aboutsummaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf/progs
AgeCommit message (Collapse)AuthorFilesLines
2019-07-30selftests/bpf: add test for bpf_tcp_gen_syncookiePetar Penkov1-5/+43
Modify the existing bpf_tcp_check_syncookie test to also generate a SYN cookie, pass the packet to the kernel, and verify that the two cookies are the same (and both valid). Since cloned SKBs are skipped during generic XDP, this test does not issue a SYN cookie when run in XDP mode. We therefore only check that a valid SYN cookie was issued at the TC hook. Additionally, verify that the MSS for that SYN cookie is within expected range. Signed-off-by: Petar Penkov <[email protected]> Reviewed-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-07-25selftests/bpf: support BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAPStanislav Fomichev1-0/+8
Exit as soon as we found that packet is encapped when BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP is passed. Add appropriate selftest cases. v2: * Subtract sizeof(struct iphdr) from .iph_inner.tot_len (Willem de Bruijn) Acked-by: Petar Penkov <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Song Liu <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Petar Penkov <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-07-25bpf/flow_dissector: support ipv6 flow_label and ↵Stanislav Fomichev1-0/+10
BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL Add support for exporting ipv6 flow label via bpf_flow_keys. Export flow label from bpf_flow.c and also return early when BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL is passed. Acked-by: Petar Penkov <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Song Liu <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Petar Penkov <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-07-25selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAGStanislav Fomichev1-6/+23
bpf_flow.c: exit early unless BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG is passed in flags. Also, set ip_proto earlier, this makes sure we have correct value with fragmented packets. Add selftest cases to test ipv4/ipv6 fragments and skip eth_get_headlen tests that don't have BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG flag. eth_get_headlen calls flow dissector with BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG flag so we can't run tests that have different set of input flags against it. v2: * sefltests -> selftests (Willem de Bruijn) * Reword a comment about eth_get_headlen flags (Song Liu) Acked-by: Petar Penkov <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Song Liu <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Petar Penkov <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-07-23selftests/bpf: convert test_get_stack_raw_tp to perf_buffer APIAndrii Nakryiko1-1/+1
Convert test_get_stack_raw_tp test to new perf_buffer API. Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-07-22selftests/bpf: fix sendmsg6_prog on s390Ilya Leoshkevich1-2/+1
"sendmsg6: rewrite IP & port (C)" fails on s390, because the code in sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to leading IPv6 address digits, which is not the case on big-endian machines. Since checking bitwise operations doesn't seem to be the point of the test, replace two short comparisons with a single int comparison. Signed-off-by: Ilya Leoshkevich <[email protected]> Acked-by: Andrey Ignatov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-18selftests/bpf: fix test_xdp_noinline on s390Ilya Leoshkevich1-8/+9
test_xdp_noinline fails on s390 due to a handful of endianness issues. Use ntohs for parsing eth_proto. Replace bswaps with ntohs/htons. Signed-off-by: Ilya Leoshkevich <[email protected]> Acked-by: Vasily Gorbik <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-07-15selftests/bpf: use typedef'ed arrays as map valuesAndrii Nakryiko3-4/+4
Convert few tests that couldn't use typedef'ed arrays due to kernel bug. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-12selftests/bpf: fix compiling loop{1, 2, 3}.c on s390Ilya Leoshkevich3-3/+3
Use PT_REGS_RC(ctx) instead of ctx->rax, which is not present on s390. Signed-off-by: Ilya Leoshkevich <[email protected]> Reviewed-by: Stanislav Fomichev <[email protected]> Tested-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+6
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <[email protected]>
2019-07-08selftests/bpf: fix test_attach_probe map definitionAndrii Nakryiko1-8/+5
ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") changed BTF-defined maps syntax, while independently merged 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") added new test using outdated syntax of maps. This patch fixes this test after corresponding patch sets were merged. Fixes: ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-08selftests/bpf: test perf buffer APIAndrii Nakryiko1-0/+25
Add test verifying perf buffer API functionality. Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-05selftests/bpf: convert legacy BPF maps to BTF-defined onesAndrii Nakryiko9-166/+158
Convert selftests that were originally left out and new ones added recently to consistently use BTF-defined maps. Reported-by: kernel test robot <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-05selftests/bpf: convert selftests using BTF-defined maps to new syntaxAndrii Nakryiko20-494/+300
Convert all the existing selftests that are already using BTF-defined maps to use new syntax (with no static data initialization). Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-05selftests/bpf: add kprobe/uprobe selftestsAndrii Nakryiko1-0/+55
Add tests verifying kprobe/kretprobe/uprobe/uretprobe APIs work as expected. Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Stanislav Fomichev <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-03selftests/bpf: test BPF_SOCK_OPS_RTT_CBStanislav Fomichev1-0/+61
Make sure the callback is invoked for syn-ack and data packet. Cc: Eric Dumazet <[email protected]> Cc: Priyaranjan Jha <[email protected]> Cc: Yuchung Cheng <[email protected]> Cc: Soheil Hassas Yeganeh <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Acked-by: Yuchung Cheng <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-03selftests: bpf: fix inlines in test_lwt_seg6localJiri Benc1-6/+6
Selftests are reporting this failure in test_lwt_seg6local.sh: + ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2 Error fetching program/map! Failed to parse eBPF program: Operation not permitted The problem is __attribute__((always_inline)) alone is not enough to prevent clang from inserting those functions in .text. In that case, .text is not marked as relocateable. See the output of objdump -h test_lwt_seg6local.o: Idx Name Size VMA LMA File off Algn 0 .text 00003530 0000000000000000 0000000000000000 00000040 2**3 CONTENTS, ALLOC, LOAD, READONLY, CODE This causes the iproute bpf loader to fail in bpf_fetch_prog_sec: bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no relocateable .text section in the file. To fix this, convert to 'static __always_inline'. v2: Use 'static __always_inline' instead of 'static inline __attribute__((always_inline))' Fixes: c99a84eac026 ("selftests/bpf: test for seg6local End.BPF action") Signed-off-by: Jiri Benc <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-07-03selftests: bpf: standardize to static __always_inlineJiri Benc5-35/+38
The progs for bpf selftests use several different notations to force function inlining. Standardize to what most of them use, static __always_inline. Suggested-by: Song Liu <[email protected]> Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-27selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTIStanislav Fomichev1-0/+71
sockopt test that verifies chaining behavior. v9: * setsockopt chaining example v7: * rework the test to verify cgroup getsockopt chaining Cc: Andrii Nakryiko <[email protected]> Cc: Martin Lau <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-06-27selftests/bpf: add sockopt test that exercises sk helpersStanislav Fomichev1-0/+111
socktop test that introduces new SOL_CUSTOM sockopt level and stores whatever users sets in sk storage. Whenever getsockopt is called, the original value is retrieved. v9: * SO_SNDBUF example to override user-supplied buffer v7: * use retval=0 and optlen-1 v6: * test 'ret=1' use-case as well (Alexei Starovoitov) v4: * don't call bpf_sk_fullsock helper v3: * drop (__u8 *)(long) casts for optval{,_end} v2: * new test Cc: Andrii Nakryiko <[email protected]> Cc: Martin Lau <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-06-24selftests, bpf: Add test for veth native XDPToshiaki Makita2-0/+43
Add a test case for veth native XDP. It checks if XDP_PASS, XDP_TX and XDP_REDIRECT work properly. $ cd tools/testing/selftests/bpf $ make \ TEST_CUSTOM_PROGS= \ TEST_GEN_PROGS= \ TEST_GEN_PROGS_EXTENDED= \ TEST_PROGS_EXTENDED= \ TEST_PROGS="test_xdp_veth.sh" \ run_tests TAP version 13 1..1 # selftests: bpf: test_xdp_veth.sh # PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data. # 64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.073 ms # # --- 10.1.1.33 ping statistics --- # 1 packets transmitted, 1 received, 0% packet loss, time 0ms # rtt min/avg/max/mdev = 0.073/0.073/0.073/0.000 ms # selftests: xdp_veth [PASS] ok 1 selftests: bpf: test_xdp_veth.sh Signed-off-by: Toshiaki Makita <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller38-230/+1766
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-06-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin. 2) BTF based map definition, from Andrii. 3) support bpf_map_lookup_elem for xskmap, from Jonathan. 4) bounded loops and scalar precision logic in the verifier, from Alexei. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-06-19selftests/bpf: add realistic loop testsAlexei Starovoitov14-1/+1291
Add a bunch of loop tests. Most of them are created by replacing '#pragma unroll' with '#pragma clang loop unroll(disable)' Several tests are artificially large: /* partial unroll. llvm will unroll loop ~150 times. * C loop count -> 600. * Asm loop count -> 4. * 16k insns in loop body. * Total of 5 such loops. Total program size ~82k insns. */ "./pyperf600.o", /* no unroll at all. * C loop count -> 600. * ASM loop count -> 600. * ~110 insns in loop body. * Total of 5 such loops. Total program size ~1500 insns. */ "./pyperf600_nounroll.o", /* partial unroll. 19k insn in a loop. * Total program size 20.8k insn. * ~350k processed_insns */ "./strobemeta.o", Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-18selftests/bpf: convert tests w/ custom values to BTF-defined mapsAndrii Nakryiko14-140/+285
Convert a bulk of selftests that have maps with custom (not integer) key and/or value. Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-18selftests/bpf: switch BPF_ANNOTATE_KV_PAIR tests to BTF-defined mapsAndrii Nakryiko5-72/+87
Switch tests that already rely on BTF to BTF-defined map definitions. Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-18selftests/bpf: add test for BTF-defined mapsAndrii Nakryiko1-0/+73
Add file test for BTF-defined map definition. Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-15selftests/bpf: convert socket_cookie test to sk storageStanislav Fomichev1-17/+29
This lets us test that both BPF_PROG_TYPE_CGROUP_SOCK_ADDR and BPF_PROG_TYPE_SOCK_OPS can access underlying bpf_sock. Cc: Martin Lau <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-11selftests/bpf: remove bpf_util.h from BPF C progsHechao Li4-4/+5
Though currently there is no problem including bpf_util.h in kernel space BPF C programs, in next patch in this stack, I will reuse libbpf_num_possible_cpus() in bpf_util.h thus include libbpf.h in it, which will cause BPF C programs compile error. Therefore I will first remove bpf_util.h from all test BPF programs. This can also make it clear that bpf_util.h is a user-space utility while bpf_helpers.h is a kernel space utility. Signed-off-by: Hechao Li <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-12/+3
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <[email protected]>
2019-05-31selftests/bpf: measure RTT from xdp using xdpingAlan Maguire1-0/+184
xdping allows us to get latency estimates from XDP. Output looks like this: ./xdping -I eth4 192.168.55.8 Setting up XDP for eth4, please wait... XDP setup disrupts network connectivity, hit Ctrl+C to quit Normal ping RTT data [Ignore final RTT; it is distorted by XDP using the reply] PING 192.168.55.8 (192.168.55.8) from 192.168.55.7 eth4: 56(84) bytes of data. 64 bytes from 192.168.55.8: icmp_seq=1 ttl=64 time=0.302 ms 64 bytes from 192.168.55.8: icmp_seq=2 ttl=64 time=0.208 ms 64 bytes from 192.168.55.8: icmp_seq=3 ttl=64 time=0.163 ms 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.275 ms 4 packets transmitted, 4 received, 0% packet loss, time 3079ms rtt min/avg/max/mdev = 0.163/0.237/0.302/0.054 ms XDP RTT data: 64 bytes from 192.168.55.8: icmp_seq=5 ttl=64 time=0.02808 ms 64 bytes from 192.168.55.8: icmp_seq=6 ttl=64 time=0.02804 ms 64 bytes from 192.168.55.8: icmp_seq=7 ttl=64 time=0.02815 ms 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.02805 ms The xdping program loads the associated xdping_kern.o BPF program and attaches it to the specified interface. If run in client mode (the default), it will add a map entry keyed by the target IP address; this map will store RTT measurements, current sequence number etc. Finally in client mode the ping command is executed, and the xdping BPF program will use the last ICMP reply, reformulate it as an ICMP request with the next sequence number and XDP_TX it. After the reply to that request is received we can measure RTT and repeat until the desired number of measurements is made. This is why the sequence numbers in the normal ping are 1, 2, 3 and 8. We XDP_TX a modified version of ICMP reply 4 and keep doing this until we get the 4 replies we need; hence the networking stack only sees reply 8, where we have XDP_PASSed it upstream since we are done. In server mode (-s), xdping simply takes ICMP requests and replies to them in XDP rather than passing the request up to the networking stack. No map entry is required. xdping can be run in native XDP mode (the default, or specified via -N) or in skb mode (-S). A test program test_xdping.sh exercises some of these options. Note that native XDP does not seem to XDP_TX for veths, hence -N is not tested. Looking at the code, it looks like XDP_TX is supported so I'm not sure if that's expected. Running xdping in native mode for ixgbe as both client and server works fine. Changes since v4 - close fds on cleanup (Song Liu) Changes since v3 - fixed seq to be __be16 (Song Liu) - fixed fd checks in xdping.c (Song Liu) Changes since v2 - updated commit message to explain why seq number of last ICMP reply is 8 not 4 (Song Liu) - updated types of seq number, raddr and eliminated csum variable in xdpclient/xdpserver functions as it was not needed (Song Liu) - added XDPING_DEFAULT_COUNT definition and usage specification of default/max counts (Song Liu) Changes since v1 - moved from RFC to PATCH - removed unused variable in ipv4_csum() (Song Liu) - refactored ICMP checks into icmp_check() function called by client and server programs and reworked client and server programs due to lack of shared code (Song Liu) - added checks to ensure that SKB and native mode are not requested together (Song Liu) Signed-off-by: Alan Maguire <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206Thomas Gleixner3-12/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Reviewed-by: Richard Fontana <[email protected]> Reviewed-by: Steve Winslow <[email protected]> Reviewed-by: Alexios Zavras <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-24tools/bpf: add selftest in test_progs for bpf_send_signal() helperYonghong Song1-0/+51
The test covered both nmi and tracepoint perf events. $ ./test_progs ... test_send_signal_tracepoint:PASS:tracepoint 0 nsec ... test_send_signal_common:PASS:tracepoint 0 nsec ... test_send_signal_common:PASS:perf_event 0 nsec ... test_send_signal:OK Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-05-24selftests/bpf: add btf_dump BTF-to-C conversion testsAndrii Nakryiko7-0/+678
Add new test_btf_dump set of tests, validating BTF-to-C conversion correctness. Tests rely on clang to generate BTF from provided C test cases. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-05-24selftests: bpf: Move bpf_printk to bpf_helpers.hMichal Rostecki5-35/+0
bpf_printk is a macro which is commonly used to print out debug messages in BPF programs and it was copied in many selftests and samples. Since all of them include bpf_helpers.h, this change moves the macro there. Signed-off-by: Michal Rostecki <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-05-23selftests/bpf: add pyperf scale testAlexei Starovoitov4-0/+280
Add a snippet of pyperf bpf program used to collect python stack traces as a scale test for the verifier. At 189 loop iterations llvm 9.0 starts ignoring '#pragma unroll' and generates partially unrolled loop instead. Hence use 50, 100, and 180 loop iterations to stress test. Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-27bpf: Add ene-to-end test for bpf_sk_storage_* helpersMartin KaFai Lau1-0/+53
This patch rides on an existing BPF_PROG_TYPE_CGROUP_SKB test (test_sock_fields.c) to do a TCP end-to-end test on the new bpf_sk_storage_* helpers. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-24selftests/bpf: expand test_tc_tunnel with SIT encapWillem de Bruijn1-4/+60
So far, all BPF tc tunnel testcases encapsulate in the same network protocol. Add an encap testcase that requires updating skb->protocol. The 6in4 tunnel encapsulates an IPv6 packet inside an IPv4 tunnel. Verify that bpf_skb_net_grow correctly updates skb->protocol to select the right protocol handler in __netif_receive_skb_core. The BPF program should also manually update the link layer header to encode the right network protocol. Changes v1->v2 - improve documentation of non-obvious logic Signed-off-by: Willem de Bruijn <[email protected]> Tested-by: Alan Maguire <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-23selftests/bpf: run flow dissector tests in skb-less modeStanislav Fomichev1-29/+50
Export last_dissection map from flow dissector and use a known place in tun driver to trigger BPF flow dissection. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-18selftests/bpf: fix compile errors due to unsync linux/in6.h and netinet/in.hWang YanQing2-2/+2
I meet below compile errors: " In file included from test_tcpnotify_kern.c:12: /usr/include/netinet/in.h:101:5: error: expected identifier IPPROTO_HOPOPTS = 0, /* IPv6 Hop-by-Hop options. */ ^ /usr/include/linux/in6.h:131:26: note: expanded from macro 'IPPROTO_HOPOPTS' ^ In file included from test_tcpnotify_kern.c:12: /usr/include/netinet/in.h:103:5: error: expected identifier IPPROTO_ROUTING = 43, /* IPv6 routing header. */ ^ /usr/include/linux/in6.h:132:26: note: expanded from macro 'IPPROTO_ROUTING' ^ In file included from test_tcpnotify_kern.c:12: /usr/include/netinet/in.h:105:5: error: expected identifier IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header. */ ^ /usr/include/linux/in6.h:133:26: note: expanded from macro 'IPPROTO_FRAGMENT' " The same compile errors are reported for test_tcpbpf_kern.c too. My environment: lsb_release -a: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.6 LTS Release: 16.04 Codename: xenial dpkg -l | grep libc-dev: ii libc-dev-bin 2.23-0ubuntu11 amd64 GNU C Library: Development binaries ii linux-libc-dev:amd64 4.4.0-145.171 amd64 Linux Kernel Headers for development. The reason is linux/in6.h and netinet/in.h aren't synchronous about how to handle the same definitions, IPPROTO_HOPOPTS, etc. This patch fixes the compile errors by moving <netinet/in.h> to before the <linux/*.h>. Signed-off-by: Wang YanQing <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-16selftests/bpf: bring back (void *) cast to set_ipv4_csum in test_tc_tunnelStanislav Fomichev1-1/+1
It was removed in commit 166b5a7f2ca3 ("selftests_bpf: extend test_tc_tunnel for UDP encap") without any explanation. Otherwise I see: progs/test_tc_tunnel.c:160:17: warning: taking address of packed member 'ip' of class or structure 'v4hdr' may result in an unaligned pointer value [-Waddress-of-packed-member] set_ipv4_csum(&h_outer.ip); ^~~~~~~~~~ 1 warning generated. Cc: Alan Maguire <[email protected]> Cc: Willem de Bruijn <[email protected]> Fixes: 166b5a7f2ca3 ("selftests_bpf: extend test_tc_tunnel for UDP encap") Signed-off-by: Stanislav Fomichev <[email protected]> Acked-by: Song Liu <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-12selftests/bpf: C based test for sysctl and strtoXAndrey Ignatov1-0/+70
Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul. Make sure that sysctl can be identified by name and that multiple integers can be parsed from sysctl value with bpf_strtoul. net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned longs, they all are parsed and compared (val[0] < val[1] < val[2]). Example of output: # ./test_sysctl ... Test case: C prog: deny all writes .. [PASS] Test case: C prog: deny access by name .. [PASS] Test case: C prog: read tcp_mem .. [PASS] Summary: 39 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller7-51/+557
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-12 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Improve BPF verifier scalability for large programs through two optimizations: i) remove verifier states that are not useful in pruning, ii) stop walking parentage chain once first LIVE_READ is seen. Combined gives approx 20x speedup. Increase limits for accepting large programs under root, and add various stress tests, from Alexei. 2) Implement global data support in BPF. This enables static global variables for .data, .rodata and .bss sections to be properly handled which allows for more natural program development. This also opens up the possibility to optimize program workflow by compiling ELFs only once and later only rewriting section data before reload, from Daniel and with test cases and libbpf refactoring from Joe. 3) Add config option to generate BTF type info for vmlinux as part of the kernel build process. DWARF debug info is converted via pahole to BTF. Latter relies on libbpf and makes use of BTF deduplication algorithm which results in 100x savings compared to DWARF data. Resulting .BTF section is typically about 2MB in size, from Andrii. 4) Add BPF verifier support for stack access with variable offset from helpers and add various test cases along with it, from Andrey. 5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header so that L2 encapsulation can be used for tc tunnels, from Alan. 6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that users can define a subset of allowed __sk_buff fields that get fed into the test program, from Stanislav. 7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up various UBSAN warnings in bpftool, from Yonghong. 8) Generate a pkg-config file for libbpf, from Luca. 9) Dump program's BTF id in bpftool, from Prashant. 10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP program, from Magnus. 11) kallsyms related fixes for the case when symbols are not present in BPF selftests and samples, from Daniel ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-11selftests_bpf: add L2 encap to test_tc_tunnelAlan Maguire1-28/+191
Update test_tc_tunnel to verify adding inner L2 header encapsulation (an MPLS label or ethernet header) works. Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-11selftests_bpf: extend test_tc_tunnel for UDP encapAlan Maguire1-42/+98
commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation and later introduced associated test_tc_tunnel tests. Here those tests are extended to cover UDP encapsulation also. Signed-off-by: Alan Maguire <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-11selftests: bpf: add selftest for __sk_buff context in BPF_PROG_TEST_RUNStanislav Fomichev1-0/+21
Simple test that sets cb to {1,2,3,4,5} and priority to 6, runs bpf program that fails if cb is not what we expect and increments cb[i] and priority. When the test finishes, we check that cb is now {2,3,4,5,6} and priority is 7. We also test the sanity checks: * ctx_in is provided, but ctx_size_in is zero (same for ctx_out/ctx_size_out) * unexpected non-zero fields in __sk_buff return EINVAL Signed-off-by: Stanislav Fomichev <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-09bpf, selftest: test global data/bss/rodata sectionsJoe Stringer1-0/+106
Add tests for libbpf relocation of static variable references into the .data, .rodata and .bss sections of the ELF, also add read-only test for .rodata. All passing: # ./test_progs [...] test_global_data:PASS:load program 0 nsec test_global_data:PASS:pass global data run 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .data reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .data reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_string:PASS:relocate .rodata reference 925 nsec test_global_data_string:PASS:relocate .data reference 925 nsec test_global_data_string:PASS:relocate .bss reference 925 nsec test_global_data_string:PASS:relocate .data reference 925 nsec test_global_data_string:PASS:relocate .bss reference 925 nsec test_global_data_struct:PASS:relocate .rodata reference 925 nsec test_global_data_struct:PASS:relocate .bss reference 925 nsec test_global_data_struct:PASS:relocate .rodata reference 925 nsec test_global_data_struct:PASS:relocate .data reference 925 nsec test_global_data_rdonly:PASS:test .rodata read-only map 925 nsec [...] Summary: 229 PASSED, 0 FAILED Note map helper signatures have been changed to avoid warnings when passing in const data. Joint work with Daniel Borkmann. Signed-off-by: Joe Stringer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-12/+7
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <[email protected]>
2019-04-04selftests/bpf: add few verifier scale testsAlexei Starovoitov4-0/+160
Add 3 basic tests that stress verifier scalability. test_verif_scale1.c calls non-inlined jhash() function 90 times on different position in the packet. This test simulates network packet parsing. jhash function is ~140 instructions and main program is ~1200 insns. test_verif_scale2.c force inlines jhash() function 90 times. This program is ~15k instructions long. test_verif_scale3.c calls non-inlined jhash() function 90 times on But this time jhash has to process 32-bytes from the packet instead of 14-bytes in tests 1 and 2. jhash function is ~230 insns and main program is ~1200 insns. $ test_progs -s can be used to see verifier stats. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-03net/flow_dissector: pass flow_keys->n_proto to BPF programsStanislav Fomichev1-2/+4
This is a preparation for the next commit that would prohibit access to the most fields of __sk_buff from the BPF programs. Instead of requiring BPF flow dissector programs to look into skb, pass all input data in the flow_keys. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-03selftests/bpf: fix vlan handling in flow dissector programStanislav Fomichev1-11/+4
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use flow_keys->n_proto, that we set in parse_eth_proto instead and properly increment nhoff as well. Also, always use skb->protocol and don't look at skb->vlan_present. skb->vlan_present indicates that vlan information is stored out-of-band in skb->vlan_{tci,proto} and vlan header is already pulled from skb. That means, skb->vlan_present == true is not relevant for BPF flow dissector. Add simple test cases with VLAN tagged frames: * single vlan for ipv4 * double vlan for ipv6 Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.