Age | Commit message (Collapse) | Author | Files | Lines |
|
There is no h1 h2 actually. Remove it. Here is the test result after
conversion.
]# ./test_bridge_backup_port.sh
Backup port
-----------
TEST: Forwarding out of swp1 [ OK ]
TEST: No forwarding out of vx0 [ OK ]
TEST: swp1 carrier off [ OK ]
TEST: No forwarding out of swp1 [ OK ]
...
Backup nexthop ID - ping
------------------------
TEST: Ping with backup nexthop ID [ OK ]
TEST: Ping after disabling backup nexthop ID [ OK ]
Backup nexthop ID - torture test
--------------------------------
TEST: Torture test [ OK ]
Tests passed: 83
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/stmicro/stmmac/dwmac5.c
drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/hwif.h
37e4b8df27bc ("net: stmmac: fix FPE events losing")
c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
net/ipv4/tcp_ao.c
9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk")
7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
|
|
Add a regression test for var-off zero-sized reads.
Signed-off-by: Andrei Matei <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
|
|
Commit 05f1edac8009 ("selftests/mm: run all tests from run_vmtests.sh")
fixed the inconsistency caused by tests being defined as TEST_GEN_PROGS.
This issue was leading to tests not being executed via run_vmtests.sh and
furthermore some tests running twice due to the kselftests wrapper also
executing them.
Fix the definition of two tests (soft-dirty and pagemap_ioctl) that are
still incorrectly defined.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nico Pache <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Joel Savitz <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
__FILE__ is not guaranteed to exist in current dir. Replace that with
argv[0] for memory map test.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Peter Xu <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
To stay consistent with the naming pattern used for similar cases in BPF
UAPI (__MAX_BPF_ATTACH_TYPE, etc), rename MAX_BPF_LINK_TYPE into
__MAX_BPF_LINK_TYPE.
Also similar to MAX_BPF_ATTACH_TYPE and MAX_BPF_REG, add:
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
Not all __MAX_xxx enums have such #define, so I'm not sure if we should
add it or not, but I figured I'll start with a completely backwards
compatible way, and we can drop that, if necessary.
Also adjust a selftest that used MAX_BPF_LINK_TYPE enum.
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding test that tries to trigger the BUG_IN during early map update
in prog_array_map_poke_run function.
The idea is to share prog array map between thread that constantly
updates it and another one loading a program that uses that prog
array.
Eventually we will hit a place where the program is ok to be updated
(poke->tailcall_target_stable check) but the address is still not
registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL
and cause imbalance for the next tail call update check, which will
fail with -EBUSY in bpf_arch_text_poke as described in previous fix.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Ilya Leoshkevich <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a selftest that attempts to conceptually replicate intended BPF
token use cases inside user namespaced container.
Child process is forked. It is then put into its own userns and mountns.
Child creates BPF FS context object. This ensures child userns is
captured as the owning userns for this instance of BPF FS. Given setting
delegation mount options is privileged operation, we ensure that child
cannot set them.
This context is passed back to privileged parent process through Unix
socket, where parent sets up delegation options, creates, and mounts it
as a detached mount. This mount FD is passed back to the child to be
used for BPF token creation, which allows otherwise privileged BPF
operations to succeed inside userns.
We validate that all of token-enabled privileged commands (BPF_BTF_LOAD,
BPF_MAP_CREATE, and BPF_PROG_LOAD) work as intended. They should only
succeed inside the userns if a) BPF token is provided with proper
allowed sets of commands and types; and b) namespaces CAP_BPF and other
privileges are set. Lacking a) or b) should lead to -EPERM failures.
Based on suggested workflow by Christian Brauner ([0]).
[0] https://lore.kernel.org/bpf/20230704-hochverdient-lehne-eeb9eeef785e@brauner/
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Enhance partial_stack_load_preserves_zeros subtest with detailed
precision propagation log checks. We know expect fp-16 to be spilled,
initially imprecise, zero const register, which is later marked as
precise even when partial stack slot load is performed, even if it's not
a register fill (!).
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Validate that 1-, 2-, and 4-byte loads from stack slots not aligned on
8-byte boundary still preserve zero, when loading from all-STACK_ZERO
sub-slots, or when stack sub-slots are covered by spilled register with
known constant zero value.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add tests validating that STACK_ZERO slots are preserved when slot is
partially overwritten with subregister spill.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a new selftests that validates precision tracking for stack access
instruction, using both r10-based and non-r10-based accesses. For
non-r10 ones we also make sure to have non-zero var_off to validate that
final stack offset is tracked properly in instruction history
information inside verifier.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/
Acked-by: Eduard Zingerman <[email protected]>
Reported-by: Tao Lyu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
xdp_metadata test is flaky sometimes:
verify_xsk_metadata:FAIL:rx_hash_type unexpected rx_hash_type: actual 8 != expected 0
Where 8 means XDP_RSS_TYPE_L4_ANY and is exported from veth driver only when
'skb->l4_hash' condition is met. This makes me think that the program is
triggering again for some other packet.
Let's have a filter, similar to xdp_hw_metadata, where we trigger XDP kfuncs
only for UDP packets destined to port 8080.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
There was some confusion amongst Meta sched_ext folks regarding whether
stashing bpf_rb_root - the tree itself, rather than a single node - was
supported. This patch adds a small test which demonstrates this
functionality: a local kptr with rb_root is created, a node is created
and added to the tree, then the tree is kptr_xchg'd into a mapval.
Signed-off-by: Dave Marchevsky <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./sctp_vrf.sh
Testing For SCTP VRF:
TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS]
...
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS]
***v6 Tests Done***
Acked-by: David Ahern <[email protected]>
Reviewed-by: Xin Long <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
namespace
Here is the test result after conversion.
]# ./ndisc_unsolicited_na_test.sh
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=1 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=1 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=1 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=1 [ OK ]
Tests passed: 8
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./l2tp.sh
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel [ OK ]
TEST: IPv6 route through L2TP tunnel [ OK ]
TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ]
Tests passed: 16
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Reviewed-by: James Chapman <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./ioam6.sh
--------------------------------------------------------------------------
OUTPUT tests
--------------------------------------------------------------------------
TEST: Unknown IOAM namespace (inline mode) [ OK ]
TEST: Unknown IOAM namespace (encap mode) [ OK ]
TEST: Missing trace room (inline mode) [ OK ]
TEST: Missing trace room (encap mode) [ OK ]
TEST: Trace type with bit 0 only (inline mode) [ OK ]
...
TEST: Full supported trace (encap mode) [ OK ]
--------------------------------------------------------------------------
GLOBAL tests
--------------------------------------------------------------------------
TEST: Forward - Full supported trace (inline mode) [ OK ]
TEST: Forward - Full supported trace (encap mode) [ OK ]
- Tests passed: 88
- Tests failed: 0
Acked-by: David Ahern <[email protected]>
Reviewed-by: Justin Iurman <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./icmp.sh
OK
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
# ./icmp_redirect.sh
###########################################################################
Legacy routing
###########################################################################
TEST: IPv4: redirect exception [ OK ]
...
TEST: IPv4: mtu exception plus redirect [ OK ]
TEST: IPv6: mtu exception plus redirect [ OK ]
Tests passed: 40
Tests failed: 0
Tests xfailed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./traceroute.sh
TEST: IPV6 traceroute [ OK ]
TEST: IPV4 traceroute [ OK ]
Tests passed: 2
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./drop_monitor_tests.sh
Software drops test
TEST: Capturing active software drops [ OK ]
TEST: Capturing inactive software drops [ OK ]
Hardware drops test
TEST: Capturing active hardware drops [ OK ]
TEST: Capturing inactive hardware drops [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Here is the test result after conversion.
]# ./cmsg_ipv6.sh
OK
]# ./cmsg_so_mark.sh
OK
]# ./cmsg_time.sh
OK
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
namespace
Here is the test result after conversion.
2 tests also failed without this patch
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=1 [ OK ]
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
namespace
Here is the test result after conversion.
]# ./arp_ndisc_evict_nocarrier.sh
run arp_evict_nocarrier=1 test
ok
run arp_evict_nocarrier=0 test
ok
run all.arp_evict_nocarrier=0 test
ok
run ndisc_evict_nocarrier=1 test
ok
run ndisc_evict_nocarrier=0 test
ok
run all.ndisc_evict_nocarrier=0 test
ok
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Syscall program is running with rcu_read_lock_trace being held, so if
bpf_map_update_elem() or bpf_map_delete_elem() invokes
synchronize_rcu_tasks_trace() when operating on an outer map, there will
be dead-lock, so add a test to guarantee that it is dead-lock free.
Signed-off-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add test cases to test the race between the destroy of inner map due to
map-in-map update and the access of inner map in bpf program. The
following 4 combinations are added:
(1) array map in map array + bpf program
(2) array map in map array + sleepable bpf program
(3) array map in map htab + bpf program
(4) array map in map htab + sleepable bpf program
Before applying the fixes, when running `./test_prog -a map_in_map`, the
following error was reported:
==================================================================
BUG: KASAN: slab-use-after-free in array_map_update_elem+0x48/0x3e0
Read of size 4 at addr ffff888114f33824 by task test_progs/1858
CPU: 1 PID: 1858 Comm: test_progs Tainted: G O 6.6.0+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x90
print_report+0xd2/0x620
kasan_report+0xd1/0x110
__asan_load4+0x81/0xa0
array_map_update_elem+0x48/0x3e0
bpf_prog_be94a9f26772f5b7_access_map_in_array+0xe6/0xf6
trace_call_bpf+0x1aa/0x580
kprobe_perf_func+0xdd/0x430
kprobe_dispatcher+0xa0/0xb0
kprobe_ftrace_handler+0x18b/0x2e0
0xffffffffc02280f7
RIP: 0010:__x64_sys_getpgid+0x1/0x30
......
</TASK>
Allocated by task 1857:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_alloc_info+0x1e/0x30
__kasan_kmalloc+0x98/0xa0
__kmalloc_node+0x6a/0x150
__bpf_map_area_alloc+0x141/0x170
bpf_map_area_alloc+0x10/0x20
array_map_alloc+0x11f/0x310
map_create+0x28a/0xb40
__sys_bpf+0x753/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 11:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x113/0x190
slab_free_freelist_hook+0xd7/0x1e0
__kmem_cache_free+0x170/0x260
kfree+0x9b/0x160
kvfree+0x2d/0x40
bpf_map_area_free+0xe/0x20
array_map_free+0x120/0x2c0
bpf_map_free_deferred+0xd7/0x1e0
process_one_work+0x462/0x990
worker_thread+0x370/0x670
kthread+0x1b0/0x200
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
Last potentially related work creation:
kasan_save_stack+0x26/0x50
__kasan_record_aux_stack+0x94/0xb0
kasan_record_aux_stack_noalloc+0xb/0x20
__queue_work+0x331/0x950
queue_work_on+0x75/0x80
bpf_map_put+0xfa/0x160
bpf_map_fd_put_ptr+0xe/0x20
bpf_fd_array_map_update_elem+0x174/0x1b0
bpf_map_update_value+0x2b7/0x4a0
__sys_bpf+0x2551/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Signed-off-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") missed the
conversion for cxl_test. Add usage of cxl_num_decoders_committed() to
replace the open coding.
Suggested-by: Alison Schofield <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Reviewed-by: Fan Ni <[email protected]>
Link: https://lore.kernel.org/r/169929160525.824083.11813222229025394254.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- A small fix for the dirty tracking self test to fail correctly if the
code is buggy
- Fix a tricky syzkaller race UAF with object reference counting
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not UAF during iommufd_put_object()
iommufd: Add iommufd_ctx to iommufd_put_object()
iommufd/selftest: Fix _test_mock_dirty_bitmaps()
|
|
There is a spelling mistake in an ASSERT_GT message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We need 6.7-rc4 in here as we need to revert one of the debugfs changes
that came in that release through the wireless tree.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Emit tnum representation as just a constant if all bits are known.
Use decimal-vs-hex logic to determine exact format of emitted
constant value, just like it's done for register range values.
For that move tnum_strn() to kernel/bpf/log.c to reuse decimal-vs-hex
determination logic and constants.
Acked-by: Shung-Hsi Yu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add one more subtest to global_func15 selftest to validate that
verifier properly marks r0 as precise and avoids erroneous state pruning
of the branch that has return value outside of expected [0, 1] value.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adjust timer/timer_ret_1 test to validate more carefully verifier logic
of enforcing async callback return value. This test will pass only if
return result is marked precise and read.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Similarly to subprog/callback logic, enforce return value of BPF program
using more precise smin/smax range.
We need to adjust a bunch of tests due to a changed format of an error
message.
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Shung-Hsi Yu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
BPF verifier expects callback subprogs to return values from specified
range (typically [0, 1]). This requires that r0 at exit is both precise
(because we rely on specific value range) and is marked as read
(otherwise state comparison will ignore such register as unimportant).
Add a simple test that validates that all these conditions are enforced.
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Shung-Hsi Yu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
bpf_throw() is checking R1, so let's report R1 in the log.
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Shung-Hsi Yu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This selftests shows a proof of concept method to use BPF LSM to enforce
file signature. This test is added to verify_pkcs7_sig, so that some
existing logic can be reused.
This file signature method uses fsverity, which provides reliable and
efficient hash (known as digest) of the file. The file digest is signed
with asymmetic key, and the signature is stored in xattr. At the run time,
BPF LSM reads file digest and the signature, and then checks them against
the public key.
Note that this solution does NOT require FS_VERITY_BUILTIN_SIGNATURES.
fsverity is only used to provide file digest. The signature verification
and access control is all implemented in BPF LSM.
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add selftests for two new filesystem kfuncs:
1. bpf_get_file_xattr
2. bpf_get_fsverity_digest
These tests simply make sure the two kfuncs work. Another selftest will be
added to demonstrate how to use these kfuncs to verify file signature.
CONFIG_FS_VERITY is added to selftests config. However, this is not
sufficient to guarantee bpf_get_fsverity_digest works. This is because
fsverity need to be enabled at file system level (for example, with tune2fs
on ext4). If local file system doesn't have this feature enabled, just skip
the test.
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Move CONFIG_VSOCKETS up, so the CONFIGs are in alphabetic order.
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
xdp_synproxy_kern.c is a BPF program that generates SYN cookies on
allowed TCP ports and sends SYNACKs to clients, accelerating synproxy
iptables module.
Fix the bitmask operation when checking the status of an existing
conntrack entry within tcp_lookup() function. Do not AND with the bit
position number, but with the bitmask value to check whether the entry
found has the IPS_CONFIRMED flag set.
Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Jeroen van Ingen Schenau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Minh Le Hoang <[email protected]>
Link: https://lore.kernel.org/xdp-newbies/CAAi1gX7owA+Tcxq-titC-h-KPM7Ri-6ZhTNMhrnPq5gmYYwKow@mail.gmail.com/T/#u
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Remove this generic file and move the tests to their appropriate files
Signed-off-by: Pedro Tammela <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|