aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2021-06-24KVM: selftests: Unconditionally allocate EPT tables in memslot 0Sean Christopherson4-22/+17
Drop the EPTP memslot param from all EPT helpers and shove the hardcoded '0' down to the vm_phy_page_alloc() calls. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot '0' for page table allocationsSean Christopherson16-35/+31
Drop the memslot param from virt_pg_map() and virt_map() and shove the hardcoded '0' down to the vm_phy_page_alloc() calls. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot 0 for vaddr allocationsSean Christopherson7-21/+18
Drop the memslot param(s) from vm_vaddr_alloc() now that all callers directly specific '0' as the memslot. Drop the memslot param from virt_pgd_alloc() as well since vm_vaddr_alloc() is its only user. I.e. shove the hardcoded '0' down to the vm_phy_pages_alloc() calls. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24lkdtm/heap: Add init_on_alloc testsKees Cook2-0/+3
Add SLAB and page allocator tests for init_on_alloc. Testing for init_on_free was already happening via the poisoning tests. Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Enable various testable CONFIGsKees Cook1-0/+6
Add a handful of LKDTM-testable features that depend on certain CONFIGs so that they are visible in logs for CI systems that run the selftests. Others could be added, but may be seen as having too high a trade-off for general testing. Cc: [email protected] Suggested-by: Guillaume Tucker <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24lkdtm: Add CONFIG hints in errors where possibleKees Cook1-0/+1
For various failure conditions, try to include some details about where to look for reasons about the failure. Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24lkdtm/heap: Add vmalloc linear overflow testKees Cook1-1/+2
Similar to the existing slab overflow and stack exhaustion tests, add VMALLOC_LINEAR_OVERFLOW (and rename the slab test SLAB_LINEAR_OVERFLOW). Additionally unmarks the test as destructive. (It should be safe in the face of misbehavior.) Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Fix expected text for free poisonKees Cook1-2/+2
Freed memory poisoning can be tested a few ways, so update the expected text to reflect the non-Oopsing alternative. Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Fix expected text for CR4 pinningKees Cook1-1/+1
The error text for CR4 pinning changed. Update the test to match. Fixes: a13b9d0b9721 ("x86/cpu: Use pinning mask for CR4 bits needing to be 0") Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24selftests/lkdtm: Avoid needing explicit sub-shellKees Cook1-4/+8
Some environments do not set $SHELL when running tests. There's no need to use $SHELL here anyway, since "cat" can be used to receive any delivered signals from the kernel. Additionally avoid using bash-isms in the command, and record stderr for posterity. Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets") Cc: [email protected] Suggested-by: Guillaume Tucker <[email protected]> Suggested-by: David Laight <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-24KVM: selftests: Use "standard" min virtual address for CPUID test allocSean Christopherson1-2/+1
Use KVM_UTIL_MIN_ADDR as the minimum for x86-64's CPUID array. The system page size was likely used as the minimum because _something_ had to be provided. Increasing the min from 0x1000 to 0x2000 should have no meaningful impact on the test, and will allow changing vm_vaddr_alloc() to use KVM_UTIL_MIN_VADDR as the default. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Use alloc page helper for xAPIC IPI testSean Christopherson1-1/+1
Use the common page allocation helper for the xAPIC IPI test, effectively raising the minimum virtual address from 0x1000 to 0x2000. Presumably the test won't explode if it can't get a page at address 0x1000... Cc: Peter Shier <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Use alloc_page helper for x86-64's GDT/IDT/TSS allocationsSean Christopherson1-6/+4
Switch to the vm_vaddr_alloc_page() helper for x86-64's "kernel" allocations now that the helper uses the same min virtual address as the open coded versions. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Lower the min virtual address for misc page allocationsSean Christopherson1-1/+1
Reduce the minimum virtual address of page allocations from 0x10000 to KVM_UTIL_MIN_VADDR (0x2000). Both values appear to be completely arbitrary, and reducing the min to KVM_UTIL_MIN_VADDR will allow for additional consolidation of code. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Add helpers to allocate N pages of virtual memorySean Christopherson6-24/+59
Add wrappers to allocate 1 and N pages of memory using de facto standard values as the defaults for minimum virtual address, data memslot, and page table memslot. Convert all compatible users. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Use "standard" min virtual address for Hyper-V pagesSean Christopherson1-1/+1
Use the de facto standard minimum virtual address for Hyper-V's hcall params page. It's the allocator's job to not double-allocate memory, i.e. there's no reason to force different regions for the params vs. hcall page. This will allow adding a page allocation helper with a "standard" minimum address. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot 0 for x86's GDT/TSS setupSean Christopherson1-10/+8
Refactor x86's GDT/TSS allocations to for memslot '0' at its vm_addr_alloc() call sites instead of passing in '0' from on high. This is a step toward using a common helper for allocating pages. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Unconditionally use memslot 0 when loading elf binarySean Christopherson6-10/+7
Use memslot '0' for all vm_vaddr_alloc() calls when loading the test binary. This is the first step toward adding a helper to handle page allocations with a default value for the target memslot. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Zero out the correct page in the Hyper-V features testSean Christopherson1-1/+1
Fix an apparent copy-paste goof in hyperv_features where hcall_page (which is two pages, so technically just the first page) gets zeroed twice, and hcall_params gets zeroed none times. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Remove errant asm/barrier.h include to fix arm64 buildSean Christopherson1-1/+0
Drop an unnecessary include of asm/barrier.h from dirty_log_test.c to allow the test to build on arm64. arm64, s390, and x86 all build cleanly without the include (PPC and MIPS aren't supported in KVM's selftests). arm64's barrier.h includes linux/kasan-checks.h, which is not copied into tools/. In file included from ../../../../tools/include/asm/barrier.h:8, from dirty_log_test.c:19: .../arm64/include/asm/barrier.h:12:10: fatal error: linux/kasan-checks.h: No such file or directory 12 | #include <linux/kasan-checks.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. Fixes: 84292e565951 ("KVM: selftests: Add dirty ring buffer test") Cc: Peter Xu <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: fix triple fault if ept=0 in dirty_log_testHou Wenlong4-8/+3
Commit 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on default VM") moved vcpu_set_cpuid into vm_create_with_vcpus, but dirty_log_test doesn't use it to create vm. So vcpu's CPUIDs is not set, the guest's pa_bits in kvm would be smaller than the value queried by userspace. However, the dirty track memory slot is in the highest GPA, the reserved bits in gpte would be set with wrong pa_bits. For shadow paging, page fault would fail in permission_fault and be injected into guest. Since guest doesn't have idt, it finally leads to vm_exit for triple fault. Move vcpu_set_cpuid into vm_vcpu_add_default to set supported CPUIDs on default vcpu, since almost all tests need it. Fixes: 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on default VM") Signed-off-by: Hou Wenlong <[email protected]> Message-Id: <411ea2173f89abce56fc1fca5af913ed9c5a89c9.1624351343.git.houwenlong93@linux.alibaba.com> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-24KVM: selftests: Fix mapping length truncation in m{,un}map()Zenghui Yu1-2/+2
max_mem_slots is now declared as uint32_t. The result of (0x200000 * 32767) is unexpectedly truncated to be 0xffe00000, whilst we actually need to allocate about, 63GB. Cast max_mem_slots to size_t in both mmap() and munmap() to fix the length truncation. We'll otherwise see the failure on arm64 thanks to the access_ok() checking in __kvm_set_memory_region(), as the unmapped VA happen to go beyond the task's allowed address space. # ./set_memory_region_test Allowed number of memory slots: 32767 Adding slots 0..32766, each memory region with 2048K size ==== Test Assertion Failure ==== set_memory_region_test.c:391: ret == 0 pid=94861 tid=94861 errno=22 - Invalid argument 1 0x00000000004015a7: test_add_max_memory_regions at set_memory_region_test.c:389 2 (inlined by) main at set_memory_region_test.c:426 3 0x0000ffffb8e67bdf: ?? ??:0 4 0x00000000004016db: _start at :? KVM_SET_USER_MEMORY_REGION IOCTL failed, rc: -1 errno: 22 slot: 2615 Fixes: 3bf0fcd75434 ("KVM: selftests: Speed up set_memory_region_test") Signed-off-by: Zenghui Yu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-06-23selftests/sgx: remove checks for file execute permissionsDave Hansen1-13/+3
The SGX selftests can fail for a bunch of non-obvious reasons like 'noexec' permissions on /dev (which is the default *EVERYWHERE* it seems). A new test mistakenly also looked for +x permission on the /dev/sgx_enclave. File execute permissions really only apply to the ability of execve() to work on a file, *NOT* on the ability for an application to map the file with PROT_EXEC. SGX needs to mmap(PROT_EXEC), but doesn't need to execve() the device file. Remove the check. Fixes: 4284f7acb78b ("selftests/sgx: Improve error detection and messages") Reported-by: Tim Gardner <[email protected]> Cc: Jarkko Sakkinen <[email protected]> Cc: Reinette Chatre <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Tested-by: Reinette Chatre <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23selftests/ftrace: fix event-no-pid on 1-core machineKrzysztof Kozlowski1-0/+7
When running event-no-pid test on small machines (e.g. cloud 1-core instance), other events might not happen: + cat trace + cnt=0 + [ 0 -eq 0 ] + fail No other events were recorded [15] event tracing - restricts events based on pid notrace filtering [FAIL] Schedule a simple sleep task to be sure that some other process events get recorded. Fixes: ebed9628f5c2 ("selftests/ftrace: Add test to test new set_event_notrace_pid file") Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23kunit: Remove the unused all_tests.configDavid Gow1-3/+0
This isn't used anywhere. While it's possible that people were manually referencing it, the new default config (in default.config in the same path) provides equivalent functionality. Signed-off-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23kunit: Move default config from arch/um -> tools/testing/kunitDavid Gow2-1/+4
The default .kunitconfig file is currently kept in arch/um/configs/kunit_defconfig, but -- with the impending QEMU patch -- will no-longer be exclusively used for UML-based kernels. Move it alongside the other KUnit configs in tools/testing/kunit/configs, and give it a name which matches the existing all_tests.config and broken_on_uml.config files. Also update the Getting Started documentation to point to the new file. Signed-off-by: David Gow <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-1/+6
Daniel Borkmann says: ==================== pull-request: bpf 2021-06-23 The following pull-request contains BPF updates for your *net* tree. We've added 14 non-merge commits during the last 6 day(s) which contain a total of 13 files changed, 137 insertions(+), 64 deletions(-). Note that when you merge net into net-next, there is a small merge conflict between 9f2470fbc4cb ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf with c49661aa6f70 ("skmsg: Remove unused parameters of sk_msg_wait_data()") from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data() and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take tcp_msg_wait_data() and remove err parameter from the function, iii) for net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data() implementation and its prototype in header. The main changes are: 1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend. 2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski. 3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang. 4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar. 5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson. 6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-23selftests: icmp_redirect: support expected failuresAndrea Righi1-1/+7
According to a comment in commit 99513cfa16c6 ("selftest: Fixes for icmp_redirect test") the test "IPv6: mtu exception plus redirect" is expected to fail, because of a bug in the IPv6 logic that hasn't been fixed yet apparently. We should probably consider this failure as an "expected failure", therefore change the script to return XFAIL for that particular test and also report the total amount of expected failures at the end of the run. Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-23Merge x86/urgent into x86/fpuBorislav Petkov49-501/+2860
Pick up dependent changes which either went mainline (x86/urgent is based on -rc7 and that contains them) as urgent fixes and the current x86/urgent branch which contains two more urgent fixes, so that the bigger FPU rework can base off ontop. Signed-off-by: Borislav Petkov <[email protected]>
2021-06-23Merge branch 'topic/ppc-kvm' of ↵Paolo Bonzini3-18/+27
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into HEAD - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes
2021-06-22selftests: mptcp: turn rp_filter off on each NICYonglong Li1-1/+2
To turn rp_filter off we should: echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter and echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter before NIC created. Co-developed-by: Paolo Abeni <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Yonglong Li <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22selftests: mptcp: add deny_join_id0 testcasesGeliang Tang1-1/+74
This patch added a new argument '-d' for mptcp_join.sh script, to invoke the testcases for the MP_CAPABLE 'C' flag. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22tc-testing: add test for ct DNAT tuple collisionMarcelo Ricardo Leitner1-0/+45
When this test fails, /proc/net/nf_conntrack gets only 1 entry: ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.10 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=5000 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 When it works, it gets 2 entries: ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.20 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=58203 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.10 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=5000 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 The missing entry is because the 2nd packet hits a tuple collusion and the conntrack entry doesn't get allocated. Signed-off-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22tc-testing: add support for sending various scapy packetsMarcelo Ricardo Leitner1-19/+23
It can be worth sending different scapy packets on a given test, as in the last patch of this series. For that, lets listify the scapy attribute and simply iterate over it. Signed-off-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22tc-testing: fix list handlingMarcelo Ricardo Leitner1-1/+1
python lists don't have an 'add' method, but 'append'. Fixes: 14e5175e9e04 ("tc-testing: introduce scapyPlugin for basic traffic") Signed-off-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22selftests: mptcp: display proper reason to abort testsMatthieu Baerts1-16/+36
Without this modification, we were often displaying this error messages: FAIL: Could not even run loopback test But $ret could have been set to a non 0 value in many different cases: - net.mptcp.enabled=0 is not working as expected - setsockopt(..., TCP_ULP, "mptcp", ...) is allowed - ping between each netns are failing - tests between ns1 as a receiver and ns>1 are failing - other tests not involving ns1 as a receiver are failing So not only for the loopback test. Now a clearer message, including the time it took to run all tests, is displayed. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-22selftests: futex: Add futex compare requeue testAndré Almeida4-1/+142
Add testing for futex_cmp_requeue(). The first test just requeues from one waiter to another one, and wakes it. The second performs both wake and requeue, and checks the return values to see if the operation woke/requeued the expected number of waiters. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-22selftests: futex: Add futex wait testAndré Almeida4-1/+177
There are three different strategies to uniquely identify a futex in the kernel: - Private futexes: uses the pointer to mm_struct and the page address - Shared futexes: checks if the page containing the address is a PageAnon: - If it is, uses the same data as a private futexes - If it isn't, uses an inode sequence number from struct inode and the page's index Create a selftest to check those three paths and basic wait/wake mechanism. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-22Merge branch kvm-arm64/selftest/sysreg-list-fix into kvmarm-master/nextMarc Zyngier4-123/+321
Selftest updates from Andrew Jones, fixing the sysgreg list expectations by dealing with multiple configurations, such as with or without a PMU. * kvm-arm64/selftest/sysreg-list-fix: KVM: arm64: Update MAINTAINERS to include selftests KVM: arm64: selftests: get-reg-list: Split base and pmu registers KVM: arm64: selftests: get-reg-list: Remove get-reg-list-sve KVM: arm64: selftests: get-reg-list: Provide config selection option KVM: arm64: selftests: get-reg-list: Prepare to run multiple configs at once KVM: arm64: selftests: get-reg-list: Introduce vcpu configs
2021-06-22KVM: arm64: selftests: get-reg-list: Split base and pmu registersAndrew Jones1-8/+31
Since KVM commit 11663111cd49 ("KVM: arm64: Hide PMU registers from userspace when not available") the get-reg-list* tests have been failing with ... ... There are 74 missing registers. The following lines are missing registers: ... where the 74 missing registers are all PMU registers. This isn't a bug in KVM that the selftest found, even though it's true that a KVM userspace that wasn't setting the KVM_ARM_VCPU_PMU_V3 VCPU flag, but still expecting the PMU registers to be in the reg-list, would suddenly no longer have their expectations met. In that case, the expectations were wrong, though, so that KVM userspace needs to be fixed, and so does this selftest. The fix for this selftest is to pull the PMU registers out of the base register sublist into their own sublist and then create new, pmu-enabled vcpu configs which can be tested. Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-22KVM: arm64: selftests: get-reg-list: Remove get-reg-list-sveAndrew Jones4-15/+21
Now that we can easily run the test for multiple vcpu configs, let's merge get-reg-list and get-reg-list-sve into just get-reg-list. We also add a final change to make it more possible to run multiple tests, which is to fork the test, rather than directly run it. That allows a test to fail, but subsequent tests can still run. Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-22KVM: arm64: selftests: get-reg-list: Provide config selection optionAndrew Jones1-3/+53
Add a new command line option that allows the user to select a specific configuration, e.g. --config=sve will give the sve config. Also provide help text and the --help/-h options. Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-22KVM: arm64: selftests: get-reg-list: Prepare to run multiple configs at onceAndrew Jones1-17/+51
We don't want to have to create a new binary for each vcpu config, so prepare to run the test for multiple vcpu configs in a single binary. We do this by factoring out the test from main() and then looping over configs. When given '--list' we still never print more than a single reg-list for a single vcpu config though, because it would be confusing otherwise. No functional change intended. Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-22KVM: arm64: selftests: get-reg-list: Introduce vcpu configsAndrew Jones1-90/+175
We already break register lists into sublists that get selected based on vcpu config. However, since we only had two configs (vregs and sve), we didn't structure the code very well to manage them. Restructure it now to more cleanly handle register sublists that are dependent on the vcpu config. This patch has no intended functional change (except for the vcpu config name now being prepended to all output). Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-06-21selftests: tls: fix chacha+bidir testsJakub Kicinski1-28/+39
ChaCha support did not adjust the bidirectional test. We need to set up KTLS in reverse direction correctly, otherwise these two cases will fail: tls.12_chacha.bidir tls.13_chacha.bidir Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Signed-off-by: Jakub Kicinski <[email protected]> Acked-by: Vadim Fedorenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-21selftests: tls: clean up uninitialized warningsJakub Kicinski1-0/+20
A bunch of tests uses uninitialized stack memory as random data to send. This is harmless but generates compiler warnings. Explicitly init the buffers with random data. Signed-off-by: Jakub Kicinski <[email protected]> Acked-by: Vadim Fedorenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-21selftests/bpf: Retry for EAGAIN in udp_redir_to_connected()Cong Wang1-1/+6
We use non-blocking sockets for testing sockmap redirections, and got some random EAGAIN errors from UDP tests. There is no guarantee the packet would be immediately available to receive as soon as it is sent out, even on the local host. For UDP, this is especially true because it does not lock the sock during BH (unlike the TCP path). This is probably why we only saw this error in UDP cases. No matter how hard we try to make the queue empty check accurate, it is always possible for recvmsg() to beat ->sk_data_ready(). Therefore, we should just retry in case of EAGAIN. Fixes: d6378af615275 ("selftests/bpf: Add a test case for udp sockmap") Reported-by: Jiang Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Acked-by: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski33-200/+1929
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <[email protected]>
2021-06-18Merge tag 'net-5.13-rc7' of ↵Linus Torvalds15-15/+386
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc7, including fixes from wireless, bpf, bluetooth, netfilter and can. Current release - regressions: - mlxsw: spectrum_qdisc: Pass handle, not band number to find_class() to fix modifying offloaded qdiscs - lantiq: net: fix duplicated skb in rx descriptor ring - rtnetlink: fix regression in bridge VLAN configuration, empty info is not an error, bot-generated "fix" was not needed - libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem creation Current release - new code bugs: - ethtool: fix NULL pointer dereference during module EEPROM dump via the new netlink API - mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue should not be visible to the stack - mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs - mlx5e: verify dev is present in get devlink port ndo, avoid a panic Previous releases - regressions: - neighbour: allow NUD_NOARP entries to be force GCed - further fixes for fallout from reorg of WiFi locking (staging: rtl8723bs, mac80211, cfg80211) - skbuff: fix incorrect msg_zerocopy copy notifications - mac80211: fix NULL ptr deref for injected rate info - Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs Previous releases - always broken: - bpf: more speculative execution fixes - netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local - udp: fix race between close() and udp_abort() resulting in a panic - fix out of bounds when parsing TCP options before packets are validated (in netfilter: synproxy, tc: sch_cake and mptcp) - mptcp: improve operation under memory pressure, add missing wake-ups - mptcp: fix double-lock/soft lookup in subflow_error_report() - bridge: fix races (null pointer deref and UAF) in vlan tunnel egress - ena: fix DMA mapping function issues in XDP - rds: fix memory leak in rds_recvmsg Misc: - vrf: allow larger MTUs - icmp: don't send out ICMP messages with a source address of 0.0.0.0 - cdc_ncm: switch to eth%d interface naming" * tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits) net: ethernet: fix potential use-after-free in ec_bhf_remove selftests/net: Add icmp.sh for testing ICMP dummy address responses icmp: don't send out ICMP messages with a source address of 0.0.0.0 net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY net: ll_temac: Fix TX BD buffer overwrite net: ll_temac: Add memory-barriers for TX BD access net: ll_temac: Make sure to free skb when it is completely used MAINTAINERS: add Guvenc as SMC maintainer bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path bnxt_en: Fix TQM fastpath ring backing store computation bnxt_en: Rediscover PHY capabilities after firmware reset cxgb4: fix wrong shift. mac80211: handle various extensible elements correctly mac80211: reset profile_periodicity/ema_ap cfg80211: avoid double free of PMSR request cfg80211: make certificate generation more robust mac80211: minstrel_ht: fix sample time check net: qed: Fix memcpy() overflow of qed_dcbx_params() net: cdc_eem: fix tx fixup skb leak net: hamradio: fix memory leak in mkiss_close ...
2021-06-18selftests/net: Add icmp.sh for testing ICMP dummy address responsesToke Høiland-Jørgensen1-0/+74
This adds a new icmp.sh selftest for testing that the kernel will respond correctly with an ICMP unreachable message with the dummy (192.0.0.8) source address when there are no IPv4 addresses configured to use as source addresses. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.