| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we have the ability to handle MSRs from user space and also to
select which ones we do want to prevent in-kernel KVM code from handling,
let's add a selftest to show case and verify the API.
Signed-off-by: Alexander Graf <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rename SECONDARY_EXEC_RDTSCP to SECONDARY_EXEC_ENABLE_RDTSCP in
preparation for consolidating the logic for adjusting secondary exec
controls based on the guest CPUID model.
No functional change intended.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The "ethtool" debugfs directory holds per-netdev knobs, so move
it from the device instance directory to the port directory.
This fixes the following warning when creating multiple ports:
debugfs: Directory 'ethtool' with parent 'netdevsim1' already present!
Fixes: ff1f7c17fb20 ("netdevsim: add pause frame stats")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The devlink interface recently gained support for a new "overwrite mask"
parameter that allows specifying how various sub-sections of a flash
component are modified when updating.
Add support for this to netdevsim, to enable easily testing the
interface. Make the allowed overwrite mask values controllable via
a debugfs parameter. This enables testing a flow where the driver
rejects an unsupportable overwrite mask.
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The devlink core recently gained support for checking whether the driver
supports a flash_update parameter, via `supported_flash_update_params`.
However, parameters are specified as function arguments. Adding a new
parameter still requires modifying the signature of the .flash_update
callback in all drivers.
Convert the .flash_update function to take a new `struct
devlink_flash_update_params` instead. By using this structure, and the
`supported_flash_update_params` bit field, a new parameter to
flash_update can be added without requiring modification to existing
drivers.
As before, all parameters except file_name will require driver opt-in.
Because file_name is a necessary field to for the flash_update to make
sense, no "SUPPORTED" bitflag is provided and it is always considered
valid. All future additional parameters will require a new bit in the
supported_flash_update_params bitfield.
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Michael Chan <[email protected]>
Cc: Bin Luo <[email protected]>
Cc: Saeed Mahameed <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: Danielle Ratson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
|
|
If we AND two values together that are known in the 32bit subregs, but not
known in the 64bit registers we rely on the tnum value to report the 32bit
subreg is known. And do not use mark_reg_known() directly from
scalar32_min_max_and()
Add an AND test to cover the case with known 32bit subreg, but unknown
64bit reg.
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch attaches a classifier prog to the ingress filter.
It exercises the following helpers with different socket pointer
types in different logical branches:
1. bpf_sk_release()
2. bpf_sk_assign()
3. bpf_skc_to_tcp_request_sock(), bpf_skc_to_tcp_sock()
4. bpf_tcp_gen_syncookie, bpf_tcp_check_syncookie
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The enum tcp_ca_state is available in <linux/tcp.h>.
Remove it from the bpf_tcp_helpers.h to avoid conflict when the bpf prog
needs to include both both <linux/tcp.h> and bpf_tcp_helpers.h.
Modify the bpf_cubic.c and bpf_dctcp.c to use <linux/tcp.h> instead.
The <linux/stddef.h> is needed by <linux/tcp.h>.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This test uses bpf_skc_to_tcp_sock() to get a kernel tcp_sock ptr "ktp".
Access the ktp->lsndtime and also pass ktp to bpf_sk_storage_get().
It also exercises the bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id()
with the "ktp". To do that, a parent cgroup and a child cgroup are
created. The bpf prog is attached to the child cgroup.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch uses start_server() and connect_to_fd() from network_helpers.h
to remove the network testing boiler plate codes. epoll is no longer
needed also since the timeout has already been taken care of also.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
skel is used.
Global variables are used to store the result from bpf prog.
addr_map, sock_result_map, and tcp_sock_result_map are gone.
Instead, global variables listen_tp, srv_sa6, cli_tp,, srv_tp,
listen_sk, srv_sk, and cli_sk are added.
Because of that, bpf_addr_array_idx and bpf_result_array_idx are also
no longer needed.
CHECK() macro from test_progs.h is reused and bail as soon as
a CHECK failure.
shutdown() is used to ensure the previous data-ack is received.
The bytes_acked, bytes_received, and the pkt_out_cnt checks are
using "<" to accommodate the final ack may not have been received/sent.
It is enough since it is not the focus of this test.
The sk local storage is all initialized to 0xeB9F now, so the
check_sk_pkt_out_cnt() always checks with the 0xeB9F base. It is to
keep things simple.
The next patch will reuse helpers from network_helpers.h to simplify
things further.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This is a mechanical change to
1. move test_sock_fields.c to prog_tests/sock_fields.c
2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c
Minimal change is made to the code itself. Next patch will make
changes to use new ways of writing test, e.g. use skel and global
variables.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The patch tests for:
1. bpf_sk_release() can be called on a tcp_sock btf_id ptr.
2. Ensure the tcp_sock btf_id pointer cannot be used
after bpf_sk_release().
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Based on Google-internal RSEQ work done by Paul Turner and Andrew
Hunter.
This patch adds a selftest for MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ.
The test quite often fails without the previous patch in this
patchset, but consistently passes with it.
Signed-off-by: Peter Oskolkov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Mathieu Desnoyers <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
This patch adds rseq_offset_deref_addv() function to
tools/testing/selftests/rseq/rseq-x86.h, to be used in a selftest in
the next patch in the patchset.
Once an architecture adds support for this function they should define
"RSEQ_ARCH_HAS_OFFSET_DEREF_ADDV".
Signed-off-by: Peter Oskolkov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Mathieu Desnoyers <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
This patch added the remove addr and subflow test cases and two new
functions.
The first function run_remove_tests calls do_transfer with two new
arguments, rm_nr_ns1 and rm_nr_ns2, for the numbers of addresses should be
removed during the transfer process in namespace 1 and namespace 2.
If both these two arguments are 0, we do the join test cases with
"mptcp_connect -j" command. Otherwise, do the remove test cases with
"mptcp_connect -r" command.
The second function chk_rm_nr checks the RM_ADDR related mibs's counters.
The output of the test cases looks like this:
11 remove single subflow syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - sf [ ok ]
12 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - sf [ ok ]
13 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - sf [ ok ]
14 remove subflow and signal syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - sf [ ok ]
15 remove subflows and signal syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - sf [ ok ]
Suggested-by: Matthieu Baerts <[email protected]>
Suggested-by: Paolo Abeni <[email protected]>
Suggested-by: Mat Martineau <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch added a new cfg, named cfg_remove in mptcp_connect. This new
cfg_remove is copied from cfg_join. The only difference between them is in
the do_rnd_write function. Here we slow down the transfer process of all
data to let the RM_ADDR suboption can be sent and received completely.
Otherwise the remove address and subflow test cases don't work.
Suggested-by: Matthieu Baerts <[email protected]>
Suggested-by: Paolo Abeni <[email protected]>
Suggested-by: Mat Martineau <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch added the ADD_ADDR related mibs counter check function
chk_add_nr(). This function check both ADD_ADDR and ADD_ADDR with
echo flag.
The output looks like this:
07 unused signal address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
08 signal address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
09 subflow and signal syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
10 multiple subflows and signal syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
11 remove subflow and signal syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It's an exhaustive testing for ipsec: covering all encryption/
authentication/compression algorithms. The tests are run in two
network namespaces, connected by veth interfaces. To make exhaustive
testing less time-consuming, the tests are run in parallel tasks,
specified by parameter to the selftest.
As the patches set adds support for xfrm in compatible tasks, there are
tests to check structures that differ in size between 64-bit and 32-bit
applications.
The selftest doesn't use libnl so that it can be easily compiled as
compatible application and don't require compatible .so.
Here is a diagram of the selftest:
---------------
| selftest |
| (parent) |
---------------
| |
| (pipe) |
----------
/ | | \
/------------- / \ -------------\
| /----- -----\ |
---------|----------|----------------|----------|---------
| --------- --------- --------- --------- |
| | child | | child | NS A | child | | child | |
| --------- --------- --------- --------- |
-------|------------|----------------|-------------|------
veth0 veth1 veth2 vethN
---------|------------|----------------|-------------|----------
| ------------ ------------ ------------ ------------ |
| | gr.child | | gr.child | NS B | gr.child | | gr.child | |
| ------------ ------------ ------------ ------------ |
----------------------------------------------------------------
The parent sends the description of a test (xfrm parameters) to the
child, the child and grand child setup a tunnel over veth interface and
test it by sending udp packets.
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Prevent them from polluting git status after building selftests.
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This is a follow-up patch to fix an issue left in commit:
98b0bf02738004829d7e26d6cb47b2e469aaba86
selftests: kvm: Use a shorter encoding to clear RAX
With the change in the commit, we also need to modify "xor" instruction
length from 3 to 2 in array ss_size accordingly to pass below check:
for (i = 0; i < (sizeof(ss_size) / sizeof(ss_size[0])); i++) {
target_rip += ss_size[i];
CLEAR_DEBUG();
debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP;
debug.arch.debugreg[7] = 0x00000400;
APPLY_DEBUG();
vcpu_run(vm, VCPU_ID);
TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG &&
run->debug.arch.exception == DB_VECTOR &&
run->debug.arch.pc == target_rip &&
run->debug.arch.dr6 == target_dr6,
"SINGLE_STEP[%d]: exit %d exception %d rip 0x%llx "
"(should be 0x%llx) dr6 0x%llx (should be 0x%llx)",
i, run->exit_reason, run->debug.arch.exception,
run->debug.arch.pc, target_rip, run->debug.arch.dr6,
target_dr6);
}
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Yang Weijiang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
|
|
Add kprobe %return suffix testcase and syntax error tests
for %return suffix.
Link: https://lkml.kernel.org/r/159972817653.428528.9180599115849301184.stgit@devnote2
Acked-by: Shuah Khan <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
cnt was not used in nft_meta.sh
This patch also fixes 2 shellcheck SC2181 warnings:
"check exit code directly with e.g. 'if mycmd;', not indirectly with
$?."
Signed-off-by: Fabian Frederick <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
When some test directly done with check_one_counter() fails,
counter variable is undefined. This patch calls ip with cname
which avoids errors like:
FAIL: oskuidcounter, want "packets 2", got
Error: syntax error, unexpected newline, expecting string
list counter inet filter
^
Error is now correctly rendered:
FAIL: oskuidcounter, want "packets 2", got
table inet filter {
counter oskuidcounter {
packets 1 bytes 84
}
}
Signed-off-by: Fabian Frederick <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
run task on first CPU with netfilter counters reset and check
cpu meta after another ping
Signed-off-by: Fabian Frederick <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Some kernels builds might inline vfs_getattr call within fstat
syscall code path, so fentry/vfs_getattr trampoline is not called.
Add security_inode_getattr to allowlist and switch the d_path test stat
trampoline to security_inode_getattr.
Keeping dentry_open and filp_close, because they are in their own
files, so unlikely to be inlined, but in case they are, adding
security_file_open.
Adding flags that indicate trampolines were called and failing
the test if any of them got missed, so it's easier to identify
the issue next time.
Fixes: e4d1af4b16f8 ("selftests/bpf: Add test for d_path helper")
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The displayed size is in bytes while the text says it is in kB.
Shift it by 10 to really display kBytes.
Fixes: fa7b9a805c79 ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/e27481224564a93d14106e750de31189deaa8bc8.1598861977.git.christophe.leroy@csgroup.eu
Signed-off-by: Linus Torvalds <[email protected]>
|
|
On powerpc, the errno is not inverted, and depends on ccr.so being
set. Add this to a powerpc definition of SYSCALL_RET_SET().
Co-developed-by: Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Link: https://lore.kernel.org/linux-kselftest/[email protected]/
Fixes: 5d83c2b37d43 ("selftests/seccomp: Add powerpc support")
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Reviewed-by: Michael Ellerman <[email protected]>
|
|
Instead of special-casing the specific case of shared registers, create
a default SYSCALL_RET_SET() macro (mirroring SYSCALL_NUM_SET()), that
writes to the SYSCALL_RET register. For architectures that can't set the
return value (for whatever reason), they can define SYSCALL_RET_SET()
without an associated SYSCALL_RET() macro. This also paves the way for
architectures that need to do special things to set the return value
(e.g. powerpc).
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
When none of the registers have changed, don't flush them back. This can
happen if the architecture uses a non-register way to change the syscall
(e.g. arm64) , and a return value hasn't been written.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
Consolidate the REGSET logic into the new ARCH_GETREG() and
ARCH_SETREG() macros, avoiding more #ifdef code in function bodies.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
Instead of special-casing the get/set-registers routines, move the
HAVE_GETREG logic into the new ARCH_GETREG() and ARCH_SETREG() macros.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
With all architectures now using the common SYSCALL_NUM_SET() macro, the
arch-specific #ifdef can be removed from change_syscall() itself.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
Instead of having the mips O32 macro special-cased, pull the logic into
the SYSCALL_NUM() macro. Additionally include the ABI headers, since
these appear to have been missing, leaving __NR_O32_Linux undefined.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
Remove the arm64 special-case in change_syscall().
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
Remove the arm special-case in change_syscall().
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
Remove the mips special-case in change_syscall().
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
In order to avoid "#ifdef"s in the main function bodies, create a new
macro, SYSCALL_NUM_SET(), where arch-specific logic can live.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
To avoid an xtensa special-case, refactor all arch register macros to
take the register variable instead of depending on the macro expanding
as a struct member name.
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
The __NR_mknod syscall doesn't exist on arm64 (only __NR_mknodat).
Switch to the modern syscall.
Fixes: ad5682184a81 ("selftests/seccomp: Check for EPOLLHUP for user_notif")
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Acked-by: Christian Brauner <[email protected]>
|
|
getsetsockopt() calls getsockopt() with optlen == 1, but then checks
the resulting int. It is ok on little endian, but not on big endian.
Fix by checking char instead.
Fixes: 8a027dc0d8f5 ("selftests/bpf: add sockopt test that exercises sk helpers")
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
server_map's value size is 8, but the test tries to put an int there.
This sort of works on x86 (unless followed by non-0), but hard fails on
s390.
Fix by using __s64 instead of int.
Fixes: 2d7824ffd25c ("selftests: bpf: Add test for sk_assign")
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
|
|
Integrate the FP tests with the build system and add some documentation
for the ones run outside the kselftest infrastructure. The content in
the README was largely written by Dave Martin with edits by me.
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Dave Martin <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add wrapper scripts which invoke fpsimd-test and sve-test with several
copies per CPU such that the context switch code will be appropriately
exercised.
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Dave Martin <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
vlset is a small utility for use in conjunction with tests like the sve-test
stress test which allows another executable to be invoked with a configured
SVE vector length.
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Dave Martin <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|