aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2023-01-13selftests: mptcp: userspace: validate v4-v6 subflows mixMatthieu Baerts1-0/+47
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: [email protected] # v5.19+ Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-13selftests/bpf: Fix missing space errorRoberto Valenzuela1-1/+1
Add the missing space after 'dest' variable assignment. This change will resolve the following checkpatch.pl script error: ERROR: spaces required around that '+=' (ctx:VxW) Signed-off-by: Roberto Valenzuela <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-01-13selftests/landlock: Skip overlayfs tests when not supportedJeff Xu1-0/+47
overlayfs may be disabled in the kernel configuration, causing related tests to fail. Check that overlayfs is supported at runtime, so we can skip layout2_overlay.* accordingly. Signed-off-by: Jeff Xu <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] [mic: Reword comments and constify variables] Signed-off-by: Mickaël Salaün <[email protected]>
2023-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-75/+133
drivers/net/usb/r8152.c be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit") ec51fbd1b8a2 ("r8152: add USB device driver for config selection") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-12Merge tag 'net-6.2-rc4' of ↵Linus Torvalds2-74/+130
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from rxrpc. The rxrpc changes are noticeable large: to address a recent regression has been necessary completing the threaded refactor. Current release - regressions: - rxrpc: - only disconnect calls in the I/O thread - move client call connection to the I/O thread - fix incoming call setup race - eth: mlx5: - restore pkt rate policing support - fix memory leak on updating vport counters Previous releases - regressions: - gro: take care of DODGY packets - ipv6: deduct extension header length in rawv6_push_pending_frames - tipc: fix unexpected link reset due to discovery messages Previous releases - always broken: - sched: disallow noqueue for qdisc classes - eth: ice: fix potential memory leak in ice_gnss_tty_write() - eth: ixgbe: fix pci device refcount leak - eth: mlx5: - fix command stats access after free - fix macsec possible null dereference when updating MAC security entity (SecY)" * tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) r8152: add vendor/device ID pair for Microsoft Devkit net: stmmac: add aux timestamps fifo clearance wait bnxt: make sure we return pages to the pool net: hns3: fix wrong use of rss size during VF rss config ipv6: raw: Deduct extension header length in rawv6_push_pending_frames net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit() net: sched: disallow noqueue for qdisc classes iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak octeontx2-pf: Fix resource leakage in VF driver unbind selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure. selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns. selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad". net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) net/mlx5e: Fix macsec ssci attribute handling in offload path net/mlx5: E-switch, Coverity: overlapping copy net/mlx5e: Don't support encap rules with gbp option net/mlx5: Fix ptp max frequency adjustment range net/mlx5e: Fix memory leak on updating vport counters ...
2023-01-12kselftest: Fix error message for unconfigured LLVM buildsMark Brown1-1/+1
We are missing a ) when we attempt to complain about not having enough configuration for clang, resulting in the rather inscrutable error: ../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop. Add the required ) so we print the message we were trying to print. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-01-12kselftest/arm64: Run BTI selftests on systems without BTIMark Brown1-15/+10
The BTI selftests are built both with and without BTI support, validating both the generation of BTI signals as expected for binaries without BTI support. Both versions of the binary currently skip all their tests when the system does not support BTI, however this is excessive since we do have a defined ABI for how the programs should function in this case (especially for the non-BTI binary). Update the test program to run all the tests unconditionally, adding a runtime adjustment of the expected results on systems that don't support BTI where we currently handle the build time case. The tests all use HINT space instructions, BTI itself is a HINT as is are the PAC instructions that function as landing pads, so nothing in the tests depends on support for BTI in the kernel or hardware. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12kselftest/arm64: Fix test numbering when skipping testsMark Brown1-1/+1
Currently when skipping tests in the BTI testsuite we assign the same number to every test since we forget to increment the current test number as we skip, causing warnings about not running the expected test count and potentially otherwise confusing result parsers. Fix this by adding an appropriate increment. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stressMark Brown1-1/+4
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm will be making a retroactive change to SVE to remove the possibility of selecting non power of two vector lengths. This has no impact on existing physical implementations but most virtual implementations have implemented the full range of permissible vector lengths. Given how demanding fp-stress is for these implementations update to only attempt to enumerate the power of two vector lengths, reducing the load created on existing virtual implementations and only exercising the functionality that will be seen in physical implementations. [1] https://developer.arm.com/documentation/102105/ia-00/ Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12kselftest/arm64: Only enumerate power of two VLs in syscall-abiMark Brown1-2/+2
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm will be making a retroactive change to SVE to remove the possibility of selecting non power of two vector lengths. This has no impact on existing physical implementations but most virtual implementations have implemented the full range of permissible vector lengths. Since virtual implementations are noticeably slow in general and the larger vector lengths amplify the issue there's a useful improvement in runtime from only covering the vector lengths that will exist in practical systems, adjust our enumeration accordingly. We have other tests that aim to cover the enumeration interfaces. For symmetry we apply the same change to the eumeration for SME vector lengths, though the power of two restriction was already present for SME so there is no impact on the set of vector lengths tested. [1] https://developer.arm.com/documentation/102105/ia-00/ Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12kselftest/arm64: Verify SME only ABI in syscall-abiMark Brown2-6/+42
Currently syscall-abi only covers SME in the case where the system supports SVE however it is architecturally valid to support SME without SVE. Update the program to cover this case, this requires adjustments in the code to check for SVCR.SM being set when deciding if we're handling the FPSIMD or SVE registers and the addition of new test cases for the SME only case. Note that in the SME only case we should not save the SVE registers after a syscall since even if we were in streaming mode and therefore set them the syscall should have exited streaming mode, we check that we have done so by looking at SVCR. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12kselftest/arm64: Only enumerate VLs once in syscall-abiMark Brown1-54/+41
Currently syscall-abi not only enumerates the SVE VLs twice while working out how many tests are planned, it also repeats the enumeration process while doing the actual tests. Record the VLs when we enumerate and use that list when we are performing the tests, removing some duplicated logic. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12kselftest/arm64: Fix syscall-abi for systems without 128 bit SMEMark Brown1-0/+8
SME does not mandate any specific VL so we may not have 128 bit SME but the algorithm used for enumerating VLs assumes that we will. Add the required check to ensure that the algorithm terminates. Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-01-12test/vsock: vsock_perf utilityArseniy Krasnov3-1/+463
This adds utility to check vsock rx/tx performance. Usage as sender: ./vsock_perf --sender <cid> --port <port> --bytes <bytes to send> Usage as receiver: ./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT> Signed-off-by: Arseniy Krasnov <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-12test/vsock: add big message testArseniy Krasnov1-0/+69
This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-12test/vsock: rework message bounds testArseniy Krasnov5-15/+157
This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-12selftests/rseq: Revert "selftests/rseq: Add mm_numa_cid to test script"Mathieu Desnoyers1-5/+0
The mm_numa_cid related rseq patches from the series were not picked up into the tip tree, so enabling the mm_numa_cid test needs to be reverted. This reverts commit b344b8f2d88dbf095caf97ac57fd3645843fa70f. Reported-by: kernel test robot <[email protected]> Signed-off-by: Mathieu Desnoyers <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/oe-lkp/[email protected]
2023-01-11selftests/xsk: automatically switch XDP programsMagnus Karlsson4-68/+96
Implement automatic switching of XDP programs and execution modes if needed by a test. This makes it much simpler to write a test as it only has to say what XDP program it needs if it is not the default one. This also makes it possible to remove the initial explicit attachment of the XDP program as well as the explicit mode switch in the code. These are now handled by the same code that just checks if a switch is necessary, so no special cases are needed. The default XDP program for all tests is one that sends all packets to the AF_XDP socket. If you need another one, please use the new function test_spec_set_xdp_prog() to specify what XDP programs and maps to use for this test. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: automatically restore packet streamMagnus Karlsson1-14/+1
Automatically restore the default packet stream if needed at the end of each test. This so that test writers do not forget to do this. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: merge dual and single thread dispatchersMagnus Karlsson1-66/+54
Make the thread dispatching code common by unifying the dual and single thread dispatcher code. This so we do not have to add code in two places in upcoming commits. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: add test when some packets are XDP_DROPedMagnus Karlsson3-0/+43
Add a new test where some of the packets are not passed to the AF_XDP socket and instead get a XDP_DROP verdict. This is important as it tests the recycling mechanism of the buffer pool. If a packet is not sent to the AF_XDP socket, the buffer the packet resides in is instead recycled so it can be used again without the round-trip to user space. The test introduces a new XDP program that drops every other packet. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: get rid of built-in XDP programMagnus Karlsson6-106/+92
Get rid of the built-in XDP program that was part of the old libbpf code in xsk.c and replace it with an eBPF program build using the framework by all the other bpf selftests. This will form the base for adding more programs in later commits. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: remove unnecessary code in control pathMagnus Karlsson3-631/+3
Remove unnecessary code in the control path. This is located in the file xsk.c that was moved from libbpf when the xsk support there was deprecated. Some of the code there is not needed anymore as the selftests are only guaranteed to run on the kernel it is shipped with. Therefore, all the code that has to deal with compatibility of older kernels can be dropped and also any other function that is not of any use for the tests. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: load and attach XDP program only once per modeMagnus Karlsson4-87/+162
Load and attach the XDP program only once per XDP mode that is being executed. Today, the XDP program is loaded and attached for every test, then unloaded, which takes a long time on real NICs, since they have to reconfigure their HW, in contrast to veth. The test suite now completes in 21 seconds, instead of 207 seconds previously on my machine. This is a speed-up of around 10x. This is accomplished by moving the XDP loading from the worker threads to the main thread and replacing the XDP loading interfaces of xsk.c that was taken from the xsk support in libbpf, with something more explicit that is more useful for these tests. Instead, the relevant file descriptors and ifindexes are just passed down to the new functions. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: remove namespacesMagnus Karlsson4-74/+20
Remove the namespaces used as they fill no function. This will simplify the code for speeding up the tests in the following commits. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: replace asm acquire/release implementationsMagnus Karlsson1-76/+4
Replace our own homegrown assembly store/release and load/acquire implementations with the HW agnositic atomic APIs C11 offers. This to make the code more portable, easier to read, and reduce the maintenance burden. The original code used load-acquire and store-release barriers hand-coded in assembly. Since C11, these kind of operations are offered as built-ins in gcc and llvm. The load-acquire operation prevents hoisting of non-atomic memory operations to before this operation and it corresponds to the __ATOMIC_ACQUIRE operation in the built-in atomics. The store-release operation prevents hoisting of non-atomic memory operations to after this operation and it corresponds to the __ATOMIC_RELEASE operation in the built-in atomics. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: add debug option for creating netdevsMagnus Karlsson1-1/+10
Add a new option to the test_xsk.sh script that only creates the two veth netdevs and the extra namespace, then exits without running any tests. The failed test can then be executed in the debugger without having to create the netdevs and namespace manually. For ease-of-use, the veth netdevs to use are printed so they can be copied into the debugger. Here is an example how to use it: > sudo ./test_xsk.sh -d veth10 veth11 > gdb xskxceiver In gdb: run -i veth10 -i veth11 And now the test cases can be debugged with gdb. If you want to debug the test suite on a real NIC in loopback mode, there is no need to use this feature as you already know the netdev of your NIC. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: remove unused variable outstanding_txMagnus Karlsson1-2/+0
Remove the unused variable outstanding_tx. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: print correct error codes when exitingMagnus Karlsson1-9/+9
Print the correct error codes when exiting the test suite due to some terminal error. Some of these had a switched sign and some of them printed zero instead of errno. Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL") Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: submit correct number of frames in populate_fill_ringMagnus Karlsson1-1/+1
Submit the correct number of frames in the function xsk_populate_fill_ring(). For the tests that set the flag use_addr_for_fill, uninitialized buffers were sent to the fill ring following the correct ones. This has no impact on the tests, since they only use the ones that were initialized. But for correctness, this should be fixed. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: do not close unused file descriptorsMagnus Karlsson1-2/+11
Do not close descriptors that have never been used. File descriptor fields that are not in use are erroneously marked with the number 0, which is a valid fd. Mark unused fds with -1 instead and do not close these when deleting the socket. Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11selftests/xsk: print correct payload for packet dumpMagnus Karlsson1-2/+2
Print the correct payload when the packet dump option is selected. The network to host conversion was forgotten and the payload was erronously declared to be an int instead of an unsigned int. Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL") Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-11proc: fix PIE proc-empty-vm, proc-pid-vm testsAlexey Dobriyan2-9/+12
vsyscall detection code uses direct call to the beginning of the vsyscall page: asm ("call %P0" :: "i" (0xffffffffff600000)) It generates "call rel32" instruction but it is not relocated if binary is PIE, so binary segfaults into random userspace address and vsyscall page status is detected incorrectly. Do more direct: asm ("call *%rax") which doesn't do need any relocaltions. Mark g_vsyscall as volatile for a good measure, I didn't find instruction setting it to 0. Now the code is obviously correct: xor eax, eax mov rdi, rbp mov rsi, rbp mov DWORD PTR [rip+0x2d15], eax # g_vsyscall = 0 mov rax, 0xffffffffff600000 call rax mov DWORD PTR [rip+0x2d02], 1 # g_vsyscall = 1 mov eax, DWORD PTR ds:0xffffffffff600000 mov DWORD PTR [rip+0x2cf1], 2 # g_vsyscall = 2 mov edi, [rip+0x2ceb] # exit(g_vsyscall) call exit Note: fixed proc-empty-vm test oopses 5.19.0-28-generic kernel but this is separate story. Link: https://lkml.kernel.org/r/Y7h2xvzKLg36DSq8@p183 Fixes: 5bc73bb3451b9 ("proc: test how it holds up with mapping'less process") Signed-off-by: Alexey Dobriyan <[email protected]> Reported-by: Mirsad Goran Todorovac <[email protected]> Tested-by: Mirsad Goran Todorovac <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-01-11selftests: netfilter: fix transaction test script timeout handlingFlorian Westphal2-7/+10
The kselftest framework uses a default timeout of 45 seconds for all test scripts. Increase the timeout to two minutes for the netfilter tests, this should hopefully be enough, Make sure that, should the script be canceled, the net namespace and the spawned ping instances are removed. Fixes: 25d8bcedbf43 ("selftests: add script to stress-test nft packet path vs. control plane") Reported-by: Mirsad Goran Todorovac <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Tested-by: Mirsad Goran Todorovac <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-01-10selftests/nolibc: Add `getpagesize(2)` selftestAmmar Faizi1-0/+30
Test the getpagesize() function. Make sure it returns the correct value. Signed-off-by: Ammar Faizi <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.Guillaume Nault1-4/+36
Use 'set -e' and an exit handler to stop the script if a command fails and ensure the test environment is cleaned up in any case. Also, handle the case where the script is interrupted by SIGINT. The only command that's expected to fail is 'wait $ping_pid', since it's killed by the script. Handle this case with '|| true' to make it play well with 'set -e'. Finally, return the Kselftest SKIP code (4) when the script breaks because of an environment problem or a command line failure. The 0 and 1 return codes should now reliably indicate that all tests have been run (0: all tests run and passed, 1: all tests run but at least one failed, 4: test script didn't run completely). Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <[email protected]> Tested-by: Mirsad Goran Todorovac <[email protected]> Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.Guillaume Nault1-69/+93
This selftest currently runs half in the current namespace and half in a netns of its own. Therefore, the test can fail if the current namespace is already configured with incompatible parameters (for example if it already has a veth0 interface). Adapt the script to put both ends of the veth pair in their own netns. Now veth0 is created in NS0 instead of the current namespace, while veth1 is set up in NS1 (instead of the 'testing' netns). The user visible netns names are randomised to minimise the risk of conflicts with already existing namespaces. The cleanup() function doesn't need to remove the virtual interface anymore: deleting NS0 and NS1 automatically removes the virtual interfaces they contained. We can remove $ns, which was only used to run ip commands in the 'testing' netns (let's use the builtin "-netns" option instead). However, we still need a similar functionality as ping and tcpdump now need to run in NS0. So we now have $RUN_NS0 for that. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <[email protected]> Tested-by: Mirsad Goran Todorovac <[email protected]> Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".Guillaume Nault1-4/+4
The ping command can run before DAD completes. In that case, ping may fail and break the selftest. We don't need DAD here since we're working on isolated device pairs. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-09rcutorture: build initrd for rcutorture with nolibcSven Schnelle1-1/+1
This reduces the size of init from ~600KB to ~1KB. Signed-off-by: Sven Schnelle <[email protected]> Acked-by: Heiko Carstens <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2023-01-09rcutorture: add support for s390Sven Schnelle1-0/+6
Add the required values to identify_qemu() and identify_bootimage(). Signed-off-by: Sven Schnelle <[email protected]> Acked-by: Heiko Carstens <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2023-01-09selftests/nolibc: add s390 supportSven Schnelle1-1/+6
Signed-off-by: Sven Schnelle <[email protected]> Acked-by: Heiko Carstens <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2023-01-09af_unix: selftest: Fix the size of the parameter to connect()Mirsad Goran Todorovac1-1/+1
Adjust size parameter in connect() to match the type of the parameter, to fix "No such file or directory" error in selftests/net/af_unix/ test_oob_unix.c:127. The existing code happens to work provided that the autogenerated pathname is shorter than sizeof (struct sockaddr), which is why it hasn't been noticed earlier. Visible from the trace excerpt: bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060 [pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory) BUG: The filename is trimmed to sizeof (struct sockaddr). Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Florian Westphal <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Mirsad Goran Todorovac <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-09selftest: mptcp: add test for mptcp socket in useMenglong Dong1-5/+51
Add the function chk_msk_inuse() to diag.sh, which is used to check the statistics of mptcp socket in use. As mptcp socket in listen state will be closed randomly after 'accept', we need to get the count of listening mptcp socket through 'ss' command. All tests pass. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-09selftest: mptcp: exit from copyfd_io_poll() when receive SIGUSR1Menglong Dong1-2/+2
For now, mptcp_connect won't exit after receiving the 'SIGUSR1' signal if '-r' is set. Fix this by skipping poll and sleep in copyfd_io_poll() if 'quit' is set. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-08mm: Always release pages to the buddy allocator in memblock_free_late().Aaron Thompson1-0/+4
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages() only releases pages to the buddy allocator if they are not in the deferred range. This is correct for free pages (as defined by for_each_free_mem_pfn_range_in_zone()) because free pages in the deferred range will be initialized and released as part of the deferred init process. memblock_free_pages() is called by memblock_free_late(), which is used to free reserved ranges after memblock_free_all() has run. All pages in reserved ranges have been initialized at that point, and accordingly, those pages are not touched by the deferred init process. This means that currently, if the pages that memblock_free_late() intends to release are in the deferred range, they will never be released to the buddy allocator. They will forever be reserved. In addition, memblock_free_pages() calls kmsan_memblock_free_pages(), which is also correct for free pages but is not correct for reserved pages. KMSAN metadata for reserved pages is initialized by kmsan_init_shadow(), which runs shortly before memblock_free_all(). For both of these reasons, memblock_free_pages() should only be called for free pages, and memblock_free_late() should call __free_pages_core() directly instead. One case where this issue can occur in the wild is EFI boot on x86_64. The x86 EFI code reserves all EFI boot services memory ranges via memblock_reserve() and frees them later via memblock_free_late() (efi_reserve_boot_services() and efi_free_boot_services(), respectively). If any of those ranges happens to fall within the deferred init range, the pages will not be released and that memory will be unavailable. For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI: v6.2-rc2: # grep -E 'Node|spanned|present|managed' /proc/zoneinfo Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 178867 v6.2-rc2 + patch: # grep -E 'Node|spanned|present|managed' /proc/zoneinfo Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 222816 # +43,949 pages Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Signed-off-by: Aaron Thompson <[email protected]> Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com Signed-off-by: Mike Rapoport (IBM) <[email protected]>
2023-01-08Merge tag 'fixes-2023-01-08' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fixes from Mike Rapoport: "Small fixes in kernel-doc and tests: - Fix kernel-doc for memblock_phys_free() to use correct names for the counterpart allocation methods - Fix compilation error in memblock tests" * tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: Fix doc for memblock_phys_free memblock tests: Fix compilation error.
2023-01-07selftests/membarrier: Test MEMBARRIER_CMD_GET_REGISTRATIONSMichal Clapinski3-2/+39
Keep track of previously issued registrations and compare the result with MEMBARRIER_CMD_GET_REGISTRATIONS return value. Signed-off-by: Michal Clapinski <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Mathieu Desnoyers <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski26-148/+478
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-05tools/testing/cxl: Prevent cxl_test from confusing production modulesDan Williams8-0/+69
The cxl_test machinery builds modified versions of the modules in drivers/cxl/ and intercepts some of their calls to allow cxl_test to inject mock CXL topologies for test. However, if cxl_test attempts the same with production modules, fireworks ensue as Luis discovered [1]. Prevent that scenario by arranging for cxl_test to check for a "watermark" symbol in each of the modules it expects to be modified before the test can run. This turns undefined runtime behavior or crashes into a safer failure to load the cxl_test module. Link: http://lore.kernel.org/r/[email protected] [1] Reported-by: Luis Chamberlain <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds13-6/+391
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
Powered by cgit, Gruvboxed by Blaster4385.