| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Note that we can't guess the listener family anymore based on the client
target address: always use IPv6.
The fullmesh flag with endpoints from different families is also
validated here.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Exercise IP_LOCAL_PORT_RANGE socket option in various scenarios:
1. pass invalid values to setsockopt
2. pass a range outside of the per-netns port range
3. configure a single-port range
4. exhaust a configured multi-port range
5. check interaction with late-bind (IP_BIND_ADDRESS_NO_PORT)
6. set then get the per-socket port range
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Ensures that whenever bpf_setsockopt() is called with the SOL_TCP
option on a ktls enabled socket, the call will be accepted by the
system. The provided test makes sure of this by performing an
examination when the server side socket is in the CLOSE_WAIT state. At
this stage, ktls is still enabled on the server socket and can be used
to test if bpf_setsockopt() works correctly with linux.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
size_t is limited to 32-bits and so the gen_pool_alloc() using
the size of SZ_64G would map to 0, triggering a low allocation
which is not expected. Force the dependency on 64-bit for cxl_test
as that is what it was designed for.
This issue was found by build test reports when converting this
driver as a proper upstream driver.
Signed-off-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
In a set of prior changes, we added the ability for struct_ops programs
to be sleepable. This patch enhances the dummy_st_ops selftest suite to
validate this behavior by adding a new sleepable struct_ops entry to
dummy_st_ops.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
BPF struct_ops programs currently cannot be marked as sleepable. This
need not be the case -- struct_ops programs can be sleepable, and e.g.
invoke kfuncs that export the KF_SLEEPABLE flag. So as to allow future
struct_ops programs to invoke such kfuncs, this patch updates the
verifier to allow struct_ops programs to be sleepable. A follow-on patch
will add support to libbpf for specifying struct_ops.s as a sleepable
struct_ops program, and then another patch will add testcases to the
dummy_st_ops selftest suite which test sleepable struct_ops behavior.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
As stated in README.rst, in order to resolve errors with linker errors,
'LDLIBS=-static' should be used. Most problems will be solved by this
option, but in the case of urandom_read, this won't fix the problem. So
the Makefile is currently implemented to strip the 'static' option when
compiling the urandom_read. However, stripping this static option isn't
configured properly on $(LDLIBS) correctly, which is now causing errors
on static compilation.
# LDLIBS=-static ./vmtest.sh
ld.lld: error: attempted static link of dynamic object liburandom_read.so
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [Makefile:190: /linux/tools/testing/selftests/bpf/urandom_read] Error 1
make: *** Waiting for unfinished jobs....
This commit fixes this problem by configuring the strip with $(LDLIBS).
Fixes: 68084a136420 ("selftests/bpf: Fix building bpf selftests statically")
Signed-off-by: Daniel T. Lee <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Revert the portion of a recent Makefile change that incorrectly
deletes source files when doing "make clean".
Fixes: ba2d788aa873 ("selftests: amd-pstate: Trigger tbench benchmark and test cpus")
Reported-by: Sedat Dilek <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Reviewed-by: Sedat Dilek <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Doug Smythies <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
A recent patch added a new set of kfuncs for allocating, freeing,
manipulating, and querying cpumasks. This patch adds a new 'cpumask'
selftest suite which verifies their behavior.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Now that defining trusted fields in a struct is supported, we should add
selftests to verify the behavior. This patch adds a few such testcases.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
KF_TRUSTED_ARGS kfuncs currently have a subtle and insidious bug in
validating pointers to scalars. Say that you have a kfunc like the
following, which takes an array as the first argument:
bool bpf_cpumask_empty(const struct cpumask *cpumask)
{
return cpumask_empty(cpumask);
}
...
BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...
If a BPF program were to invoke the kfunc with a NULL argument, it would
crash the kernel. The reason is that struct cpumask is defined as a
bitmap, which is itself defined as an array, and is accessed as a memory
address by bitmap operations. So when the verifier analyzes the
register, it interprets it as a pointer to a scalar struct, which is an
array of size 8. check_mem_reg() then sees that the register is NULL and
returns 0, and the kfunc crashes when it passes it down to the cpumask
wrappers.
To fix this, this patch adds a check for KF_ARG_PTR_TO_MEM which
verifies that the register doesn't contain a possibly-NULL pointer if
the kfunc is KF_TRUSTED_ARGS.
Signed-off-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Update the selftests to include a test of passing a stacktrace between the
events of a synthetic event.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Ching-lin Yu <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
With the new filter logic of passing in the name of a function to match an
instruction pointer (or the address of the function), add a test to make
sure that it is functional.
This is also the first test to test plain filtering. The filtering has
been tested via the trigger logic, which uses the same code, but there was
nothing to test just the event filter, so this test is the first to add
such a case.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Andrew Morton <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Zheng Yejian <[email protected]>
Cc: [email protected]
Suggested-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Today we test if a child socket is cloned properly from a listening socket
inside a sockmap only when there are no BPF programs attached to the map.
A bug has been reported [1] for the case when sockmap has a verdict program
attached. So cover this case as well to prevent regressions.
[1]: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Sitnicki <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Following patch extends the sockmap ops tests to cover the scenario when a
sockmap with attached programs holds listening sockets.
Pass the BPF skeleton to sockmap ops test so that the can access and attach
the BPF programs.
Signed-off-by: Jakub Sitnicki <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When developing tests, it is much faster to use the QEMU Linux
emulator instead of the system emulator, which among other things avoids
kernel-build latencies. Although use of the QEMU Linux emulator does have
its limitations (please see below), it is sufficient to test startup code,
stdlib code, and syscall calling conventions.
However, the current mainline Linux-kernel nolibc setup does not
support this. Therefore, add a "run-user" target that immediately
executes the prebuilt executable.
Again, this approach does have its limitations. For example, the
executable runs with the user's privilege level, which can cause some
false-positive failures due to insufficient permissions. In addition,
if the underlying kernel is old enough to lack some features that
nolibc relies on, the result will be false-positive failures in the
corresponding tests. However, for nolibc changes not affected by these
limittions, the result is a much faster code-compile-test-debug cycle.
With this patch, running a userland test is as simple as issuing:
make ARCH=xxx CROSS_COMPILE=xxx run-user
Signed-off-by: Willy Tarreau <[email protected]>
Tested-by: Ammar Faizi <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Building the kernel with ARCH=x86_64 works fine, but nolibc-test
only supports "x86", which causes errors when reusing existing build
environment. Let's permit this environment to be used as well by making
nolibc also accept ARCH=x86_64.
Signed-off-by: Willy Tarreau <[email protected]>
Tested-by: Ammar Faizi <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Remove the assumption from kvm_binary_stats_test that all stats are
laid out contiguously in memory. The current stats in KVM are
contiguously laid out in memory, but that may change in the future and
the ABI specifically allows holes in the stats data (since each stat
exposes its own offset).
While here drop the check that each stats' offset is less than
size_data, as that is now always true by construction.
Link: https://lore.kernel.org/kvm/[email protected]/
Fixes: 0b45d58738cd ("KVM: selftests: Add selftest for KVM statistics data binary interface")
Signed-off-by: Jing Zhang <[email protected]>
[dmatlack: Re-worded the commit message.]
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
The semicolon after the "}" is unneeded.
Signed-off-by: zhang songyi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Use the host CPU's native hypercall instruction, i.e. VMCALL vs. VMMCALL,
in kvm_hypercall(), as relying on KVM to patch in the native hypercall on
a #UD for the "wrong" hypercall requires KVM_X86_QUIRK_FIX_HYPERCALL_INSN
to be enabled and flat out doesn't work if guest memory is encrypted with
a private key, e.g. for SEV VMs.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Vishal Annapurve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Cache the host CPU vendor for userspace and share it with guest code.
All the current callers of this_cpu* actually care about host cpu so
they are updated to check host_cpu_is*.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Vishal Annapurve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Replace is_intel/amd_cpu helpers with this_cpu_* helpers to better
convey the intent of querying vendor of the current cpu.
Suggested-by: Sean Christopherson <[email protected]>
Reviewed-by: David Matlack <[email protected]>
Signed-off-by: Vishal Annapurve <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
The assert incorrectly identifies the ioctl being called. Switch it
from KVM_GET_MSRS to KVM_SET_MSRS.
Fixes: 6ebfef83f03f ("KVM: selftest: Add proper helpers for x86-specific save/restore ioctls")
Signed-off-by: Aaron Lewis <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
kvm_vm_elf_load() and elfhdr_get() open one file each, but they
never close the opened file descriptor. If a test repeatedly
creates and destroys a VM with __vm_create(), which
(directly or indirectly) calls those two functions, the test
might end up getting a open failure with EMFILE.
Fix those two functions to close the file descriptor.
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add testing to show that a pmu event can be filtered with a generalized
match on it's unit mask.
These tests set up test cases to demonstrate various ways of filtering
a pmu event that has multiple unit mask values. It does this by
setting up the filter in KVM with the masked events provided, then
enabling three pmu counters in the guest. The test then verifies that
the pmu counters agree with which counters should be counting and which
counters should be filtered for both a sparse filter list and a dense
filter list.
Signed-off-by: Aaron Lewis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Test that masked events are not using invalid bits, and if they are,
ensure the pmu event filter is not accepted by KVM_SET_PMU_EVENT_FILTER.
The only valid bits that can be used for masked events are set when
using KVM_PMU_ENCODE_MASKED_ENTRY() with one exception: If any of the
high bits (35:32) of the event select are set when using Intel, the pmu
event filter will fail.
Also, because validation was not being done prior to the introduction
of masked events, only expect validation to fail when masked events
are used. E.g. in the first test a filter event with all its bits set
is accepted by KVM_SET_PMU_EVENT_FILTER when flags = 0.
Signed-off-by: Aaron Lewis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that the flags field can be non-zero, pass it in when creating a
pmu event filter.
This is needed in preparation for testing masked events.
No functional change intended.
Signed-off-by: Aaron Lewis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
|
|
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%[email protected]/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <[email protected]>
CC: Xin Long <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Reviewed-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In commit 72653ae5303c ("selftests: net: tcp_mmap:
Use huge pages in send path") I made a change to use hugepages
for the buffer used by the client (tx path)
Today, I understood that the cause for poor zerocopy
performance was that after a mmap() for a 512KB memory
zone, kernel uses a single zeropage, mapped 128 times.
This was really the reason for poor tx path performance
in zero copy mode, because this zero page refcount is
under high pressure, especially when TCP ACK packets
are processed on another cpu.
We need either to force a COW on all the memory range,
or use MAP_POPULATE so that a zero page is not abused.
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Turns out splice() is one of the syscalls that's using current maximum
number of arguments (six). This is perfect for testing, so extend
bpf_syscall_macro selftest to also trace splice() syscall, using
BPF_KSYSCALL() macro. This makes sure all the syscall argument register
definitions are correct.
Suggested-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Alan Maguire <[email protected]> # arm64
Tested-by: Ilya Leoshkevich <[email protected]> # s390x
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update uprobe_autoattach selftest to validate architecture-specific
argument passing through registers. Use new BPF_UPROBE and
BPF_URETPROBE, and construct both BPF-side and user-space side in such
a way that for different architectures we are fetching and checking
different number of arguments, matching architecture-specific limit of
how many registers are available for argument passing.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Alan Maguire <[email protected]> # arm64
Tested-by: Ilya Leoshkevich <[email protected]> # s390x
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In commit 537c3f66eac1 ("selftests/bpf: add generic BPF program tester-loader"),
a new mechanism was added to the BPF selftest framework to allow testsuites to
use macros to define expected failing testcases.
This allows any testsuite which tests verification failure to remove a good
amount of boilerplate code. This patch updates the task_kfunc selftest suite
to use these new macros.
Signed-off-by: David Vernet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The test_cmd_destroy_access() should end with a semicolon, so add one.
There is a test_ioctl_destroy(ioas_id) following already, so drop one.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
To be used for verification of driver implementations. Note that
the skb path is gone from the series, but I'm still keeping the
implementation for any possible future work.
$ xdp_hw_metadata <ifname>
On the other machine:
$ echo -n xdp | nc -u -q1 <target> 9091 # for AF_XDP
$ echo -n skb | nc -u -q1 <target> 9092 # for skb
Sample output:
# xdp
xsk_ring_cons__peek: 1
0x19f9090: rx_desc[0]->addr=100000000008000 addr=8100 comp_addr=8000
rx_timestamp_supported: 1
rx_timestamp: 1667850075063948829
0x19f9090: complete idx=8 addr=8000
# skb
found skb hwtstamp = 1668314052.854274681
Decoding:
# xdp
rx_timestamp=1667850075.063948829
$ date -d @1667850075
Mon Nov 7 11:41:15 AM PST 2022
$ date
Mon Nov 7 11:42:05 AM PST 2022
# skb
$ date -d @1668314052
Sat Nov 12 08:34:12 PM PST 2022
$ date
Sat Nov 12 08:37:06 PM PST 2022
Cc: John Fastabend <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Anatoly Burakov <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Magnus Karlsson <[email protected]>
Cc: Maryam Tahhan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
- create new netns
- create veth pair (veTX+veRX)
- setup AF_XDP socket for both interfaces
- attach bpf to veRX
- send packet via veTX
- verify the packet has expected metadata at veRX
Cc: John Fastabend <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Anatoly Burakov <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Magnus Karlsson <[email protected]>
Cc: Maryam Tahhan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Generic check has a different error message, update the selftest.
Cc: John Fastabend <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Anatoly Burakov <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Magnus Karlsson <[email protected]>
Cc: Maryam Tahhan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
reclaim_period_ms used to be positive only but the commit 0001725d0f9b
("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input
validation") incorrectly changed it to non-negative validation.
Change validation to allow only positive input.
Fixes: 0001725d0f9b ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation")
Signed-off-by: Vipin Sharma <[email protected]>
Reported-by: Ben Gardon <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Placing a declaration of evt_reset is pedantically invalid
according to the C standard. While GCC does not really care
and only warns with -Wpedantic, clang ignores the declaration
altogether with an error:
x86_64/xen_shinfo_test.c:965:2: error: expected expression
struct kvm_xen_hvm_attr evt_reset = {
^
x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset
vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset);
^
Reported-by: Yu Zhang <[email protected]>
Reported-by: Sean Christopherson <[email protected]>
Fixes: a79b53aaaab5 ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28)
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
First test that we allow overwriting dynptr slots and reinitializing
them in unreferenced case, and disallow overwriting for referenced case.
Include tests to ensure slices obtained from destroyed dynptrs are being
invalidated on their destruction. The destruction needs to be scoped, as
in slices of dynptr A should not be invalidated when dynptr B is
destroyed. Next, test that MEM_UNINIT doesn't allow writing dynptr stack
slots.
Acked-by: Joanne Koong <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Try creating a dynptr, then overwriting second slot with first slot of
another dynptr. Then, the first slot of first dynptr should also be
invalidated, but without our fix that does not happen. As a consequence,
the unfixed case allows passing first dynptr (as the kernel check only
checks for slot_type and then first_slot == true).
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Ensure that variable offset is handled correctly, and verifier takes
both fixed and variable part into account. Also ensures that only
constant var_off is allowed.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add verifier tests that verify the new pruning behavior for STACK_DYNPTR
slots, and ensure that state equivalence takes into account changes to
the old and current verifier state correctly. Also ensure that the
stacksafe changes are actually enabling pruning in case states are
equivalent from pruning PoV.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
A set of macros useful for writing naked BPF functions using inline
assembly. E.g. as follows:
struct map_struct {
...
} map SEC(".maps");
SEC(...)
__naked int foo_test(void)
{
asm volatile(
"r0 = 0;"
"*(u64*)(r10 - 8) = r0;"
"r1 = %[map] ll;"
"r2 = r10;"
"r2 += -8;"
"call %[bpf_map_lookup_elem];"
"r0 = 0;"
"exit;"
:
: __imm(bpf_map_lookup_elem),
__imm_addr(map)
: __clobber_all);
}
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
[ Kartikeya: Add acks, include __clobber_common from Andrii ]
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The previous commit implemented destroy_if_dynptr_stack_slot. It
destroys the dynptr which given spi belongs to, but still doesn't
invalidate the slices that belong to such a dynptr. While for the case
of referenced dynptr, we don't allow their overwrite and return an error
early, we still allow it and destroy the dynptr for unreferenced dynptr.
To be able to enable precise and scoped invalidation of dynptr slices in
this case, we must be able to associate the source dynptr of slices that
have been obtained using bpf_dynptr_data. When doing destruction, only
slices belonging to the dynptr being destructed should be invalidated,
and nothing else. Currently, dynptr slices belonging to different
dynptrs are indistinguishible.
Hence, allocate a unique id to each dynptr (CONST_PTR_TO_DYNPTR and
those on stack). This will be stored as part of reg->id. Whenever using
bpf_dynptr_data, transfer this unique dynptr id to the returned
PTR_TO_MEM_OR_NULL slice pointer, and store it in a new per-PTR_TO_MEM
dynptr_id register state member.
Finally, after establishing such a relationship between dynptrs and
their slices, implement precise invalidation logic that only invalidates
slices belong to the destroyed dynptr in destroy_if_dynptr_stack_slot.
Acked-by: Joanne Koong <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently, while reads are disallowed for dynptr stack slots, writes are
not. Reads don't work from both direct access and helpers, while writes
do work in both cases, but have the effect of overwriting the slot_type.
While this is fine, handling for a few edge cases is missing. Firstly,
a user can overwrite the stack slots of dynptr partially.
Consider the following layout:
spi: [d][d][?]
2 1 0
First slot is at spi 2, second at spi 1.
Now, do a write of 1 to 8 bytes for spi 1.
This will essentially either write STACK_MISC for all slot_types or
STACK_MISC and STACK_ZERO (in case of size < BPF_REG_SIZE partial write
of zeroes). The end result is that slot is scrubbed.
Now, the layout is:
spi: [d][m][?]
2 1 0
Suppose if user initializes spi = 1 as dynptr.
We get:
spi: [d][d][d]
2 1 0
But this time, both spi 2 and spi 1 have first_slot = true.
Now, when passing spi 2 to dynptr helper, it will consider it as
initialized as it does not check whether second slot has first_slot ==
false. And spi 1 should already work as normal.
This effectively replaced size + offset of first dynptr, hence allowing
invalid OOB reads and writes.
Make a few changes to protect against this:
When writing to PTR_TO_STACK using BPF insns, when we touch spi of a
STACK_DYNPTR type, mark both first and second slot (regardless of which
slot we touch) as STACK_INVALID. Reads are already prevented.
Second, prevent writing to stack memory from helpers if the range may
contain any STACK_DYNPTR slots. Reads are already prevented.
For helpers, we cannot allow it to destroy dynptrs from the writes as
depending on arguments, helper may take uninit_mem and dynptr both at
the same time. This would mean that helper may write to uninit_mem
before it reads the dynptr, which would be bad.
PTR_TO_MEM: [?????dd]
Depending on the code inside the helper, it may end up overwriting the
dynptr contents first and then read those as the dynptr argument.
Verifier would only simulate destruction when it does byte by byte
access simulation in check_helper_call for meta.access_size, and
fail to catch this case, as it happens after argument checks.
The same would need to be done for any other non-trivial objects created
on the stack in the future, such as bpf_list_head on stack, or
bpf_rb_root on stack.
A common misunderstanding in the current code is that MEM_UNINIT means
writes, but note that writes may also be performed even without
MEM_UNINIT in case of helpers, in that case the code after handling meta
&& meta->raw_mode will complain when it sees STACK_DYNPTR. So that
invalid read case also covers writes to potential STACK_DYNPTR slots.
The only loophole was in case of meta->raw_mode which simulated writes
through instructions which could overwrite them.
A future series sequenced after this will focus on the clean up of
helper access checks and bugs around that.
Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently, the dynptr function is not checking the variable offset part
of PTR_TO_STACK that it needs to check. The fixed offset is considered
when computing the stack pointer index, but if the variable offset was
not a constant (such that it could not be accumulated in reg->off), we
will end up a discrepency where runtime pointer does not point to the
actual stack slot we mark as STACK_DYNPTR.
It is impossible to precisely track dynptr state when variable offset is
not constant, hence, just like bpf_timer, kptr, bpf_spin_lock, etc.
simply reject the case where reg->var_off is not constant. Then,
consider both reg->off and reg->var_off.value when computing the stack
pointer index.
A new helper dynptr_get_spi is introduced to hide over these details
since the dynptr needs to be located in multiple places outside the
process_dynptr_func checks, hence once we know it's a PTR_TO_STACK, we
need to enforce these checks in all places.
Note that it is disallowed for unprivileged users to have a non-constant
var_off, so this problem should only be possible to trigger from
programs having CAP_PERFMON. However, its effects can vary.
Without the fix, it is possible to replace the contents of the dynptr
arbitrarily by making verifier mark different stack slots than actual
location and then doing writes to the actual stack address of dynptr at
runtime.
Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs")
Acked-by: Joanne Koong <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
drivers/net/ipa/ipa_interrupt.c
drivers/net/ipa/ipa_interrupt.h
9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend")
8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()")
d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration")
https://lore.kernel.org/all/[email protected]/
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"Fix an error seen during unconfigured LLVM builds"
* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix error message for unconfigured LLVM builds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
|