| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add basic support to parse ARM assembly.
This:
* enables perf to correctly show the disassembly, rather than chopping
some constants off at the '#' (which is not a comment character on
ARM).
* allows perf to identify ARM instructions that branch to other parts
within the same function, thereby properly annotating them.
* allows perf to identify function calls, allowing called functions to
be followed in the annotated view.
Signed-off-by: Russell King <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's more readable this way and we can save one
perf_evsel__is_group_leader condition in current code.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently we have 2 kinds of stat counters based on when the event is
enabled:
1) tracee command events, which are enable once the
tracee executes exec syscall (enable_on_exec bit)
2) all other events which get alive within the
perf_event_open syscall
And 2) case could raise a problem in case we want additional filter to
be attached for event. In this case we want the event to be enabled
after it's configured with filter.
Changing the behaviour of 2) events, so they all are created as disabled
(disabled bit). Adding extra enable call to make them alive once they
finish setup.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
No need to mimic the behaviour of perf_evlist__enable, we can use it
directly.
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use perf_evsel__(enable|disable) functions in perf_evlist__(enable|disable)
functions in order to centralize ioctl enable/disable calls. This way we
eliminate 2 places calling directly ioctl.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding perf_evsel__disable function to have complement for
perf_evsel__enable function. Both will be used in following patch to
factor perf_evlist__(enable|disable).
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
All events now share proper cpu and thread maps. There's no need to pass
those maps from evlist, it's safe to use evsel maps for enabling event.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It fixes segfault within machine__exit, that's caused
but not creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c31 perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The bpf-output is added under software events, but is not parse-able
within parse_events, which is what round trip test is expecting.
Checking software events only until dummy event.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Make it a one liner by keeping __perf_evsel__name_array_test() around ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In error path to try user space event, both cpus and threads map now
owned by evlist and freed by perf_evlist__set_maps call. Getting
reference to keep them alive.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is more straightforward than what we have now.
It also fixes a segfault within machine__exit, that's caused
by not creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c31 perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is more straightforward than what we have now.
It also fixes a segfault within machine__exit, that's caused by not
creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c31 perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is more straightforward than what we have now.
It also fixes a segfault within machine__exit, that's caused by not
creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c31 perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There's a mistake in dso__adjust_kmod_long_name() that it use strdup()
to dup the new long_name of a dso, but passes the original string to
dso__set_long_name(). Which causes random crash during cleanup.
Signed-off-by: Wang Nan <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If feed perf a symbol filter in cmdline and the result is empty,
pressing 'Enter' in the hist browser causes crash:
# ./perf report perf.data <-- Common mistake for beginners
Then press 'Enter':
perf: Segmentation fault
-------- backtrace --------
/home/wangnan/perf[0x53e578]
/lib64/libc.so.6(+0x3545f)[0x7f76bafe045f]
/home/wangnan/perf[0x539dd4]
/home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d216]
/home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
/home/wangnan/perf[0x47efa2]
/home/wangnan/perf(main+0x5f5)[0x432fa5]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7f76bafccbd4]
/home/wangnan/perf[0x4330d4]
This is because 'perf.data' is interpreted as a symbol filter, and the
result is empty, so selection is empty. However,
hist_browser__toggle_fold() forgets to check it.
This patch simply return false when selection is NULL.
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With the following steps:
Step 1: perf report
Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'
Step 3: Use '/' to filter symbols, use a filter which returns
empty result
Step 4: Press 'ENTER'
We see that, even if we have filtered all the symbols (and the main
interface is empty), pressing 'ENTER' still selects one symbol. This
behavior surprises the user.
This patch resets browser->{he_,}selection in hist_browser__refresh()
and lets it choose default selection. In this case
browser->{he_,}selection keeps NULL so user won't see annotation item in
menu.
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before this patch we can trigger a segfault by following steps:
Step 0: Use 'perf record' to generate a perf.data without callchain
Step 1: perf report
Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'
Step 3: Use '/' to filter symbols, use a filter which returns
empty result
Step 4: Press 'ENTER' (notice here that the old selection is still
there. This is another problem)
Step 5: Press 'ENTER' to annotate that symbol
Step 6: Press 'LEFT' to go out.
Result: segfault:
perf: Segmentation fault
-------- backtrace --------
/home/wangnan/perf[0x53e568]
/lib64/libc.so.6(+0x3545f)[0x7fba75d3245f]
/home/wangnan/perf[0x537516]
/home/wangnan/perf[0x533fef]
/home/wangnan/perf[0x53b347]
/home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d206]
/home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
/home/wangnan/perf[0x47efa2]
/home/wangnan/perf(main+0x5f5)[0x432fa5]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fba75d1ebd4]
/home/wangnan/perf[0x4330d4]
This is because in this case 'nd' could be NULL in
ui_browser__hists_seek(), but that function never checks it.
This patch adds checker for potential NULL pointer in that function.
After this patch the above steps won't segfault.
Signed-off-by: Wang Nan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The buildid string length is returned by perf buildid-list -k command.
Since a non-zero return value means an error, perf buildid-list -k cmd
should return 0 when successful instead.
Before:
# perf buildid-list -k
39356d74e96e02346fe0ec1f3f162b6c522bac62
# echo $?
41
After:
# perf buildid-list -k
39356d74e96e02346fe0ec1f3f162b6c522bac62
# echo $?
0
Signed-off-by: Michael Petlan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Fixes: 0b5a7935f3b5 ("perf buildid: Introduce sysfs/filename__sprintf_build_id")
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --kernel option of perf buildid-list tool should show the running
kernel buildid. The functionality has been lost during other changes of
the related code.
The build_id__sprintf() function should return length of the build-id
string, but it was the length of the build-id raw data instead. Due to
that, some return value checking caused that the final string was not
printed out.
With this patch the build_id__sprintf() returns the correct value, so
the --kernel option works again.
Before:
# perf buildid-list --kernel
#
After:
# perf buildid-list --kernel
972c1edab5bdc06cc224af45d510af662a3c6972
#
Signed-off-by: Michael Petlan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Following patches are going to introduce BPF object level configuration
to enable setting values into BPF maps. To avoid confusion, this patch
renames existing 'config' in bpf-loader.c to 'program config'. Following
patches would introduce 'object config'.
Signed-off-by: Wang Nan <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When perf report on TUI was called with -S symbol filter, it should
update nr entries even if min_pcnt is 0. IIRC the reason was to update
nr entries after applying minimum percent threshold. But if symbol
filter was given on command line (with -S option), it should use
hists->nr_non_filtered_entries instead of hists->nr_entries.
So this patch fixes a bug of navigating hists browser that the cursor
goes beyond the number of entries when -S (or similar) option is used.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If user gives a filter, perf marks the corresponding column elided and
omits the output. But it should process and aggregates samples using
the field, otherwise samples will be aggregated as if the column was not
there resulted in incorrect output.
For example, I'd like to set a filter on native_write_msr_safe. The
original overhead of the function is negligible.
$ perf report | grep native_write_msr_safe
0.00% swapper [kernel.vmlinux] native_write_msr_safe
0.00% perf [kernel.vmlinux] native_write_msr_safe
However adding -S option gives different output.
$ perf report -S native_write_msr_safe --percentage absolute | \
> grep -e swapper -e perf
51.47% swapper [kernel.vmlinux]
4.14% perf [kernel.vmlinux]
Since it aggregated samples using comm and dso only. In fact, the above
values are same when it sorts with -s comm,dso.
$ perf report -s comm,dso | grep -e swapper -e perf
51.47% swapper [kernel.vmlinux]
4.14% perf [kernel.vmlinux]
This resulted in TUI failure with -ERANGE since it tries to increase
sample hit count for annotation with wrong symbols due to incorrect
aggregation.
This patch fixes it not to skip elided fields when comparing samples in
order to insert them to the hists.
Commiter note:
After the patch, with a different workloads:
# perf report --show-total-period -S native_write_msr_safe --stdio
#
# symbol: native_write_msr_safe
#
# Samples: 455 of event 'cycles:pp'
# Event count (approx.): 134787489
#
# Overhead Period Command Shared Object
# ........ ...... ............... ................
#
0.22% 293081 qemu-system-x86 [vmlinux]
0.19% 255914 swapper [vmlinux]
0.00% 2054 Timer [vmlinux]
0.00% 1021 firefox [vmlinux]
0.00% 2 perf [vmlinux]
# perf report --show-total-period | grep native_write_msr_safe
Failed to open /tmp/perf-14838.map, continuing without symbols
0.22% 293081 qemu-system-x86 [vmlinux] [k] native_write_msr_safe
0.19% 255914 swapper [vmlinux] [k] native_write_msr_safe
0.00% 2054 Timer [vmlinux] [k] native_write_msr_safe
0.00% 1021 firefox [vmlinux] [k] native_write_msr_safe
0.00% 2 perf [vmlinux] [k] native_write_msr_safe
#
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently when perf fails to process samples for some reason, it doesn't
show any message about the failure. This is very inconvenient for users
especially on TUI as screen is reset after the failure.
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.
(gdb) bt
#0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
#1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
#2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
at util/parse-events.c:1615
#3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
#4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
#5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
#6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
#7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
#8 main (argc=2, argv=0x7fffffffe390) at perf.c:588
(gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
$4 = {symbol = 0x0, alias = 0x0}
(gdb)
A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: Ingo Molnar <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've
added it to tools/perf, where it is used just to list events.
This ended up causing a segfault in commands like "perf list stall".
Fix it by adding that new software counter.
A patch to robustify perf to not segfault when the next counter gets
added in the kernel will follow this one.
Reported-by: Ingo Molnar <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'perf test unwind' is failing because it forgot to create the kernel
maps, fix it.
After the patch:
# perf test unwind
40: Test dwarf unwind : Ok
Reported-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --kernel option of perf buildid-list tool should show the running
kernel buildid. The functionality has been lost during other changes of
the related code.
The build_id__sprintf() function should return length of the build-id
string, but it was the length of the build-id raw data instead. Due to
that, some return value checking caused that the final string was not
printed out.
With this patch the build_id__sprintf() returns the correct value, so
the --kernel option works again.
Before:
# perf buildid-list --kernel
#
After:
# perf buildid-list --kernel
972c1edab5bdc06cc224af45d510af662a3c6972
#
Signed-off-by: Michael Petlan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding WIEGHT bit_name call to display sample_type properly.
$ perf evlist -v
cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|ID|CPU|DATA_SRC|WEIGHT ...
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Clear sample_(type|period) for counting, as it only confuses debug
output with unwanted sampling details:
Before:
$ sudo perf stat -e 'raw_syscalls:sys_enter' -vv ls
------------------------------------------------------------
perf_event_attr:
type 2
size 112
config 0x11
{ sample_period, sample_freq } 1
sample_type TIME|CPU|PERIOD|RAW
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
After:
$ sudo perf stat -e 'raw_syscalls:sys_enter' -vv ls
------------------------------------------------------------
perf_event_attr:
type 2
size 112
config 0x11
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently when debuginfo is separated to vmlinux.debug, it's contents
get ignored. Let's change that and add it to the vmlinux_path list.
Signed-off-by: Ekaterina Tumanova <[email protected]>
Acked-by: Alexander Yarygin <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Refactor vmlinux_path__init() to ease subsequent additions of new
vmlinux locations.
Signed-off-by: Ekaterina Tumanova <[email protected]>
Acked-by: Alexander Yarygin <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Rename vmlinux_path__update() to vmlinux_path__add() ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Passing perf_script struct into process_event function, so we could
process configuration data for event printing.
It will be used in following patch to get event name string width.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When parsing /proc/xxx/maps, the sscanf in perf_event__synthesize_mmap_events
truncate the map name at the space in "/anon_hugepage (deleted)".
is_anon_memory() then only receives the string "/anon_hugepage" and does
not detect it. We change is_anon_memory() to only compare the first
part of the string, effectively ignoring if " (deleted)" is there.
Signed-off-by: Yannick Brosseau <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Joshua Zhu <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Something unexpected may happen if copy statically linked perf to a
production environment:
# ./perf probe -m ./mymodule.ko my_func
[mymodule] with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko
Error: Failed to add events.
# ./perf buildid-cache -a ./mymodule.ko
# ./perf probe -m ./mymodule.ko my_func
Added new event:
probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko)
You can now use it in all perf tools, such as:
perf record -e probe:my_func -aR sleep 1
Where:
# ldd ./perf
not a dynamic executable
# strace -e open ./perf probe -m ./mymodule.ko my_func
...
open("/home/wangnan/kmodule/mymodule.ko", O_RDONLY) = 3
open("/home/wangnan/kmodule/../lib64/elfutils/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
...
open("/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/wangnan/.debug/.build-id/32/6ab42550ef3d24944f53c817533728367effeb", O_RDONLY) = -1 ENOENT (No such file or directory)
open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory)
In the above example, probe fails before we put the module into
buildid-cache. However, user would expect it success in both case
because perf is able to find probe points actually.
The reason is because perf won't utilize module's full path if it failed
to open debuginfo. In:
convert_to_probe_trace_events ->
find_probe_trace_events_from_map ->
get_target_map ->
kernel_get_module_map ->
machine__findnew_module_map ->
map_groups__find_by_name
map_groups__find_by_name() is able to find the map of that module, but
this information is found from /proc/module before it knows the real
path of the offline module. Therefore, the map->dso->long_name is set to
something like '[mymodule]', which prevent dso__load() find the real
path of the module file.
In another aspect, if dso__load() can get the offline module through
buildid cache, it can read symble table from that ko. Even if debuginfo
is not available, 'perf probe' can success if the '.symtab' can be
found.
This patch improves machine__findnew_module_map(): when dso->long_name
is leading with '[' (doesn't find path of module when parsing
/proc/modules), fixes it by dso__set_long_name(), so following
dso__load() is possible to find the symbol table.
This patch won't interfere with buildid matching. Here is the test
result:
# ./perf probe -m ./mymodule.ko my_func
Added new event:
probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko)
You can now use it in all perf tools, such as:
perf record -e probe:my_func -aR sleep 1
# ./perf probe -d '*'
Removed event: probe:my_func
# mv ./mymodule.{ko,.bak}
# mv ./moduleb.ko mymodule.ko
# ./perf probe -m ./mymodule.ko my_func
/home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko
Error: Failed to add events.
# ./perf probe -v -m ./mymodule.ko my_func
probe-definition(0): my_func
symbol:my_func file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Could not open debuginfo. Try to use symbols.
symsrc__init: build id mismatch for /home/wangnan/kmodule/mymodule.ko.
/home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko
Error: Failed to add events. Reason: No such file or directory (Code: -2)
Signed-off-by: Wang Nan <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
[ Renamed adjust_dso_long_name() do dso__adjust_kmod_long_name() ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Ingo reported following build failure:
$ make clean install
...
CC plugin_kmem.o
fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory
/home/mingo/tip/tools/build/Makefile.build:77: recipe for target
'plugin_hrtimer.o' failed
make[3]: *** [plugin_hrtimer.o] Error 2
Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed
make[2]: *** [plugin_hrtimer-in.o] Error 2
Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed
make[1]: *** [libtraceevent_plugins] Error 2
make[1]: *** Waiting for unfinished jobs....
Currently we have the install-traceevent-plugins target being dependent
on $(LIBTRACEEVENT), which will actualy not build any plugin. So the
install-traceevent-plugins target itself will try to build plugins,
but..
Plugins built is also triggered by perf build itself via
libtraceevent_plugins target.
This might cause a race having one make thread removing temp files from
another and result in above error. Fixing this by having proper plugins
build dependency before installing plugins.
Reported-and-Tested-by:: Ingo Molnar <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The default script handler (the one that displays samples on screen) is
implemented scripting_ops instance with process_event callback.
This way we can't pass any script config into display function, because
we don't want perl or python handlers to be depended on perf script
internals.
Removing the default_scripting_ops and calling process event function
directly. This way it's possible to pass perf_script struct and process
configuration data in following commit.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The callchain rbtree is rebuilt periodically, so it needs to
reinitialize the root everytime. Otherwise it can be stuck in the
rbtree insertion with stale pointers.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If user requested to hide unresolved entries, skip unresolved callchains
as well as hist entries.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The commit 05c8d802fa52 ("perf probe: Fix to free temporal Dwarf_Frame")
tried to fix the memory leak of Dwarf_Frame, but it released the frame
at wrong point. Since the dwarf_frame_cfa(frame, &pf->fb_ops, &nops) can
return an address inside the frame data structure to pf->fb_ops, we can
not release the frame before using pf->fb_ops.
This reverts the commit and releases the frame afterwards (right before
returning from call_probe_finder) correctly.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Reported-by: Michael Petlan <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 05c8d802fa52 ("perf probe: Fix to free temporal Dwarf_Frame")
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding missing parent_val callchain_node initialization.
It's causing segfault in perf top:
$ sudo perf top -g
perf: Segmentation fault
-------- backtrace --------
free_callchain_node(+0x29) in perf [0x4a4b3e]
free_callchain(+0x29) in perf [0x4a5a83]
hist_entry__delete(+0x126) in perf [0x4c6649]
hists__delete_entry(+0x6e) in perf [0x4c66dc]
hists__decay_entries(+0x7d) in perf [0x4c6776]
perf_top__sort_new_samples(+0x7c) in perf [0x436a78]
hist_browser__run(+0xf2) in perf [0x507760]
perf_evsel__hists_browse(+0x1da) in perf [0x507c8d]
perf_evlist__tui_browse_hists(+0x3e) in perf [0x5088cf]
display_thread_tui(+0x7f) in perf [0x437953]
start_thread(+0xc5) in libpthread-2.21.so [0x7f7068fbb555]
__clone(+0x6d) in libc-2.21.so [0x7f7066fc3b9d]
[0x0]
Reported-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 4b3a3212233a ("perf hists browser: Support flat callchains")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add perf-config document to describe the perf configuration and a
'list’ subcommand.
Signed-off-by: Taeung Song <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf configuration file contains many variables to change various
aspects of each of its tools, including output, disk usage, etc.
But looking at the state of configuration is difficult and there's no
documentation about config variables except for the variables in
perfconfig.example exist.
So this patch adds a 'perf-config' command with a '--list' option.
perf config [options]
display current perf config variables.
# perf config -l | --list
Signed-off-by: Taeung Song <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As reported by Milian, currently for DWARF unwind (both libdw and
libunwind) we display callchain in callee order only.
Adding the support to follow callchain order setup to libdw DWARF
unwinder, so we could get following output for report:
$ perf record --call-graph dwarf ls
...
$ perf report --no-children --stdio
21.12% ls libc-2.21.so [.] __strcoll_l
|
---__strcoll_l
mpsort_with_tmp
mpsort_with_tmp
mpsort_with_tmp
sort_files
main
__libc_start_main
_start
$ perf report --stdio --no-children -g caller
21.12% ls libc-2.21.so [.] __strcoll_l
|
---_start
__libc_start_main
main
sort_files
mpsort_with_tmp
mpsort_with_tmp
mpsort_with_tmp
__strcoll_l
Reported-and-Tested-by: Milian Wolff <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Wang Nan <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jan Kratochvil <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding callchain order setup for DWARF unwinder test. The test now runs
unwinder for both callee and caller orders.
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Milian Wolff <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As reported by Milian, currently for DWARF unwind (both libdw and
libunwind) we display callchain in callee order only.
Adding the support to follow callchain order setup to libunwind DWARF
unwinder, so we could get following output for report:
$ perf record --call-graph dwarf ls
...
$ perf report --no-children --stdio
39.26% ls libc-2.21.so [.] __strcoll_l
|
---__strcoll_l
mpsort_with_tmp
mpsort_with_tmp
sort_files
main
__libc_start_main
_start
0
$ perf report -g caller --no-children --stdio
...
39.26% ls libc-2.21.so [.] __strcoll_l
|
---0
_start
__libc_start_main
main
sort_files
mpsort_with_tmp
mpsort_with_tmp
__strcoll_l
Based-on-patch-by: Milian Wolff <[email protected]>
Reported-and-Tested-by: Milian Wolff <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Wang Nan <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Moving initial entry call into get_entries function so all entries
processing is on one place. It will be useful for next change that adds
ordering logic.
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Milian Wolff <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The folded callchain mode is to print all chains in a single line.
Currently perf report --gtk doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Brendan Gregg <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The flat callchain mode is to print all chains in a simple flat
hierarchy so make it easy to see.
Currently perf report --gtk doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
See the previous commit on TUI support for more information.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Brendan Gregg <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The folded callchain mode prints all chains in a single line.
Currently perf report --tui doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add flat_val list to
struct callchain_node and show them along with the (normal) val list.
For example, folded callchain looks like below:
$ perf report -g folded --tui
Samples: 234 of event 'cycles:pp', Event count (approx.): 32605268
Overhead Command Shared Object Symbol
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
+ 28.63% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
+ 11.30% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Brendan Gregg <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|