a local address mapped by a "implicit" endpoint created by the in-kernel path manager. Such endpoints presence can be confusing, as it's creation is hard to track and will prevent the later endpoint creation from the user-space using the same address. Define a new endpoint flag to mark implicit endpoints and allow the user-space to replace implicit them with user-provided data at endpoint creation time. Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08mptcp: more careful RM_ADDR generationPaolo Abeni1-6/+36
The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR command, generates RM_ADDR events for each known local address. While that is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR generated when both ends flush the PM addresses. This change restricts the RM_ADDR generation to previously explicitly announced addresses, and adjust the expected results in a bunch of related self-tests. Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08selftests: mptcp: Rename wait functionMat Martineau1-2/+2
The "selftests: mptcp: improve 'fair usage on close' stability" commit changed that self test to check the TcpAttemptFails MIB instead of looking for TW sockets. The associated bash function wasn't renamed in that commit because of the merge conflicts it would cause, so this commit updates the function name as Paolo originally intended. Cc: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08selftests: mptcp: join: allow running -cCiMatthieu Baerts1-39/+28
Without this patch, no tests would be ran when launching: mptcp_join.sh -cCi In any order or a combination with 2 of these letters. The recommended way with getopt is first parse all options and then act. This allows to do some actions in priority, e.g. display the help menu and stop. But also some global variables changing the behaviour of this selftests -- like the ones behind -cCi options -- can be set before running the different tests. By doing that, we can also avoid long and unreadable regex. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08Improve stability of find_vma BPF testMykola Lysenko1-9/+19
Remove unneeded spleep and increase length of dummy CPU intensive computation to guarantee test process execution. Also, complete aforemention computation as soon as test success criteria is met Signed-off-by: Mykola Lysenko <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-08Improve send_signal BPF test stabilityMykola Lysenko2-8/+11
Substitute sleep with dummy CPU intensive computation. Finish aforemention computation as soon as signal was delivered to the test process. Make the BPF code to only execute when PID global variable is set Signed-off-by: Mykola Lysenko <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-08Improve perf related BPF tests (sample_freq issue)Mykola Lysenko4-5/+5
Linux kernel may automatically reduce kernel.perf_event_max_sample_rate value when running tests in parallel on slow systems. Linux kernel checks against this limit when opening perf event with freq=1 parameter set. The lower bound is 1000. This patch reduces sample_freq value to 1000 in all BPF tests that use sample_freq to ensure they always can open perf event. Signed-off-by: Mykola Lysenko <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-03-08KVM: selftests: Add test to populate a VM with the max possible guest memSean Christopherson3-0/+294
Add a selftest that enables populating a VM with the maximum amount of guest memory allowed by the underlying architecture. Abuse KVM's memslots by mapping a single host memory region into multiple memslots so that the selftest doesn't require a system with terabytes of RAM. Default to 512gb of guest memory, which isn't all that interesting, but should work on all MMUs and doesn't take an exorbitant amount of memory or time. E.g. testing with ~64tb of guest memory takes the better part of an hour, and requires 200gb of memory for KVM's page tables when using 4kb pages. To inflicit maximum abuse on KVM' MMU, default to 4kb pages (or whatever the not-hugepage size is) in the backing store (memfd). Use memfd for the host backing store to ensure that hugepages are guaranteed when requested, and to give the user explicit control of the size of hugepage being tested. By default, spin up as many vCPUs as there are available to the selftest, and distribute the work of dirtying each 4kb chunk of memory across all vCPUs. Dirtying guest memory forces KVM to populate its page tables, and also forces KVM to write back accessed/dirty information to struct page when the guest memory is freed. On x86, perform two passes with a MMU context reset between each pass to coerce KVM into dropping all references to the MMU root, e.g. to emulate a vCPU dropping the last reference. Perform both passes and all rendezvous on all architectures in the hope that arm64 and s390x can gain similar shenanigans in the future. Measure and report the duration of each operation, which is helpful not only to verify the test is working as intended, but also to easily evaluate the performance differences different page sizes. Provide command line options to limit the amount of guest memory, set the size of each slot (i.e. of the host memory region), set the number of vCPUs, and to enable usage of hugepages. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-08KVM: selftests: Define cpu_relax() helpers for s390 and x86Sean Christopherson2-0/+13
Add cpu_relax() for s390 and x86 for use in arch-agnostic tests. arm64 already defines its own version. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-08KVM: selftests: Split out helper to allocate guest mem via memfdSean Christopherson2-18/+25
Extract the code for allocating guest memory via memfd out of vm_userspace_mem_region_add() and into a new helper, kvm_memfd_alloc(). A future selftest to populate a guest with the maximum amount of guest memory will abuse KVM's memslots to alias guest memory regions to a single memfd-backed host region, i.e. needs to back a guest with memfd memory without a 1:1 association between a memslot and a memfd instance. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-08KVM: selftests: Move raw KVM_SET_USER_MEMORY_REGION helper to utilsSean Christopherson3-27/+36
Move set_memory_region_test's KVM_SET_USER_MEMORY_REGION helper to KVM's utils so that it can be used by other tests. Provide a raw version as well as an assert-success version to reduce the amount of boilerplate code need for basic usage. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-08selftests/bpf: Make test_lwt_ip_encap more stable and fasterFelix Maurer1-1/+9
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to time. The failure occured when an IPv4 ping through the IPv6 GRE encapsulation did not receive a reply within the timeout. The IPv4 ping and the IPv6 ping in the test used different timeouts (1 sec for IPv4 and 6 sec for IPv6), probably taking into account that IPv6 might need longer to successfully complete. However, when IPv4 pings (with the short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6 apply. The actual reason for the long delays with IPv6 was that the IPv6 neighbor discovery sometimes did not complete in time. This was caused by the outgoing interface only having a tentative link local address, i.e., not having completed DAD for that lladdr. The ND was successfully retried after 1 sec but that was too late for the ping timeout. The IPv6 addresses for the test were already added with nodad. However, for the lladdrs, DAD was still performed. We now disable DAD in the test netns completely and just assume that the two lladdrs on each veth pair do not collide. This removes all the delays for IPv6 traffic in the test. Without the delays, we can now also reduce the delay of the IPv6 ping to 1 sec. This makes the whole test complete faster because we don't need to wait for the excessive timeout for each IPv6 ping that is supposed to fail. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Felix Maurer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
2022-03-08Revert "netfilter: nat: force port remap to prevent shadowing well-known ports"Florian Westphal1-3/+2
This reverts commit 878aed8db324bec64f3c3f956e64d5ae7375a5de. This change breaks existing setups where conntrack is used with asymmetric paths. In these cases, the NAT transformation occurs on the syn-ack instead of the syn: 1. SYN x:12345 -> y -> 443 // sent by initiator, receiverd by responder 2. SYNACK y:443 -> x:12345 // First packet seen by conntrack, as sent by responder 3. tuple_force_port_remap() gets called, sees: 'tcp from 443 to port 12345 NAT' -> pick a new source port, inititor receives 4. SYNACK y:$RANDOM -> x:12345 // connection is never established While its possible to avoid the breakage with NOTRACK rules, a kernel update should not break working setups. An alternative to the revert is to augment conntrack to tag mid-stream connections plus more code in the nat core to skip NAT for such connections, however, this leads to more interaction/integration between conntrack and NAT. Therefore, revert, users will need to add explicit nat rules to avoid port shadowing. Link: https://lore.kernel.org/netfilter-devel/[email protected]/#R Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2051413 Signed-off-by: Florian Westphal <[email protected]>
2022-03-08selftests: tpm: add async space test with noneexisting handleTadeusz Struk1-0/+16
Add a test for /dev/tpmrm0 in async mode that checks if the code handles invalid handles correctly. Cc: Jarkko Sakkinen <[email protected]> Cc: Shuah Khan <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Tested-by: Jarkko Sakkinen<[email protected]> Signed-off-by: Tadeusz Struk <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2022-03-08selftests: tpm2: Determine available PCR bankStefan Berger2-8/+52
Determine an available PCR bank to be used by a test case by querying the capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks and the bitmasks that show which PCRs are enabled in each bank. Collect the data in a dictionary. From the dictionary determine the PCR bank that has the PCRs enabled that the test needs. This avoids test failures with TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is disabled. Signed-off-by: Stefan Berger <[email protected]> Tested-by: Jarkko Sakkinen <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2022-03-07bpf/docs: Update list of architectures supported.KP Singh1-1/+1
vmtest.sh also supports s390x now. Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.