aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2022-02-25KVM: selftests: Verify disabling PMU virtualization via KVM_CAP_CONFIG_PMUDavid Dunn1-0/+33
On a VM with PMU disabled via KVM_CAP_PMU_CONFIG, the PMU should not be usable by the guest. Signed-off-by: David Dunn <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: selftests: Carve out helper to create "default" VM without vCPUsDavid Dunn2-6/+18
Carve out portion of vm_create_default so that selftests can modify a "default" VM prior to creating vcpus. Signed-off-by: David Dunn <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3Mark Brown3-2/+13
The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Tested-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-24selftests: mptcp: do complete cleanup at exitPaolo Abeni1-2/+2
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-20/+68
tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge tag 'net-5.17-rc6' of ↵Linus Torvalds5-22/+166
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - regressions: - bpf: fix crash due to out of bounds access into reg2btf_ids - mvpp2: always set port pcs ops, avoid null-deref - eth: marvell: fix driver load from initrd - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC" Current release - new code bugs: - mptcp: fix race in overlapping signal events Previous releases - regressions: - xen-netback: revert hotplug-status changes causing devices to not be configured - dsa: - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - fix panic when removing unoffloaded port from bridge - dsa: microchip: fix bridging with more than two member ports Previous releases - always broken: - bpf: - fix crash due to incorrect copy_map_value when both spin lock and timer are present in a single value - fix a bpf_timer initialization issue with clang - do not try bpf_msg_push_data with len 0 - add schedule points in batch ops - nf_tables: - unregister flowtable hooks on netns exit - correct flow offload action array size - fix a couple of memory leaks - vsock: don't check owner in vhost_vsock_stop() while releasing - gso: do not skip outer ip header in case of ipip and net_failover - smc: use a mutex for locking "struct smc_pnettable" - openvswitch: fix setting ipv6 fields causing hw csum failure - mptcp: fix race in incoming ADD_ADDR option processing - sysfs: add check for netdevice being present to speed_show - sched: act_ct: fix flow table lookup after ct clear or switching zones - eth: intel: fixes for SR-IOV forwarding offloads - eth: broadcom: fixes for selftests and error recovery - eth: mellanox: flow steering and SR-IOV forwarding fixes Misc: - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends not report freed skbs as drops - force inlining of checksum functions in net/checksum.h" * tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: mv643xx_eth: process retval from of_get_mac_address ping: remove pr_err from ping_lookup Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" openvswitch: Fix setting ipv6 fields causing hw csum failure ipv6: prevent a possible race condition with lifetimes net/smc: Use a mutex for locking "struct smc_pnettable" bnx2x: fix driver load from initrd Revert "xen-netback: Check for hotplug-status existence before watching" Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion ...
2022-02-23selftests/lkdtm: Add UBSAN configMuhammad Usama Anjum1-0/+1
UBSAN_BOUNDS and UBSAN_TRAP depend on UBSAN config option. merge_config.sh script generates following warnings if parent config doesn't have UBSAN config already enabled and UBSAN_BOUNDS/UBSAN_TRAP config options don't get added to the parent config. Value requested for CONFIG_UBSAN_BOUNDS not in final .config Requested value: CONFIG_UBSAN_BOUNDS=y Actual value: Value requested for CONFIG_UBSAN_TRAP not in final .config Requested value: CONFIG_UBSAN_TRAP=y Actual value: Fix this by including UBSAN config. Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests") Signed-off-by: Muhammad Usama Anjum <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests/lkdtm: Remove dead config optionMuhammad Usama Anjum1-1/+0
CONFIG_HARDENED_USERCOPY_FALLBACK config option has been removed in commit 53944f171a89 ("mm: remove HARDENED_USERCOPY_FALLBACK"). Remove it from the lkdtm selftest config. Signed-off-by: Muhammad Usama Anjum <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests/exec: Rename file binfmt_script to binfmt_script.pyMuhammad Usama Anjum2-1/+1
Rename file for readability purpose. Update its usage and references. Signed-off-by: Muhammad Usama Anjum <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: Use -isystem instead of -I to include headersMuhammad Usama Anjum1-2/+2
Selftests need kernel headers and glibc for compilation. In compilation of selftests, uapi headers from kernel source are used instead of default ones while glibc has already been compiled with different header files installed in the operating system. So there can be redefination warnings from compiler. These warnings can be suppressed by using -isystem to include the uapi headers. Signed-off-by: Muhammad Usama Anjum <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: vm: remove dependecy from internal kernel macrosMuhammad Usama Anjum1-0/+3
The defination of swap() is used from kernel's internal header when this test is built in source tree. The build fails when this test is built out of source tree as defination of swap() isn't found. Selftests shouldn't depend on kernel's internal header files. They can only depend on uapi header files. Add the defination of swap() to fix the build error: gcc -Wall -I/linux_mainline2/build/usr/include -no-pie userfaultfd.c -lrt -lpthread -o /linux_mainline2/build/kselftest/vm/userfaultfd userfaultfd.c: In function ‘userfaultfd_stress’: userfaultfd.c:1530:3: warning: implicit declaration of function ‘swap’; did you mean ‘swab’? [-Wimplicit-function-declaration] 1530 | swap(area_src, area_dst); | ^~~~ | swab /usr/bin/ld: /tmp/cclUUH7V.o: in function `userfaultfd_stress': userfaultfd.c:(.text+0x4d64): undefined reference to `swap' /usr/bin/ld: userfaultfd.c:(.text+0x4d82): undefined reference to `swap' collect2: error: ld returned 1 exit status Fixes: 2c769ed7137a ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner") Signed-off-by: Muhammad Usama Anjum <[email protected]> Reviewed-by: Alistair Popple <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: vm: Add the uapi headers include variableMuhammad Usama Anjum1-1/+1
Out of tree build of this test fails if relative path of the output directory is specified. Add the KHDR_INCLUDES to correctly reach the headers. Acked-by: Paolo Bonzini <[email protected]> Signed-off-by: Muhammad Usama Anjum <[email protected]> Tested-by: Alistair Popple <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: mptcp: Add the uapi headers include variableMuhammad Usama Anjum1-1/+1
Out of tree build of this test fails if relative path of the output directory is specified. Add the KHDR_INCLUDES to correctly reach the headers. Signed-off-by: Muhammad Usama Anjum <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: net: Add the uapi headers include variableMuhammad Usama Anjum1-1/+1
Out of tree build of this test fails if relative path of the output directory is specified. Add the KHDR_INCLUDES to correctly reach the headers. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: landlock: Add the uapi headers include variableMuhammad Usama Anjum1-1/+1
Out of tree build of this test fails if relative path of the output directory is specified. Add the KHDR_INCLUDES to correctly reach the headers. Signed-off-by: Muhammad Usama Anjum <[email protected]> Reviewed-by: Mickaël Salaün <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: kvm: Add the uapi headers include variableMuhammad Usama Anjum1-1/+1
Out of tree build of this test fails if relative path of the output directory is specified. Add KHDR_INCLUDES to correctly reach the headers. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: futex: Add the uapi headers include variableMuhammad Usama Anjum1-3/+2
Out of tree build of this test fails if relative path of the output directory is specified. KBUILD_OUTPUT also doesn't point to the correct directory when relative path is used. Thus out of tree builds fail. Remove the un-needed include paths and use KHDR_INCLUDES to correctly reach the headers. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: Correct the headers install pathMuhammad Usama Anjum1-1/+1
uapi headers should be installed at the top of the object tree, "<obj_tree>/usr/include". There is no need for kernel headers to be present at kselftest build directory, "<obj_tree>/kselftest/usr/ include" as well. This duplication can be avoided by correctly specifying the INSTALL_HDR_PATH. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: Add and export a kernel uapi headers pathMuhammad Usama Anjum1-0/+4
Kernel uapi headers can be present at different paths depending upon how the build was invoked. It becomes impossible for the tests to include the correct headers directory. Set and export KHDR_INCLUDES variable to make it possible for sub make files to include the header files. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: set the BUILD variable to absolute pathMuhammad Usama Anjum1-9/+17
The build of kselftests fails if relative path is specified through KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine the path of the output objects. When make is run from other directories with relative paths, the exact path of the build objects is ambiguous and build fails. make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa' gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test /usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test Set the BUILD variable to the absolute path of the output directory. Make the logic readable and easy to follow. Use spaces instead of tabs for indentation as if with tab indentation is considered recipe in make. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: futex: set DEFAULT_INSTALL_HDR_PATHMuhammad Usama Anjum1-0/+1
If only futex selftest is compiled, uapi header files are copied to the selftests/futex/functional directory. This copy isn't needed. Set the DEFAULT_INSTALL_HDR_PATH variable to 1 to use the default header install path only. This removes extra copy of header file. Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests/kselftest/runner.sh: Pass optional command parameters in environmentCristian Marussi1-1/+29
Some testcases allow for optional commandline parameters but as of now there is now way to provide such arguments to the runner script. Add support to retrieve such optional command parameters fron environment variables named so as to include the all-uppercase test executable name, sanitized substituting any non-acceptable varname characters with "_", following the pattern: KSELFTEST_<UPPERCASE_SANITIZED_TEST_NAME>_ARGS="options" Optional command parameters support is not available if 'tr' is not installed on the test system. Cc: Kees Cook <[email protected]> Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2022-02-23selftests: forwarding: tests of locked port featureHans Schultz3-0/+189
These tests check that the basic locked port feature works, so that no 'host' can communicate (ping) through a locked port unless the MAC address of the 'host' interface is in the forwarding database of the bridge. Signed-off-by: Hans Schultz <[email protected]> Acked-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-22testptp: add option to shift clock by nanosecondsMaciek Machnikowski1-4/+14
Add option to shift the clock by a specified number of nanoseconds. The new argument -n will specify the number of nanoseconds to add to the ptp clock. Since the API doesn't support negative shifts those needs to be calculated by subtracting full seconds and adding a nanosecond offset. Signed-off-by: Maciek Machnikowski <[email protected]> Acked-by: Richard Cochran <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-22Merge tag 'kvm-s390-next-5.18-1' of ↵Paolo Bonzini4-0/+244
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Changes for 5.18 part1 - add Claudio as Maintainer - first step to do proper storage key checking - testcase for missing memop check
2022-02-21selftests/bpf: Add test for reg2btf_ids out of bounds accessKumar Kartikeya Dwivedi1-0/+19
This test tries to pass a PTR_TO_BTF_ID_OR_NULL to the release function, which would trigger a out of bounds access without the fix in commit 45ce4b4f9009 ("bpf: Fix crash due to out of bounds access into reg2btf_ids.") but after the fix, it should only index using base_type(reg->type), which should be less than __BPF_REG_TYPE_MAX, and also not permit any type flags to be set for the reg->type. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-21selftests: fib_test: Add a test case for IPv4 broadcast neighboursIdo Schimmel1-1/+57
Test that resolved neighbours for IPv4 broadcast addresses are unaffected by the configuration of matching broadcast routes, whereas unresolved neighbours are invalidated. Without previous patch: # ./fib_tests.sh -t ipv4_bcast_neigh IPv4 broadcast neighbour tests TEST: Resolved neighbour for broadcast address [ OK ] TEST: Resolved neighbour for network broadcast address [ OK ] TEST: Unresolved neighbour for broadcast address [FAIL] TEST: Unresolved neighbour for network broadcast address [FAIL] Tests passed: 2 Tests failed: 2 With previous patch: # ./fib_tests.sh -t ipv4_bcast_neigh IPv4 broadcast neighbour tests TEST: Resolved neighbour for broadcast address [ OK ] TEST: Resolved neighbour for network broadcast address [ OK ] TEST: Unresolved neighbour for broadcast address [ OK ] TEST: Unresolved neighbour for network broadcast address [ OK ] Tests passed: 4 Tests failed: 0 Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-21Merge tag 'v5.17-rc5' into sched/core, to resolve conflictsIngo Molnar45-244/+658
New conflicts in sched/core due to the following upstream fixes: 44585f7bc0cb ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n") a06247c6804f ("psi: Fix uaf issue when psi trigger is destroyed while being polled") Conflicts: include/linux/psi_types.h kernel/sched/psi.c Signed-off-by: Ingo Molnar <[email protected]>
2022-02-21memblock tests: Add memblock_free testsKarolina Drobnik1-0/+203
Add checks for removing a region from reserved memory in different scenarios: - The requested region matches one in the collection of reserved memory regions - The requested region does not exist in memblock.reserved - The region overlaps with one of the entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/30af95c82754ad8029404c3b528a5ef1c05d1ed6.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_add_node testKarolina Drobnik1-0/+34
Add a simple test for NUMA-aware variant of memblock_add function. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/e2d0e6dd264c8c169242b556f7c5b12153f3dee5.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_remove testsKarolina Drobnik1-0/+205
Add checks for removing a region from available memory in different scenarios: - The requested region matches one in the collection of available memory regions - The requested region does not exist in memblock.memory - The region overlaps with one of the entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/8e6aa005407bbe1a75b75e85ac04ebb51318a52a.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_reserve testsKarolina Drobnik1-0/+217
Add checks for marking a region as reserved in different scenarios: - The region does not overlap with existing entries - The region overlaps with one of the previous entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region - The same region is marked as reserved twice Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/cac867d2b6c17e53d9e977b5d6cd88cc4e9453b6.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_add testsKarolina Drobnik1-0/+215
Add checks for adding a new region in different scenarios: - The region does not overlap with existing entries - The region overlaps with one of the previous entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region - The same region is added twice to the collection of available memory regions Add checks for memblock initialization to verify it sets memblock data structures to expected values. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/b6c26525025bccec0bf7419473d4d1293eb82b3b.1643796665.git.karolinadrobnik@gmail.com
2022-02-20Merge tag 'fs.mount_setattr.v5.17-rc4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull mount_setattr test/doc fixes from Christian Brauner: "This contains a fix for one of the selftests for the mount_setattr syscall to create idmapped mounts, an entry for idmapped mounts for maintainers, and missing kernel documentation for the helper we split out some time ago to get and yield write access to a mount when changing mount properties" * tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs: add kernel doc for mnt_{hold,unhold}_writers() MAINTAINERS: add entry for idmapped mounts tests: fix idmapped mount_setattr test
2022-02-20selftests/bpf: Fix btfgen testsAndrii Nakryiko3-7/+14
There turned out to be a few problems with btfgen selftests. First, core_btfgen tests are failing in BPF CI due to the use of full-featured bpftool, which has extra dependencies on libbfd, libcap, etc, which are present in BPF CI's build environment, but those shared libraries are missing in QEMU image in which test_progs is running. To fix this problem, use minimal bootstrap version of bpftool instead. It only depend on libelf and libz, same as libbpf, so doesn't add any new requirements (and bootstrap bpftool still implementes entire `bpftool gen` functionality, which is quite convenient). Second problem is even more interesting. Both core_btfgen and core_reloc reuse the same set of struct core_reloc_test_case array of test case definitions. That in itself is not a problem, but btfgen test replaces test_case->btf_src_file property with the path to temporary file into which minimized BTF is output by bpftool. This interferes with original core_reloc tests, depending on order of tests execution (core_btfgen is run first in sequential mode and skrews up subsequent core_reloc run by pointing to already deleted temporary file, instead of the original BTF files) and whether those two runs share the same process (in parallel mode the chances are high for them to run in two separate processes and so not interfere with each other). To prevent this interference, create and use local copy of a test definition. Mark original array as constant to catch accidental modifcations. Note that setup_type_id_case_success() and setup_type_id_case_success() still modify common test_case->output memory area, but it is ok as each setup function has to re-initialize it completely anyways. In sequential mode it leads to deterministic and correct initialization. In parallel mode they will either each have their own process, or if core_reloc and core_btfgen happen to be run by the same worker process, they will still do that sequentially within the worker process. If they are sharded across multiple processes, they don't really share anything anyways. Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just a "flavor" of core_reloc test, not an independent set of tests. So make it more obvious. Last problem that needed solving was that location of bpftool differs between test_progs and test_progs' flavors (e.g., test_progs-no_alu32). To keep it simple, create a symlink to bpftool both inside selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That way, from inside core_reloc test, location to bpftool is just "./bpftool". v2->v3: - fix bpftool location relative the test_progs-no_alu32; v1->v2: - fix corruption of core_reloc_test_case. Fixes: 704c91e59fe0 ("selftests/bpf: Test "bpftool gen min_core_btf") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yucong Sun <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-20memblock tests: Add memblock reset functionKarolina Drobnik6-1/+89
Memblock simulator needs to be able to reset memblock data structures between different test cases. Add a function that sets all fields to their default values. Add a test checking if memblock is being initialized to expected values. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/8c185aa7e0dd68c2c7e937c9a06c90ae413e240f.1643796665.git.karolinadrobnik@gmail.com
2022-02-20memblock tests: Add skeleton of the memblock simulatorKarolina Drobnik14-0/+268
Add basic project files, together with local stubs of required headers. Update tools/include/slab.h to include definitions used by memblock. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/d296fceb023a04b316a31fbff9acf1e76ac684e4.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools: Move gfp.h and slab.h from radix-tree to libKarolina Drobnik4-88/+2
Merge radix-tree definitions from gfp.h and slab.h with these in tools/lib, so they can be used in other test suites. Fix style issues in slab.h. Update radix-tree test files. Signed-off-by: Karolina Drobnik <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/b76ddb8a12fdf9870b55c1401213e44f5e0d0da3.1643796665.git.karolinadrobnik@gmail.com
2022-02-19selftests/bpf: Fix a clang deprecated-declarations compilation errorYonghong Song1-0/+3
Build the kernel and selftest with clang compiler with LLVM=1, make -j LLVM=1 make -C tools/testing/selftests/bpf -j LLVM=1 I hit the following selftests/bpf compilation error: In file included from test_cpp.cpp:3: /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:73:8: error: 'relaxed_core_relocs' is deprecated: libbpf v0.6+: field has no effect [-Werror,-Wdeprecated-declarations] struct bpf_object_open_opts { ^ test_cpp.cpp:56:2: note: in implicit move constructor for 'bpf_object_open_opts' first required here LIBBPF_OPTS(bpf_object_open_opts, opts); ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:77:3: note: expanded from macro 'LIBBPF_OPTS' (struct TYPE) { \ ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:90:2: note: 'relaxed_core_relocs' has been explicitly marked deprecated here LIBBPF_DEPRECATED_SINCE(0, 6, "field has no effect") ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:24:4: note: expanded from macro 'LIBBPF_DEPRECATED_SINCE' (LIBBPF_DEPRECATED("libbpf v" # major "." # minor "+: " msg)) ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:19:47: note: expanded from macro 'LIBBPF_DEPRECATED' #define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg))) There are two ways to fix the issue, one is to use GCC diagnostic ignore pragma, and the other is to open code bpf_object_open_opts instead of using LIBBPF_OPTS. Since in general LIBBPF_OPTS is preferred, the patch fixed the issue by adding proper GCC diagnostic ignore pragmas. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-19selftests: mptcp: be more conservative with cookie MPJ limitsPaolo Abeni1-3/+12
Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-19selftests: mptcp: more robust signal race testPaolo Abeni1-3/+12
The in kernel MPTCP PM implementation can process a single incoming add address option at any given time. In the mentioned test the server can surpass such limit. Let the setup cope with that allowing a faster add_addr retransmission. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254 Reported-and-tested-by: Matthieu Baerts <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-19selftests: mptcp: improve 'fair usage on close' stabilityPaolo Abeni1-1/+1
The mentioned test has to wait for a subflow creation failure. The current code looks for TCP sockets in TW state and sometimes misses the relevant event. Switch to a more stable check, looking for the associated mib counter. Fixes: 46e967d187ed ("selftests: mptcp: add tests for subflow creation failure") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257 Reported-and-tested-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-19selftests: mptcp: fix diag instabilityPaolo Abeni1-7/+37
Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258 Reported-and-tested-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-18selftests: KVM: allow sev_migrate_tests on machines without SEV-ESPaolo Bonzini1-21/+57
I managed to get hold of a machine that has SEV but not SEV-ES, and sev_migrate_tests fails because sev_vm_create(true) returns ENOTTY. Fix this, and while at it also return KSFT_SKIP on machines that do not have SEV at all, instead of returning 0. Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-18KVM: SEV: Allow SEV intra-host migration of VM with mirrorsPeter Gonda1-14/+33
For SEV-ES VMs with mirrors to be intra-host migrated they need to be able to migrate with the mirror. This is due to that fact that all VMSAs need to be added into the VM with LAUNCH_UPDATE_VMSA before lAUNCH_FINISH. Allowing migration with mirrors allows users of SEV-ES to keep the mirror VMs VMSAs during migration. Adds a list of mirror VMs for the original VM iterate through during its migration. During the iteration the owner pointers can be updated from the source to the destination. This fixes the ASID leaking issue which caused the blocking of migration of VMs with mirrors. Signed-off-by: Peter Gonda <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Marc Orr <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: [email protected] Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-17selftests: mptcp: add csum mib check for mptcp_connectGeliang Tang1-0/+19
This patch added the data checksum error mib counters check for the script mptcp_connect.sh when the data checksum is enabled. In do_transfer(), got the mib counters twice, before and after running the mptcp_connect commands. The latter minus the former is the actual number of the data checksum mib counter. The output looks like this: ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ] ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ] server got 1 data checksum error[s] Fixes: 94d66ba1d8e48 ("selftests: mptcp: enable checksum in mptcp_connect.sh") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255 Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17selftests: mptcp: join: check for tools only if neededMatthieu Baerts1-18/+20
To allow showing the 'help' menu even if these tools are not available. While at it, also avoid launching the command then checking $?. Instead, the check is directly done in the 'if'. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17selftests: mptcp: join: create tmp files only if neededMatthieu Baerts1-13/+24
These tmp files will only be created when a test will be launched. This avoid 'dd' output when '-h' is used for example. While at it, also avoid creating netns that will be removed when starting the first test. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17selftests: mptcp: join: remove unused varsMatthieu Baerts1-4/+1
Shellcheck found that these variables were set but never used. Note that rndh is no longer prefixed with '0-' but it doesn't change anything. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17selftests: mptcp: join: exit after usage()Matthieu Baerts1-1/+12
With an error if it is an unknown option. Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.