| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In preparation of skipping emitting static variables in BPF skeletons, switch
all current selftests uses of static variables to pass data between BPF and
user-space to use global variables.
All non-read-only `static volatile` variables become just plain global
variables by dropping `static volatile` part.
Read-only `static volatile const` variables, though, still require `volatile`
modifier, otherwise compiler will ignore whatever values are set from
user-space.
Few static linker tests are using name-conflicting static variables to
validate that static linker still properly handles static variables and
doesn't trip up on name conflicts.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As discussed in [0], this ports test_tc_redirect.sh to the test_progs
framework and removes the old test.
This makes it more in line with rest of the tests and makes it possible
to run this test case with vmtest.sh and under the bpf CI.
The upcoming skb_change_head() helper fix in [0] is depending on it and
extending the test case to redirect a packet from L3 device to veth.
[0] https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Jussi Maki <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently, if a torture scenario requires more CPUs than are present
on the build system, kvm.sh and friends limit the CPUs available to
that scenario. This makes total sense when the build system and the
system running the scenarios are one and the same, but not so much when
remote systems might well have more CPUs.
This commit therefore introduces a --remote flag to kvm.sh that suppresses
this CPU-limiting behavior, and causes kvm-remote.sh to use this flag.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
In a long-duration kvm-remote.sh run, almost all of the remote accesses will
be simple file-existence checks. These are thus the most likely to be caught
out by network failures, which do happen from time to time.
This commit therefore takes a first step towards tolerating temporary
network outages by making the file-existence checks repeat in the face of
such an outage. They also print a message every minute during a outage,
allowing the user to take appropriate action.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds the BUSTED-BOOST rcutorture scenario, which can be
used to test rcutorture's ability to test RCU priority boosting.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Some of the code invoked directly and indirectly from kvm.sh parses
the output of commands. This parsing assumes English, which can cause
failures if the user has set some other language. In a few cases,
there are language-independent commands available, but this is not
always the case. Therefore, as an alternative to polyglot parsing,
this commit sets the LANG environment variable to en_US.UTF-8.
Reported-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Grepping for "CPU" on lscpu output isn't always successful, depending
on the local language setting. As a result, the build can be aborted
early with:
"make: the '-j' option requires a positive integer argument"
This commit therefore uses the human-language-independent approach
available via the getconf command, both in kvm-build.sh and in
kvm-remote.sh.
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Currently, kvm-find-errors.sh assumes that if "--buildonly" appears in
the log file, then the run did builds but ran no kernels. This breaks
with kvm-remote.sh, which uses kvm.sh to do a build, then kvm-again.sh
to run the kernels built on remote systems. This commit therefore adds
a check for a kvm-remote.sh run.
While in the area, this commit checks for "--build-only" as well as
"--build-only".
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Given remote rcutorture runs, it is quite possible that the build system
will have fewer CPUs than the system(s) running the actual test scenarios.
In such cases, using the number of CPUs on the test systems can overload
the build system, slowing down the build or, worse, OOMing the build
system. This commit therefore uses the build system's CPU count to set
N in "make -jN", and by tradition sets "N" to double the CPU count.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit reduces duplicate code by making kvm.sh use the new
kvm-end-run-stats.sh script rather than taking its historical approach
of open-coding it.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit abstractst the end-of-run summary from kvm-again.sh, and,
while in the area, brings its format into line with that of kvm.sh.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The kvm-again.sh script relies on shell comments added to the qemu-cmd
file, but this means that code extracting values from the QEMU command in
this file must grep out those commment. Which kvm-recheck-rcu.sh failed
to do, which destroyed its grace-period-per-second calculation. This
commit therefore adds the needed "grep -v '^#'" to kvm-recheck-rcu.sh.
Fixes: 315957cad445 ("torture: Prepare for splitting qemu execution from kvm-test-1-run.sh")
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds a kvm-remote.sh script that prepares a tarball that
is then downloaded to the remote system(s) and executed. The user is
responsible for having set up the remote systems to run qemu, but all the
kernel builds are done on the system running the kvm-remote.sh script.
The user is also responsible for setting up the remote systems so that
ssh can be run non-interactively, given that ssh is used to poll the
remote systems in order to detect completion of each batch.
See the script's header comment for usage information.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in rcuscale's Kconfig
options are just a source of useless diagnostics. In addition, rcuscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in refscale's Kconfig
options are just a source of useless diagnostics. In addition, refscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit saves a few lines of code by making kvm-again.sh use the
"scenarios" file rather than the "batches" file, both of which are
generated by kvm.sh.
This results in a break point because new versions of kvm-again.sh cannot
handle "res" directories produced by old versions of kvm.sh, which lack
the "scenarios" file. In the unlikely event that this becomes a problem,
a trivial script suffices to convert the "batches" file to a "scenarios"
file, and this script may be easily extracted from kvm.sh.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds "--dryrun scenarios" to kvm.sh, which prints something
like this:
1. TREE03
2. TREE07
3. SRCU-P SRCU-N
4. TREE01 TRACE01
5. TREE02 TRACE02
6. TREE04 RUDE01 TASKS01
7. TREE05 TASKS03 SRCU-T SRCU-U
8. TASKS02 TINY01 TINY02 TREE09
This format is more convenient for scripts that run batches of scenarios.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Although "eval" was removed from torture.sh, that commit failed to
update the KCSAN instance of $* to "$@". This results in failures when
(for example) --bootargs is given more than one argument. This commit
therefore makes this change.
There is one remaining instance of $* in torture.sh, but this
is used only in the "echo" command, where quoting doesn't matter
so much.
Fixes: 197220d4a334 ("torture: Remove use of "eval" in torture.sh")
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
- Lots of bug fixes.
- Fix virtualization of RDPID
- Virtualization of DR6_BUS_LOCK, which on bare metal is new to this
release
- More nested virtualization migration fixes (nSVM and eVMCS)
- Fix for KVM guest hibernation
- Fix for warning in SEV-ES SRCU usage
- Block KVM from loading on AMD machines with 5-level page tables, due
to the APM not mentioning how host CR4.LA57 exactly impacts the
guest.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits)
KVM: SVM: Move GHCB unmapping to fix RCU warning
KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
kvm: Cap halt polling at kvm->max_halt_poll_ns
tools/kvm_stat: Fix documentation typo
KVM: x86: Prevent deadlock against tk_core.seq
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
KVM: X86: Expose bus lock debug exception to guest
KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
KVM: x86: Move uret MSR slot management to common x86
KVM: x86: Export the number of uret MSRs to vendor modules
KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
KVM: VMX: Use common x86's uret MSR list as the one true list
KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
KVM: VMX: Configure list of user return MSRs at module init
KVM: x86: Add support for RDPID without RDTSCP
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
...
|
|
Test that the new cgroup.kill feature works as intended.
Link: https://lore.kernel.org/r/[email protected]
Cc: Shakeel Butt <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: [email protected]
Acked-by: Roman Gushchin <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
as they will be used by the tests for cgroup killing.
Link: https://lore.kernel.org/r/[email protected]
Cc: Tejun Heo <[email protected]>
Cc: [email protected]
Reviewed-by: Shakeel Butt <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
If cgroup.kill file is supported make use of it.
Link: https://lore.kernel.org/r/[email protected]
Cc: Tejun Heo <[email protected]>
Cc: [email protected]
Reviewed-by: Shakeel Butt <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Explicitly include stddef.h when building the BTI tests so that we have
a definition of NULL, with at least some toolchains this is not done
implicitly by anything else:
test.c: In function ‘start’:
test.c:214:25: error: ‘NULL’ undeclared (first use in this function)
214 | sigaction(SIGILL, &sa, NULL);
| ^~~~
test.c:20:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
|
|
Clang's integrated assembler does not allow symbols with non-absolute
values to be reassigned. Modify the interrupt entry loop macro to be
compatible with IAS by using a label and an offset.
Cc: Jian Cai <[email protected]>
Signed-off-by: Bill Wendling <[email protected]>
References: https://lore.kernel.org/lkml/[email protected]/
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
eVMCS after restore
Add a test for the regression, introduced by commit f2c7ef3ba955
("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit"). When
L2->L1 exit is forced immediately after restoring nested state,
KVM_REQ_GET_NESTED_STATE_PAGES request is cleared and VMCS12 changes
(e.g. fresh RIP) are not reflected to eVMCS. The consequent nested
vCPU run gets broken.
Utilize NMI injection to do the job.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
'run->exit_reason == KVM_EXIT_SHUTDOWN' check is not ideal as we may be
getting some unexpected exception. Directly check for #UD instead.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Merge yet more updates from Andrew Morton:
"This is everything else from -mm for this merge window.
90 patches.
Subsystems affected by this patch series: mm (cleanups and slub),
alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat,
checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov,
panic, delayacct, gdb, resource, selftests, async, initramfs, ipc,
drivers/char, and spelling"
* emailed patches from Andrew Morton <[email protected]>: (90 commits)
mm: fix typos in comments
mm: fix typos in comments
treewide: remove editor modelines and cruft
ipc/sem.c: spelling fix
fs: fat: fix spelling typo of values
kernel/sys.c: fix typo
kernel/up.c: fix typo
kernel/user_namespace.c: fix typos
kernel/umh.c: fix some spelling mistakes
include/linux/pgtable.h: few spelling fixes
mm/slab.c: fix spelling mistake "disired" -> "desired"
scripts/spelling.txt: add "overflw"
scripts/spelling.txt: Add "diabled" typo
scripts/spelling.txt: add "overlfow"
arm: print alloc free paths for address in registers
mm/vmalloc: remove vwrite()
mm: remove xlate_dev_kmem_ptr()
drivers/char: remove /dev/kmem for good
mm: fix some typos and code style problems
ipc/sem.c: mundane typo fixes
...
|
|
'assert.h' included in 'sparsebit.c' is duplicated.
It is also included in the 161th line.
'string.h' included in 'mincore_selftest.c' is duplicated.
It is also included in the 15th line.
'sched.h' included in 'tlbie_test.c' is duplicated.
It is also included in the 33th line.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zhang Yunkai <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "fs/epoll: restore user-visible behavior upon event ready".
This series tries to address a change in user visible behavior, reported
in https://bugzilla.kernel.org/show_bug.cgi?id=208943.
Epoll does not report an event to all the threads running epoll_wait()
on the same epoll descriptor. Unsurprisingly, this was bisected back to
339ddb53d373 (fs/epoll: remove unnecessary wakeups of nested epoll), which
has had various problems in the past, beyond only nested epoll usage.
This patch (of 2):
This incorporates the testcase originally reported in:
https://bugzilla.kernel.org/show_bug.cgi?id=208943
Which ensures an event is reported to all threads blocked on the same
epoll descriptor, otherwise only a single thread will receive the wakeup
once the event become ready.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Davidlohr Bueso <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: Roman Penyaev <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Test that /proc instance mounted with
mount -t proc -o subset=pid
contains only ".", "..", "self", "thread-self" and pid directories.
Note:
Currently "subset=pid" doesn't return "." and ".." via readdir.
This must be a bug.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Acked-by: Alexey Gladkov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Now that proc_ops are separate from file_operations and other operations
it easy to check all instances to have ->proc_lseek hook and remove check
in main code.
Note:
nonseekable_open() files naturally don't require ->proc_lseek.
Garbage collect pde_lseek() function.
[[email protected]: smoke test lseek()]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/YFYX0Bzwxlc7aBa/@localhost.localdomain
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <[email protected]>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
|
|
When pages are pinned they can be faulted in userland and migrated, and
they can be faulted right in kernel without migration.
In either case, the pinned pages must end-up being pinnable (not
movable).
Add a new test to gup_test, to help verify that the gup/pup
(get_user_pages() / pin_user_pages()) behavior with respect to pinnable
and movable pages is reasonable and correct. Specifically, provide a
way to:
1) Verify that only "pinnable" pages are pinned. This is checked
automatically for you.
2) Verify that gup/pup performance is reasonable. This requires
comparing benchmarks between doing gup/pup on pages that have been
pre-faulted in from user space, vs. doing gup/pup on pages that are
not faulted in until gup/pup time (via FOLL_TOUCH). This decision is
controlled with the new -z command line option.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Pavel Tatashin <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tyler Hicks <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In gup_test both gup_flags and test_flags use the same flags field.
This is broken.
Farther, in the actual gup_test.c all the passed gup_flags are erased
and unconditionally replaced with FOLL_WRITE.
Which means that test_flags are ignored, and code like this always
performs pin dump test:
155 if (gup->flags & GUP_TEST_FLAG_DUMP_PAGES_USE_PIN)
156 nr = pin_user_pages(addr, nr, gup->flags,
157 pages + i, NULL);
158 else
159 nr = get_user_pages(addr, nr, gup->flags,
160 pages + i, NULL);
161 break;
Add a new test_flags field, to allow raw gup_flags to work. Add a new
subcommand for DUMP_USER_PAGES_TEST to specify that pin test should be
performed.
Remove unconditional overwriting of gup_flags via FOLL_WRITE. But,
preserve the previous behaviour where FOLL_WRITE was the default flag,
and add a new option "-W" to unset FOLL_WRITE.
Rename flags with gup_flags.
With the fix, dump works like this:
root@virtme:/# gup_test -c
---- page #0, starting from user virt addr: 0x7f8acb9e4000
page:00000000d3d2ee27 refcount:2 mapcount:1 mapping:0000000000000000
index:0x0 pfn:0x100bcf
anon flags: 0x300000000080016(referenced|uptodate|lru|swapbacked)
raw: 0300000000080016 ffffd0e204021608 ffffd0e208df2e88 ffff8ea04243ec61
raw: 0000000000000000 0000000000000000 0000000200000000 0000000000000000
page dumped because: gup_test: dump_pages() test
DUMP_USER_PAGES_TEST: done
root@virtme:/# gup_test -c -p
---- page #0, starting from user virt addr: 0x7fd19701b000
page:00000000baed3c7d refcount:1025 mapcount:1 mapping:0000000000000000
index:0x0 pfn:0x108008
anon flags: 0x300000000080014(uptodate|lru|swapbacked)
raw: 0300000000080014 ffffd0e204200188 ffffd0e205e09088 ffff8ea04243ee71
raw: 0000000000000000 0000000000000000 0000040100000000 0000000000000000
page dumped because: gup_test: dump_pages() test
DUMP_USER_PAGES_TEST: done
Refcount shows the difference between pin vs no-pin case.
Also change type of nr from int to long, as it counts number of pages.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Pavel Tatashin <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tyler Hicks <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix a dormant bug in userfaultfd_events_test(), where we did `return
faulting_process(0)` instead of `exit(faulting_process(0))`. This
caused the forked process to keep running, trying to execute any further
test cases after the events test in parallel with the "real" process.
Add a simple test case which exercises minor faults. In short, it does
the following:
1. "Sets up" an area (area_dst) and a second shared mapping to the same
underlying pages (area_dst_alias).
2. Register one of these areas with userfaultfd, in minor fault mode.
3. Start a second thread to handle any minor faults.
4. Populate the underlying pages with the non-UFFD-registered side of
the mapping. Basically, memset() each page with some arbitrary
contents.
5. Then, using the UFFD-registered mapping, read all of the page
contents, asserting that the contents match expectations (we expect
the minor fault handling thread can modify the page contents before
resolving the fault).
The minor fault handling thread, upon receiving an event, flips all the
bits (~) in that page, just to prove that it can modify it in some
arbitrary way. Then it issues a UFFDIO_CONTINUE ioctl, to setup the
mapping and resolve the fault. The reading thread should wake up and
see this modification.
Currently the minor fault test is only enabled in hugetlb_shared mode,
as this is the only configuration the kernel feature supports.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Axel Rasmussen <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Cc: Adam Ruprecht <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Cannon Matthews <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chinwen Chang <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: "Michal Koutn" <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Mina Almasry <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Shawn Anastasio <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Further extend <debugfs>/split_huge_pages to accept
"<path>,<pgoff_start>,<pgoff_end>" for file-backed THP split tests since
tmpfs may have file backed by THP that mapped nowhere.
Update selftest program to test file-backed THP split too.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zi Yan <[email protected]>
Suggested-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Mika Penttila <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We did not have a direct user interface of splitting the compound page
backing a THP and there is no need unless we want to expose the THP
implementation details to users. Make <debugfs>/split_huge_pages accept a
new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to
<debugfs>/split_huge_pages, THPs within the given virtual address range
from the process with the given pid are split. It is used to test
split_huge_page function. In addition, a selftest program is added to
tools/testing/selftests/vm to utilize the interface by splitting
PMD THPs and PTE-mapped THPs.
This does not change the old behavior, i.e., writing 1 to the interface
to split all THPs in the system.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zi Yan <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mika Penttila <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright notice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add unlikely hint to error path in dma_mapping_error
dma-mapping: benchmark: Add support for multi-pages map/unmap
dma-mapping: benchmark: use the correct HiSilicon copyright
dma-mapping: remove a pointless empty line in dma_alloc_coherent
media: uvcvideo: Use dma_alloc_noncontiguous API
dma-iommu: implement ->alloc_noncontiguous
dma-iommu: refactor iommu_dma_alloc_remap
dma-mapping: add a dma_alloc_noncontiguous API
dma-mapping: refactor dma_{alloc,free}_pages
dma-mapping: add a dma_mmap_pages helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/[email protected]/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/[email protected]/ [1]
Link: https://lore.kernel.org/lkml/[email protected]/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
|
|
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
|
LANG gives a weak default to each LC_* in case it is not explicitly
defined. LC_ALL, if set, overrides all other LC_* variables.
LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL
This is why documentation such as [1] suggests to set LC_ALL in build
scripts to get the deterministic result.
LANG=C is not strong enough to override LC_* that may be set by end
users.
[1]: https://reproducible-builds.org/docs/locales/
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Reviewed-by: Matthias Maennich <[email protected]>
Acked-by: Matthieu Baerts <[email protected]> (mptcp)
Reviewed-by: Greg Kroah-Hartman <[email protected]>
|
|
Merge misc updates from Andrew Morton:
"A few misc subsystems and some of MM.
175 patches.
Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <[email protected]>: (175 commits)
mm/memory-failure: unnecessary amount of unmapping
mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
net: page_pool: use alloc_pages_bulk in refill code path
net: page_pool: refactor dma_map into own function page_pool_dma_map
SUNRPC: refresh rq_pages using a bulk page allocator
SUNRPC: set rq_page_end differently
mm/page_alloc: inline __rmqueue_pcplist
mm/page_alloc: optimize code layout for __alloc_pages_bulk
mm/page_alloc: add an array-based interface to the bulk page allocator
mm/page_alloc: add a bulk page allocator
mm/page_alloc: rename alloced to allocated
mm/page_alloc: duplicate include linux/vmalloc.h
mm, page_alloc: avoid page_to_pfn() in move_freepages()
mm/Kconfig: remove default DISCONTIGMEM_MANUAL
mm: page_alloc: dump migrate-failed pages
mm/mempolicy: fix mpol_misplaced kernel-doc
mm/mempolicy: rewrite alloc_pages_vma documentation
mm/mempolicy: rewrite alloc_pages documentation
mm/mempolicy: rename alloc_pages_current to alloc_pages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end()
more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.
* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
powerpc/kasan: Fix shadow start address with modules
powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
powerpc/iommu: Annotate nested lock for lockdep
powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
powerpc/iommu: Allocate it_map by vmalloc
selftests/powerpc: remove unneeded semicolon
powerpc/64s: remove unneeded semicolon
powerpc/eeh: remove unneeded semicolon
powerpc/selftests: Add selftest to test concurrent perf/ptrace events
powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
powerpc/selftests/perf-hwbreak: Coalesce event creation code
powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
powerpc/configs: Add IBMVNIC to some 64-bit configs
selftests/powerpc: Add uaccess flush test
...
|
|
The testcase runs few instances of the program with RLIMIT_NPROC=1 from
user uid=60000, in different user namespaces.
Signed-off-by: Alexey Gladkov <[email protected]>
Link: https://lkml.kernel.org/r/28cafdcdd4abd8494b34a27f1970b666b30de8bf.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <[email protected]>
|
|
A 'single_cpu_test' parameter is odd and it does not exist anymore.
Instead there was introduced a 'nr_threads' one. If it is not set it
behaves as the former parameter.
That is why update a "stress mode" according to this change specifying
number of workers which are equal to number of CPUs. Also update an
output of help message based on a new interface.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Uladzislau Rezki (Sony) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Oleksiy Avramchenko <[email protected]>
Cc: Steven Rostedt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This test extends the current mremap tests to validate that the
MREMAP_DONTUNMAP operation can be performed on shmem mappings.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Brian Geffon <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: "Michael S . Tsirkin" <[email protected]>
Cc: Brian Geffon <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Sonny Rao <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Dmitry Safonov <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Alejandro Colomar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With memcg having switched to rstat, memory.stat output is precise.
Update the cgroup selftest to reflect the expectations and error
tolerances of the new implementation.
Also add newly tracked types of memory to the memory.stat side of the
equation, since they're included in memory.current and could throw false
positives.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Reviewed-by: Michal Koutný <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The BPF program for the snprintf selftest runs on all syscall entries.
On busy multicore systems this can cause concurrency issues.
For example it was observed that sometimes the userspace part of the
test reads " 4 0000" instead of " 4 000" (extra '0' at the end)
which seems to happen just before snprintf on another core sets
end[-1] = '\0'.
This patch adds a pid filter to the test to ensure that no
bpf_snprintf() will write over the test's output buffers while the
userspace reads the values.
Fixes: c2e39c6bdc7e ("selftests/bpf: Add a series of tests for bpf_snprintf")
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Florent Revest <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|