| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The macro and facility can be reused in other tests too. Make it general.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Mika Penttilä <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nadav Amit <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Extend it to all types of mem, meanwhile add one parallel test when
EVENT_FORK is enabled, where uffd-wp bits should be persisted rather than
dropped.
Since at it, rename the test to "wp-fork" to better show what it means.
Making the new test called "wp-fork-with-event".
Before:
Testing pagemap on anon... done
After:
Testing wp-fork on anon... done
Testing wp-fork on shmem... done
Testing wp-fork on shmem-private... done
Testing wp-fork on hugetlb... done
Testing wp-fork on hugetlb-private... done
Testing wp-fork-with-event on anon... done
Testing wp-fork-with-event on shmem... done
Testing wp-fork-with-event on shmem-private... done
Testing wp-fork-with-event on hugetlb... done
Testing wp-fork-with-event on hugetlb-private... done
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Mika Penttilä <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nadav Amit <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Namely:
"-f": add a wildcard filter for tests to run
"-l": list tests rather than running any
"-h": help msg
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Mika Penttilä <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nadav Amit <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Test verifier/value_ptr_arith automatically converted to use inline assembly.
Test cases "sanitation: alu with different scalars 2" and
"sanitation: alu with different scalars 3" are updated to
avoid -ENOENT as return value, as __retval() annotation
only supports numeric literals.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/value_illegal_alu automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/unpriv semi-automatically converted to use inline assembly.
The verifier/unpriv.c had to be split in two parts:
- the bulk of the tests is in the progs/verifier_unpriv.c;
- the single test that needs `struct bpf_perf_event_data`
definition is in the progs/verifier_unpriv_perf.c.
The tests above can't be in a single file because:
- first requires inclusion of the filter.h header
(to get access to BPF_ST_MEM macro, inline assembler does
not support this isntruction);
- the second requires vmlinux.h, which contains definitions
conflicting with filter.h.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/subreg automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/spin_lock automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/sock automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/search_pruning automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/runtime_jit automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/regalloc automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/ref_tracking automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/map_ptr_mixing automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/map_in_map automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/lwt automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/loops1 automatically converted to use inline assembly.
There are a few modifications for the converted tests.
"tracepoint" programs do not support test execution, change program
type to "xdp" (which supports test execution) for the following tests
that have __retval tags:
- bounded loop, count to 4
- bonded loop containing forward jump
Also, remove the __retval tag for test:
- bounded loop, count from positive unknown to 4
As it's return value is a random number.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/jeq_infer_not_null automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/direct_packet_access automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/d_path automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/ctx automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/btf_ctx_access automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/bpf_get_stack automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test verifier/bounds automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In order to express test cases that use bpf_tail_call() intrinsic it
is necessary to have several programs to be loaded at a time.
This commit adds __auxiliary annotation to the set of annotations
supported by test_loader.c. Programs marked as auxiliary are always
loaded but are not treated as a separate test.
For example:
void dummy_prog1(void);
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 4);
__uint(key_size, sizeof(int));
__array(values, void (void));
} prog_map SEC(".maps") = {
.values = {
[0] = (void *) &dummy_prog1,
},
};
SEC("tc")
__auxiliary
__naked void dummy_prog1(void) {
asm volatile ("r0 = 42; exit;");
}
SEC("tc")
__description("reference tracking: check reference or tail call")
__success __retval(0)
__naked void check_reference_or_tail_call(void)
{
asm volatile (
"r2 = %[prog_map] ll;"
"r3 = 0;"
"call %[bpf_tail_call];"
"r0 = 0;"
"exit;"
:: __imm(bpf_tail_call),
: __clobber_all);
}
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Extend prog_tests with two test cases:
# ./test_progs --allow=verifier_netfilter_retcode
#278/1 verifier_netfilter_retcode/bpf_exit with invalid return code. test1:OK
#278/2 verifier_netfilter_retcode/bpf_exit with valid return code. test2:OK
#278/3 verifier_netfilter_retcode/bpf_exit with valid return code. test3:OK
#278/4 verifier_netfilter_retcode/bpf_exit with invalid return code. test4:OK
#278 verifier_netfilter_retcode:OK
This checks that only accept and drop (0,1) are permitted.
NF_QUEUE could be implemented later if we can guarantee that attachment
of such programs can be rejected if they get attached to a pf/hook that
doesn't support async reinjection.
NF_STOLEN could be implemented via trusted helpers that can guarantee
that the skb will eventually be free'd.
v4: test case for bpf_nf_ctx access checks, requested by Alexei Starovoitov.
v5: also check ctx->{state,skb} can be dereferenced (Alexei).
# ./test_progs --allow=verifier_netfilter_ctx
#281/1 verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/2 verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/3 verifier_netfilter_ctx/netfilter invalid context access, past end of ctx:OK
#281/4 verifier_netfilter_ctx/netfilter invalid context, write:OK
#281/5 verifier_netfilter_ctx/netfilter valid context read and invalid write:OK
#281/6 verifier_netfilter_ctx/netfilter test prog with skb and state read access:OK
#281/7 verifier_netfilter_ctx/netfilter test prog with skb and state read access @unpriv:OK
#281 verifier_netfilter_ctx:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
This checks:
1/2: partial reads of ctx->{skb,state} are rejected
3. read access past sizeof(ctx) is rejected
4. write to ctx content, e.g. 'ctx->skb = NULL;' is rejected
5. ctx->state content cannot be altered
6. ctx->state and ctx->skb can be dereferenced
7. ... same program fails for unpriv (CAP_NET_ADMIN needed).
Link: https://lore.kernel.org/bpf/20230419021152.sjq4gttphzzy6b5f@dhcp-172-26-102-232.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/[email protected]/
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Make sure we get optlen exported instead of getting EFAULT.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Put the flag MAP_HUGE_2MB in the correct flags argument instead of the
wrong offset argument.
Fixes: 2ddade322925 ("selftests/xsk: Fix munmap for hugepage allocated umem")
Reported-by: Kal Cutter Conley <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When calculating the address of the refcount_t struct within a local
kptr, bpf_refcount_acquire_impl should add refcount_off bytes to the
address of the local kptr. Due to some missing parens, the function is
incorrectly adding sizeof(refcount_t) * refcount_off bytes. This patch
fixes the calculation.
Due to the incorrect calculation, bpf_refcount_acquire_impl was trying
to refcount_inc some memory well past the end of local kptrs, resulting
in kasan and refcount complaints, as reported in [0]. In that thread,
Florian and Eduard discovered that bpf selftests written in the new
style - with __success and an expected __retval, specifically - were
not actually being run. As a result, selftests added in bpf_refcount
series weren't really exercising this behavior, and thus didn't unearth
the bug.
With this fixed behavior it's safe to revert commit 7c4b96c00043
("selftests/bpf: disable program test run for progs/refcounted_kptr.c"),
this patch does so.
[0] https://lore.kernel.org/bpf/[email protected]/
Fixes: 7c50b1cb76ac ("bpf: Add bpf_refcount_acquire kfunc")
Reported-by: Florian Westphal <[email protected]>
Reported-by: Eduard Zingerman <[email protected]>
Signed-off-by: Dave Marchevsky <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
* kvm-arm64/smccc-filtering:
: .
: SMCCC call filtering and forwarding to userspace, courtesy of
: Oliver Upton. From the cover letter:
:
: "The Arm SMCCC is rather prescriptive in regards to the allocation of
: SMCCC function ID ranges. Many of the hypercall ranges have an
: associated specification from Arm (FF-A, PSCI, SDEI, etc.) with some
: room for vendor-specific implementations.
:
: The ever-expanding SMCCC surface leaves a lot of work within KVM for
: providing new features. Furthermore, KVM implements its own
: vendor-specific ABI, with little room for other implementations (like
: Hyper-V, for example). Rather than cramming it all into the kernel we
: should provide a way for userspace to handle hypercalls."
: .
KVM: selftests: Fix spelling mistake "KVM_HYPERCAL_EXIT_SMC" -> "KVM_HYPERCALL_EXIT_SMC"
KVM: arm64: Test that SMC64 arch calls are reserved
KVM: arm64: Prevent userspace from handling SMC64 arch range
KVM: arm64: Expose SMC/HVC width to userspace
KVM: selftests: Add test for SMCCC filter
KVM: selftests: Add a helper for SMCCC calls with SMC instruction
KVM: arm64: Let errors from SMCCC emulation to reach userspace
KVM: arm64: Return NOT_SUPPORTED to guest for unknown PSCI version
KVM: arm64: Introduce support for userspace SMCCC filtering
KVM: arm64: Add support for KVM_EXIT_HYPERCALL
KVM: arm64: Use a maple tree to represent the SMCCC filter
KVM: arm64: Refactor hvc filtering to support different actions
KVM: arm64: Start handling SMCs from EL1
KVM: arm64: Rename SMC/HVC call handler to reflect reality
KVM: arm64: Add vm fd device attribute accessors
KVM: arm64: Add a helper to check if a VM has ran once
KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/selftest/misc-6.4:
: .
: Misc selftest updates for 6.4
:
: - Add comments for recently added ID registers
: .
KVM: selftests: Comment newly defined aarch64 ID registers
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/selftest/lpa:
: .
: Selftest fixes addressing PTE and TTBR0_EL1 encodings for
: 52bit PAs
: .
KVM: selftests: arm64: Fix ttbr0_el1 encoding for PA bits > 48
KVM: selftests: arm64: Fix pte encode/decode for PA bits > 48
KVM: selftests: Fixup config fragment for access_tracking_perf_test
Signed-off-by: Marc Zyngier <[email protected]>
|
|
* kvm-arm64/timer-vm-offsets: (21 commits)
: .
: This series aims at satisfying multiple goals:
:
: - allow a VMM to atomically restore a timer offset for a whole VM
: instead of updating the offset each time a vcpu get its counter
: written
:
: - allow a VMM to save/restore the physical timer context, something
: that we cannot do at the moment due to the lack of offsetting
:
: - provide a framework that is suitable for NV support, where we get
: both global and per timer, per vcpu offsetting, and manage
: interrupts in a less braindead way.
:
: Conflict resolution involves using the new per-vcpu config lock instead
: of the home-grown timer lock.
: .
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: selftests: Augment existing timer test to handle variable offset
KVM: arm64: selftests: Deal with spurious timer interrupts
KVM: arm64: selftests: Add physical timer registers to the sysreg list
KVM: arm64: nv: timers: Support hyp timer emulation
KVM: arm64: nv: timers: Add a per-timer, per-vcpu offset
KVM: arm64: Document KVM_ARM_SET_CNT_OFFSETS and co
KVM: arm64: timers: Abstract the number of valid timers per vcpu
KVM: arm64: timers: Fast-track CNTPCT_EL0 trap handling
KVM: arm64: Elide kern_hyp_va() in VHE-specific parts of the hypervisor
KVM: arm64: timers: Move the timer IRQs into arch_timer_vm_data
KVM: arm64: timers: Abstract per-timer IRQ access
KVM: arm64: timers: Rationalise per-vcpu timer init
KVM: arm64: timers: Allow save/restoring of the physical timer
KVM: arm64: timers: Allow userspace to set the global counter offset
KVM: arm64: Expose {un,}lock_all_vcpus() to the rest of KVM
KVM: arm64: timers: Allow physical offset without CNTPOFF_EL2
KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer
arm64: Add HAS_ECV_CNTPOFF capability
arm64: Add CNTPOFF_EL2 register definition
...
Signed-off-by: Marc Zyngier <[email protected]>
|
|
Add test cases for bridge neighbor suppression, testing both per-port
and per-{Port, VLAN} neighbor suppression with both ARP and NS packets.
Example truncated output:
# ./test_bridge_neigh_suppress.sh
[...]
Tests passed: 148
Tests failed: 0
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The MAC Merge layer (IEEE 802.3-2018 clause 99) does all the heavy
lifting for Frame Preemption (IEEE 802.1Q-2018 clause 6.7.2), a TSN
feature for minimizing latency.
Preemptible traffic is different on the wire from normal traffic in
incompatible ways. If we send a preemptible packet and the link partner
doesn't support preemption, it will drop it as an error frame and we
will never know. The MAC Merge layer has a control plane of its own,
which can be manipulated (using ethtool) in order to negotiate this
capability with the link partner (through LLDP).
Actually the TLV format for LLDP solves this problem only partly,
because both partners only advertise:
- if they support preemption (RX and TX)
- if they have enabled preemption (TX)
so we cannot tell the link partner what to do - we cannot force it to
enable reception of our preemptible packets.
That is fully solved by the verification feature, where the local device
generates some small probe frames which look like preemptible frames
with no useful content, and the link partner is obliged to respond to
them if it supports the standard. If the verification times out, we know
that preemption isn't active in our TX direction on the link.
Having clarified the definition, this selftest exercises the manual
(ethtool) configuration path of 2 link partners (with and without
verification), and the LLDP code path, using the openlldp project.
The test also verifies the TX activity of the MAC Merge layer by
sending traffic through a traffic class configured as preemptible
(using mqprio). There isn't a good way to make this really portable
(user space cannot find out how many traffic classes there are for
a device), but I chose num_tc 4 here, that should work reasonably well.
I also know that some devices (stmmac) only permit TXQ0 to be
preemptible, so this is why PREEMPTIBLE_PRIO was strategically chosen
as 0. Even if other hardware is more configurable, this test should
cover the baseline.
This is not really a "forwarding" selftest, but I put it near the other
"ethtool" selftests.
$ ./ethtool_mm.sh eno0 swp0
TEST: Manual configuration with verification: eno0 to swp0 [ OK ]
TEST: Manual configuration with verification: swp0 to eno0 [ OK ]
TEST: Manual configuration without verification: eno0 to swp0 [ OK ]
TEST: Manual configuration without verification: swp0 to eno0 [ OK ]
TEST: Manual configuration with failed verification: eno0 to swp0 [ OK ]
TEST: Manual configuration with failed verification: swp0 to eno0 [ OK ]
TEST: LLDP [ OK ]
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Counters for the MAC Merge layer and preemptible MAC have standardized
so far on using structured ethtool stats as opposed to the driver
specific names and meanings.
Benefit from that rare opportunity and introduce a helper to lib.sh for
querying standardized counters, in the hope that these will take off for
other uses as well.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mlxsw selftests often invoke a bail_on_lldpad() helper to make sure LLDPAD
is not running, to prevent conflicts between the QoS configuration applied
through TC or DCB command line tool, and the DCB configuration that LLDPAD
might apply. This helper might be useful to others. Move the function to
lib.sh, and parameterize to make reusable in other contexts.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Danielle Ratson <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The driver-specific wrappers of these selftests invoke bail_on_lldpad to
make sure that LLDPAD doesn't trample the configuration. The function
bail_on_lldpad is going to move to lib.sh in the next patch. With that, it
won't be visible for the wrappers before sourcing the framework script. And
after sourcing it, it is too late: the selftest will have run by then.
One option might be to source NUM_NETIFS=0 lib.sh from the wrapper, but
even if that worked (it might, it might not), that seems cumbersome. lib.sh
is doing fair amount of stuff, and even if it works today, it does not look
particularly solid as a solution.
Instead, introduce a hook, sch_tbf_pre_hook(), that when available, gets
invoked. Move the bail to the hook.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Danielle Ratson <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Two test cases:
- "valid read map access into a read-only array 1" and
- "valid read map access into a read-only array 2"
Expect that map_array_ro map is filled with mock data. This logic was
not taken into acount during initial test conversion.
This commit modifies prog_tests/verifier.c entry point for this test
to fill the map.
Fixes: a3c830ae0209 ("selftests/bpf: verifier/array_access.c converted to inline assembly")
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When a test case is annotated with __retval tag the test_loader engine
would use libbpf's bpf_prog_test_run_opts() to do a test run of the
program and compare retvals.
This commit allows to perform arbitrary actions on bpf object right
before test loader invokes bpf_prog_test_run_opts(). This could be
used to setup some state for program execution, e.g. fill some maps.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Florian Westphal found a bug in and suggested a fix for test_loader.c
processing of __retval tag. Because of this bug the function
test_loader.c:do_prog_test_run() never executed and all __retval test
tags were ignored.
If this bug is fixed a number of test cases from
progs/verifier_array_access.c fail with retval not matching the
expected value. This test was recently converted to use test_loader.c
and inline assembly in [1]. When doing the conversion I missed the
important detail of test_verifier.c operation: when it creates
fixup_map_array_ro, fixup_map_array_wo and fixup_map_array_small it
populates these maps with a dummy record.
Disabling the __retval checks for the affected verifier_array_access
in this commit to avoid false-postivies in any potential bisects.
The issue is addressed in the next patch.
I verified that the __retval tags are now respected by changing
expected return values for all tests annotated with __retval, and
checking that these tests started to fail.
[1] https://lore.kernel.org/bpf/[email protected]/
Fixes: 19a8e06f5f91 ("selftests/bpf: Tests execution support for test_loader.c")
Reported-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]/T/
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Florian Westphal found a bug in test_loader.c processing of __retval
tag. Because of this bug the function test_loader.c:do_prog_test_run()
never executed and all __retval test tags were ignored. This hid an
issue with progs/refcounted_kptr.c tests.
When __retval tag bug is fixed and refcounted_kptr.c tests are run
kernel reports various issues and eventually hangs. Shortest reproducer
is the following command run a few times:
$ for i in $(seq 1 4); do (./test_progs --allow=refcounted_kptr &); done
Commenting out __retval tags for these tests until this issue is resolved.
Reported-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]/T/
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add prog test for accessing integer type of variable array in tracing
program.
In addition, hook load_balance function to access sd->span[0], only
to confirm whether the load is successful. Because there is no direct
way to trigger load_balance call.
Co-developed-by: Chengming Zhou <[email protected]>
Signed-off-by: Chengming Zhou <[email protected]>
Signed-off-by: Feng Zhou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Reducing the time taken by dscr_sysfs_test.c allows restoring the
default timeout, which was removed in
commit 850507f30c38 ("selftests/powerpc: Turn off timeout setting for
benchmarks, dscr, signal, tm") because that test took too long.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
This test case is extremely slow, taking around a minute compared to
most of the other DSCR tests taking a second at most. Perf shows most
time is spent by the kernel switching to each CPU it reads in
/sys/devices/system/cpu. This switching is an unavoidable consequnce
of reading all the .../cpuN/dscr values.
Remove the outer iteration loop from this test case, reducing the reads
from 1600 to 16. This still updates the DSCR 16 times and verifies on
every CPU each time, so I do not expect the lower coverage to be
meaningful. The speedup is significant: back down to ~1 second like the
other tests.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The tests currently have a single writer thread updating the system
DSCR with a 1/1000 chance looped only 100 times. So only around one in
10 runs actually do anything.
* Add multiple threads to the dscr_explicit_random_test case.
* Use a barrier to make all the threads start work as simultaneously as
possible.
* Use a rwlock and make all threads have a reasonable chance to write to
the DSCR on each iteration.
PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP is used to prevent
writers from starving while all the other threads keep reading.
Logging the reads/writes shows a decent mix across the whole test.
* Allow all threads a chance to write.
* Make the chance of writing more likely.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Add new cases to the relevant tests that use explicitly synchronized
threads to test the behaviour across context switches with less
randomness. By locking the participants to the same CPU we guarantee a
context switch occurs each time they make progress, which is a likely
failure point if the kernel is not tracking the thread local DSCR
correctly.
The random case is left in to keep exercising potential edge cases.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
All current users of bind_to_cpu() don't care _which_ CPU they get, just
that they are bound to a single free one. So alter the interface to
1. Accept a BIND_CPU_ANY value that tells it to automatically
pick a CPU
2. Return the picked CPU
And convert all these users to bind_to_cpu(BIND_CPU_ANY).
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
This function will be useful in the DSCR test patches later in this
series, so promote it to be shared by all powerpc selftests.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Correct a couple of typos while working on other improvements to the
DSCR tests.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|