aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf
AgeCommit message (Collapse)AuthorFilesLines
2021-03-04bpf: Explicitly zero-extend R0 after 32-bit cmpxchgBrendan Jackman2-0/+50
As pointed out by Ilya and explained in the new comment, there's a discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads the value from memory into r0, while x86 only does so when r0 and the value in memory are different. The same issue affects s390. At first this might sound like pure semantics, but it makes a real difference when the comparison is 32-bit, since the load will zero-extend r0/rax. The fix is to explicitly zero-extend rax after doing such a CMPXCHG. Since this problem affects multiple archs, this is done in the verifier by patching in a BPF_ZEXT_REG instruction after every 32-bit cmpxchg. Any archs that don't need such manual zero-extension can do a look-ahead with insn_is_zext to skip the unnecessary mov. Note this still goes on top of Ilya's patch: https://lore.kernel.org/bpf/[email protected]/T/#u Differences v5->v6[1]: - Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it and removed 'inline' to match the style of the is_*_function helpers. - Fixed up comments in verifier test (thanks for the careful review, Martin!) Differences v4->v5[1]: - Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin for suggesting this. Differences v3->v4[1]: - Moved the optimization against pointless zext into the correct place: opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls. Differences v2->v3[1]: - Moved patching into fixup_bpf_calls (patch incoming to rename this function) - Added extra commentary on bpf_jit_needs_zext - Added check to avoid adding a pointless zext(r0) if there's already one there. Difference v1->v2[1]: Now solved centrally in the verifier instead of specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions! [1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t v3: https://lore.kernel.org/bpf/[email protected]/T/#t v2: https://lore.kernel.org/bpf/[email protected]/T/#t v1: https://lore.kernel.org/bpf/[email protected]/T/#t Reported-by: Ilya Leoshkevich <[email protected]> Fixes: 5ffa25502b5a ("bpf: Add instructions for atomic_[cmp]xchg") Signed-off-by: Brendan Jackman <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Acked-by: Ilya Leoshkevich <[email protected]> Tested-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2021-03-02selftests/bpf: Mask bpf_csum_diff() return value to 16 bits in test_verifierYauheni Kaliuta1-1/+2
The verifier test labelled "valid read map access into a read-only array 2" calls the bpf_csum_diff() helper and checks its return value. However, architecture implementations of csum_partial() (which is what the helper uses) differ in whether they fold the return value to 16 bit or not. For example, x86 version has ... if (unlikely(odd)) { result = from32to16(result); result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); } ... while generic lib/checksum.c does: result = from32to16(result); if (odd) result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); This makes the helper return different values on different architectures, breaking the test on non-x86. To fix this, add an additional instruction to always mask the return value to 16 bits, and update the expected return value accordingly. Fixes: fb2abb73e575 ("bpf, selftest: test {rd, wr}only flags and direct value access") Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-03-02selftests/bpf: Use the last page in test_snprintf_btf on s390Ilya Leoshkevich1-3/+10
test_snprintf_btf fails on s390, because NULL points to a readable struct lowcore there. Fix by using the last page instead. Error message example: printing fffffffffffff000 should generate error, got (361) Fixes: 076a95f5aff2 ("selftests/bpf: Add bpf_snprintf_btf helper tests") Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Heiko Carstens <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-24selftests/bpf: No need to drop the packet when there is no geneve optHangbin Liu1-4/+2
In bpf geneve tunnel test we set geneve option on tx side. On rx side we only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b48119 ("ip_tunnels: Set tunnel option flag when tunnel metadata is present") geneve_rx() will not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in test_tunnel_kern.c drop the packet. As it should be valid that bpf_skb_get_tunnel_opt() return error when there is not tunnel option, there is no need to drop the packet and break all geneve rx traffic. Just set opt_class to 0 in this test and keep returning TC_ACT_OK. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: William Tu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-24selftests/bpf: Fix a compiler warning in global func testDmitrii Banshchikov1-1/+1
Add an explicit 'const void *' cast to pass program ctx pointer type into a global function that expects pointer to structure. warning: incompatible pointer types passing 'struct __sk_buff *' to parameter of type 'const struct S *' [-Wincompatible-pointer-types] return foo(skb); ^~~ progs/test_global_func11.c:10:36: note: passing argument to parameter 's' here __noinline int foo(const struct S *s) ^ Fixes: 8b08807d039a ("selftests/bpf: Add unit tests for pointers in global functions") Signed-off-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-22bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as srcBrendan Jackman1-0/+23
This code generates a CMPXCHG loop in order to implement atomic_fetch bitwise operations. Because CMPXCHG is hard-coded to use rax (which holds the BPF r0 value), it saves the _real_ r0 value into the internal "ax" temporary register and restores it once the loop is complete. In the middle of the loop, the actual bitwise operation is performed using src_reg. The bug occurs when src_reg is r0: as described above, r0 has been clobbered and the real r0 value is in the ax register. Therefore, perform this operation on the ax register instead, when src_reg is r0. Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions") Signed-off-by: Brendan Jackman <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-7/+3
2021-02-12selftests/bpf: Add unit tests for pointers in global functionsDmitrii Banshchikov11-0/+449
test_global_func9 - check valid pointer's scenarios test_global_func10 - check that a smaller type cannot be passed as a larger one test_global_func11 - check that CTX pointer cannot be passed test_global_func12 - check access to a null pointer test_global_func13 - check access to an arbitrary pointer value test_global_func14 - check that an opaque pointer cannot be passed test_global_func15 - check that a variable has an unknown value after it was passed to a global function by pointer test_global_func16 - check access to uninitialized stack memory test_global_func_args - check read and write operations through a pointer Signed-off-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-13selftests/bpf: Tests using bpf_check_mtu BPF-helperJesper Dangaard Brouer2-0/+414
Adding selftest for BPF-helper bpf_check_mtu(). Making sure it can be used from both XDP and TC. V16: - Fix 'void' function definition V11: - Addresse nitpicks from Andrii Nakryiko V10: - Remove errno non-zero test in CHECK_ATTR() - Addresse comments from Andrii Nakryiko Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/161287791989.790810.13612620012522164562.stgit@firesoul
2021-02-13selftests/bpf: Use bpf_check_mtu in selftest test_cls_redirectJesper Dangaard Brouer1-0/+7
This demonstrate how bpf_check_mtu() helper can easily be used together with bpf_skb_adjust_room() helper, prior to doing size adjustment, as delta argument is already setup. Hint: This specific test can be selected like this: ./test_progs -t cls_redirect Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/161287791481.790810.4444271170546646080.stgit@firesoul
2021-02-12selftests/bpf: Add test for bpf_iter_task_vmaSong Liu3-10/+174
The test dumps information similar to /proc/pid/maps. The first line of the output is compared against the /proc file to make sure they match. Signed-off-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12bpf: selftests: Add non function pointer test to struct_opsMartin KaFai Lau1-0/+1
This patch adds a "void *owner" member. The existing bpf_tcp_ca test will ensure the bpf_cubic.o and bpf_dctcp.o can be loaded. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftests/bpf: Add a selftest for the tracing bpf_get_socket_cookieFlorent Revest2-6/+41
This builds up on the existing socket cookie test which checks whether the bpf_get_socket_cookie helpers provide the same value in cgroup/connect6 and sockops programs for a socket created by the userspace part of the test. Instead of having an update_cookie sockops program tag a socket local storage with 0xFF, this uses both an update_cookie_sockops program and an update_cookie_tracing program which succesively tag the socket with 0x0F and then 0xF0. Signed-off-by: Florent Revest <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftests/bpf: Use vmlinux.h in socket_cookie_prog.cFlorent Revest1-5/+6
When migrating from the bpf.h's to the vmlinux.h's definition of struct bps_sock, an interesting LLVM behavior happened. LLVM started producing two fetches of ctx->sk in the sockops program this means that the verifier could not keep track of the NULL-check on ctx->sk. Therefore, we need to extract ctx->sk in a variable before checking and dereferencing it. Signed-off-by: Florent Revest <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: KP Singh <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftests/bpf: Integrate the socket_cookie test to test_progsFlorent Revest5-213/+72
Currently, the selftest for the BPF socket_cookie helpers is built and run independently from test_progs. It's easy to forget and hard to maintain. This patch moves the socket cookies test into prog_tests/ and vastly simplifies its logic by: - rewriting the loading code with BPF skeletons - rewriting the server/client code with network helpers - rewriting the cgroup code with test__join_cgroup - rewriting the error handling code with CHECKs Signed-off-by: Florent Revest <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: KP Singh <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftests/bpf: Convert test_xdp_redirect.sh to bashBjörn Töpel1-7/+3
The test_xdp_redirect.sh script uses a bash feature, '&>'. On systems, e.g. Debian, where '/bin/sh' is dash, this will not work as expected. Use bash in the shebang to get the expected behavior. Further, using 'set -e' means that the error of a command cannot be captured without the command being executed with '&&' or '||'. Let us restructure the ping-commands, and use them as an if-expression, so that we can capture the return value. v4: Added missing Fixes:, and removed local variables. (Andrii) v3: Reintroduced /bin/bash, and kept 'set -e'. (Andrii) v2: Kept /bin/sh and removed bashisms. (Randy) Fixes: 996139e801fd ("selftests: bpf: add a test for XDP redirect") Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftests/bpf: Add a test for map-in-map and per-cpu maps in sleepable progsAlexei Starovoitov1-0/+69
Add a basic test for map-in-map and per-cpu maps in sleepable programs. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftests/bpf: Improve recursion selftestAlexei Starovoitov1-0/+8
Since recursion_misses counter is available in bpf_prog_info improve the selftest to make sure it's counting correctly. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11selftest/bpf: Add a recursion testAlexei Starovoitov2-0/+79
Add recursive non-sleepable fentry program as a test. All attach points where sleepable progs can execute are non recursive so far. The recursion protection mechanism for sleepable cannot be activated yet. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Add per-program recursion prevention mechanismAlexei Starovoitov2-4/+4
Since both sleepable and non-sleepable programs execute under migrate_disable add recursion prevention mechanism to both types of programs when they're executed via bpf trampoline. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-10selftests/bpf: Simplify the calculation of variablesJiapeng Chong1-3/+3
Fix the following coccicheck warnings: ./tools/testing/selftests/bpf/xdpxceiver.c:954:28-30: WARNING !A || A && B is equivalent to !A || B. ./tools/testing/selftests/bpf/xdpxceiver.c:932:28-30: WARNING !A || A && B is equivalent to !A || B. ./tools/testing/selftests/bpf/xdpxceiver.c:909:28-30: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/1612860398-102839-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-10selftests/bpf: Fix endianness issues in atomic testsIlya Leoshkevich3-3/+3
Atomic tests store a DW, but then load it back as a W from the same address. This doesn't work on big-endian systems, and since the point of those tests is not testing narrow loads, fix simply by loading a DW. Fixes: 98d666d05a1d ("bpf: Add tests for new BPF atomic operations") Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-10selftest/bpf: Add test for var-offset stack accessAndrei Matei2-0/+86
Add a higher-level test (C BPF program) for the new functionality - variable access stack reads and writes. Signed-off-by: Andrei Matei <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-10selftest/bpf: Verifier tests for var-off accessAndrei Matei1-2/+97
Add tests for the new functionality - reading and writing to the stack through a variable-offset pointer. Signed-off-by: Andrei Matei <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-10selftest/bpf: Adjust expected verifier errorsAndrei Matei9-37/+41
The verifier errors around stack accesses have changed slightly in the previous commit (generally for the better). Signed-off-by: Andrei Matei <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08selftests/bpf: Add missing cleanup in atomic_bounds testBrendan Jackman1-0/+2
Add missing skeleton destroy call. Fixes: 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") Reported-by: Yonghong Song <[email protected]> Signed-off-by: Brendan Jackman <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08selftests/bpf: Remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/bpf/test_flow_dissector.c:506:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08bpf/benchs/bench_ringbufs: Remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/bpf/benchs/bench_ringbufs.c:322:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-04bpf/selftests: Update the IMA test to use BPF ring bufferKP Singh2-13/+43
Instead of using shared global variables between userspace and BPF, use the ring buffer to send the IMA hash on the BPF ring buffer. This helps in validating both IMA and the usage of the ringbuffer in sleepable programs. Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-04bpf/selftests: Add a short note about vmtest.sh in README.rstKP Singh1-0/+24
Add a short note to make contributors aware of the existence of the script. The documentation does not intentionally document all the options of the script to avoid mentioning it in two places (it's available in the usage / help message of the script). Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-04bpf: Helper script for running BPF presubmit testsKP Singh1-0/+368
The script runs the BPF selftests locally on the same kernel image as they would run post submit in the BPF continuous integration framework. The goal of the script is to allow contributors to run selftests locally in the same environment to check if their changes would end up breaking the BPF CI and reduce the back-and-forth between the maintainers and the developers. Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-03selftest/bpf: Testing for multiple logs on REJECTAndrei Matei1-3/+13
This patch adds support to verifier tests to check for a succession of verifier log messages on program load failure. This makes the errstr field work uniformly across REJECT and VERBOSE_ACCEPT checks. This patch also increases the maximum size of a message in the series of messages to test from 80 chars to 200 chars. This is in order to keep existing tests working, which sometimes test for messages larger than 80 chars (which was accepted in the REJECT case, when testing for a single message, but not in the VERBOSE_ACCEPT case, when testing for possibly multiple messages). And example of such a long, checked message is in bounds.c: "R1 has unknown scalar with mixed signed bounds, pointer arithmetic with it prohibited for !root" Signed-off-by: Andrei Matei <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-02selftests/bpf: Fix a compiler warning in local_storage testKP Singh1-1/+1
Some compilers trigger a warning when tmp_dir_path is allocated with a fixed size of 64-bytes and used in the following snprintf: snprintf(tmp_exec_path, sizeof(tmp_exec_path), "%s/copy_of_rm", tmp_dir_path); warning: ‘/copy_of_rm’ directive output may be truncated writing 11 bytes into a region of size between 1 and 64 [-Wformat-truncation=] This is because it assumes that tmp_dir_path can be a maximum of 64 bytes long and, therefore, the end-result can get truncated. Fix it by not using a fixed size in the initialization of tmp_dir_path which allows the compiler to track actual size of the array better. Fixes: 2f94ac191846 ("bpf: Update local storage test to check handling of null ptrs") Signed-off-by: KP Singh <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-02bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCHBrendan Jackman3-0/+66
When BPF_FETCH is set, atomic instructions load a value from memory into a register. The current verifier code first checks via check_mem_access whether we can access the memory, and then checks via check_reg_arg whether we can write into the register. For loads, check_reg_arg has the side-effect of marking the register's value as unkonwn, and check_mem_access has the side effect of propagating bounds from memory to the register. This currently only takes effect for stack memory. Therefore with the current order, bounds information is thrown away, but by simply reversing the order of check_reg_arg vs. check_mem_access, we can instead propagate bounds smartly. A simple test is added with an infinite loop that can only be proved unreachable if this propagation is present. This is implemented both with C and directly in test_verifier using assembly. Suggested-by: John Fastabend <[email protected]> Signed-off-by: Brendan Jackman <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-29bpf: Enable bpf_{g,s}etsockopt in BPF_CGROUP_UDP{4,6}_RECVMSGStanislav Fomichev2-0/+10
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket. Note that we could remove the switch for prog->expected_attach_type altogether since all current sock_addr attach types are covered. However, it makes sense to keep it as a safe-guard in case new sock_addr attach types are added that might not operate on a locked socket. Therefore, avoid to let this slip through. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-29selftests/bpf: Rewrite recvmsg{4,6} asm progs to c in test_sock_addrStanislav Fomichev3-74/+92
I'll extend them in the next patch. It's easier to work with C than with asm. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-29bpf: Enable bpf_{g,s}etsockopt in BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAMEStanislav Fomichev2-0/+16
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-29bpf: Enable bpf_{g,s}etsockopt in BPF_CGROUP_UDP{4,6}_SENDMSGStanislav Fomichev3-0/+33
Can be used to query/modify socket state for unconnected UDP sendmsg. Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-29tools: Factor Clang, LLC and LLVM utils definitionsSedat Dilek1-2/+0
When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool. While looking into the source code I found duplicate assignments in misc tools for the LLVM eco system, e.g. clang and llvm-objcopy. Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include file and add missing includes where needed. Honestly, I was inspired by the commit c8a950d0d3b9 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions"). I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1. Build instructions: [ make and make-options ] MAKE="make V=1" MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1" MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole" [ clean-up ] $MAKE $MAKE_OPTS -C tools/ clean [ bpftool ] $MAKE $MAKE_OPTS -C tools/bpf/bpftool/ [ perf ] PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/ I was careful with respecting the user's wish to override custom compiler, linker, GNU/binutils and/or LLVM utils settings. Signed-off-by: Sedat Dilek <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> # tools/build and tools/perf Link: https://lore.kernel.org/bpf/[email protected]
2021-01-27selftests/bpf: Verify that rebinding to port < 1024 from BPF worksStanislav Fomichev2-0/+154
Return 3 to indicate that permission check for port 111 should be skipped. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Don't exit on failed bpf_testmod unloadAndrii Nakryiko1-1/+1
Fix bug in handling bpf_testmod unloading that will cause test_progs exiting prematurely if bpf_testmod unloading failed. This is especially problematic when running a subset of test_progs that doesn't require root permissions and doesn't rely on bpf_testmod, yet will fail immediately due to exit(1) in unload_bpf_testmod(). Fixes: 9f7fa225894c ("selftests/bpf: Add bpf_testmod kernel module for testing") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Avoid useless void *-castsBjörn Töpel1-5/+5
There is no need to cast to void * when the argument is void *. Avoid cluttering of code. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Consistent malloc/calloc usageBjörn Töpel1-7/+7
Use calloc instead of malloc where it makes sense, and avoid C++-style void *-cast. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Avoid heap allocationBjörn Töpel1-5/+4
The data variable is only used locally. Instead of using the heap, stick to using the stack. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Define local variables at the beginning of a blockBjörn Töpel1-5/+7
Use C89 rules for variable definition. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Change type from void * to struct generic_data *Björn Töpel1-4/+4
Instead of casting from void *, let us use the actual type in gen_udp_hdr(). Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Change type from void * to struct ifaceconfigobj *Björn Töpel1-14/+14
Instead of casting from void *, let us use the actual type in init_iface_config(). Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Remove casting by introduce local variableBjörn Töpel1-13/+11
Let us use a local variable in nsswitchthread(), so we can remove a lot of casting for better readability. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Improve readability of xdpxceiver/worker_pkt_validate()Björn Töpel1-17/+12
Introduce a local variable to get rid of lot of casting. Move common code outside the if/else-clause. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-26selftests/bpf: Remove memory leakBjörn Töpel1-1/+0
The allocated entry is immediately overwritten by an assignment. Fix that. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.