| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: Peng Zhang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The maple tree node is overloaded to keep status as well as the active
node. This, unfortunately, results in a re-walk on underflow or overflow.
Since the maple state has room, the status can be placed in its own enum
in the structure. Once an underflow/overflow is detected, certain modes
can restore the status to active and others may need to re-walk just that
one node to see the entry.
The status being an enum has the benefit of detecting unhandled status in
switch statements.
[[email protected]: fix comments about MAS_*]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: update forking to separate maple state and node]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: fix mas_prev() state separation code]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: Peng Zhang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: Peng Zhang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
__mas_set_range() was created to shortcut resetting the maple state and a
debug check was added to the caller (the vma iterator) to ensure the
internal maple state remains safe to use. Move the debug check from the
vma iterator into the maple tree itself so other users do not incorrectly
use the advanced maple state modification.
Fallout from this change include a large amount of debug setup needed to
be moved to earlier in the header, and the maple_tree.h radix-tree test
code needed to move the inclusion of the header to after the atomic
define. None of those changes have functional changes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: Peng Zhang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
`fs_kfuncs.c`'s `test_xattr` would fail the test even when the
filesystem did not support xattr, for instance when /tmp is mounted as
tmpfs.
This change checks errno when setxattr fail. If the failure is due to
the operation being unsupported, we will skip the test (just like we
would if verity was not enabled on the FS.
Before the change, fs_kfuncs test would fail in test_axattr:
$ vmtest -k $(make -s image_name) './tools/testing/selftests/bpf/test_progs -a fs_kfuncs'
=> bzImage
===> Booting
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=128 to
nr_cpu_
===> Setting up VM
===> Running command
[ 4.157491] bpf_testmod: loading out-of-tree module taints kernel.
[ 4.161515] bpf_testmod: module verification failed: signature and/or
required key missing - tainting kernel
test_xattr:PASS:create_file 0 nsec
test_xattr:FAIL:setxattr unexpected error: -1 (errno 95)
#90/1 fs_kfuncs/xattr:FAIL
#90/2 fs_kfuncs/fsverity:SKIP
#90 fs_kfuncs:FAIL
All error logs:
test_xattr:PASS:create_file 0 nsec
test_xattr:FAIL:setxattr unexpected error: -1 (errno 95)
#90/1 fs_kfuncs/xattr:FAIL
#90 fs_kfuncs:FAIL
Summary: 0/0 PASSED, 1 SKIPPED, 1 FAILED
Test plan:
$ touch tmpfs_file && truncate -s 1G tmpfs_file && mkfs.ext4 tmpfs_file
# /tmp mounted as tmpfs
$ vmtest -k $(make -s image_name) './tools/testing/selftests/bpf/test_progs -a fs_kfuncs'
=> bzImage
===> Booting
===> Setting up VM
===> Running command
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
Can't find bpf_testmod.ko kernel module: -2
#90/1 fs_kfuncs/xattr:SKIP
#90/2 fs_kfuncs/fsverity:SKIP
#90 fs_kfuncs:SKIP
Summary: 1/0 PASSED, 2 SKIPPED, 0 FAILED
# /tmp mounted as ext4 with xattr enabled but not verity
$ vmtest -k $(make -s image_name) 'mount -o loop tmpfs_file /tmp && \
/tools/testing/selftests/bpf/test_progs -a fs_kfuncs'
=> bzImage
===> Booting
===> Setting up VM
===> Running command
[ 4.067071] loop0: detected capacity change from 0 to 2097152
[ 4.191882] EXT4-fs (loop0): mounted filesystem
407ffa36-4553-4c8c-8c78-134443630f69 r/w with ordered data mode. Quota
mode: none.
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
Can't find bpf_testmod.ko kernel module: -2
#90/1 fs_kfuncs/xattr:OK
#90/2 fs_kfuncs/fsverity:SKIP
#90 fs_kfuncs:OK (SKIP: 1/2)
Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED
$ tune2fs -O verity tmpfs_file
# /tmp as ext4 with both xattr and verity enabled
$ vmtest -k $(make -s image_name) 'mount -o loop tmpfs_file /tmp && \
./tools/testing/selftests/bpf/test_progs -a fs_kfuncs'
=> bzImage
===> Booting
===> Setting up VM
===> Running command
[ 4.291434] loop0: detected capacity change from 0 to 2097152
[ 4.460828] EXT4-fs (loop0): recovery complete
[ 4.468631] EXT4-fs (loop0): mounted filesystem
7b4a7b7f-c442-4b06-9ede-254e63cceb52 r/w with ordered data mode. Quota
mode: none.
[ 4.988074] fs-verity: sha256 using implementation "sha256-generic"
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
Can't find bpf_testmod.ko kernel module: -2
#90/1 fs_kfuncs/xattr:OK
#90/2 fs_kfuncs/fsverity:OK
#90 fs_kfuncs:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Fixes: 341f06fdddf7 ("selftests/bpf: Add tests for filesystem kfuncs")
Signed-off-by: Manu Bretelle <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Building the KVM selftests from the main selftests Makefile (as opposed
to the kvm subdirectory) doesn't work as OUTPUT is set, forcing the
generated header to spill into the selftests directory. Additionally,
relative paths do not work when building outside of the srctree, as the
canonical selftests path is replaced with 'kselftest' in the output.
Work around both of these issues by explicitly overriding OUTPUT on the
submake cmdline. Move the whole fragment below the point lib.mk gets
included such that $(abs_objdir) is available.
Reviewed-by: Cornelia Huck <[email protected]>
Tested-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Now that ARMV8_PMU_PMCR_N is made with GENMASK, update usages to treat
it as a pre-shifted mask.
Signed-off-by: James Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add selftest that establishes dead code-eliminated valid global subprog
(global_dead) and makes sure that it's not possible to freplace it, as
it's effectively not there. This test will fail with unexpected success
before 2afae08c9dcb ("bpf: Validate global subprogs lazily").
v2->v3:
- add missing err assignment (Alan);
- undo unnecessary signature changes in verifier_global_subprogs.c (Eduard);
v1->v2:
- don't rely on assembly output in verifier log, which changes between
compiler versions (CI).
Acked-by: Eduard Zingerman <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
qemu-user does has its own implementation of coredumping.
That implementation does not respect the call to
prctl(PR_SET_DUMPABLE, 0) in run_protection().
This leads to a coredump for every test run under qemu-user.
Use also setrlimit() to inhibit coredump creation which is respected by
qemu-user.
Link: https://lore.kernel.org/qemu-devel/[email protected]/
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Willy Tarreau <[email protected]>
|
|
The implementation uses the prlimit64 systemcall as that is available on
all architectures.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Willy Tarreau <[email protected]>
|
|
The same testcase is present on the line above.
Fixes: b4844fa0bdb4 ("selftests/nolibc: implement a few tests for various syscalls")
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
Move the check of the existing length into the function so it can't be
forgotten by the caller.
Also hardcode the padding character as only spaces are ever used.
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
MIPS requires some extra instructions to set up the $gp register for the
with a pointer to the global data area.
This isn't needed for non-PIC builds, but this patch enables the code
unconditionally to prevent bitrot.
Also enable PIC in one of the test configurations for ongoing
validation.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
qemu-user is faster than a full system test.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
While ppc64le shares the same executable with regular ppc64 the user
variant needs has a dedicated executable.
Introduce a new QEMU_ARCH_USER Makefile variable to accommodate that.
Fixes: 17362f3d0bd3 ("selftests/nolibc: use qemu-system-ppc64 for ppc64le")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
Center-align all possible status reports.
Before OK and FAIL were center-aligned in relation to each other but
SKIPPED and FAILED would be left-aligned.
Before:
7 environ_addr = <0x7fffef3e7c50> [OK]
8 environ_envp = <0x7fffef3e7c58> [FAIL]
9 environ_auxv [SKIPPED]
10 environ_total [SKIPPED]
11 environ_HOME = <0x7fffef3e99bd> [OK]
12 auxv_addr [SKIPPED]
13 auxv_AT_UID = 1000 [OK]
After:
7 environ_addr = <0x7ffff13b00a0> [OK]
8 environ_envp = <0x7ffff13b00a8> [FAIL]
9 environ_auxv [SKIPPED]
10 environ_total [SKIPPED]
11 environ_HOME = <0x7ffff13b19bd> [OK]
12 auxv_addr [SKIPPED]
13 auxv_AT_UID = 1000 [OK]
Signed-off-by: Thomas Weißschuh <[email protected]>
|
|
Allow testing MIPS O32 big endian.
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
|
|
Allow some postprocessing of defconfig files.
Suggested-by: Zhangjin Wu <[email protected]>
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
|
|
More ABIs exist, for better clarity specify it explicitly everywhere.
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
|
|
MIPS has many different configurations prepare the support of additional
ones by moving the build of MIPS to the generic XARCH infrastructure.
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
|
|
The script can run the testsuite for multiple architectures and provides
an overall test report.
Furthermore it can automatically download crosstools from
mirrors.kernel.org if requested by the user.
Example execution:
$ ./run-tests.sh
i386: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
x86_64: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
arm64: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
arm: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
mips: 162 test(s): 161 passed, 1 skipped, 0 failed => status: warning
ppc: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
ppc64: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
ppc64le: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
riscv: 162 test(s): 162 passed, 0 skipped, 0 failed => status: success
s390: 162 test(s): 161 passed, 1 skipped, 0 failed => status: warning
loongarch: 162 test(s): 161 passed, 1 skipped, 0 failed => status: warning
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Out of tree builds are much more convenient when building for multiple
architectures or configurations in parallel.
Only absolute O= parameters are supported as Makefile.include will
always resolve relative paths in relation to $(srctree) instead of the
current directory.
Add a call to "make outputmakefile" to verify that the sourcetree is
clean.
This is based on Zhangjins out-of-tree patch.
It extends that work for get_init_cpio support and also drops relative
O= specifications explicitly.
Link: https://lore.kernel.org/lkml/06d96bd81fe812a9718098a383678ad3beba98b1.1691215074.git.falcon@tinylab.org/
Co-developed-by: Zhangjin Wu <[email protected]>
Signed-off-by: Zhangjin Wu <[email protected]>
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It is easier to recognize paths from their well-known location in the
source tree than having to resolve the relative path in ones head.
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
qemu for LoongArch does not work properly with direct kernel boot.
The kernel will panic during initialization and hang without any output.
When booting in EFI mode everything work correctly.
While users most likely don't have the LoongArch EFI binary installed at
least an explicit error about 'file not found' is better than a hanging
test without output that can never succeed.
Link: https://lore.kernel.org/loongarch/[email protected]/
Signed-off-by: Thomas Weißschuh <[email protected]>
Acked-by: Willy Tarreau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Changed check expects passed data meta to be deemed invalid. After loosening
the requirement, the size of 36 bytes becomes valid. Therefore, increase
tested meta size to 256, so we do not get an unexpected success.
Signed-off-by: Larysa Zaremba <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
On failure we log the actual and expected value of the register we detect
a mismatch in. For SME one obvious potential source of corruption would be
if we had corrupted SVCR since changes in streaming mode will reset the
register values, log the value to aid in understanding issues.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
When TPIDR2 is not supported the tpidr2 ABI test prints the same message
for each skipped test:
ok 1 skipped, TPIDR2 not supported
which isn't ideal for test automation software since it tracks kselftest
results based on the string used to describe the test. This is also not
standard KTAP output, the expected format is:
ok 1 # SKIP default_value
Updated the program to generate this, using the same set of test names that
we would run if the test actually executed.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20231124-kselftest-arm64-tpidr2-skip-v1-1-e05d0ccef101@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
Right now, tests read page flags from /proc/pid/pagemap files. With this
change, tests will check that PAGEMAP_SCAN return correct information too.
[[email protected]: fix spelling mistake "succedded" -> "succeeded"]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrei Vagin <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Tested-by: Muhammad Usama Anjum <[email protected]>
Cc: Michał Mirosław <[email protected]>
[[email protected]: allow running tests on old kernels]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrew Morton <[email protected]>
|
|
Skip other tests when BENCH is enabled so that performance can be measured
in user space.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peng Zhang <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add test for mtree_dup().
Test by duplicating different maple trees and then comparing the two
trees. Includes tests for duplicating full trees and memory allocation
failures on different nodes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peng Zhang <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When kmem_cache_alloc_bulk() fails to allocate, leave the freed pointers
in the array. This enables a more accurate simulation of the kernel's
behavior and allows for testing potential double-free scenarios.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peng Zhang <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"Generic:
- Set .owner for various KVM file_operations so that files refcount
the KVM module until KVM is done executing _all_ code, including
the last few instructions of kvm_put_kvm(). And then revert the
misguided attempt to rely on "struct kvm" refcounts to pin
KVM-the-module.
ARM:
- Do not redo the mapping of vLPIs, if they have already been mapped
s390:
- Do not leave bits behind in PTEs
- Properly catch page invalidations that affect the prefix of a
nested guest
x86:
- When checking if a _running_ vCPU is "in-kernel", i.e. running at
CPL0, get the CPL directly instead of relying on
preempted_in_kernel (which is valid if and only if the vCPU was
preempted, i.e. NOT running).
- Fix a benign "return void" that was recently introduced.
Selftests:
- Makefile tweak for dependency generation
- '-Wformat' fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
KVM: selftests: add -MP to CFLAGS
KVM: selftests: Actually print out magic token in NX hugepages skip message
KVM: x86: Remove 'return void' expression for 'void function'
Revert "KVM: Prevent module exit until all VMs are freed"
KVM: Set file_operations.owner appropriately for all such structures
KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
KVM: s390/mm: Properly reset no-dat
KVM: s390: vsie: fix wrong VIR 37 when MSO is used
|
|
The new bpf_cpumask_weight() kfunc can be used to count the number of
bits that are set in a struct cpumask* kptr. Let's add a selftest to
verify its behavior.
Signed-off-by: David Vernet <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add two tests validating that verifier's precision backtracking logic
handles BPF_ST_MEM instructions that produce fake register spill into
register slot. This is happening when non-zero constant is written
directly to a slot, e.g., *(u64 *)(r10 -8) = 123.
Add both full 64-bit register spill, as well as 32-bit "sub-spill".
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small fixes for 6.7-rc5 for a variety of small driver
subsystems. Included in here are:
- debugfs revert for reported issue
- greybus revert for reported issue
- greybus fixup for endian build warning
- coresight driver fixes
- nvmem driver fixes
- devcoredump fix
- parport new device id
- ndtest build fix
All of these have ben in linux-next with no reported issues"
* tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Do not expect fixed layouts to grab a layout driver
parport: Add support for Brainboxes IX/UC/PX parallel cards
Revert "greybus: gb-beagleplay: Ensure le for values in transport"
greybus: gb-beagleplay: Ensure le for values in transport
greybus: BeaglePlay driver needs CRC_CCITT
Revert "debugfs: annotate debugfs handlers vs. removal with lockdep"
devcoredump: Send uevent once devcd is ready
ndtest: fix typo class_regster -> class_register
misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write
misc: mei: client.c: return negative error code in mei_cl_write
mei: pxp: fix mei_pxp_send_message return value
coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base
coresight: ultrasoc-smb: Config SMB buffer before register sink
coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb
Documentation: coresight: fix `make refcheckdocs` warning
hwtracing: hisi_ptt: Don't try to attach a task
hwtracing: hisi_ptt: Handle the interrupt in hardirq context
hwtracing: hisi_ptt: Add dummy callback pmu::read()
coresight: Fix crash when Perf and sysfs modes are used concurrently
coresight: etm4x: Remove bogous __exit annotation for some functions
|
|
Expanding the test coverage from cgroup2 to include cgroup1. The result
as follows,
Already existing test cases for cgroup2:
#48/1 cgrp_local_storage/tp_btf:OK
#48/2 cgrp_local_storage/attach_cgroup:OK
#48/3 cgrp_local_storage/recursion:OK
#48/4 cgrp_local_storage/negative:OK
#48/5 cgrp_local_storage/cgroup_iter_sleepable:OK
#48/6 cgrp_local_storage/yes_rcu_lock:OK
#48/7 cgrp_local_storage/no_rcu_lock:OK
Expanded test cases for cgroup1:
#48/8 cgrp_local_storage/cgrp1_tp_btf:OK
#48/9 cgrp_local_storage/cgrp1_recursion:OK
#48/10 cgrp_local_storage/cgrp1_negative:OK
#48/11 cgrp_local_storage/cgrp1_iter_sleepable:OK
#48/12 cgrp_local_storage/cgrp1_yes_rcu_lock:OK
#48/13 cgrp_local_storage/cgrp1_no_rcu_lock:OK
Summary:
#48 cgrp_local_storage:OK
Summary: 1/13 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
This new helper allows us to obtain the fd of a net_cls cgroup, which will
be utilized in the subsequent patch.
Signed-off-by: Yafang Shao <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Because test_bad_ret main program is not written in assembly, we don't
control instruction indices in timer_cb_ret_bad() subprog. This bites us
in timer/test_bad_ret subtest, where we see difference between cpuv4 and
other flavors.
For now, make __msg() expectations not rely on instruction indices by
anchoring them around bpf_get_prandom_u32 call. Once we have regex/glob
support for __msg(), this can be expressed a bit more nicely, but for
now just mitigating the problem with available means.
Fixes: e02dea158dda ("selftests/bpf: validate async callback return value check correctness")
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Privileged programs are supposed to be able to read uninitialized stack
memory (ever since 6715df8d5) but, before this patch, these accesses
were permitted inconsistently. In particular, accesses were permitted
above state->allocated_stack, but not below it. In other words, if the
stack was already "large enough", the access was permitted, but
otherwise the access was rejected instead of being allowed to "grow the
stack". This undesired rejection was happening in two places:
- in check_stack_slot_within_bounds()
- in check_stack_range_initialized()
This patch arranges for these accesses to be permitted. A bunch of tests
that were relying on the old rejection had to change; all of them were
changed to add also run unprivileged, in which case the old behavior
persists. One tests couldn't be updated - global_func16 - because it
can't run unprivileged for other reasons.
This patch also fixes the tracking of the stack size for variable-offset
reads. This second fix is bundled in the same commit as the first one
because they're inter-related. Before this patch, writes to the stack
using registers containing a variable offset (as opposed to registers
with fixed, known values) were not properly contributing to the
function's needed stack size. As a result, it was possible for a program
to verify, but then to attempt to read out-of-bounds data at runtime
because a too small stack had been allocated for it.
Each function tracks the size of the stack it needs in
bpf_subprog_info.stack_depth, which is maintained by
update_stack_depth(). For regular memory accesses, check_mem_access()
was calling update_state_depth() but it was passing in only the fixed
part of the offset register, ignoring the variable offset. This was
incorrect; the minimum possible value of that register should be used
instead.
This tracking is now fixed by centralizing the tracking of stack size in
grow_stack_state(), and by lifting the calls to grow_stack_state() to
check_stack_access_within_bounds() as suggested by Andrii. The code is
now simpler and more convincingly tracks the correct maximum stack size.
check_stack_range_initialized() can now rely on enough stack having been
allocated for the access; this helps with the fix for the first issue.
A few tests were changed to also check the stack depth computation. The
one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
Fixes: 01f810ace9ed3 ("bpf: Allow variable-offset stack access")
Reported-by: Hao Sun <[email protected]>
Signed-off-by: Andrei Matei <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Closes: https://lore.kernel.org/bpf/CABWLsev9g8UP_c3a=1qbuZUi20tGoUXoU07FPf-5FLvhOKOY+Q@mail.gmail.com/
|
|
Using -MD without -MP causes build failures when a header file is deleted
or moved. With -MP, the compiler will emit phony targets for the header
files it lists as dependencies, and the Makefiles won't refuse to attempt
to rebuild a C unit which no longer includes the deleted header.
Signed-off-by: David Woodhouse <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Pass MAGIC_TOKEN to __TEST_REQUIRE() when printing the help message about
needing to pass a magic value to manually run the NX hugepages test,
otherwise the help message will contain garbage.
In file included from x86_64/nx_huge_pages_test.c:15:
x86_64/nx_huge_pages_test.c: In function ‘main’:
include/test_util.h:40:32: error: format ‘%d’ expects a matching ‘int’ argument [-Werror=format=]
40 | ksft_exit_skip("- " fmt "\n", ##__VA_ARGS__); \
| ^~~~
x86_64/nx_huge_pages_test.c:259:9: note: in expansion of macro ‘__TEST_REQUIRE’
259 | __TEST_REQUIRE(token == MAGIC_TOKEN,
| ^~~~~~~~~~~~~~
Signed-off-by: angquan yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: rewrite shortlog+changelog]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
|
|
Here is the test result after conversion.
]# ./vrf-xfrm-tests.sh
No qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
netem qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
Tests passed: 14
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here is the test result after conversion.
]# ./vrf_strict_mode_test.sh
################################################################################
TEST SECTION: VRF strict_mode test on init network namespace
################################################################################
TEST: init: net.vrf.strict_mode is available [ OK ]
TEST: init: strict_mode=0 by default, 0 vrfs [ OK ]
...
TEST: init: check strict_mode=1 [ OK ]
TEST: testns-HvoZkB: check strict_mode=0 [ OK ]
Tests passed: 37
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here is the test result after conversion.
]# ./vrf_route_leaking.sh
###########################################################################
IPv4 (sym route): VRF ICMP ttl error route lookup ping
###########################################################################
TEST: Basic IPv4 connectivity [ OK ]
TEST: Ping received ICMP ttl exceeded [ OK ]
...
TEST: Basic IPv6 connectivity [ OK ]
TEST: Traceroute6 reports a hop on r1 [ OK ]
Tests passed: 18
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here is the test result after conversion.
]# ./test_vxlan_vnifiltering.sh
TEST: Create traditional vxlan device [ OK ]
TEST: Cannot create vnifilter device without external flag [ OK ]
TEST: Creating external vxlan device with vnifilter flag [ OK ]
...
TEST: VM connectivity over traditional vxlan (ipv6 default rdst) [ OK ]
TEST: VM connectivity over metadata nonfiltering vxlan (ipv4 default rdst) [ OK ]
Tests passed: 27
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here is the test result after conversion.
]# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here is the test result after conversion.
]# ./test_vxlan_nolocalbypass.sh
TEST: localbypass enabled [ OK ]
TEST: Packet received by local VXLAN device - localbypass [ OK ]
TEST: localbypass disabled [ OK ]
TEST: Packet not received by local VXLAN device - nolocalbypass [ OK ]
TEST: localbypass enabled [ OK ]
TEST: Packet received by local VXLAN device - localbypass [ OK ]
Tests passed: 6
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Here is the test result after conversion.
]# ./test_vxlan_mdb.sh
Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay
--------------------------------------------------------------------
TEST: MDB entry addition [ OK ]
...
Data path: MDB torture test - IPv6 overlay / IPv6 underlay
----------------------------------------------------------
TEST: Torture test [ OK ]
Tests passed: 620
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
namespace
Here is the test result after conversion.
]# ./test_bridge_neigh_suppress.sh
Per-port ARP suppression - VLAN 10
----------------------------------
TEST: arping [ OK ]
TEST: ARP suppression [ OK ]
...
TEST: NS suppression (VLAN 20) [ OK ]
Tests passed: 148
Tests failed: 0
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|