aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests
AgeCommit message (Collapse)AuthorFilesLines
2021-03-18selftests: kvm: add set_boot_cpu_id testEmanuele Giuseppe Esposito3-0/+168
Test for the KVM_SET_BOOT_CPU_ID ioctl. Check that it correctly allows to change the BSP vcpu. Signed-off-by: Emanuele Giuseppe Esposito <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18selftests: kvm: add _vm_ioctlEmanuele Giuseppe Esposito2-1/+7
As in kvm_ioctl and _kvm_ioctl, add the respective _vm_ioctl for vm_ioctl. _vm_ioctl invokes an ioctl using the vm fd, leaving the caller to test the result. Signed-off-by: Emanuele Giuseppe Esposito <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18selftests: kvm: add get_msr_index_featuresEmanuele Giuseppe Esposito5-2/+137
Test the KVM_GET_MSR_FEATURE_INDEX_LIST and KVM_GET_MSR_INDEX_LIST ioctls. Signed-off-by: Emanuele Giuseppe Esposito <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18selftest/bpf: Add a test to check trampoline freeing logic.Alexei Starovoitov2-0/+113
Add a selftest for commit e21aa341785c ("bpf: Fix fexit trampoline.") to make sure that attaching fexit prog to a sleeping kernel function will trigger appropriate trampoline and program destruction. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-18selftests: kvm: Add basic Hyper-V clocksources testsVitaly Kuznetsov3-0/+262
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC and TSC page). As a starting point, test the following: 1) Reference TSC is 1Ghz clock. 2) Reference TSC and TSC page give the same reading. 3) TSC page gets updated upon KVM_SET_CLOCK call. 4) TSC page does not get updated when guest opted for reenlightenment. 5) Disabled TSC page doesn't get updated. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> [Add a host-side test using TSC + KVM_GET_MSR too. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18selftests/x86: Add a missing .note.GNU-stack section to thunks_32.SAndy Lutomirski1-0/+2
test_syscall_vdso_32 ended up with an executable stacks because the asm was missing the annotation that says that it is modern and doesn't need an executable stack. Add the annotation. This was missed in commit aeaaf005da1d ("selftests/x86: Add missing .note.GNU-stack sections"). Fixes: aeaaf005da1d ("selftests/x86: Add missing .note.GNU-stack sections") Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/487ed5348a43c031b816fa7e9efedb75dc324299.1614877299.git.luto@kernel.org
2021-03-17selftests/bpf: drop custom NULL #define in skb_pkt_end selftestAndrii Nakryiko1-1/+0
Now that bpftool generates NULL definition as part of vmlinux.h, drop custom NULL definition in skb_pkt_end.c. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2021-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller5-14/+61
Daniel Borkmann says: ==================== pull-request: bpf 2021-03-18 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 4 day(s) which contain a total of 14 files changed, 336 insertions(+), 94 deletions(-). The main changes are: 1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace splat in modify_ftrace_direct() on address change, from Alexei Starovoitov. 2) Fix two oob speculation possibilities that allows unprivileged to leak mem via side-channel, from Piotr Krysiuk and Daniel Borkmann. 3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi. 4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim. 5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-03-17bpf, selftests: Fix up some test_verifier cases for unprivilegedPiotr Krysiuk4-10/+59
Fix up test_verifier error messages for the case where the original error message changed, or for the case where pointer alu errors differ between privileged and unprivileged tests. Also, add alternative tests for keeping coverage of the original verifier rejection error message (fp alu), and newly reject map_ptr += rX where rX == 0 given we now forbid alu on these types for unprivileged. All test_verifier cases pass after the change. The test case fixups were kept separate to ease backporting of core changes. Signed-off-by: Piotr Krysiuk <[email protected]> Co-developed-by: Daniel Borkmann <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-03-17selftests: mlxsw: spectrum-2: Remove q_in_vni_veto testAmit Cohen1-77/+0
q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge can coexist. Remove the test. Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-17selftests: forwarding: Add test for dual VxLAN bridgeAmit Cohen1-0/+366
Configure VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge at the same time in same switch, verify that traffic passed as expected. Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-17selftests/bpf: Use nanosleep() syscall instead of sleep() in get_cgroup_idRavi Bangoria1-1/+5
Glibc's sleep() switched to clock_nanosleep() from nanosleep(), and thus syscalls:sys_enter_nanosleep tracepoint is not hitting which is causing testcase failure. Instead of depending on glibc sleep(), call nanosleep() systemcall directly. Before: # ./get_cgroup_id_user ... main:FAIL:compare_cgroup_id kern cgid 0 user cgid 483 After: # ./get_cgroup_id_user ... main:PASS:compare_cgroup_id Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-16selftests/bpf: Fix warning comparing pointer to 0Jiapeng Chong1-2/+2
Fix the following coccicheck warnings: ./tools/testing/selftests/bpf/progs/fexit_test.c:77:15-16: WARNING comparing pointer to 0. ./tools/testing/selftests/bpf/progs/fexit_test.c:68:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-16selftests: mlxsw: Test egress sampling limitation on Spectrum-1 onlyIdo Schimmel1-1/+3
Make sure egress sampling configuration only fails on Spectrum-1, given that mlxsw now supports it on Spectrum-{2,3}. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-16selftests: mlxsw: Add tc sample tests for new triggersIdo Schimmel1-0/+135
Test that packets are sampled when tc-sample is used with matchall egress binding and flower classifier. Verify that when performing sampling on egress the end-to-end latency is reported as metadata. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-16selftests/net: fix warnings on reuseaddr_ports_exhaustedCarlos Llamas1-16/+16
Fix multiple warnings seen with gcc 10.2.1: reuseaddr_ports_exhausted.c:32:41: warning: missing braces around initializer [-Wmissing-braces] 32 | struct reuse_opts unreusable_opts[12] = { | ^ 33 | {0, 0, 0, 0}, | { } { } Fixes: 7f204a7de8b0 ("selftests: net: Add SO_REUSEADDR test to check if 4-tuples are fully utilized.") Signed-off-by: Carlos Llamas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-16selftests/bpf: Build everything in debug modeAndrii Nakryiko1-2/+5
Build selftests, bpftool, and libbpf in debug mode with DWARF data to facilitate easier debugging. In terms of impact on building and running selftests. Build is actually faster now: BEFORE: make -j60 380.21s user 37.87s system 1466% cpu 28.503 total AFTER: make -j60 345.47s user 37.37s system 1599% cpu 23.939 total test_progs runtime seems to be the same: BEFORE: real 1m5.139s user 0m1.600s sys 0m43.977s AFTER: real 1m3.799s user 0m1.721s sys 0m42.420s Huge difference is being able to debug issues throughout test_progs, bpftool, and libbpf without constantly updating 3 Makefiles by hand (including GDB seeing the source code without any extra incantations). Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-16selftests/bpf: Fix maybe-uninitialized warning in xdpxceiver testAndrii Nakryiko1-2/+2
xsk_ring_prod__reserve() doesn't necessarily set idx in some conditions, so from static analysis point of view compiler is right about the problems like: In file included from xdpxceiver.c:92: xdpxceiver.c: In function ‘xsk_populate_fill_ring’: /data/users/andriin/linux/tools/testing/selftests/bpf/tools/include/bpf/xsk.h:119:20: warning: ‘idx’ may be used uninitialized in this function [-Wmaybe-uninitialized] return &addrs[idx & fill->mask]; ~~~~^~~~~~~~~~~~ xdpxceiver.c:300:6: note: ‘idx’ was declared here u32 idx; ^~~ xdpxceiver.c: In function ‘tx_only’: xdpxceiver.c:596:30: warning: ‘idx’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct xdp_desc *tx_desc = xsk_ring_prod__tx_desc(&xsk->tx, idx + i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix two warnings reported by compiler by pre-initializing variable. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-15bpf: selftests: Remove unused 'nospace_err' in tests for batched ops in ↵Pedro Tammela1-5/+0
array maps This seems to be a reminiscent from the hashmap tests. Signed-off-by: Pedro Tammela <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-15selftests/bpf: Set gopt opt_class to 0 if get tunnel opt failedHangbin Liu1-4/+2
When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4 part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt"), when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error, there is no need to drop the packets and break all geneve rx traffic. Just set opt_class to 0 and keep returning TC_ACT_OK at the end. Fixes: 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt") Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: William Tu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-15bpf: Add getter and setter for SO_REUSEPORT through bpf_{g,s}etsockoptManu Bretelle2-0/+50
Augment the current set of options that are accessible via bpf_{g,s}etsockopt to also support SO_REUSEPORT. Signed-off-by: Manu Bretelle <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-14selftests: mlxsw: Add tc sample testsIdo Schimmel1-0/+492
Test that packets are sampled when tc-sample is used and that reported metadata is correct. Two sets of hosts (with and without LAG) are used, since metadata extraction in mlxsw is a bit different when LAG is involved. # ./tc_sample.sh TEST: tc sample rate (forward) [ OK ] TEST: tc sample rate (local receive) [ OK ] TEST: tc sample maximum rate [ OK ] TEST: tc sample group conflict test [ OK ] TEST: tc sample iif [ OK ] TEST: tc sample lag iif [ OK ] TEST: tc sample oif [ OK ] TEST: tc sample lag oif [ OK ] TEST: tc sample out-tc [ OK ] TEST: tc sample out-tc-occ [ OK ] Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-14selftests: netdevsim: Test psample functionalityIdo Schimmel1-0/+181
Test various aspects of psample functionality over netdevsim and in particular test that the psample module correctly reports the provided metadata. Example: # ./psample.sh TEST: psample enable / disable [ OK ] TEST: psample group number [ OK ] TEST: psample metadata [ OK ] Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: mptcp: Restore packet capture option in join testsMat Martineau1-10/+20
The join self tests previously used the '-c' command line option to enable creation of pcap files for the tests that run, but the change to allow running a subset of the join tests made overlapping use of that option. Restore the capture functionality with '-c' and move the syncookie test option to '-k'. Fixes: 1002b89f23ea ("selftests: mptcp: add command line arguments for mptcp_join.sh") Acked-and-tested-by: Geliang Tang <[email protected]> Co-developed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: mptcp: add testcases for removing addrsGeliang Tang1-0/+23
This patch added the testcases for removing a list of addresses. Used the netlink to flush the addresses in the testcases. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: mptcp: set addr id for removing testcasesGeliang Tang1-14/+24
The removing testcases can only delete the addresses from id 1, this patch added the support for deleting the addresses from any id that user set. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: mptcp: add invert argument for chk_rm_nrGeliang Tang1-5/+16
Some of the removing testcases used two zeros as arguments for chk_rm_nr like this: chk_rm_nr 0 0. This doesn't mean that no RM_ADDR has been sent. It only means that RM_ADDR had been sent in the opposite direction that chk_rm_nr is checking. This patch added a new argument invert for chk_rm_nr to allow it can check the RM_ADDR from the opposite direction. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: netdevsim: Add test for resilient nexthop groups offload APIIdo Schimmel1-0/+620
Test various aspects of the resilient nexthop group offload API on top of the netdevsim implementation. Both good and bad flows are tested. Signed-off-by: Ido Schimmel <[email protected]> Co-developed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: forwarding: Add resilient multipath tunneling nexthop testIdo Schimmel1-0/+361
Add a resilient nexthop objects version of gre_multipath_nh.sh. Test that both IPv4 and IPv6 overlays work with resilient nexthop groups where the nexthops are two GRE tunnels. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: forwarding: Add resilient hashing testIdo Schimmel1-0/+400
Verify that IPv4 and IPv6 multipath forwarding works correctly with resilient nexthop groups and with different weights. Test that when the idle timer is not zero, the resilient groups are not rebalanced - because the nexthop buckets are considered active - and the initial weights (1:1) are used. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: fib_nexthops: Test resilient nexthop groupsIdo Schimmel1-0/+517
Add test cases for resilient nexthop groups. Exhaustive forwarding tests are added separately under net/forwarding/. Examples: # ./fib_nexthops.sh -t basic_res Basic resilient nexthop group functional tests ---------------------------------------------- TEST: Add a nexthop group with default parameters [ OK ] TEST: Get a nexthop group with default parameters [ OK ] TEST: Get a nexthop group with non-default parameters [ OK ] TEST: Add a nexthop group with 0 buckets [ OK ] TEST: Replace nexthop group parameters [ OK ] TEST: Get a nexthop group after replacing parameters [ OK ] TEST: Replace idle timer [ OK ] TEST: Get a nexthop group after replacing idle timer [ OK ] TEST: Replace unbalanced timer [ OK ] TEST: Get a nexthop group after replacing unbalanced timer [ OK ] TEST: Replace with no parameters [ OK ] TEST: Get a nexthop group after replacing no parameters [ OK ] TEST: Replace nexthop group type - implicit [ OK ] TEST: Replace nexthop group type - explicit [ OK ] TEST: Replace number of nexthop buckets [ OK ] TEST: Get a nexthop group after replacing with invalid parameters [ OK ] TEST: Dump all nexthop buckets [ OK ] TEST: Dump all nexthop buckets in a group [ OK ] TEST: Dump all nexthop buckets with a specific nexthop device [ OK ] TEST: Dump all nexthop buckets with a specific nexthop identifier [ OK ] TEST: Dump all nexthop buckets in a non-existent group [ OK ] TEST: Dump all nexthop buckets in a non-resilient group [ OK ] TEST: Dump all nexthop buckets using a non-existent device [ OK ] TEST: Dump all nexthop buckets with invalid 'groups' keyword [ OK ] TEST: Dump all nexthop buckets with invalid 'fdb' keyword [ OK ] TEST: Get a valid nexthop bucket [ OK ] TEST: Get a nexthop bucket with valid group, but invalid index [ OK ] TEST: Get a nexthop bucket from a non-resilient group [ OK ] TEST: Get a nexthop bucket from a non-existent group [ OK ] Tests passed: 29 Tests failed: 0 # ./fib_nexthops.sh -t ipv4_large_res_grp IPv4 large resilient group (128k buckets) ----------------------------------------- TEST: Dump large (x131072) nexthop buckets [ OK ] Tests passed: 1 Tests failed: 0 # ./fib_nexthops.sh -t ipv6_large_res_grp IPv6 large resilient group (128k buckets) ----------------------------------------- TEST: Dump large (x131072) nexthop buckets [ OK ] Tests passed: 1 Tests failed: 0 # ./fib_nexthops.sh -t ipv4_res_torture IPv4 runtime resilient nexthop group torture -------------------------------------------- TEST: IPv4 resilient nexthop group torture test [ OK ] Tests passed: 1 Tests failed: 0 # ./fib_nexthops.sh -t ipv6_res_torture IPv6 runtime resilient nexthop group torture -------------------------------------------- TEST: IPv6 resilient nexthop group torture test [ OK ] Tests passed: 1 Tests failed: 0 # ./fib_nexthops.sh -t ipv4_res_grp_fcnal IPv4 resilient groups functional -------------------------------- TEST: Nexthop group updated when entry is deleted [ OK ] TEST: Nexthop buckets updated when entry is deleted [ OK ] TEST: Nexthop group updated after replace [ OK ] TEST: Nexthop buckets updated after replace [ OK ] TEST: Nexthop group updated when entry is deleted - nECMP [ OK ] TEST: Nexthop buckets updated when entry is deleted - nECMP [ OK ] TEST: Nexthop group updated after replace - nECMP [ OK ] TEST: Nexthop buckets updated after replace - nECMP [ OK ] Tests passed: 8 Tests failed: 0 # ./fib_nexthops.sh -t ipv6_res_grp_fcnal IPv6 resilient groups functional -------------------------------- TEST: Nexthop group updated when entry is deleted [ OK ] TEST: Nexthop buckets updated when entry is deleted [ OK ] TEST: Nexthop group updated after replace [ OK ] TEST: Nexthop buckets updated after replace [ OK ] TEST: Nexthop group updated when entry is deleted - nECMP [ OK ] TEST: Nexthop buckets updated when entry is deleted - nECMP [ OK ] TEST: Nexthop group updated after replace - nECMP [ OK ] TEST: Nexthop buckets updated after replace - nECMP [ OK ] Tests passed: 8 Tests failed: 0 Signed-off-by: Ido Schimmel <[email protected]> Co-developed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: fib_nexthops: List each test case in a different lineIdo Schimmel1-4/+26
The lines with the IPv4 and IPv6 test cases are already very long and more test cases will be added in subsequent patches. List each test case in a different line to make it easier to extend the test with more test cases. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12selftests: fib_nexthops: Declutter test outputIdo Schimmel1-0/+2
Before: # ./fib_nexthops.sh -t ipv4_torture IPv4 runtime torture -------------------- TEST: IPv4 torture test [ OK ] ./fib_nexthops.sh: line 213: 19376 Killed ipv4_del_add_loop1 ./fib_nexthops.sh: line 213: 19377 Killed ipv4_grp_replace_loop ./fib_nexthops.sh: line 213: 19378 Killed ip netns exec me ping -f 172.16.101.1 > /dev/null 2>&1 ./fib_nexthops.sh: line 213: 19380 Killed ip netns exec me ping -f 172.16.101.2 > /dev/null 2>&1 ./fib_nexthops.sh: line 213: 19381 Killed ip netns exec me mausezahn veth1 -B 172.16.101.2 -A 172.16.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" > /dev/null 2>&1 Tests passed: 1 Tests failed: 0 # ./fib_nexthops.sh -t ipv6_torture IPv6 runtime torture -------------------- TEST: IPv6 torture test [ OK ] ./fib_nexthops.sh: line 213: 24453 Killed ipv6_del_add_loop1 ./fib_nexthops.sh: line 213: 24454 Killed ipv6_grp_replace_loop ./fib_nexthops.sh: line 213: 24456 Killed ip netns exec me ping -f 2001:db8:101::1 > /dev/null 2>&1 ./fib_nexthops.sh: line 213: 24457 Killed ip netns exec me ping -f 2001:db8:101::2 > /dev/null 2>&1 ./fib_nexthops.sh: line 213: 24458 Killed ip netns exec me mausezahn -6 veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" > /dev/null 2>&1 Tests passed: 1 Tests failed: 0 After: # ./fib_nexthops.sh -t ipv4_torture IPv4 runtime torture -------------------- TEST: IPv4 torture test [ OK ] Tests passed: 1 Tests failed: 0 # ./fib_nexthops.sh -t ipv6_torture IPv6 runtime torture -------------------- TEST: IPv6 torture test [ OK ] Tests passed: 1 Tests failed: 0 Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-03-12Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "We've got a smattering of changes all over the place which we've acrued since -rc1. To my knowledge, there aren't any pending issues at the moment, but there's still plenty of time for something else to crop up... Summary: - Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing - Fix pfn_valid() not to reject all ZONE_DEVICE memory - Fix memory tagging setup for hotplugged memory regions - Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled - Fix accidental truncation of CPU PMU event counters - Fix error code initialisation when failing probe of DMC620 PMU - Fix return value initialisation for sve-ptrace selftest - Drop broken support for CMDLINE_EXTEND" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe() arm64: mm: remove unused __cpu_uses_extended_idmap[_level()] arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds arm64: perf: Fix 64-bit event counter read truncation arm64/mm: Fix __enable_mmu() for new TGRAN range values kselftest: arm64: Fix exit code of sve-ptrace arm64: mte: Map hotplugged memory as Normal Tagged arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL arm64/mm: Reorganize pfn_valid() arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE arm64: Drop support for CMDLINE_EXTEND arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
2021-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-0/+96
Daniel Borkmann says: ==================== pull-request: bpf 2021-03-10 The following pull-request contains BPF updates for your *net* tree. We've added 8 non-merge commits during the last 5 day(s) which contain a total of 11 files changed, 136 insertions(+), 17 deletions(-). The main changes are: 1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov. 2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting percpu cgroup storage from tracing programs when nested, from Yonghong Song. 3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski. 4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp L3 input length, from Jesper Dangaard Brouer. 5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos. 6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-03-10bpf: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Fix the following coccicheck warning: ./tools/testing/selftests/bpf/progs/fentry_test.c:67:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/1615360714-30381-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-03-10selftests/bpf: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Fix the following coccicheck warning: ./tools/testing/selftests/bpf/progs/test_global_func10.c:17:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/1615357366-97612-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-03-10kselftest: arm64: Fix exit code of sve-ptraceMark Brown1-1/+1
We track if sve-ptrace encountered a failure in a variable but don't actually use that value when we exit the program, do so. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller39-381/+1677
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-09 The following pull-request contains BPF updates for your *net-next* tree. We've added 90 non-merge commits during the last 17 day(s) which contain a total of 114 files changed, 5158 insertions(+), 1288 deletions(-). The main changes are: 1) Faster bpf_redirect_map(), from Björn. 2) skmsg cleanup, from Cong. 3) Support for floating point types in BTF, from Ilya. 4) Documentation for sys_bpf commands, from Joe. 5) Support for sk_lookup in bpf_prog_test_run, form Lorenz. 6) Enable task local storage for tracing programs, from Song. 7) bpf_for_each_map_elem() helper, from Yonghong. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-03-09Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds12-11/+206
Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ...
2021-03-10selftests/bpf: Fix compiler warning in BPF_KPROBE definition in loop6.cAndrii Nakryiko1-2/+2
Add missing return type to BPF_KPROBE definition. Without it, compiler generates the following warning: progs/loop6.c:68:12: warning: type specifier missing, defaults to 'int' [-Wimplicit-int] BPF_KPROBE(trace_virtqueue_add_sgs, void *unused, struct scatterlist **sgs, ^ 1 warning generated. Fixes: 86a35af628e5 ("selftests/bpf: Add a verifier scale test with unknown bounded loop") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-09selftests/bpf: Add BTF_KIND_FLOAT to btf_dump_test_case_syntaxIlya Leoshkevich1-0/+7
Check that dumping various floating-point types produces a valid C code. Suggested-by: Andrii Nakryiko <[email protected]> Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-09selftests/bpf: Add BTF_KIND_FLOAT to test_core_reloc_sizeIlya Leoshkevich4-0/+18
Verify that bpf_core_field_size() is working correctly with floats. Also document the required clang version. Suggested-by: John Fastabend <[email protected]> Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-08torture: Reverse jittering and duration parameters for jitter.shPaul E. McKenney2-4/+4
Remote rcutorture testing requires that jitter.sh continue to be invoked from the generated script for local runs, but that it instead be invoked on the remote system for distributed runs. This argues for common jitterstart and jitterstop scripts. But it would be good for jitterstart and jitterstop to control the name and location of the "jittering" file, while continuing to have the duration controlled by the caller of these new scripts. This commit therefore reverses the order of the jittering and duration parameters for jitter.sh, so that the jittering parameter precedes the duration parameter. Signed-off-by: Paul E. McKenney <[email protected]>
2021-03-08torture: Eliminate jitter_pids filePaul E. McKenney2-18/+1
Now that there is a reliable way to convince the jitter.sh scripts to stop, the jitter_pids file is not needed, nor is the code that kills all the PIDs contained in this file. This commit therefore eliminates this file and the code using it. Signed-off-by: Paul E. McKenney <[email protected]>
2021-03-08torture: Use "jittering" file to control jitter.sh executionPaul E. McKenney2-5/+10
Currently, jitter.sh execution is controlled by a time limit and by the "kill" command. The former allowed jitter.sh to run uselessly past the end of a set of runs that panicked during boot, and the latter is vulnerable to PID reuse. This commit therefore introduces a "jittering" file in the date-stamp directory within "res" that must be present for the jitter.sh scripts to continue executing. The time limit is still in place in order to avoid disturbing runs featuring large trace dumps, but the removal of the "jittering" file handles the panic-during-boot scenario without relying on PIDs. Signed-off-by: Paul E. McKenney <[email protected]>
2021-03-08torture: Use file-based protocol to mark batch's runs completePaul E. McKenney2-2/+14
Currently, the script generated by kvm.sh does a "wait" to wait on both the current batch's guest OSes and any jitter.sh scripts. This works, but makes it hard to abstract the jittering so that common code can be used for both local and distributed runs. This commit therefore uses "build.run" files in scenario directories, and these files are removed after the corresponding scenario's guest OS has completed. Note that --build-only runs do not create build.run files because they also do not create guest OSes and do not run any jitter.sh scripts. Signed-off-by: Paul E. McKenney <[email protected]>
2021-03-08torture: Move build/run synchronization files into scenario directoriesPaul E. McKenney2-19/+16
Currently the bN.ready and bN.wait files are placed in the rcutorture directory, which really is not at all a good place for run-specific files. This commit therefore renames these files to build.ready and build.wait and then moves them into the scenario directories within the "res" directory, for example, into tools/testing/selftests/rcutorture/res/2021.02.10-15.08.23/TINY01. Signed-off-by: Paul E. McKenney <[email protected]>
2021-03-08refscale: Disable verbose torture-test outputPaul E. McKenney1-1/+1
Given large numbers of threads, the quantity of torture-test output is sufficient to sometimes result in RCU CPU stall warnings. The probability of these stall warnings was greatly reduced by batching the output, but the warnings were not eliminated. However, the actual test only depends on console output that is printed even when refscale.verbose=0. This commit therefore causes this test to run with refscale.verbose=0. Signed-off-by: Paul E. McKenney <[email protected]>
2021-03-08rcuscale: Disable verbose torture-test outputPaul E. McKenney1-1/+1
Given large numbers of threads, the quantity of torture-test output is sufficient to sometimes result in RCU CPU stall warnings. The probability of these stall warnings was greatly reduced by batching the output, but the warnings were not eliminated. However, the actual test only depends on console output that is printed even when rcuscale.verbose=0. This commit therefore causes this test to run with rcuscale.verbose=0. Signed-off-by: Paul E. McKenney <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.