| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a trivial test using YNL.
$ ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..2
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
Instantiate the family once, it takes longer than the test itself.
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add glue code for accessing the YNL library which lives under
tools/net and YAML spec files from under Documentation/.
Automatically figure out if tests are run in tree or not.
Since we'll want to use this library both from net and
drivers/net test targets make the library a target as well,
and automatically include it when net or drivers/net are
included. Making net/lib a target ensures that we end up
with only one copy of it, and saves us some path guessing.
Add a tiny bit of formatting support to be able to output KTAP
from the start.
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/ip_gre.c
17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head")
5832c4a77d69 ("ip_tunnel: convert __be16 tunnel flags to bitmaps")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
net/ipv6/ip6_fib.c
d21d40605bca ("ipv6: Fix infinite recursion in fib6_dump_done().")
5fc68320c1fb ("ipv6: remove RTNL protection from inet6_dump_fib()")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly.
If calling it in the 2nd test of endpoint_tests() too, it fails with an
error like this:
creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \
found '10.0.2.2 id 2 subflow dev ns2eth2'
The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: [email protected]
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they
accept non-MPC connections. As reported by Christoph, this is "surprising"
because the counter might become greater than MPTcpExtMPCapableSYNRX.
MPTcpExtMPCapableFallbackACK counter's name suggests it should only be
incremented when a connection was seen using MPTCP options, then a
fallback to TCP has been done. Let's do that by incrementing it when
the subflow context of an inbound MPC connection attempt is dropped.
Also, update mptcp_connect.sh kselftest, to ensure that the
above MIB does not increment in case a pure TCP client connects to a
MPTCP server.
Fixes: fc518953bc9c ("mptcp: add and use MIB counter infrastructure")
Cc: [email protected]
Reported-by: Christoph Paasch <[email protected]>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449
Signed-off-by: Davide Caratti <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The netdev CI runs in a VM and captures serial, so stdout and
stderr get combined. Because there's a missing new line in
stderr the test ends up corrupting KTAP:
# Successok 1 selftests: net: reuseaddr_conflict
which should have been:
# Success
ok 1 selftests: net: reuseaddr_conflict
Fixes: 422d8dc6fd3a ("selftest: add a reuseaddr test")
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds two tests using SO_REUSEADDR and SO_REUSEPORT and
defines errno for each test case.
SO_REUSEADDR/SO_REUSEPORT is set for the per-fixture two bind()
calls.
The notable pattern is the pair of v6only [::] and plain [::].
The two sockets are put into the same tb2, where per-bucket v6only
flag would be useless to detect bind() conflict.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
bhash2 was not well tested for IPv6-only sockets.
This patch adds test cases where we set IPV6_V6ONLY for per-fixture
bind() calls if variant->ipv6_only[i] is true.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In addtition to the two addresses defined in the fixtures, this patch
add 6 more bind calls():
* 0.0.0.0
* 127.0.0.1
* ::
* ::1
* ::ffff:0.0.0.0
* ::ffff:127.0.0.1
The first two per-fixture bind() calls control how inet_bind2_bucket
is created, and the rest 6 bind() calls cover as many conflicting
patterns as possible.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We don't have bind() conflict tests for the same protocol pairs.
Let's add them except for the same address pair, which will be
covered by the following patch adding 6 more bind() calls for
each test case.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, bind_wildcard.c calls bind() twice for two addresses and
checks the pre-defined errno against the 2nd call. Also, the two
bind() calls are swapped to cover various patterns how bind buckets
are created.
However, only testing two addresses is insufficient to detect regression.
So, we will add more bind() calls, and then, we need to define different
errno for each bind() per test case.
As a prepartion, let's define the reverse order bind() test cases as
fixtures.
No functional changes are intended.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, bind_wildcard.c tests only (IPv4, IPv6) pairs, but we will
add more tests for the same protocol pairs.
This patch makes it possible by changing the address pointer to void.
No functional changes are intended.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds test cases to verify the new GC.
We run each test for the following cases:
* SOCK_DGRAM
* SOCK_STREAM without embryo socket
* SOCK_STREAM without embryo socket + MSG_OOB
* SOCK_STREAM with embryo sockets
* SOCK_STREAM with embryo sockets + MSG_OOB
Before and after running each test case, we ensure that there is
no AF_UNIX socket left in the netns by reading /proc/net/protocols.
We cannot use /proc/net/unix and UNIX_DIAG because the embryo socket
does not show up there.
Each test creates multiple sockets in an array. We pass sockets in
the even index using the peer sockets in the odd index.
So, send_fd(0, 1) actually sends fd[0] to fd[2] via fd[0 + 1].
Test 1 : A <-> A
Test 2 : A <-> B
Test 3 : A -> B -> C <- D
^.___|___.' ^
`---------'
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
UDP tunnel packets can't be GRO in-between their endpoints as this
causes different issues. The UDP GRO fwd vxlan tests were relying on
this and their expectations have to be fixed.
We keep both vxlan tests and expected no GRO from happening. The vxlan
UDP GRO bench test was removed as it's not providing any valuable
information now.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Rerunning various scenarios to make sure lib.sh changes do not impact the
observable behavior is no fun. Add a selftest at least for the bare basics
-- the mechanics of setting RET, retmsg, and EXIT_STATUS.
Since the selftest itself uses lib.sh, it would be possible to break lib.sh
in such a way that invalidates result of the selftest. Since the metatest
only uses the bare basics (just pass/fail), hopefully such fundamental
breakages would be noticed.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/6d25cedbf2d4b83614944809a34fe023fbe8db38.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the NH group stats tests are currently run on a veth topology, the
HW-stats leg of each test is SKIP'ped. But kernel networking CI interprets
skips as a sign that tooling is missing, and prompts maintainer
investigation. Lack of capability to pass a test should be expressed as
XFAIL.
Selftests that require HW should normally be put in drivers/net/hw, but
doing so for the NH counter selftests would just lead to a lot of
duplicity.
So instead, introduce a helper, xfail_on_veth(), which can be used to mark
selftests that should XFAIL instead of FAILing when run on a veth topology.
On non-veth topology, they don't do anything.
Use the helper in the HW-stats part of router_mpath_nh_lib selftest.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/15f0ab9637aa0497f164ec30e83c1c8f53d53719.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When run on a slow machine, the scheduler traffic tests can be expected to
fail, and should be reported as XFAIL in that case. Therefore run these
tests through the perf_sensitive wrapper.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/9a357f8cf34f5ececac08d43a3eb023008996035.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Several tests in the suite use large amounts of traffic to e.g. cause
congestion and evaluate RED or shaper performance. These tests will not run
well on a slow machine, be it one with heavy debug kernel, or a VM, or e.g.
a single-board computer. Allow users to specify an environment variable,
KSFT_MACHINE_SLOW=yes, to indicate that the tests are being run on one such
machine.
Performance sensitive tests can then use a new helper, xfail_on_slow(), to
mark parts of the test that are sensitive to low-performance machines.
The helper can be used to just mark the whole suite, like so:
xfail_on_slow tests_run
... or, on the other side of the granularity spectrum, to override
individual checks:
xfail_on_slow check_err $? "Expected much, got little."
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/99a376a2d2ffdaeee7752b1910cb0c3ea5d80fbe.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In a previous patch, the interpretation of RET value was changed to mean
the kselftest framework constant with the test outcome: $ksft_pass,
$ksft_xfail, etc.
Update log_test() to recognize the various possible RET values.
Then have EXIT_STATUS track the RET value of the current test. This differs
subtly from the way RET tracks the value: while for RET we want to
recognize XFAIL as a separate status, for purposes of exit code, we want to
to conflate XFAIL and PASS, because they both communicate non-failure. Thus
add a new helper, ksft_exit_status_merge().
With this log_test_skip() and log_test_xfail() can be reexpressed as thin
wrappers around log_test.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/e5f807cb5476ab795fd14ac74da53a731a9fc432.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The variable RET keeps track of whether the test under execution has so far
failed or not. Currently it works in binary fashion: zero means everything
is fine, non-zero means something failed. log_test() then uses the value to
given a human-readable message.
In order to allow log_test() to report skips and xfails, the semantics of
RET need to be more fine-grained. Therefore have RET value be one of
kselftest framework constants: $ksft_fail, $ksft_xfail, etc.
The current logic in check_err() is such that first non-zero value of RET
trumps all those that follow. But that is not right when RET has more
fine-grained value semantics. Different outcomes have different weights.
The results of PASS and XFAIL are mostly the same: they both communicate a
test that did not go wrong. SKIP communicates lack of tooling, which the
user should go and try to fix, and as such should not be overridden by the
passes. So far, the higher-numbered statuses can be considered weightier.
But FAIL should be the weightiest.
Add a helper, ksft_status_merge(), which merges two statuses in a way that
respects the above conditions. Express it in a generic manner, because exit
status merge is subtly different, and we want to reuse the same logic.
Use the new helper when setting RET in check_err().
Re-express check_fail() in terms of check_err() to avoid duplication.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/7dfff51cc925c7a3ac879b9050a0d6a327c8d21f.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The following patches will operate with more exit codes besides
ksft_skip. Add them here.
Additionally, move a duplicated skip exit code definition from
forwarding/tc_tunnel_key.sh. Keep a similar duplicate in
forwarding/devlink_lib.sh, because even though lib.sh will have
been sourced in all cases where devlink_lib is, the inclusion is not
visible in the file itself, and relying on it would be confusing.
Cc: Davide Caratti <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/545a03046c7aca0628a51a389a9b81949ab288ce.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The SKIP return should be used for cases where tooling of the machine under
test is lacking. For cases where HW is lacking, the appropriate outcome is
XFAIL.
This is the case with ethtool_rmon and mlxsw_lib. For these, introduce a
new helper, log_test_xfail().
Do the same for router_mpath_nh_lib. Note that it will be fixed using a
more reusable way in a following patch.
For the two resource_scale selftests, the log should simply not be written,
because there is no problem.
Cc: Tobias Waldekranz <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/3d668d8fb6fa0d9eeb47ce6d9e54114348c7c179.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since the selftests that are not supposed to run on veth pairs are now in
their own dedicated directory, the skip_on_veth logic can go away. Drop it
from the selftests, and from lib.sh.
Cc: Danielle Ratson <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/63b470e10d65270571ee7de709b31672ce314872.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The tests in net/forwarding are generally expected to be HW-independent.
There are however several tests that, while not depending on any HW in
particular, nevertheless depend on being used on HW interfaces. Placing
these selftests to net/forwarding is confusing, because the selftest will
just report it can't be run on veth pairs. At the same time, placing them
to a particular driver's selftests subdirectory would be wrong.
Instead, add a new directory, drivers/net/hw, where these generic but HW
independent selftests should be placed. Move over several such tests
including one helper library.
Since typically these tests will not be expected to run, omit the directory
drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a
Makefile in the new directory itself, so that a user can make -C into that
directory and act on those tests explicitly.
Cc: Roger Quadros <[email protected]>
Cc: Tobias Waldekranz <[email protected]>
Cc: Danielle Ratson <[email protected]>
Cc: Davide Caratti <[email protected]>
Cc: Johannes Nixdorf <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/e11dae1f62703059e9fc2240004288ac7cc15756.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This library is always sourced in the context where lib.sh has already been
sourced as well. Therefore drop the explicit sourcing and expect the client
to already have done it. This will simplify moving some of the clients to a
different directory.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/a4da5e9cd42a34cbace917a048ca71081719d6ac.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
That any sort of customization is possible at all, let alone how it should
be done, is currently not at all clear. Document the whats and hows in
README.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Benjamin Poirier <[email protected]>
Link: https://lore.kernel.org/r/e819623af6aaeea49e9dc36cecd95694fad73bb8.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
forwarding.config.sample, net/lib.sh and net/forwarding/lib.sh contain
definitions and redefinitions of some of the same variables. The overlap
between net/forwarding/lib.sh and forwarding.config.sample is especially
large. This duplication is a potential source of confusion and problems.
It would be overall less error prone if each variable were defined in one
place only. In this patch set, that place is the library itself. Therefore
move all comments from forwarding.config.sample to net/forwarding/lib.sh.
Move over also a definition of TC_FLAG, which was missing from lib.sh
entirely.
Additionally, add to lib.sh a default definition of the topology variables.
The logic behind this is that forgetting to specify forwarding.config was a
frequent source of frustration for the selftest users. But really, most of
the time the default veth based topology is just fine. We considered just
sourcing forwarding.config.sample instead if forwarding.config is not
available, but this is a cleaner solution.
That means the syntax of the forwarding.config.sample override has to
change to an array assignment, so that the whole variable is overwritten,
not just individual keys, which could leave the value of some keys
unchanged. Do the same in lib.sh for any cut'n'pasters out there.
The config file is then given a sort of carte blanche to redefine whatever
variables it sees fit from the libraries. This is described in a comment in
the file. Only a handful of variables are left behind, to illustrate the
customization.
The fact that the variables are now missing from forwarding.config.sample,
and therefore would miss from forwarding.config derived from that file as
well, should not change anything. This is just the sample file. Users that
keep their own forwarding.config would retain it as before.
The only observable change is introduction of TC_FLAG to lib.sh, because
now the filters would not be attempted to install to HW datapath. For veth
pairs this does not change anything. For HW deployments, users presumably
have forwarding.config with this value overridden.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Benjamin Poirier <[email protected]>
Link: https://lore.kernel.org/r/b9b8a11a22821a7aa532211ff461a34f596e26bf.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The current syntax of X=${X:=X} first evaluates the ${X:=Y} expression,
which either uses the existing value of $X if there is one, or uses the
value of "Y" as a fallback, and assigns it to X. The expression is then
replaced with the now-current value of $X. Assigning that value to X once
more is meaningless.
So avoid the outer X=... bit, and instead express the same idea though the
do-nothing ":" built-in as : "${X:=Y}". This also cleans up the block
nicely and makes it more readable.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Benjamin Poirier <[email protected]>
Link: https://lore.kernel.org/r/1890ddc58420c2c0d5ba3154c87ecc6d9faf6947.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make sure that we don't return more bytes than we actually received if
the userspace buffer was bogus. We expect to receive at least the rest
of rec1, and possibly some of rec2 (currently, we don't, but that
would be ok).
Signed-off-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/720e61b3d3eab40af198a58ce2cd1ee019f0ceb1.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Locally generated IP multicast packets (such as the ones used in the
test) do not perform routing and simply egress the bound device.
However, as explained in commit 8bcfb4ae4d97 ("selftests: forwarding:
Fix failing tests with old libnet"), old versions of libnet (used by
mausezahn) do not use the "SO_BINDTODEVICE" socket option. Specifically,
the library started using the option for IPv6 sockets in version 1.1.6
and for IPv4 sockets in version 1.2. This explains why on Ubuntu - which
uses version 1.1.6 - the IPv4 overlay tests are failing whereas the IPv6
ones are passing.
Fix by specifying the source and destination MAC of the packets which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Tested-by: Mirsad Todorovac <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The tests send 100 pings in 0.1 second intervals and force a timeout of
11 seconds, which is borderline (especially on debug kernels), resulting
in random failures in netdev CI [1].
Fix by increasing the timeout to 20 seconds. It should not prolong the
test unless something is wrong, in which case the test will rightfully
fail.
[1]
# selftests: net/forwarding: vxlan_bridge_1d_port_8472_ipv6.sh
# INFO: Running tests with UDP port 8472
# TEST: ping: local->local [ OK ]
# TEST: ping: local->remote 1 [FAIL]
# Ping failed
[...]
Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Fixes: 728b35259e28 ("selftests: forwarding: Add VxLAN tests with a VLAN-aware bridge for IPv6")
Reported-by: Paolo Abeni <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
We should be able to independently flip either XDP or GRO states and toggling
one should not affect the other.
Adjust other tests as well that had implicit expectation that GRO would be
automatically enabled.
Signed-off-by: Ignat Korchagin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Passing a maximum attribute type to nlmsg_parse() that is larger than
the size of the passed policy will result in an out-of-bounds access [1]
when the attribute type is used as an index into the policy array.
Fix by setting the maximum attribute type according to the policy size,
as is already done for RTM_NEWNEXTHOP messages. Add a test case that
triggers the bug.
No regressions in fib nexthops tests:
# ./fib_nexthops.sh
[...]
Tests passed: 236
Tests failed: 0
[1]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x1e53/0x2940
Read of size 1 at addr ffffffff99ab4d20 by task ip/610
CPU: 3 PID: 610 Comm: ip Not tainted 6.8.0-rc7-custom-gd435d6e3e161 #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8f/0xe0
print_report+0xcf/0x670
kasan_report+0xd8/0x110
__nla_validate_parse+0x1e53/0x2940
__nla_parse+0x40/0x50
rtm_del_nexthop+0x1bd/0x400
rtnetlink_rcv_msg+0x3cc/0xf20
netlink_rcv_skb+0x170/0x440
netlink_unicast+0x540/0x820
netlink_sendmsg+0x8d3/0xdb0
____sys_sendmsg+0x31f/0xa60
___sys_sendmsg+0x13a/0x1e0
__sys_sendmsg+0x11c/0x1f0
do_syscall_64+0xc5/0x1d0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
[...]
The buggy address belongs to the variable:
rtm_nh_policy_del+0x20/0x40
Fixes: 2118f9390d83 ("net: nexthop: Adjust netlink policy parsing for a new attribute")
Reported-by: Eric Dumazet <[email protected]>
Closes: https://lore.kernel.org/netdev/CANn89i+UNcG0PJMW5X7gOMunF38ryMh=L1aeZUKH3kL4UdUqag@mail.gmail.com/
Reported-by: [email protected]
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.
Use KSFT_PASS and KSFT_FAIL macros instead of 0 and 1 after 'exit '
and 'ret=' in all scripts:
exit 0 -> exit ${KSFT_PASS}
exit 1 -> exit ${KSFT_FAIL}
ret=0 -> ret=${KSFT_PASS}
ret=1 -> ret=${KSFT_FAIL}
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-15-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
MPTCP event macros (SUB_ESTABLISHED, LISTENER_CREATED, LISTENER_CLOSED),
and the protocol family macros (AF_INET, AF_INET6) are defined in both
mptcp_join.sh and userspace_pm.sh. In order not to duplicate code, this
patch declares them all in mptcp_lib.sh with MPTCP_LIB_ prefixs.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-14-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To avoid duplicated code in different MPTCP selftests, we can add and use
helpers defined in mptcp_lib.sh.
The helper verify_listener_events() is defined both in mptcp_join.sh and
userspace_pm.sh, export it into mptcp_lib.sh and rename it with mptcp_lib_
prefix. Use this new helper in both scripts.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-13-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
verify_listener_events() helper will be exported into mptcp_lib.sh as a
public function, but print_test() is invoked in it, which is a private
function in userspace_pm.sh only. So this patch moves print_test() out of
verify_listener_events().
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-12-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Extract the main part of check_expected() in userspace_pm.sh to a new
function mptcp_lib_check_expected() in mptcp_lib.sh. It will be used
in both mptcp_john.sh and userspace_pm.sh. check_expected_one() is
moved into mptcp_lib.sh too as mptcp_lib_check_expected_one().
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-11-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch modifies test_fail() to call mptcp_lib_pr_fail() only if there
are arguments (if [ ${#} -gt 0 ]) in userspace_pm.sh, add arguments
"unexpected type: ${type}" when calling test_fail() from test_remove().
Then mptcp_lib_pr_fail() can be used in check_expected_one() instead of
test_fail().
The same in mptcp_join.sh, calling fail_test() without argument, and adapt
this helper not to call print_fail() in this case.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-10-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To unify the output formats of all test scripts, this patch adds
four more helpers:
mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()
to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.
Having colors helps to quickly identify issues when looking at a long
list of output logs and results.
Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch uses addition assignment operator (+=) to append strings
instead of duplicating the variable name in mptcp_connect.sh and
mptcp_join.sh.
This can make the statements shorter.
Note: in mptcp_connect.sh, add a local variable extra in do_transfer to
save the various extra warning logs, using += to append it. And add a
new variable tc_info to save various tc info, also using += to append it.
This can make the code more readable and prepare for the next commit.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-8-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new helper mptcp_lib_print_title(), a wrapper of
mptcp_lib_inc_test_counter() and mptcp_lib_pr_title_counter(), to
print out test counter in each test result and increase the counter.
Use this helper to print out test counters for every tests in diag.sh,
mptcp_connect.sh, mptcp_sockopt.sh, pm_netlink.sh, simult_flows.sh,
and userspace_pm.sh.
diag.sh:
01 no msk on netns creation [ ok ]
02 listen match for dport 10000 [ ok ]
03 listen match for sport 10000 [ ok ]
04 listen match for saddr and sport [ ok ]
05 all listen sockets [ ok ]
mptcp_connect.sh:
01 New MPTCP socket can be blocked via sysctl [ OK ]
02 Validating network environment with pings [ OK ]
INFO: Using loss of 0.85% delay 31 ms reorder .. with delay 7ms on ns3eth4
03 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 69ms) [ OK ]
04 ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 20ms) [ OK ]
05 ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 16ms) [ OK ]
mptcp_sockopt.sh:
01 Transfer v4 [ OK ]
02 Mark v4 [ OK ]
03 Transfer v6 [ OK ]
04 Mark v6 [ OK ]
05 SOL_MPTCP sockopt v4 [ OK ]
pm_netlink.sh:
01 defaults addr list [ OK ]
02 simple add/get addr [ OK ]
03 dump addrs [ OK ]
04 simple del addr [ OK ]
05 dump addrs after del [ OK ]
simult_flows.sh:
01 balanced bwidth 7391 max 8456 [ OK ]
02 balanced bwidth - reverse direction 7403 max 8456 [ OK ]
03 balanced bwidth with unbalanced delay 7429 max 8456 [ OK ]
04 balanced bwidth with unbalanced delay - reverse ... 7485 max 8456 [ OK ]
05 unbalanced bwidth 7549 max 8456 [ OK ]
userspace_pm.sh:
01 Created network namespaces ns1, ns2 [ OK ]
INFO: Make connections
02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
INFO: Announce tests
04 ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [ OK ]
05 ADD_ADDR id:67 10.0.2.2 (ns2) => ns1, reuse port [ OK ]
Having test counters helps to quickly identify issues when looking at a
long list of output logs and results.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-7-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new variable MPTCP_LIB_TEST_FORMAT as the test title
printing format. Also add a helper mptcp_lib_print_title() to use this
format to print the test title with test counters. They are used in
mptcp_join.sh first.
Each MPTCP selftest is having subtests, and it helps to give them a
number to quickly identify them. This can be managed by mptcp_lib.sh,
reusing what has been done here. The following commit will use these
new helpers in the other tests.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-6-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in diag.sh and simult_flows.sh, which are initialized to 1. To maintain
consistency, this patch renames them all as MPTCP_LIB_TEST_COUNTER,
initializes it to 1, and exports it into mptcp_lib.sh.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-5-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Only total test results are printed out in mptcp_sockopt.sh:
PASS: all packets had packet mark set
PASS: SOL_MPTCP getsockopt has expected information
PASS: TCP_INQ cmsg/ioctl -t tcp
PASS: TCP_INQ cmsg/ioctl -6 -t tcp
PASS: TCP_INQ cmsg/ioctl -r tcp
PASS: TCP_INQ cmsg/ioctl -6 -r tcp
PASS: TCP_INQ cmsg/ioctl -r tcp -t tcp
They mismatch with the test results:
ok 1 - mptcp_sockopt: mark ipv4
ok 2 - mptcp_sockopt: transfer ipv4
ok 3 - mptcp_sockopt: mark ipv6
ok 4 - mptcp_sockopt: transfer ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
'mptcp_sockopt.sh' now display more detailed results + why (what you had
in a former patch from v6, merged here). It no longer displays 'PASS:',
because it is duplicated info now that the detailed are displayed:
Transfer v4 [ OK ]
Mark v4 [ OK ]
Transfer v6 [ OK ]
Mark v6 [ OK ]
SOL_MPTCP sockopt v4 [ OK ]
SOL_MPTCP sockopt v6 [ OK ]
TCP_INQ cmsg/ioctl -t tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -t tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -r tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp -t tcp [ OK ]
Also fix the TAP output:
ok 1 - mptcp_sockopt: transfer ipv4
ok 2 - mptcp_sockopt: mark ipv4
ok 3 - mptcp_sockopt: transfer ipv6
ok 4 - mptcp_sockopt: mark ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-4-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The first [ OK ] in the output of mptcp_connect.sh misaligns with the
others:
New MPTCP socket can be blocked via sysctl [ OK ]
INFO: validating network environment with pings
INFO: Using loss of 0.85% delay 16 ms reorder 95% 70% with delay 4ms on
ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 184ms) [ OK ]
ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 50ms) [ OK ]
ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 55ms) [ OK ]
This patch aligns them by using 69 chars to display the first two lines,
and 50 chars for the other. Since 19 chars are used to display duration
time. Also print out a [ OK ] at the end of the 2nd line for consistency.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-3-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds a new dedicated counter 'port' instead of TEST_COUNT
to increase port numbers in mptcp_connect.sh.
This can avoid outputting discontinuous test counters.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-2-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some error messages are printed to stderr while the others are printed
to 'stdout'. As part of the unification, this patch drop "1>&2" to let
all errors messages are printed to 'stdout'.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-1-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add to lib.sh support for fetching NH stats, and a new library,
router_mpath_nh_lib.sh, with the common code for testing NH stats.
Use the latter from router_mpath_nh.sh and router_mpath_nh_res.sh.
The test works by sending traffic through a NH group, and checking that the
reported values correspond to what the link that ultimately receives the
traffic reports having seen.
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/2a424c54062a5f1efd13b9ec5b2b0e29c6af2574.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
'make_connection' is launched twice: once for IPv4, once for IPv6.
But then, the "pm_nl_ctl events" was launched a first time, killed, then
relaunched after for no particular reason.
We can then move this code, and the generation of the temp file to
exchange, to the init part, and remove extra conditions that no longer
needed.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-12-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|