aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf
AgeCommit message (Collapse)AuthorFilesLines
2020-10-19bpf: selftest: Ensure the return value of bpf_skc_to helpers must be checkedMartin KaFai Lau1-0/+25
This patch tests: int bpf_cls(struct __sk_buff *skb) { /* REG_6: sk * REG_7: tp * REG_8: req_sk */ sk = skb->sk; if (!sk) return 0; tp = bpf_skc_to_tcp_sock(sk); req_sk = bpf_skc_to_tcp_request_sock(sk); if (!req_sk) return 0; /* !tp has not been tested, so verifier should reject. */ return *(__u8 *)tp; } Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-15bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to loMartin KaFai Lau2-26/+2
The tcp_hdr_options test adds a "::eB9F" addr to the lo dev. However, this non loopback address will have a race on ipv6 dad which may lead to EADDRNOTAVAIL error from time to time. Even nodad is used in the iproute2 command, there is still a race in when the route will be added. This will then lead to ENETUNREACH from time to time. To avoid the above, this patch uses the default loopback address "::1" to do the test. Fixes: ad2f8eb0095e ("bpf: selftests: Tcp header options") Reported-by: Andrii Nakryiko <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-15bpf: Fix register equivalence tracking.Alexei Starovoitov1-0/+26
The 64-bit JEQ/JNE handling in reg_set_min_max() was clearing reg->id in either true or false branch. In the case 'if (reg->id)' check was done on the other branch the counter part register would have reg->id == 0 when called into find_equal_scalars(). In such case the helper would incorrectly identify other registers with id == 0 as equivalent and propagate the state incorrectly. Fix it by preserving ID across reg_set_min_max(). In other words any kind of comparison operator on the scalar register should preserve its ID to recognize: r1 = r2 if (r1 == 20) { #1 here both r1 and r2 == 20 } else if (r2 < 20) { #2 here both r1 and r2 < 20 } The patch is addressing #1 case. The #2 was working correctly already. Fixes: 75748837b7e5 ("bpf: Propagate scalar ranges through register assignments.") Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Tested-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-11bpf, selftests: Add three new sockmap tests for verdict only programsJohn Fastabend1-1/+18
Here we add three new tests for sockmap to test having a verdict program without setting the parser program. The first test covers the most simply case, sender proxy_recv proxy_send recv | | | | verdict -----+ | | | | | +----------------+ +------------+ We load the verdict program on the proxy_recv socket without a parser program. It then does a redirect into the send path of the proxy_send socket using sendpage_locked(). Next we test the drop case to ensure if we kfree_skb as a result of the verdict program everything behaves as expected. Next we test the same configuration above, but with ktls and a redirect into socket ingress queue. Shown here tls tls sender proxy_recv proxy_send recv | | | | verdict ------------------+ | | redirect_ingress +----------------+ Also to set up ping/pong test Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/160239302638.8495.17125996694402793471.stgit@john-Precision-5820-Tower
2020-10-11bpf, selftests: Add option to test_sockmap to omit adding parser programJohn Fastabend1-14/+21
Add option to allow running without a parser program in place. To test with ping/pong program use, # test_sockmap -t ping --txmsg_omit_skb_parser this will send packets between two socket bouncing through a proxy socket that does not use a parser program. (ping) (pong) sender proxy_recv proxy_send recv | | | | verdict -----+ | | | | | +----------------+ +------------+ Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/160239300387.8495.11908295143121563076.stgit@john-Precision-5820-Tower
2020-10-11bpf, selftests: Add redirect_peer selftestDaniel Borkmann2-9/+61
Extend the test_tc_redirect test and add a small test that exercises the new redirect_peer() helper for the IPv4 and IPv6 case. Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-11bpf, selftests: Make redirect_neigh test more extensibleDaniel Borkmann3-186/+219
Rename into test_tc_redirect.sh and move setup and test code into separate functions so they can be reused for newly added tests in here. Also remove the crude hack to override ifindex inside the object file via xxd and sed and just use a simple map instead. Map given iproute2 does not support BTF fully and therefore neither global data at this point. Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-11bpf, selftests: Add test for different array inner map sizeDaniel Borkmann2-10/+72
Extend the "diff_size" subtest to also include a non-inlined array map variant where dynamic inner #elems are possible. Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-09selftests/bpf: Asm tests for the verifier regalloc tracking.Alexei Starovoitov1-0/+243
Add asm tests for register allocator tracking logic. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-09selftests/bpf: Add profiler testAlexei Starovoitov7-0/+1274
The main purpose of the profiler test to check different llvm generation patterns to make sure the verifier can load these large programs. Note that profiler.inc.h test doesn't follow strict kernel coding style. The code was formatted in the kernel style, but variable declarations are kept as-is to preserve original llvm IR pattern. profiler1.c should pass with older and newer llvm profiler[23].c may fail on older llvm that don't have: https://reviews.llvm.org/D85570 because llvm may do speculative code motion optimization that will generate code like this: // r9 is a pointer to map_value // r7 is a scalar 17: bf 96 00 00 00 00 00 00 r6 = r9 18: 0f 76 00 00 00 00 00 00 r6 += r7 19: a5 07 01 00 01 01 00 00 if r7 < 257 goto +1 20: bf 96 00 00 00 00 00 00 r6 = r9 // r6 is used here The verifier will reject such code with the error: "math between map_value pointer and register with unbounded min value is not allowed" At insn 18 the r7 is indeed unbounded. The later insn 19 checks the bounds and the insn 20 undoes map_value addition. It is currently impossible for the verifier to understand such speculative pointer arithmetic. Hence llvm D85570 addresses it on the compiler side. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-09bpf: Propagate scalar ranges through register assignments.Alexei Starovoitov2-9/+9
The llvm register allocator may use two different registers representing the same virtual register. In such case the following pattern can be observed: 1047: (bf) r9 = r6 1048: (a5) if r6 < 0x1000 goto pc+1 1050: ... 1051: (a5) if r9 < 0x2 goto pc+66 1052: ... 1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */ This is normal behavior of greedy register allocator. The slides 137+ explain why regalloc introduces such register copy: http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf There is no way to tell llvm 'not to do this'. Hence the verifier has to recognize such patterns. In order to track this information without backtracking allocate ID for scalars in a similar way as it's done for find_good_pkt_pointers(). When the verifier encounters r9 = r6 assignment it will assign the same ID to both registers. Later if either register range is narrowed via conditional jump propagate the register state into the other register. Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The register ID is ignored for scalars in regsafe() and doesn't affect state pruning. mark_reg_unknown() clears the ID. It's used to process call, endian and other instructions. Hence ID is explicitly cleared only in adjust_reg_min_max_vals() and in 32-bit mov. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-09bpf: Add tcp_notsent_lowat bpf setsockoptNikita V. Shirokov1-0/+19
Adding support for TCP_NOTSENT_LOWAT sockoption (https://lwn.net/Articles/560082/) in tcp bpf programs. Signed-off-by: Nikita V. Shirokov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-09kbuild: explicitly specify the build id styleBill Wendling1-1/+1
ld's --build-id defaults to "sha1" style, while lld defaults to "fast". The build IDs are very different between the two, which may confuse programs that reference them. Signed-off-by: Bill Wendling <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-10-07selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructionsAndrii Nakryiko2-0/+397
Add selftests validating libbpf's auto-resizing of load/store instructions when used with CO-RE relocations. An explicit and manual approach with using bpf_core_read() is also demonstrated and tested. Separate BPF program is supposed to fail due to using signed integers of sizes that differ from kernel's sizes. To reliably simulate 32-bit BTF (i.e., the one with sizeof(long) == sizeof(void *) == 4), selftest generates its own custom BTF and passes it as a replacement for real kernel BTF. This allows to test 32/64-bitness mix on all architectures. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-06selftests/bpf: Fix test_verifier after introducing resolve_pseudo_ldimm64Hao Luo2-9/+1
Commit 4976b718c355 ("bpf: Introduce pseudo_btf_id") switched the order of check_subprogs() and resolve_pseudo_ldimm() in the verifier. Now an empty prog expects to see the error "last insn is not an the prog of a single invalid ldimm exit or jmp" instead, because the check for subprogs comes first. It's now pointless to validate that half of ldimm64 won't be the last instruction. Tested: # ./test_verifier Summary: 1129 PASSED, 537 SKIPPED, 0 FAILED and the full set of bpf selftests. Fixes: 4976b718c355 ("bpf: Introduce pseudo_btf_id") Signed-off-by: Hao Luo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-06selftest/bpf: Test pinning map with reused map fdHangbin Liu1-1/+48
This add a test to make sure that we can still pin maps with reused map fd. Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-02bpf, sockmap: Update selftests to use skb_adjust_roomJohn Fastabend2-30/+31
Instead of working around TLS headers in sockmap selftests use the new skb_adjust_room helper. This allows us to avoid special casing the receive side to skip headers. Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/160160100932.7052.3646935243867660528.stgit@john-Precision-5820-Tower
2020-10-02bpf/selftests: Test for bpf_per_cpu_ptr() and bpf_this_cpu_ptr()Hao Luo2-0/+50
Test bpf_per_cpu_ptr() and bpf_this_cpu_ptr(). Test two paths in the kernel. If the base pointer points to a struct, the returned reg is of type PTR_TO_BTF_ID. Direct pointer dereference can be applied on the returned variable. If the base pointer isn't a struct, the returned reg is of type PTR_TO_MEM, which also supports direct pointer dereference. Signed-off-by: Hao Luo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-02selftests/bpf: Ksyms_btf to test typed ksymsHao Luo5-25/+137
Selftests for typed ksyms. Tests two types of ksyms: one is a struct, the other is a plain int. This tests two paths in the kernel. Struct ksyms will be converted into PTR_TO_BTF_ID by the verifier while int typed ksyms will be converted into PTR_TO_MEM. Signed-off-by: Hao Luo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-02bpf: selftest: Ensure the child sk inherited all bpf_sock_ops_cb_flagsMartin KaFai Lau4-6/+22
This patch adds a test to ensure the child sk inherited everything from the bpf_sock_ops_cb_flags of the listen sk: 1. Sets one more cb_flags (BPF_SOCK_OPS_STATE_CB_FLAG) to the listen sk in test_tcp_hdr_options.c 2. Saves the skops->bpf_sock_ops_cb_flags when handling the newly established passive connection 3. CHECK() it is the same as the listen sk This also covers the fastopen case as the existing test_tcp_hdr_options.c does. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-02selftests/bpf: Properly initialize linfo in sockmap_basicStanislav Fomichev1-1/+1
When using -Werror=missing-braces, compiler complains about missing braces. Let's use use ={} initialization which should do the job: tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function 'test_sockmap_iter': tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:181:8: error: missing braces around initializer [-Werror=missing-braces] union bpf_iter_link_info linfo = {0}; ^ tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:181:8: error: (near initialization for 'linfo.map') [-Werror=missing-braces] tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: At top level: Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-10-02selftests/bpf: Initialize duration in xdp_noinline.cStanislav Fomichev1-1/+1
Fixes clang error: tools/testing/selftests/bpf/prog_tests/xdp_noinline.c:35:6: error: variable 'duration' is uninitialized when used here [-Werror,-Wuninitialized] if (CHECK(!skel, "skel_open_and_load", "failed\n")) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-30selftests/bpf: Add tests for BPF_F_PRESERVE_ELEMSSong Liu2-0/+104
Add tests for perf event array with and without BPF_F_PRESERVE_ELEMS. Add a perf event to array via fd mfd. Without BPF_F_PRESERVE_ELEMS, the perf event is removed when mfd is closed. With BPF_F_PRESERVE_ELEMS, the perf event is removed when the map is freed. Signed-off-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-30selftests/bpf: Fix alignment of .BTF_idsJean-Philippe Brucker1-0/+6
Fix a build failure on arm64, due to missing alignment information for the .BTF_ids section: resolve_btfids.test.o: in function `test_resolve_btfids': tools/testing/selftests/bpf/prog_tests/resolve_btfids.c:140:(.text+0x29c): relocation truncated to fit: R_AARCH64_LDST32_ABS_LO12_NC against `.BTF_ids' ld: tools/testing/selftests/bpf/prog_tests/resolve_btfids.c:140: warning: one possible cause of this error is that the symbol is being referenced in the indicated code as if it had a larger alignment than was declared where it was defined In vmlinux, the .BTF_ids section is aligned to 4 bytes by vmlinux.lds.h. In test_progs however, .BTF_ids doesn't have alignment constraints. The arm64 linker expects the btf_id_set.cnt symbol, a u32, to be naturally aligned but finds it misaligned and cannot apply the relocation. Enforce alignment of .BTF_ids to 4 bytes. Fixes: cd04b04de119 ("selftests/bpf: Add set test to resolve_btfids") Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-30selftests/bpf: Test "incremental" btf_dump in C formatAndrii Nakryiko1-0/+105
Add test validating that btf_dump works fine with BTFs that are modified and incrementally generated. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-30bpf, selftests: Add redirect_neigh selftestDaniel Borkmann2-0/+312
Add a small test that exercises the new redirect_neigh() helper for the IPv4 and IPv6 case. Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/0fc7d9c5f9a6cc1c65b0d3be83b44b1ec9889f43.1601477936.git.daniel@iogearbox.net
2020-09-30bpf, selftests: Use bpf_tail_call_static where appropriateDaniel Borkmann8-40/+40
For those locations where we use an immediate tail call map index use the newly added bpf_tail_call_static() helper. Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/3cfb2b799a62d22c6e7ae5897c23940bdcc24cbc.1601477936.git.daniel@iogearbox.net
2020-09-29selftests/bpf: Fix endianness issues in sk_lookup/ctx_narrow_accessIlya Leoshkevich1-115/+101
This test makes a lot of narrow load checks while assuming little endian architecture, and therefore fails on s390. Fix by introducing LSB and LSW macros and using them to perform narrow loads. Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point") Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29bpf, selftests: Fix warning in snprintf_btf where system() call uncheckedJohn Fastabend1-1/+3
On my systems system() calls are marked with warn_unused_result apparently. So without error checking we get this warning, ./prog_tests/snprintf_btf.c:30:9: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result[-Wunused-result] Also it seems like a good idea to check the return value anyways to ensure ping exists even if its seems unlikely. Fixes: 076a95f5aff2c ("selftests/bpf: Add bpf_snprintf_btf helper tests") Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/160141006897.25201.12095049414156293265.stgit@john-Precision-5820-Tower
2020-09-29selftests: Add selftest for disallowing modify_return attachment to freplaceToke Høiland-Jørgensen3-1/+71
This adds a selftest that ensures that modify_return tracing programs cannot be attached to freplace programs. The security_ prefix is added to the freplace program because that would otherwise let it pass the check for modify_return. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests/bpf: Adding test for arg dereference in extension traceJiri Olsa3-0/+154
Adding test that setup following program: SEC("classifier/test_pkt_md_access") int test_pkt_md_access(struct __sk_buff *skb) with its extension: SEC("freplace/test_pkt_md_access") int test_pkt_md_access_new(struct __sk_buff *skb) and tracing that extension with: SEC("fentry/test_pkt_md_access_new") int BPF_PROG(fentry, struct sk_buff *skb) The test verifies that the tracing program can dereference skb argument properly. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests: Add test for multiple attachments of freplace programToke Høiland-Jørgensen2-32/+139
This adds a selftest for attaching an freplace program to multiple targets simultaneously. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests/bpf: Test BTF's handling of endiannessAndrii Nakryiko1-0/+101
Add selftests juggling endianness back and forth to validate BTF's handling of endianness convertions internally. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests/bpf: Move and extend ASSERT_xxx() testing macrosAndrii Nakryiko2-34/+63
Move existing ASSERT_xxx() macros out of btf_write selftest into test_progs.h to use across all selftests. Also expand a set of macros for typical cases. Now there are the following macros: - ASSERT_EQ() -- check for equality of two integers; - ASSERT_STREQ() -- check for equality of two C strings; - ASSERT_OK() -- check for successful (zero) return result; - ASSERT_ERR() -- check for unsuccessful (non-zero) return result; - ASSERT_NULL() -- check for NULL pointer; - ASSERT_OK_PTR() -- check for a valid pointer; - ASSERT_ERR_PTR() -- check for NULL or negative error encoded in a pointer. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests: Make sure all 'skel' variables are declared staticToke Høiland-Jørgensen2-2/+2
If programs in prog_tests using skeletons declare the 'skel' variable as global but not static, that will lead to linker errors on the final link of the prog_tests binary due to duplicate symbols. Fix a few instances of this. Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables") Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress") Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests/bpf_iter: Don't fail test due to missing __builtin_btf_type_idToke Høiland-Jørgensen1-3/+9
The new test for task iteration in bpf_iter checks (in do_btf_read()) if it should be skipped due to missing __builtin_btf_type_id. However, this 'skip' verdict is not propagated to the caller, so the parent test will still fail. Fix this by also skipping the rest of the parent test if the skip condition was reached. Fixes: b72091bd4ee4 ("selftests/bpf: Add test for bpf_seq_printf_btf helper") Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests/bpf: Ensure snprintf_btf/bpf_iter tests compatibility with old ↵Alan Maguire3-1/+51
vmlinux.h Andrii reports that bpf selftests relying on "struct btf_ptr" and BTF_F_* values will not build as vmlinux.h for older kernels will not include "struct btf_ptr" or the BTF_F_* enum values. Undefine and redefine them to work around this. Fixes: b72091bd4ee4 ("selftests/bpf: Add test for bpf_seq_printf_btf helper") Fixes: 076a95f5aff2 ("selftests/bpf: Add bpf_snprintf_btf helper tests") Reported-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-29selftests/bpf: Fix unused-result warning in snprintf_btf.cAlan Maguire1-1/+1
Daniel reports: + system("ping -c 1 127.0.0.1 > /dev/null"); This generates the following new warning when compiling BPF selftests: [...] EXT-OBJ [test_progs] cgroup_helpers.o EXT-OBJ [test_progs] trace_helpers.o EXT-OBJ [test_progs] network_helpers.o EXT-OBJ [test_progs] testing_helpers.o TEST-OBJ [test_progs] snprintf_btf.test.o /root/bpf-next/tools/testing/selftests/bpf/prog_tests/snprintf_btf.c: In function ‘test_snprintf_btf’: /root/bpf-next/tools/testing/selftests/bpf/prog_tests/snprintf_btf.c:30:2: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result] system("ping -c 1 127.0.0.1 > /dev/null"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [...] Fixes: 076a95f5aff2 ("selftests/bpf: Add bpf_snprintf_btf helper tests") Reported-by: Daniel Borkmann <[email protected]> Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28bpf, selftests: Fix cast to smaller integer type 'int' warning in raw_tpJohn Fastabend1-1/+1
Fix warning in bpf selftests, progs/test_raw_tp_test_run.c:18:10: warning: cast to smaller integer type 'int' from 'struct task_struct *' [-Wpointer-to-int-cast] Change int type cast to long to fix. Discovered with gcc-9 and llvm-11+ where llvm was recent main branch. Fixes: 09d8ad16885ee ("selftests/bpf: Add raw_tp_test_run") Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/160134424745.11199.13841922833336698133.stgit@john-Precision-5820-Tower
2020-09-28selftests/bpf: Test BTF writing APIsAndrii Nakryiko1-0/+278
Add selftests for BTF writer APIs. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests/bpf: Add test for bpf_seq_printf_btf helperAlan Maguire2-0/+124
Add a test verifying iterating over tasks and displaying BTF representation of task_struct succeeds. Suggested-by: Alexei Starovoitov <[email protected]> Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests/bpf: Fix overflow tests to reflect iter size increaseAlan Maguire1-7/+7
bpf iter size increase to PAGE_SIZE << 3 means overflow tests assuming page size need to be bumped also. Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests/bpf: Add bpf_snprintf_btf helper testsAlan Maguire2-0/+309
Tests verifying snprintf()ing of various data structures, flags combinations using a tp_btf program. Tests are skipped if __builtin_btf_type_id is not available to retrieve BTF type ids. Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests: Remove fmod_ret from test_overheadToke Høiland-Jørgensen4-39/+1
The test_overhead prog_test included an fmod_ret program that attached to __set_task_comm() in the kernel. However, this function was never listed as allowed for return modification, so this only worked because of the verifier skipping tests when a trampoline already existed for the attach point. Now that the verifier checks have been fixed, remove fmod_ret from the test so it works again. Fixes: 4eaf0b5c5e04 ("selftest/bpf: Fmod_ret prog and implement test_overhead as part of bench") Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2020-09-28selftest: bpf: Test copying a sockmap and sockhashLorenz Bauer2-11/+30
Since we can now call map_update_elem(sockmap) from bpf_iter context it's possible to copy a sockmap or sockhash in the kernel. Add a selftest which exercises this. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests: bpf: Remove shared header from sockmap iter testLorenz Bauer3-24/+20
The shared header to define SOCKMAP_MAX_ENTRIES is a bit overkill. Dynamically allocate the sock_fd array based on bpf_map__max_entries instead. Suggested-by: Yonghong Song <[email protected]> Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests: bpf: Add helper to compare socket cookiesLorenz Bauer1-14/+36
We compare socket cookies to ensure that insertion into a sockmap worked. Pull this out into a helper function for use in other tests. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-28selftests/bpf: Add raw_tp_test_runSong Liu2-0/+120
This test runs test_run for raw_tracepoint program. The test covers ctx input, retval output, and running on correct cpu. Signed-off-by: Song Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-25bpf: Add AND verifier test case where 32bit and 64bit bounds differJohn Fastabend1-0/+16
If we AND two values together that are known in the 32bit subregs, but not known in the 64bit registers we rely on the tnum value to report the 32bit subreg is known. And do not use mark_reg_known() directly from scalar32_min_max_and() Add an AND test to cover the case with known 32bit subreg, but unknown 64bit reg. Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2020-09-25bpf: selftest: Add test_btf_skc_cls_ingressMartin KaFai Lau3-0/+413
This patch attaches a classifier prog to the ingress filter. It exercises the following helpers with different socket pointer types in different logical branches: 1. bpf_sk_release() 2. bpf_sk_assign() 3. bpf_skc_to_tcp_request_sock(), bpf_skc_to_tcp_sock() 4. bpf_tcp_gen_syncookie, bpf_tcp_check_syncookie Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.