aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests
AgeCommit message (Collapse)AuthorFilesLines
2022-05-11selftests: xsk: run all tests for busy-pollMagnus Karlsson4-14/+94
Execute all xsk selftests for busy-poll mode too. Currently they were only run for the standard interrupt driven softirq mode. Replace the unused option queue-id with the new option busy-poll. Signed-off-by: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-11selftests: xsk: do not send zero-length packetsMagnus Karlsson2-9/+10
Do not try to send packets of zero length since they are dropped by veth after commit 726e2c5929de84 ("veth: Ensure eth header is in skb's linear part"). Replace these two packets with packets of length 60 so that they are not dropped. Also clean up the confusing naming. MIN_PKT_SIZE was really MIN_ETH_PKT_SIZE and PKT_SIZE was both MIN_ETH_SIZE and the default packet size called just PKT_SIZE. Make it consistent by using the right define in the right place. Signed-off-by: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-11selftests: xsk: cleanup bash scriptsMagnus Karlsson2-18/+1
Remove the spec-file that is not used any longer from the shell scripts. Also remove an unused option. Signed-off-by: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftest/bpf: The test cases of BPF cookie for fentry/fexit/fmod_ret/lsm.Kui-Feng Lee2-8/+133
Make sure BPF cookies are correct for fentry/fexit/fmod_ret/lsm. Signed-off-by: Kui-Feng Lee <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-10selftests/bpf: Add attach bench testJiri Olsa2-0/+155
Adding test that reads all functions from ftrace available_filter_functions file and attach them all through kprobe_multi API. It also prints stats info with -v option, like on my setup: test_bench_attach: found 48712 functions test_bench_attach: attached in 1.069s test_bench_attach: detached in 0.373s Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftests/bpf: Add bpf link iter testDmitrii Dolgov3-0/+44
Add a simple test for bpf link iterator Signed-off-by: Dmitrii Dolgov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftests/bpf: Use ASSERT_* instead of CHECKDmitrii Dolgov1-154/+88
Replace usage of CHECK with a corresponding ASSERT_* macro for bpf_iter tests. Only done if the final result is equivalent, no changes when replacement means loosing some information, e.g. from formatting string. Signed-off-by: Dmitrii Dolgov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftests/bpf: Fix result check for test_bpf_hash_mapDmitrii Dolgov1-2/+1
The original condition looks like a typo, verify the skeleton loading result instead. Signed-off-by: Dmitrii Dolgov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftests/bpf: Replace bpf_trace_printk in tunnel kernel codeKaixi Fan1-97/+72
Replace bpf_trace_printk with bpf_printk in test_tunnel_kern.c. function bpf_printk is more easier and useful than bpf_trace_printk. Signed-off-by: Kaixi Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftests/bpf: Move vxlan tunnel testcases to test_progsKaixi Fan3-163/+610
Move vxlan tunnel testcases from test_tunnel.sh to test_progs. And add vxlan tunnel source testcases also. Other tunnel testcases will be moved to test_progs step by step in the future. Rename bpf program section name as SEC("tc") because test_progs bpf loader could not load sections with name SEC("gre_set_tunnel"). Because of this, add bpftool to load bpf programs in test_tunnel.sh. Signed-off-by: Kaixi Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-05-10selftests/bpf: Handle batch operations for map-in-map bpf-mapsTakshak Chahande1-0/+252
This patch adds up test cases that handles 4 combinations: a) outer map: BPF_MAP_TYPE_ARRAY_OF_MAPS inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH b) outer map: BPF_MAP_TYPE_HASH_OF_MAPS inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH Signed-off-by: Takshak Chahande <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-09selftests: clarify common error when running gup_testJoel Savitz1-0/+2
The gup_test binary will fail showing only the output of perror("open") in the case that /sys/kernel/debug/gup_test is not found. This will almost always be due to CONFIG_GUP_TEST not being set, which enables compilation of a kernel that provides this file. Add a short error message to clarify this failure and point the user to the solution. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Joel Savitz <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Nico Pache <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-05-09selftests: vm: Makefile: rename TARGETS to VMTARGETSJoel Savitz1-5/+5
The tools/testing/selftests/vm/Makefile uses the variable TARGETS internally to generate a list of platform-specific binary build targets suffixed with _{32,64}. When building the selftests using its own Makefile directly, such as via the following command run in a kernel tree: One receives an error such as the following: make: Entering directory '/root/linux/tools/testing/selftests' make --no-builtin-rules ARCH=x86 -C ../../.. headers_install make[1]: Entering directory '/root/linux' INSTALL ./usr/include make[1]: Leaving directory '/root/linux' make[1]: Entering directory '/root/linux/tools/testing/selftests/vm' make[1]: *** No rule to make target 'vm.c', needed by '/root/linux/tools/testing/selftests/vm/vm_64'. Stop. make[1]: Leaving directory '/root/linux/tools/testing/selftests/vm' make: *** [Makefile:175: all] Error 2 make: Leaving directory '/root/linux/tools/testing/selftests' The TARGETS variable passed to tools/testing/selftests/Makefile collides with the TARGETS used in tools/testing/selftests/vm/Makefile, so rename the latter to VMTARGETS, eliminating the collision with no functional change. Link: https://lkml.kernel.org/r/[email protected] Fixes: f21fda8f6453 ("selftests: vm: pkeys: fix multilib builds for x86") Signed-off-by: Joel Savitz <[email protected]> Acked-by: Nico Pache <[email protected]> Cc: Joel Savitz <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Dave Hansen <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-05-09selftests/bpf: Test libbpf's ringbuf size fix up logicAndrii Nakryiko2-12/+2
Make sure we always excercise libbpf's ringbuf map size adjustment logic by specifying non-zero size that's definitely not a page size multiple. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-09libbpf: Provide barrier() and barrier_var() in bpf_helpers.hAndrii Nakryiko5-8/+0
Add barrier() and barrier_var() macros into bpf_helpers.h to be used by end users. While a bit advanced and specialized instruments, they are sometimes indispensable. Instead of requiring each user to figure out exact asm volatile incantations for themselves, provide them from bpf_helpers.h. Also remove conflicting definitions from selftests. Some tests rely on barrier_var() definition being nothing, those will still work as libbpf does the #ifndef/#endif guarding for barrier() and barrier_var(), allowing users to redefine them, if necessary. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-09selftests/bpf: Add bpf_core_field_offset() testsAndrii Nakryiko4-3/+56
Add test cases for bpf_core_field_offset() helper. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-09selftests/bpf: Use both syntaxes for field-based CO-RE helpersAndrii Nakryiko2-10/+9
Excercise both supported forms of bpf_core_field_exists() and bpf_core_field_size() helpers: variable-based field reference and type/field name-based one. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-09selftests/bpf: Prevent skeleton generation raceAndrii Nakryiko1-5/+5
Prevent "classic" and light skeleton generation rules from stomping on each other's toes due to the use of the same <obj>.linked{1,2,3}.o naming pattern. There is no coordination and synchronizataion between .skel.h and .lskel.h rules, so they can easily overwrite each other's intermediate object files, leading to errors like: /bin/sh: line 1: 170928 Bus error (core dumped) /data/users/andriin/linux/tools/testing/selftests/bpf/tools/sbin/bpftool gen skeleton /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.linked3.o name test_ksyms_weak > /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h make: *** [Makefile:507: /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h] Error 135 make: *** Deleting file '/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h' Fix by using different suffix for light skeleton rule. Fixes: c48e51c8b07a ("bpf: selftests: Add selftests for module kfunc support") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-05-09binderfs: add extended_error feature entryCarlos Llamas1-0/+1
Add extended_error to the binderfs feature list, to help userspace determine whether the BINDER_GET_EXTENDED_ERROR ioctl is supported by the binder driver. Reviewed-by: Christian Brauner (Microsoft) <[email protected]> Acked-by: Todd Kjos <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-05-09selftests/landlock: Normalize array assignmentMickaël Salaün1-56/+56
Add a comma after each array value to make clang-format keep the current array formatting. See the following commit. Automatically modified with: sed -i 's/\t\({}\|NULL\)$/\0,/' tools/testing/selftests/landlock/fs_test.c Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Mickaël Salaün <[email protected]>
2022-05-09selftests/landlock: Add clang-format exceptionsMickaël Salaün3-7/+38
In preparation to a following commit, add clang-format on and clang-format off stanzas around constant definitions and the TEST_F_FORK macro. This enables to keep aligned values, which is much more readable than packed definitions. Add other clang-format exceptions for FIXTURE() and FIXTURE_VARIANT_ADD() declarations to force space before open brace, which is reported by checkpatch.pl . Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Mickaël Salaün <[email protected]>
2022-05-09selftests net: add UDP GRO fraglist + bpf self-testsLina Wang4-0/+403
When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used, check if udp packets and tcp packets are successfully delivered to user space. If wrong udp packets are delivered, udpgso_bench_rx will exit with "Initial byte out of range" Signed-off-by: Maciej enczykowski <[email protected]> Signed-off-by: Lina Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-08selftests: forwarding: Add a tunnel-based test for L3 HW statsPetr Machata2-0/+110
Add a selftest that uses an IPIP topology and tests that L3 HW stats reflect the traffic in the tunnel. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-08selftests: lib: Add a generic helper for obtaining HW statsPetr Machata2-12/+15
The function get_l3_stats() from the test hw_stats_l3.sh will be useful for any test that wishes to work with L3 stats. Furthermore, it is easy to generalize to other HW stats suites (for when such are added). Therefore, move the code to lib.sh, rewrite it to have the same interface as the other stats-collecting functions, and generalize to take the name of the HW stats suite to collect as an argument. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-05selftests: add ping test with ping_group_range tunedNicolas Dichtel1-0/+12
The 'ping' utility is able to manage two kind of sockets (raw or icmp), depending on the sysctl ping_group_range. By default, ping_group_range is set to '1 0', which forces ping to use an ip raw socket. Let's replay the ping tests by allowing 'ping' to use the ip icmp socket. After the previous patch, ipv4 tests results are the same with both kinds of socket. For ipv6, there are a lot a new failures (the previous patch fixes only two cases). Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-05Revert "Merge branch 'mlxsw-line-card-model'"Jakub Kicinski1-61/+0
This reverts commit 5e927a9f4b9f29d78a7c7d66ea717bb5c8bbad8e, reversing changes made to cfc1d91a7d78cf9de25b043d81efcc16966d55b3. The discussion is still ongoing so let's remove the uAPI until the discussion settles. Link: https://lore.kernel.org/all/[email protected]/ Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski27-108/+274
tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-05Merge tag 'net-5.18-rc6' of ↵Linus Torvalds26-103/+269
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, rxrpc and wireguard. Previous releases - regressions: - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter() - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter() - rds: acquire netns refcount on TCP sockets - rxrpc: enable IPv6 checksums on transport socket - nic: hinic: fix bug of wq out of bound access - nic: thunder: don't use pci_irq_vector() in atomic context - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS flag - nic: mlx5e: - lag, fix use-after-free in fib event handler - fix deadlock in sync reset flow Previous releases - always broken: - tcp: fix insufficient TCP source port randomness - can: grcan: grcan_close(): fix deadlock - nfc: reorder destructive operations in to avoid bugs Misc: - wireguard: improve selftests reliability" * tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits) NFC: netlink: fix sleep in atomic bug when firmware download timeout selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer tcp: drop the hash_32() part from the index calculation tcp: increase source port perturb table to 2^16 tcp: dynamically allocate the perturb table used by source ports tcp: add small random increments to the source port tcp: resalt the secret every 10 seconds tcp: use different parts of the port_offset for index and offset secure_seq: use the 64 bits of the siphash for port offset calculation wireguard: selftests: set panic_on_warn=1 from cmdline wireguard: selftests: bump package deps wireguard: selftests: restore support for ccache wireguard: selftests: use newer toolchains to fill out architectures wireguard: selftests: limit parallelism to $(nproc) tests at once wireguard: selftests: make routing loop test non-fatal net/mlx5: Fix matching on inner TTC net/mlx5: Avoid double clear or set of sync reset requested net/mlx5: Fix deadlock in sync reset flow net/mlx5e: Fix trust state reset in reload net/mlx5e: Avoid checking offload capability in post_parse action ...
2022-05-05Merge tag 'v5.18-rc4' into nextMichael Ellerman22-157/+420
Merge master into next, to bring in commit 5f24d5a579d1 ("mm, hugetlb: allow for "high" userspace addresses"), which is needed as a prerequisite for the series converting powerpc to the generic mmap logic.
2022-05-04selftests: ocelot: tc_flower_chains: specify conform-exceed action for policerVladimir Oltean1-1/+1
As discussed here with Ido Schimmel: https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/ the default conform-exceed action is "reclassify", for a reason we don't really understand. The point is that hardware can't offload that police action, so not specifying "conform-exceed" was always wrong, even though the command used to work in hardware (but not in software) until the kernel started adding validation for it. Fix the command used by the selftest by making the policer drop on exceed, and pass the packet to the next action (goto) on conform. Fixes: 8cd6b020b644 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: set panic_on_warn=1 from cmdlineJason A. Donenfeld18-23/+17
Rather than setting this once init is running, set panic_on_warn from the kernel command line, so that it catches splats from WireGuard initialization code and the various crypto selftests. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: bump package depsJason A. Donenfeld1-9/+9
Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: restore support for ccacheJason A. Donenfeld2-1/+18
When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: use newer toolchains to fill out architecturesJason A. Donenfeld9-63/+169
Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: limit parallelism to $(nproc) tests at onceJason A. Donenfeld1-10/+10
The parallel tests were added to catch queueing issues from multiple cores. But what happens in reality when testing tons of processes is that these separate threads wind up fighting with the scheduler, and we wind up with contention in places we don't care about that decrease the chances of hitting a bug. So just do a test with the number of CPU cores, rather than trying to scale up arbitrarily. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: make routing loop test non-fatalJason A. Donenfeld1-1/+13
I hate to do this, but I still do not have a good solution to actually fix this bug across architectures. So just disable it for now, so that the CI can still deliver actionable results. This commit adds a large red warning, so that at least the failure isn't lost forever, and hopefully this can be revisited down the line. Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/[email protected]/ Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/ Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04selftests/seccomp: Fix spelling mistake "Coud" -> "Could"Colin Ian King1-1/+1
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-04selftests: router.sh: Add a diagramPetr Machata1-0/+18
It is customary for selftests to have a comment with a topology diagram, which serves to illustrate the situation in which the test is done. This selftest lacks it. Add it. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: router_vid_1: Add a diagram, fix coding stylePetr Machata1-1/+26
It is customary for selftests to have a comment with a topology diagram, which serves to illustrate the situation in which the test is done. This selftest lacks it. Add it. While at it, fix the list of tests so that the test names are enumerated one at a line. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mlxsw: bail_on_lldpad before installing the cleanup trapPetr Machata4-10/+8
A number of mlxsw-specific QoS tests use manual QoS DCB management. As such, they need to make sure lldpad is not running, because it would override the configuration the test has applied using other tools. To that end, these selftests invoke the bail_on_lldpad() helper, which terminates the selftest if th lldpad is running. Some of these tests however first install the bash exit trap, which invokes a cleanup() at the test exit. If bail_on_lldpad() has terminated the script even before the setup part was run, the cleanup part will be very confused. Therefore make sure bail_on_lldpad() is invoked before the cleanup is registered. While there are still edge cases where the user terminates the script before the setup was fully done, this takes care of a common situation where the cleanup would be invoked in an inconsistent state. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: functional tests for the userspace PM typeKishen Maloor1-0/+779
This change adds a selftest script that performs a comprehensive behavioral/functional test of all userspace PM capabilities by exercising all the newly added APIs and changes to support said capabilities. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: create listeners to receive MPJsKishen Maloor1-0/+54
This change updates the "pm_nl_ctl" testing sample with a "listen" option to bind a MPTCP listening socket to the provided addr+port. This option is exercised in testing subflow initiation scenarios in conjunction with userspace path managers where the MPTCP application does not hold an active listener to accept requests for new subflows. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: capture netlink eventsKishen Maloor1-7/+157
This change adds to self-testing support for the MPTCP netlink interface by capturing various MPTCP netlink events (and all their metadata) associated with connections, subflows and address announcements. It is used in self-testing scripts that exercise MPTCP netlink commands to precisely validate those operations by examining the dispatched MPTCP netlink events in response to those commands. Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROYKishen Maloor1-0/+115
This change updates the "pm_nl_ctl" testing sample with a "dsf" (destroy subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection. E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATEKishen Maloor1-0/+129
This change updates the "pm_nl_ctl" testing sample with a "csf" (create subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection. E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_REMOVEKishen Maloor1-0/+52
This change updates the "pm_nl_ctl" testing sample with a "rem" (remove) option to support the newly added netlink interface command MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the chosen MPTCP connection. E.g. ./pm_nl_ctl rem token 823274047 id 23 Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCEKishen Maloor1-0/+131
This change updates the "pm_nl_ctl" testing sample with an "ann" (announce) option to support the newly added netlink interface command MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the chosen MPTCP connection. E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0 Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Kishen Maloor <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-04selftests/powerpc: Fix typo in spectre_v2Russell Currey1-1/+1
Signed-off-by: Russell Currey <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-04kselftest/arm64: Fix ABI header directory locationMark Brown1-10/+1
Currently the arm64 kselftests attempt to locate the ABI headers using custom logic which doesn't work correctly in the case of out of tree builds if KBUILD_OUTPUT is not specified. Since lib.mk defines KHDR_INCLUDES with the appropriate flags we can simply remove the custom logic and use that instead. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-05-04selftests: KVM: Test SYSTEM_SUSPEND PSCI callOliver Upton1-0/+69
Assert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if the guest calls PSCI SYSTEM_SUSPEND. Additionally, guarantee that the SMC32 and SMC64 flavors of this call are discoverable with the PSCI_FEATURES call. Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.