| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some features may invalidate some tests, for example by supporting an
operation which would trap otherwise. Allow tests to list features that
they are incompatible with so we can cover the case where a signal will
be generated without disruption on systems where that won't happen.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
On a VM with PMU disabled via KVM_CAP_PMU_CONFIG, the PMU should not be
usable by the guest.
Signed-off-by: David Dunn <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Carve out portion of vm_create_default so that selftests can modify
a "default" VM prior to creating vcpus.
Signed-off-by: David Dunn <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The arch_timer and vgic_irq kselftests assume that they can create a
vgic-v3, using the library function vgic_v3_setup() which aborts with a
test failure if it is not possible to do so. Since vgic-v3 can only be
instantiated on systems where the host has GICv3 this leads to false
positives on older systems where that is not the case.
Fix this by changing vgic_v3_setup() to return an error if the vgic can't
be instantiated and have the callers skip if this happens. We could also
exit flagging a skip in vgic_v3_setup() but this would prevent future test
cases conditionally deciding which GIC to use or generally doing more
complex output.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Tested-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests")
the mptcp selftests leave behind a couple of tmp files after
each run. run_tests_disconnect() misnames a few variables used to
track them. Address the issue setting the appropriate global variables
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
tools/testing/selftests/net/mptcp/mptcp_join.sh
34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
857898eb4b28 ("selftests: mptcp: add missing join check")
6ef84b1517e0 ("selftests: mptcp: more robust signal race test")
https://lore.kernel.org/all/[email protected]/
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c
fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions")
c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information")
09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr")
84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr")
efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow")
3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
|
|
UBSAN_BOUNDS and UBSAN_TRAP depend on UBSAN config option.
merge_config.sh script generates following warnings if parent config
doesn't have UBSAN config already enabled and UBSAN_BOUNDS/UBSAN_TRAP
config options don't get added to the parent config.
Value requested for CONFIG_UBSAN_BOUNDS not in final .config
Requested value: CONFIG_UBSAN_BOUNDS=y
Actual value:
Value requested for CONFIG_UBSAN_TRAP not in final .config
Requested value: CONFIG_UBSAN_TRAP=y
Actual value:
Fix this by including UBSAN config.
Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests")
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
CONFIG_HARDENED_USERCOPY_FALLBACK config option has been removed in
commit 53944f171a89 ("mm: remove HARDENED_USERCOPY_FALLBACK"). Remove it
from the lkdtm selftest config.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Rename file for readability purpose. Update its usage and references.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Selftests need kernel headers and glibc for compilation. In compilation
of selftests, uapi headers from kernel source are used instead of
default ones while glibc has already been compiled with different header
files installed in the operating system. So there can be redefination
warnings from compiler. These warnings can be suppressed by using
-isystem to include the uapi headers.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The defination of swap() is used from kernel's internal header when this
test is built in source tree. The build fails when this test is built
out of source tree as defination of swap() isn't found. Selftests
shouldn't depend on kernel's internal header files. They can only depend
on uapi header files. Add the defination of swap() to fix the build
error:
gcc -Wall -I/linux_mainline2/build/usr/include -no-pie userfaultfd.c -lrt -lpthread -o /linux_mainline2/build/kselftest/vm/userfaultfd
userfaultfd.c: In function ‘userfaultfd_stress’:
userfaultfd.c:1530:3: warning: implicit declaration of function ‘swap’; did you mean ‘swab’? [-Wimplicit-function-declaration]
1530 | swap(area_src, area_dst);
| ^~~~
| swab
/usr/bin/ld: /tmp/cclUUH7V.o: in function `userfaultfd_stress':
userfaultfd.c:(.text+0x4d64): undefined reference to `swap'
/usr/bin/ld: userfaultfd.c:(.text+0x4d82): undefined reference to `swap'
collect2: error: ld returned 1 exit status
Fixes: 2c769ed7137a ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner")
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Acked-by: Paolo Bonzini <[email protected]>
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Tested-by: Alistair Popple <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add the KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Mickaël Salaün <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. Add KHDR_INCLUDES to correctly reach the
headers.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Out of tree build of this test fails if relative path of the output
directory is specified. KBUILD_OUTPUT also doesn't point to the correct
directory when relative path is used. Thus out of tree builds fail.
Remove the un-needed include paths and use KHDR_INCLUDES to correctly
reach the headers.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
uapi headers should be installed at the top of the object tree,
"<obj_tree>/usr/include". There is no need for kernel headers to
be present at kselftest build directory, "<obj_tree>/kselftest/usr/
include" as well. This duplication can be avoided by correctly
specifying the INSTALL_HDR_PATH.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Kernel uapi headers can be present at different paths depending upon
how the build was invoked. It becomes impossible for the tests to
include the correct headers directory. Set and export KHDR_INCLUDES
variable to make it possible for sub make files to include the header
files.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa'
gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test
/usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
If only futex selftest is compiled, uapi header files are copied to the
selftests/futex/functional directory. This copy isn't needed. Set the
DEFAULT_INSTALL_HDR_PATH variable to 1 to use the default header install
path only. This removes extra copy of header file.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Some testcases allow for optional commandline parameters but as of now
there is now way to provide such arguments to the runner script.
Add support to retrieve such optional command parameters fron environment
variables named so as to include the all-uppercase test executable name,
sanitized substituting any non-acceptable varname characters with "_",
following the pattern:
KSELFTEST_<UPPERCASE_SANITIZED_TEST_NAME>_ARGS="options"
Optional command parameters support is not available if 'tr' is not
installed on the test system.
Cc: Kees Cook <[email protected]>
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
livepatch has a set of selftests that are used to validate the behavior of
the livepatching subsystem. One of the testcases in the livepatch
testsuite is test-ftrace.sh, which among other things, validates that
livepatching gracefully fails when ftrace is disabled. In the event that
ftrace cannot be disabled using 'sysctl kernel.ftrace_enabled=0', the test
will fail later due to it unexpectedly successfully loading the
test_klp_livepatch module.
While the livepatch selftests are careful to remove any of the livepatch
test modules between testcases to avoid this situation, ftrace may still
fail to be disabled if another trace is active on the system that was
enabled with FTRACE_OPS_FL_PERMANENT. For example, any active BPF programs
that use trampolines will cause this test to fail due to the trampoline
being implemented with register_ftrace_direct(). The following is an
example of such a trace:
tcp_drop (1) R I D tramp: ftrace_regs_caller+0x0/0x58
(call_direct_funcs+0x0/0x30)
direct-->bpf_trampoline_6442550536_0+0x0/0x1000
In order to make the test more resilient to system state that is out of its
control, this patch updates set_ftrace_enabled() to detect sysctl failures,
and skip the testrun when appropriate.
Suggested-by: Petr Mladek <[email protected]>
Signed-off-by: David Vernet <[email protected]>
Acked-by: Miroslav Benes <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Tested-by: Petr Mladek <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
These tests check that the basic locked port feature works, so that
no 'host' can communicate (ping) through a locked port unless the
MAC address of the 'host' interface is in the forwarding database of
the bridge.
Signed-off-by: Hans Schultz <[email protected]>
Acked-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add option to shift the clock by a specified number of nanoseconds.
The new argument -n will specify the number of nanoseconds to add to the
ptp clock. Since the API doesn't support negative shifts those needs to
be calculated by subtracting full seconds and adding a nanosecond offset.
Signed-off-by: Maciek Machnikowski <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Changes for 5.18 part1
- add Claudio as Maintainer
- first step to do proper storage key checking
- testcase for missing memop check
|
|
This test tries to pass a PTR_TO_BTF_ID_OR_NULL to the release function,
which would trigger a out of bounds access without the fix in commit
45ce4b4f9009 ("bpf: Fix crash due to out of bounds access into reg2btf_ids.")
but after the fix, it should only index using base_type(reg->type),
which should be less than __BPF_REG_TYPE_MAX, and also not permit any
type flags to be set for the reg->type.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Test that resolved neighbours for IPv4 broadcast addresses are
unaffected by the configuration of matching broadcast routes, whereas
unresolved neighbours are invalidated.
Without previous patch:
# ./fib_tests.sh -t ipv4_bcast_neigh
IPv4 broadcast neighbour tests
TEST: Resolved neighbour for broadcast address [ OK ]
TEST: Resolved neighbour for network broadcast address [ OK ]
TEST: Unresolved neighbour for broadcast address [FAIL]
TEST: Unresolved neighbour for network broadcast address [FAIL]
Tests passed: 2
Tests failed: 2
With previous patch:
# ./fib_tests.sh -t ipv4_bcast_neigh
IPv4 broadcast neighbour tests
TEST: Resolved neighbour for broadcast address [ OK ]
TEST: Resolved neighbour for network broadcast address [ OK ]
TEST: Unresolved neighbour for broadcast address [ OK ]
TEST: Unresolved neighbour for network broadcast address [ OK ]
Tests passed: 4
Tests failed: 0
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0cb ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c6804f ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
|
|
There turned out to be a few problems with btfgen selftests.
First, core_btfgen tests are failing in BPF CI due to the use of
full-featured bpftool, which has extra dependencies on libbfd, libcap,
etc, which are present in BPF CI's build environment, but those shared
libraries are missing in QEMU image in which test_progs is running.
To fix this problem, use minimal bootstrap version of bpftool instead.
It only depend on libelf and libz, same as libbpf, so doesn't add any
new requirements (and bootstrap bpftool still implementes entire
`bpftool gen` functionality, which is quite convenient).
Second problem is even more interesting. Both core_btfgen and core_reloc
reuse the same set of struct core_reloc_test_case array of test case
definitions. That in itself is not a problem, but btfgen test replaces
test_case->btf_src_file property with the path to temporary file into
which minimized BTF is output by bpftool. This interferes with original
core_reloc tests, depending on order of tests execution (core_btfgen is
run first in sequential mode and skrews up subsequent core_reloc run by
pointing to already deleted temporary file, instead of the original BTF
files) and whether those two runs share the same process (in parallel
mode the chances are high for them to run in two separate processes and
so not interfere with each other).
To prevent this interference, create and use local copy of a test
definition. Mark original array as constant to catch accidental
modifcations. Note that setup_type_id_case_success() and
setup_type_id_case_success() still modify common test_case->output
memory area, but it is ok as each setup function has to re-initialize it
completely anyways. In sequential mode it leads to deterministic and
correct initialization. In parallel mode they will either each have
their own process, or if core_reloc and core_btfgen happen to be run by
the same worker process, they will still do that sequentially within the
worker process. If they are sharded across multiple processes, they
don't really share anything anyways.
Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just
a "flavor" of core_reloc test, not an independent set of tests. So make
it more obvious.
Last problem that needed solving was that location of bpftool differs
between test_progs and test_progs' flavors (e.g., test_progs-no_alu32).
To keep it simple, create a symlink to bpftool both inside
selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That
way, from inside core_reloc test, location to bpftool is just "./bpftool".
v2->v3:
- fix bpftool location relative the test_progs-no_alu32;
v1->v2:
- fix corruption of core_reloc_test_case.
Fixes: 704c91e59fe0 ("selftests/bpf: Test "bpftool gen min_core_btf")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yucong Sun <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Build the kernel and selftest with clang compiler with LLVM=1,
make -j LLVM=1
make -C tools/testing/selftests/bpf -j LLVM=1
I hit the following selftests/bpf compilation error:
In file included from test_cpp.cpp:3:
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:73:8:
error: 'relaxed_core_relocs' is deprecated: libbpf v0.6+: field has no effect [-Werror,-Wdeprecated-declarations]
struct bpf_object_open_opts {
^
test_cpp.cpp:56:2: note: in implicit move constructor for 'bpf_object_open_opts' first required here
LIBBPF_OPTS(bpf_object_open_opts, opts);
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:77:3: note: expanded from macro 'LIBBPF_OPTS'
(struct TYPE) { \
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:90:2: note: 'relaxed_core_relocs' has been explicitly marked deprecated here
LIBBPF_DEPRECATED_SINCE(0, 6, "field has no effect")
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:24:4: note: expanded from macro 'LIBBPF_DEPRECATED_SINCE'
(LIBBPF_DEPRECATED("libbpf v" # major "." # minor "+: " msg))
^
/.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:19:47: note: expanded from macro 'LIBBPF_DEPRECATED'
#define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg)))
There are two ways to fix the issue, one is to use GCC diagnostic ignore pragma, and the
other is to open code bpf_object_open_opts instead of using LIBBPF_OPTS.
Since in general LIBBPF_OPTS is preferred, the patch fixed the issue by
adding proper GCC diagnostic ignore pragmas.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The in kernel MPTCP PM implementation can process a single
incoming add address option at any given time. In the
mentioned test the server can surpass such limit. Let the
setup cope with that allowing a faster add_addr retransmission.
Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors")
Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254
Reported-and-tested-by: Matthieu Baerts <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The mentioned test has to wait for a subflow creation failure.
The current code looks for TCP sockets in TW state and sometimes
misses the relevant event. Switch to a more stable check, looking
for the associated mib counter.
Fixes: 46e967d187ed ("selftests: mptcp: add tests for subflow creation failure")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257
Reported-and-tested-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
I managed to get hold of a machine that has SEV but not SEV-ES, and
sev_migrate_tests fails because sev_vm_create(true) returns ENOTTY.
Fix this, and while at it also return KSFT_SKIP on machines that do
not have SEV at all, instead of returning 0.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
For SEV-ES VMs with mirrors to be intra-host migrated they need to be
able to migrate with the mirror. This is due to that fact that all VMSAs
need to be added into the VM with LAUNCH_UPDATE_VMSA before
lAUNCH_FINISH. Allowing migration with mirrors allows users of SEV-ES to
keep the mirror VMs VMSAs during migration.
Adds a list of mirror VMs for the original VM iterate through during its
migration. During the iteration the owner pointers can be updated from
the source to the destination. This fixes the ASID leaking issue which
caused the blocking of migration of VMs with mirrors.
Signed-off-by: Peter Gonda <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Marc Orr <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: [email protected]
Cc: [email protected]
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8e48 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To allow showing the 'help' menu even if these tools are not available.
While at it, also avoid launching the command then checking $?. Instead,
the check is directly done in the 'if'.
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
These tmp files will only be created when a test will be launched.
This avoid 'dd' output when '-h' is used for example.
While at it, also avoid creating netns that will be removed when
starting the first test.
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Shellcheck found that these variables were set but never used.
Note that rndh is no longer prefixed with '0-' but it doesn't change
anything.
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
With an error if it is an unknown option.
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch simplified pm_nl_change_endpoint(), using id-based address
lookups only. And dropped the fragile way of parsing 'addr' and 'id'
from the output of pm_nl_show_endpoints().
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
With the increase number of tests, one CI instance, using a debug kernel
config and not recent hardware, takes around 10 minutes to execute the
slowest MPTCP test: mptcp_join.sh.
Even if most CIs don't take that long to execute these tests --
typically max 10 minutes to run all selftests -- it will help some of
them if the timeout is increased.
The timeout could be disabled but it is always good to have an extra
safeguard, just in case.
Please note that on slow public CIs with kernel debug settings, it has
been observed it can easily take up to 45 minutes to execute all tests
in this very slow environment with other jobs running in parallel.
The slowest test, mptcp_join.sh takes ~30 minutes in this case.
In such environments, the selftests timeout set in the 'settings' file
is disabled because this environment is known as being exceptionnally
slow. It has been decided not to take such exceptional environments into
account and set the timeout to 20min.
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
|
|
Fast path bpf marge for some -next work.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|