aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net/tls.c
AgeCommit message (Collapse)AuthorFilesLines
2020-06-08net/tls(TLS_SW): Add selftest for 'chunked' sendfile testPooja Trivedi1-0/+58
This selftest tests for cases where sendfile's 'count' parameter is provided with a size greater than the intended file size. Motivation: When sendfile is provided with 'count' parameter value that is greater than the size of the file, kTLS example fails to send the file correctly. Last chunk of the file is not sent, and the data integrity is compromised. The reason is that the last chunk has MSG_MORE flag set because of which it gets added to pending records, but is not pushed. Note that if user space were to send SSL_shutdown control message, pending records would get flushed and the issue would not happen. So a shutdown control message following sendfile can mask the issue. Signed-off-by: Pooja Trivedi <[email protected]> Signed-off-by: Mallesham Jatharkonda <[email protected]> Signed-off-by: Josh Tway <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-28selftests: tls: run all tests for TLS 1.2 and TLS 1.3Jakub Kicinski1-76/+17
TLS 1.2 and TLS 1.3 differ in the implementation. Use fixture parameters to run all tests for both versions, and remove the one-off TLS 1.2 test. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-14selftests: net: tls: remove recv_rcvbuf testThadeu Lima de Souza Cascardo1-28/+0
This test only works when [1] is applied, which was rejected. Basically, the errors are reported and cleared. In this particular case of tls sockets, following reads will block. The test case was originally submitted with the rejected patch, but, then, was included as part of a different patchset, possibly by mistake. [1] https://lore.kernel.org/netdev/[email protected]/#t Thanks Paolo Pisati for pointing out the original patchset where this appeared. Fixes: 65190f77424d (selftests/tls: add a test for fragmented messages) Reported-by: Paolo Pisati <[email protected]> Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-12-06net/tls: Fix return values to avoid ENOTSUPPValentin Vidic1-6/+2
ENOTSUPP is not available in userspace, for example: setsockopt failed, 524, Unknown error 524 Signed-off-by: Valentin Vidic <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-28selftests/tls: add a test for fragmented messagesJakub Kicinski1-0/+60
Add a sendmsg test with very fragmented messages. This should fill up sk_msg and test the boundary conditions. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06selftests/tls: add test for concurrent recv and sendJakub Kicinski1-0/+108
Add a test which spawns 16 threads and performs concurrent send and recv calls on the same socket. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-05selftests/tls: add a litmus test for the socket reuse through shutdownJakub Kicinski1-0/+24
Make sure that shutdown never works, and at the same time document how I tested to came to the conclusion that currently reuse is not possible. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-31selftests/tls: fix TLS tests with CONFIG_TLS=nJakub Kicinski1-9/+14
Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot <[email protected]> Fixes: cf32526c8842 ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb317c6 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-22selftests/tls: add shutdown testsJakub Kicinski1-0/+27
Add test for killing the connection via shutdown. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-22selftests/tls: close the socket with open recordJakub Kicinski1-0/+10
Add test which sends some data with MSG_MORE and then closes the socket (never calling send without MSG_MORE). This should make sure we clean up open records correctly. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-22selftests/tls: add a bidirectional testJakub Kicinski1-0/+31
Add a simple test which installs the TLS state for both directions, sends and receives data on both sockets. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-22selftests/tls: test error codes around TLS ULP installationJakub Kicinski1-0/+52
Test the error codes returned when TCP connection is not in ESTABLISHED state. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-22selftests/tls: add a test for ULP but no keysJakub Kicinski1-0/+74
Make sure we test the TLS_BASE/TLS_BASE case both with data and the tear down/clean up path. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-07selftests/tls: add test for poll() with data in TLS ULPJakub Kicinski1-0/+26
Add a test which checks if leftover record data in TLS layer correctly wakes up poll(). Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-26selftests/tls: add test for sleeping even though there is dataJakub Kicinski1-0/+15
Add a test which sends 15 bytes of data, and then tries to read 10 byes twice. Previously the second read would sleep indifinitely, since the record was already decrypted and there is only 5 bytes left, not full 10. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-26selftests/tls: test for lowat overshoot with multiple recordsJakub Kicinski1-0/+19
Set SO_RCVLOWAT and test it gets respected when gathering data from multiple records. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-02-20selftest/tls: Add test to verify received 'type' of non-data recordVakul Garg1-0/+14
Test case 'control_msg' has been updated to peek non-data record and then verify the type of record received. Subsequently, the same record is retrieved without MSG_PEEK flag in recvmsg(). Signed-off-by: Vakul Garg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-02-01net: tls: Add tests for TLS 1.3Dave Watson1-1/+75
Change most tests to TLS 1.3, while adding tests for previous TLS 1.2 behavior. Signed-off-by: Dave Watson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-02-01net: tls: Support 256 bit keysDave Watson1-0/+62
Wire up support for 256 bit keys from the setsockopt to the crypto framework Signed-off-by: Dave Watson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-17selftests/tls: Fix recv partial/large_buff test casesVakul Garg1-5/+7
TLS test cases recv_partial & recv_peek_large_buf_mult_recs expect to receive a certain amount of data and then compare it against known strings using memcmp. To prevent recvmsg() from returning lesser than expected number of bytes (compared in memcmp), MSG_WAITALL needs to be passed in recvmsg(). Signed-off-by: Vakul Garg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-10-01selftests/tls: Fix recv(MSG_PEEK) & splice() test casesVakul Garg1-10/+10
TLS test cases splice_from_pipe, send_and_splice & recv_peek_multiple_records expect to receive a given nummber of bytes and then compare them against the number of bytes which were sent. Therefore, system call recv() must not return before receiving the requested number of bytes, otherwise the subsequent memcmp() fails. This patch passes MSG_WAITALL flag to recv() so that it does not return prematurely before requested number of bytes are copied to receive buffer. Signed-off-by: Vakul Garg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-18Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+50
Two new tls tests added in parallel in both net and net-next. Used Stephen Rothwell's linux-next resolution. Signed-off-by: David S. Miller <[email protected]>
2018-09-17selftests/tls: Add MSG_WAITALL in recv() syscallVakul Garg1-9/+9
A number of tls selftests rely upon recv() to return an exact number of data bytes. When tls record crypto is done using an async accelerator, it is possible that recv() returns lesser than expected number bytes. This leads to failure of many test cases. To fix it, MSG_WAITALL has been used in flags passed to recv() syscall. Signed-off-by: Vakul Garg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-17tls: fix currently broken MSG_PEEK behaviorDaniel Borkmann1-0/+49
In kTLS MSG_PEEK behavior is currently failing, strace example: [pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3 [pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4 [pid 2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2430] listen(4, 10) = 0 [pid 2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 [pid 2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5 [pid 2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2430] close(4) = 0 [pid 2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14 [pid 2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11 [pid 2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64 As can be seen from strace, there are two TLS records sent, i) 'test_read_peek' and ii) '_mult_recs\0' where we end up peeking 'test_read_peektest_read_peektest'. This is clearly wrong, and what happens is that given peek cannot call into tls_sw_advance_skb() to unpause strparser and proceed with the next skb, we end up looping over the current one, copying the 'test_read_peek' over and over into the user provided buffer. Here, we can only peek into the currently held skb (current, full TLS record) as otherwise we would end up having to hold all the original skb(s) (depending on the peek depth) in a separate queue when unpausing strparser to process next records, minimally intrusive is to return only up to the current record's size (which likely was what c46234ebb4d1 ("tls: RX path for ktls") originally intended as well). Thus, after patch we properly peek the first record: [pid 2046] wait4(2075, <unfinished ...> [pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3 [pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4 [pid 2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2075] listen(4, 10) = 0 [pid 2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 [pid 2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5 [pid 2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2075] close(4) = 0 [pid 2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14 [pid 2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11 [pid 2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14 Fixes: c46234ebb4d1 ("tls: RX path for ktls") Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-01selftests/tls: Add test for recv(PEEK) spanning across multiple recordsVakul Garg1-0/+22
Added test case to receive multiple records with a single recvmsg() operation with a MSG_PEEK set. Signed-off-by: David S. Miller <[email protected]>
2018-07-16selftests: tls: add selftests for TLS socketsDave Watson1-0/+692
Add selftests for tls socket. Tests various iov and message options, poll blocking and nonblocking behavior, partial message sends / receives, and control message data. Tests should pass regardless of if TLS is enabled in the kernel or not, and print a warning message if not. Signed-off-by: Dave Watson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.