| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After all the soft validation of the region has completed, convey the
region configuration to hardware while being careful to commit decoders
in specification mandated order. In addition to programming the endpoint
decoder base-address, interleave ways and granularity, the switch
decoder target lists are also established.
While the kernel can enforce spec-mandated commit order, it can not
enforce spec-mandated reset order. For example, the kernel can't stop
someone from removing an endpoint device that is occupying decoderN in a
switch decoder where decoderN+1 is also committed. To reset decoderN,
decoderN+1 must be torn down first. That "tear down the world"
implementation is saved for a follow-on patch.
Callback operations are provided for the 'commit' and 'reset'
operations. While those callbacks may prove useful for CXL accelerators
(Type-2 devices with memory) the primary motivation is to enable a
simple way for cxl_test to intercept those operations.
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/165784338418.1758207.14659830845389904356.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Currently the ptrace-gpr test only tests the GET/SET(FP)REGS ptrace
APIs. But there's an alternate (older) API, called PEEK/POKEUSR.
Add some minimal testing of PEEK/POKEUSR of the FPRs. This is sufficient
to detect the bug that was fixed recently in the 32-bit ptrace FPR
handling.
Depends-on: 8e1278444446 ("powerpc/32: Fix overread/overwrite of thread_struct via ptrace")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The ptrace-gpr test uses fixed values to test that registers can be
read/written via ptrace. In particular it sets all GPRs to 1, which
means the test could miss some types of bugs - eg. if the kernel was
only returning the low word.
So generate some random values at startup and use those instead.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Use the FAIL_IF() macro so that errors in the child report a line
number, rather than just silently exiting.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The ptrace-gpr test includes some inline asm to load GPR and FPR
registers. It then goes back to C to wait for the parent to trace it and
then checks register contents.
The split between inline asm and C is fragile, it relies on the compiler
not using any non-volatile GPRs after the inline asm block. It also
requires a very large and unwieldy inline asm block.
So convert the logic to set registers, wait, and store registers to a
single asm function, meaning there's no window for the compiler to
intervene.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The ptrace-gpr test can now be built 32-bit, so do that if that's the
compiler default rather than forcing a 64-bit build.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Some of the ptrace tests check the contents of floating pointer
registers. Currently these use float, which is always 4 bytes, but the
ptrace API supports saving/restoring 8 bytes per register, so switch to
using doubles to exercise the code more fully.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This function is never called, drop it.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for 32-bit builds to the asm helpers.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore r2 (TOC pointer), but none of the
selftests change r2, so it's unnecessary to save it by default.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Thare are some asm helpers for creating/popping stack frames in
basic_asm.h. They always save/restore CR, but none of the selftests
tests touch non-volatile CR fields, so it's unnecessary to save them by
default.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently all ptrace tests are built 64-bit and with TM enabled.
Only the TM tests need TM enabled, so split those out into a separate
variable so that can be specified precisely.
Split the rest of the tests into a variable, and add -m64 to CFLAGS for
those tests, so that in a subsequent patch some tests can be made to
build 32-bit.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Set LOCAL_HDRS so header changes cause rebuilds. The lib.mk logic adds
all the headers in LOCAL_HDRS as dependencies, so there's no need to
also list them explicitly.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The PUSH/POP_BASIC_STACK helpers in basic_asm.h do not ensure that the
stack pointer is always 16-byte aligned, which is required per the ABI.
Fix the macros to do the alignment if the caller fails to.
Currently only one caller passes a non-aligned size, tm_signal_self(),
which hasn't been caught in testing, presumably because it's a leaf
function.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add selftests for io_uring zerocopy sends and io_uring's notification
infrastructure. It's largely influenced by msg_zerocopy and uses it on
the receive side.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/03d5ec78061cf52db420f88ed0b48eb8f47ce9f7.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
The commit 208003254c32 ("selftests/kprobe: Do not test for GRP/
without event failures") removed a syntax which is no more cause
a syntax error (NO_EVENT_NAME error with GRP/).
However, there are another case (NO_EVENT_NAME error without GRP/)
which causes a same error. This adds a test for that case.
Link: https://lkml.kernel.org/r/165812790993.1377963.9762767354560397298.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
A new feature is added where kprobes (and other probes) do not need to
explicitly state the event name when creating a probe. The event name will
come from what is being attached.
That is:
# echo 'p:foo/ vfs_read' > kprobe_events
Will no longer error, but instead create an event:
# cat kprobe_events
p:foo/p_vfs_read_0 vfs_read
This should not be tested as an error case anymore. Remove it from the
selftest as now this feature "breaks" the selftest as it no longer fails
as expected.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add kprobe and eprobe event test for new GRP/ only format.
Link: https://lore.kernel.org/all/[email protected]/
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Tom Zanussi <[email protected]>
Signed-off-by: Linyu Yuan <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
|
|
Daniel Borkmann says:
====================
bpf-next 2022-07-22
We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).
The main changes are:
1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.
2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
syscalls through kprobe mechanism, from Andrii Nakryiko.
3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
function, from Song Liu & Jiri Olsa.
4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.
5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
with kernel symbols, from Alan Maguire.
6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.
7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.
8) libbpf support for writing custom perf event readers, from Jon Doron.
9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.
10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.
11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.
12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.
13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.
14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.
15) Make non-prealloced BPF map allocations low priority to play better with
memcg limits, from Yafang Shao.
16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.
17) Various smaller cleanups and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
bpf: Simplify bpf_prog_pack_[size|mask]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
bpf, x64: Allow to use caller address from stack
ftrace: Allow IPMODIFY and DIRECT ops on the same function
ftrace: Add modify_ftrace_direct_multi_nolock
bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
selftests/bpf: Fix test_verifier failed test in unprivileged mode
selftests/bpf: Add negative tests for new nf_conntrack kfuncs
selftests/bpf: Add tests for new nf_conntrack kfuncs
selftests/bpf: Add verifier tests for trusted kfunc args
net: netfilter: Add kfuncs to set and change CT status
net: netfilter: Add kfuncs to set and change CT timeout
net: netfilter: Add kfuncs to allocate and insert CT
net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
bpf: Add documentation for kfuncs
bpf: Add support for forcing kfunc args to be trusted
bpf: Switch to new kfunc flags infrastructure
tools/resolve_btfids: Add support for 8-byte BTF sets
bpf: Introduce 8-byte BTF set
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Before change:
selftests: bpf: test_xdp_veth.sh
Couldn't retrieve pinned program '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
selftests: xdp_veth [SKIP]
ok 20 selftests: bpf: test_xdp_veth.sh # SKIP
After change:
PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data.
64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.320 ms
--- 10.1.1.33 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.320/0.320/0.320/0.000 ms
selftests: xdp_veth [PASS]
For the test case, the following can be found:
ls /sys/fs/bpf/test_xdp_veth/progs/redirect_map_0
ls: cannot access '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
ls /sys/fs/bpf/test_xdp_veth/progs/
xdp_redirect_map_0 xdp_redirect_map_1 xdp_redirect_map_2
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jie2x Zhou <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Ping sockets don't appear to make any attempt to preserve flow labels
created and set by userspace using IPV6_FLOWINFO_SEND. Instead they are
clobbered by autolabels (if enabled) or zero.
Grab the flowlabel out of the msghdr similar to how rawv6_sendmsg does
it and move the memset up so it doesn't get zeroed after.
Signed-off-by: Alan Brady <[email protected]>
Tested-by: Gurucharan <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Loading the BTF won't be permitted without privileges, hence only test
for privileged mode by setting the prog type. This makes the
test_verifier show 0 failures when unprivileged BPF is enabled.
Fixes: 41188e9e9def ("selftest/bpf: Test for use-after-free bug fix in inline_bpf_loop")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test cases we care about and ensure improper usage is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce selftests for the following kfunc helpers:
- bpf_xdp_ct_alloc
- bpf_skb_ct_alloc
- bpf_ct_insert_entry
- bpf_ct_set_timeout
- bpf_ct_change_timeout
- bpf_ct_set_status
- bpf_ct_change_status
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Make sure verifier rejects the bad cases and ensure the good case keeps
working. The selftests make use of the bpf_kfunc_call_test_ref kfunc
added in the previous patch only for verification.
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Instead of populating multiple sets to indicate some attribute and then
researching the same BTF ID in them, prepare a single unified BTF set
which indicates whether a kfunc is allowed to be called, and also its
attributes if any at the same time. Now, only one call is needed to
perform the lookup for both kfunc availability and its attributes.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a test for recv timeout. Place it in the tls_err
group, so it only runs for TLS 1.2 and 1.3 but not
for every AEAD out there.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <[email protected]>
|
|
Previously the target routing specifics of switch decoders and platform
CXL window resource tracking of root decoders were factored out of
'struct cxl_decoder'. While switch decoders translate from SPA to
downstream ports, endpoint decoders translate from SPA to DPA.
This patch, 3 of 3, adds a 'struct cxl_endpoint_decoder' that tracks an
endpoint-specific Device Physical Address (DPA) resource. For now this
just defines ->dpa_res, a follow-on patch will handle requesting DPA
resource ranges from a device-DPA resource tree.
Co-developed-by: Ben Widawsky <[email protected]>
Signed-off-by: Ben Widawsky <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/165784327088.1758207.15502834501671201192.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Currently 'struct cxl_decoder' contains the superset of attributes
needed for all decoder types. Before more type-specific attributes are
added to the common definition, reorganize 'struct cxl_decoder' into type
specific objects.
This patch, the first of three, factors out a cxl_switch_decoder type.
See the new kdoc for what a 'struct cxl_switch_decoder' represents in a
CXL topology.
Co-developed-by: Ben Widawsky <[email protected]>
Signed-off-by: Ben Widawsky <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/165784325340.1758207.5064717153608954960.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
This patch fixes a build error reported in the link. [0]
unix_connect.c: In function ‘unix_connect_test’:
unix_connect.c:115:55: error: expected identifier before ‘(’ token
#define offsetof(type, member) ((size_t)&((type *)0)->(member))
^
unix_connect.c:128:12: note: in expansion of macro ‘offsetof’
addrlen = offsetof(struct sockaddr_un, sun_path) + variant->len;
^~~~~~~~
We can fix this by removing () around member, but checkpatch will complain
about it, and the root cause of the build failure is that I followed the
warning and fixed this in the v2 -> v3 change of the blamed commit. [1]
CHECK: Macro argument 'member' may be better as '(member)' to avoid precedence issues
#33: FILE: tools/testing/selftests/net/af_unix/unix_connect.c:115:
+#define offsetof(type, member) ((size_t)&((type *)0)->member)
To avoid this warning, let's use offsetof() defined in stddef.h instead.
[0]: https://lore.kernel.org/linux-mm/[email protected]/
[1]: https://lore.kernel.org/netdev/[email protected]/
Fixes: e95ab1d85289 ("selftests: net: af_unix: Test connect() with different netns.")
Reported-by: kernel test robot <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When building selftests out of the kernel tree the gpio.h the include
path is incorrect and the build falls back to the system includes
which may be outdated.
Add the KHDR_INCLUDES to the CFLAGS to include the gpio.h from the
build tree.
Fixes: 4f4d0af7b2d9 ("selftests: gpio: restore CFLAGS options")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Kent Gibson <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Change verbose and movable node build options to run-time options.
Movable node usage:
$ ./main -m
Or:
$ ./main --movable-node
Verbose usage:
$ ./main -v
Or:
$ ./main --verbose
Signed-off-by: Rebecca Mckeever <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The snprintf() function returns the number of bytes which *would*
have been copied if there were space. In other words, it can be
> sizeof(pin_path).
Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/YtZ+aD/tZMkgOUw+@kili
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add test validating that libbpf adjusts (and reflects adjusted) ringbuf
size early, before bpf_object is loaded. Also make sure we can't
successfully resize ringbuf map after bpf_object is loaded.
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a simple big 16MB array and validate access to the very last byte of
it to make sure that kernel supports > KMALLOC_MAX_SIZE value_size for
BPF array maps (which are backing .bss in this case).
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Convert few selftest that used plain SEC("kprobe") with arch-specific
syscall wrapper prefix to ksyscall/kretsyscall and corresponding
BPF_KSYSCALL macro. test_probe_user.c is especially benefiting from this
simplification.
Tested-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Exercise libbpf's logic for unknown __weak virtual __kconfig externs.
USDT selftests are already excercising non-weak known virtual extern
already (LINUX_HAS_BPF_COOKIE), so no need to add explicit tests for it.
Tested-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Booting with vsyscall=xonly results in the following vsyscall VMA:
ffffffffff600000-ffffffffff601000 --xp ... [vsyscall]
Test does read from fixed vsyscall address to determine if kernel
supports vsyscall page but it doesn't work because, well, vsyscall
page is execute only.
Fix test by trying to execute from the first byte of the page which
contains gettimeofday() stub. This should work because vsyscall
entry points have stable addresses by design.
Alexey, avoiding parsing .config, /proc/config.gz and
/proc/cmdline at all costs.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The objective is to test device migration mechanism in pages marked as
COW, for private and coherent device type. In case of writing to COW
private page(s), a page fault will migrate pages back to system memory
first. Then, these pages will be duplicated. In case of COW device
coherent type, pages are duplicated directly from device memory.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alex Sierra <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Ralph Campbell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The intention is to test hmm device coherent type under different get user
pages paths. Also, test gup with FOLL_LONGTERM flag set in device
coherent pages. These pages should get migrated back to system memory.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alex Sierra <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Felix Kuehling <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Ralph Campbell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add two more parameters to set spm_addr_dev0 & spm_addr_dev1 addresses.
These two parameters configure the start SP addresses for each device in
test_hmm driver. Consequently, this configures zone device type as
coherent.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alex Sierra <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Ralph Campbell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Test cases such as migrate_fault and migrate_multiple, were modified to
explicit migrate from device to sys memory without the need of page
faults, when using device coherent type.
Snapshot test case updated to read memory device type first and based on
that, get the proper returned results migrate_ping_pong test case added to
test explicit migration from device to sys memory for both private and
coherent zone types.
Helpers to migrate from device to sys memory and vicerversa were also
added.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alex Sierra <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Ralph Campbell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add "protected_keys" tests to "run_vmtests.sh" would help run all VM
related tests from a single shell script.
[[email protected]: Shuah Khan's review comments incorporated, added -x executable check]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kalpana Shetty <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
accept_untracked_na
ipv4 arp_accept has a new option '2' to create new neighbor entries
only if the src ip is in the same subnet as an address configured on
the interface that received the garp message. This selftest tests all
options in arp_accept.
ipv6 has a sysctl endpoint, accept_untracked_na, that defines the
behavior for accepting untracked neighbor advertisements. A new option
similar to that of arp_accept for learning only from the same subnet is
added to accept_untracked_na. This selftest tests this new feature.
Signed-off-by: Jaehee Park <[email protected]>
Suggested-by: Roopa Prabhu <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Selftest already has support for testing UID and GID transitions.
Signed-off-by: Micah Morton <[email protected]>
|
|
GID security policies were added back in v5.10, update the selftest to
reflect this.
Signed-off-by: Micah Morton <[email protected]>
|