| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Current _sort__sym_cmp() function is used for comparing symbols between
two hist entries on symbol, symbol_from and symbol_to sort keys. Those
functions pass addresses of symbols but it's meaningless since it gets
over-written inside of the _sort__sym_cmp function to a start address of
the symbol. So just get rid of them.
This might cause a difference than prior output for branch stacks since
it seems not using start address of the symbol but branch address.
However AFAICS it'd be same as it gets overwritten anyway.
Also remove redundant part of code in sort__sym_cmp().
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Check whether both executables are present on the system before
continuing with the build instead of failing halfway, if either are
missing.
Signed-off-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The __perf_evlist__set_leader() was setting the leader for all events in
the list except the first. Which means it assumed the first event
already had event->leader = event.
Seems like this should be the role of the function to also do this. This
is a requirement for an upcoming patch set.
Signed-off-by: Stephane Eranian <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20130131125437.GA3656@quad
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is for tui browser only. This patch will check the returned key of
tui hists browser, if it's K_SWITH_INPUT_DATA, then recreate a session
for the new selected data file.
V2: Move the setup_brower() before the "repeat" jump point.
Signed-off-by: Feng Tang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Based on perf report/top/scripts browser integration idea from acme.
This will enable user to runtime switch the data file, when this option
is selected, it will popup all the legal data files in current working
directory, and the filename selected by user is saved in the global
variable "input_name", and a new key 'K_SWITCH_INPUT_DATA' will be
passed back to the built-in command which will perform the switch.
This initial version only enables it for 'perf report'.
v2: rebase to latest 'perf/core' branch (6e1d4dd) of acme's perf tree
Signed-off-by: Feng Tang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add '-g/--group' option for showing event groups. For simplicity it is
currently not compatible with other options.
$ perf evlist --group
{ref-cycles,cycles}
$ perf evlist
ref-cycles
cycles
Suggested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add report.group config option for setting default value of event
group view. It affects the report output only if perf.data contains
event group info.
A user can write .perfconfig file like below to enable group view by
default:
$ cat ~/.perfconfig
[report]
group = true
And it can be disabled through command line:
$ perf report --no-group
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add --group option to enable event grouping. When enabled, all the
group members information will be shown together with the leader.
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
#
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
#
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When using event group viewer, it's better to show the group description
rather than the leader information alone.
If a leader did not contain any member, it's a non-group event.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since we have all necessary information in the leader events and other
members don't, bypass members. Member events will be shown along with
the leaders if event group is enabled.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When event group feature is enabled, each column header is expanded to
match with the whole group column width. But this is not needed for
GTK+ browser since ti usually use variable-width fonts. So trim it.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Show group members's overhead also when showing leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Show group members' overhead also when showing the leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move coloring logic into the hpp functions so that each value can
be colored independently. It'd required for event group view.
For overhead column, add a callback for printing 'folded_sign' of
callchains of a hist entry.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Show group member's overhead also when showing the leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily. But it gets cumbersome to
maintain a large function in a macro as the function grows. Factor it
out to a function with a little helper macro to access field.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily. But it gets cumbersome
to maintain a large function in a macro as the function grows. Factor
it out to a function with a little helper macro to access field.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Most of hpp helper functions do same jobs for different fields thus
consolidate them to appropriate functions/macros.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When event group is enabled, sorting hist entries on periods for output
should consider groups members' period also. To do that, build period
table using link/pair information and compare the table.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now the event grouping viewing requires linking all member hists in a
group to the leader's. Thus hists__output_resort should be called after
linking all events in evlist.
Introduce symbol_conf.event_group flag to determine whether the feature
is enabled or not.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Save group relationship information so that it can be restored when perf
report is running.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As some new fields for handling groups added, check them to be sure to
have valid values in test__group* cases.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a few of group-related field in struct perf_{evlist,evsel} so that
the group information in a evlist can be known easily. It only counts
groups which have more than 1 members since leader-only groups are
treated as non-group events.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Removing one more memory leak found with valgrind.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Just return to the perf main() routine so that an unified exit path can
be followed and resources released, helping in finding memory leaks.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
cppcheck reported:
[util/header.c:983]: (error) Used file that is not opened.
Thanks to Arnaldo Carvalho de Melo for pointing out that
fclose(NULL) is undefined behavior -> protect against it.
Signed-off-by: Thomas Jarosch <[email protected]>
Link: http://lkml.kernel.org/r/1751778.SZQB4fNdIh@storm
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
/proc/kallsyms" case
cppcheck reported:
[util/header.c:316]: (error) Memory leak: filename
[util/header.c:316]: (error) Memory leak: linkname
Signed-off-by: Thomas Jarosch <[email protected]>
Link: http://lkml.kernel.org/r/9377388.0eFDp53iW6@storm
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
cppcheck reported:
[util/event.c:480]: (error) Memory leak: event
Signed-off-by: Thomas Jarosch <[email protected]>
Link: http://lkml.kernel.org/r/2717013.8dV0naNhAV@storm
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
cppcheck message:
[tools/perf/util/sort.c:277]: (error) Mismatching allocation and deallocation: fp
Also fix descriptor leak on error and always initialize the "fp" variable.
Signed-off-by: Thomas Jarosch <[email protected]>
Link: http://lkml.kernel.org/r/1359112354.yZcisNZ4k0@storm
Link: http://lkml.kernel.org/r/2266358.qvDXKLvJ67@storm
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Can only be triggered via CROSS_COMPILE env var.
Detected by cppcheck.
Signed-off-by: Thomas Jarosch <[email protected]>
Link: http://lkml.kernel.org/r/36736865.AIlztKhDqN@storm
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We print several '__u64' quantities using '%llu'. On powerpc, we by
default include '<asm-generic/int-l64.h> which results in __u64 being an
unsigned long. This causes compile warnings which are treated as errors
due to '-Werror'.
By defining __SANE_USERSPACE_TYPES__ we include <asm-generic/int-ll64.h>
and define __u64 as unsigned long long.
Changelog[v2]:
[Michael Ellerman] Use __SANE_USERSPACE_TYPES__ and avoid PRIu64
format specifier - which as Jiri Olsa pointed out, breaks on x86-64.
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The ->counts field was never freed in the current code. Add
perf_evsel__free_counts() function to free it properly.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch adds a new printing mode for perf stat. It allows interval
printing. That means perf stat can now print event deltas at regular
time interval. This is useful to detect phases in programs.
The -I option enables interval printing. It expects an interval duration
in milliseconds. Minimum is 100ms. Once, activated perf stat prints
events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.000109853 2,388,560,546 cycles
2.000262846 2,393,332,358 cycles
3.000354131 2,393,176,537 cycles
4.000439503 2,393,203,790 cycles
5.000527075 2,393,167,675 cycles
6.000609052 2,393,203,670 cycles
7.000691082 2,393,175,678 cycles
The output format makes it easy to feed into a plotting program such as
gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10
noploop for 10 seconds
1.000084113,2378775498,cycles
2.000245798,2391056897,cycles
3.000354445,2392089414,cycles
4.000459115,2390936603,cycles
5.000565341,2392108173,cycles
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This field will be used by commands which print counter deltas on
regular timer intervals, such as perf stat -I.
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit "perf: Add 'perf bench numa mem'..." added a NUMA performance
benchmark to perf. Make this optional and test for required
dependencies.
Signed-off-by: Peter Hurley <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a suite of NUMA performance benchmarks.
The goal was simulate the behavior and access patterns of real NUMA
workloads, via a wide range of parameters, so this tool goes well
beyond simple bzero() measurements that most NUMA micro-benchmarks use:
- It processes the data and creates a chain of data dependencies,
like a real workload would. Neither the compiler, nor the
kernel (via KSM and other optimizations) nor the CPU can
eliminate parts of the workload.
- It randomizes the initial state and also randomizes the target
addresses of the processing - it's not a simple forward scan
of addresses.
- It provides flexible options to set process, thread and memory
relationship information: -G sets "global" memory shared between
all test processes, -P sets "process" memory shared by all
threads of a process and -T sets "thread" private memory.
- There's a NUMA convergence monitoring and convergence latency
measurement option via -c and -m.
- Micro-sleeps and synchronization can be injected to provoke lock
contention and scheduling, via the -u and -S options. This simulates
IO and contention.
- The -x option instructs the workload to 'perturb' itself artificially
every N seconds, by moving to the first and last CPU of the system
periodically. This way the stability of convergence equilibrium and
the number of steps taken for the scheduler to reach equilibrium again
can be measured.
- The amount of work can be specified via the -l loop count, and/or
via a -s seconds-timeout value.
- CPU and node memory binding options, to test hard binding scenarios.
THP can be turned on and off via madvise() calls.
- Live reporting of convergence progress in an 'at glance' output format.
Printing of convergence and deconvergence events.
The 'perf bench numa mem -a' option will start an array of about 30
individual tests that will each output such measurements:
# Running 5x5-bw-thread, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp 1"
5x5-bw-thread, 20.276, secs, runtime-max/thread
5x5-bw-thread, 20.004, secs, runtime-min/thread
5x5-bw-thread, 20.155, secs, runtime-avg/thread
5x5-bw-thread, 0.671, %, spread-runtime/thread
5x5-bw-thread, 21.153, GB, data/thread
5x5-bw-thread, 528.818, GB, data-total
5x5-bw-thread, 0.959, nsecs, runtime/byte/thread
5x5-bw-thread, 1.043, GB/sec, thread-speed
5x5-bw-thread, 26.081, GB/sec, total-speed
See the help text and the code for more details.
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This test:
7: Validate PERF_RECORD_* events & perf_sample fields
needs to call perf_evlist__delete_maps().
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Removing leaks with valgrind.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is allocated at ui_browser__show(), so free it in its counterpart,
ui_browser__hide().
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The callers of this function (perf_event__process_tracing_data) already
handles a negative value return as error, so just use pr_err() to log
the problem and return -1 instead of panic'ing.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of hand coded equivalent.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We have memdup() exactly for that, remove open coded dup.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes a test is problematic for some reason and one wants to skip it,
for instance:
[root@sandy ~]# perf test
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: function is_writable_pte not defined
Segmentation fault (core dumped)
So now we can use -s/--skip while the problematic tests are being fixed,
allowing us to test all the other entries:
[root@sandy ~]# perf test -s 5
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Skip (user override)
6: x86 rdpmc test : Ok
7: Validate PERF_RECORD_* events & perf_sample fields : Ok
8: Test perf pmu format parsing : Ok
9: Test dso data interface : Ok
10: roundtrip evsel->name check : Ok
11: Check parsing of sched tracepoints fields : Ok
12: Generate and check syscalls:sys_enter_open event fields: Ok
13: struct perf_event_attr setup : Ok
14: Test matching and linking mutliple hists : Ok
15: Try 'use perf' in python, checking link problems : Ok
[root@sandy ~]#
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Just like strlist allows passing a list of entries to parse.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can work with optional parameters that may not set up an
intlist.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The tracepoints used by the workqueue-stats script no longer exist so
trying to run the script results in:
# perf script record workqueue-stats
invalid or unsupported event: 'workqueue:workqueue_creation'
Run 'perf list' for a list of valid events
So remove the script until it can be reworked using the new workqueue
tracepoints.
Signed-off-by: Tom Zanussi <[email protected]>
Link: http://lkml.kernel.org/r/e7a7637d5df9df86887c3bff7683574665ec5360.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running the check-perf-trace scripts causes segfaults in both the Perl
and Python cases:
# perf script record check-perf-trace
# perf script -s libexec/perf-core/scripts/python/check-perf-trace.py
trace_begin
Segmentation fault (core dumped)
The reason is that the 'pevent' field was added to
perf_scripting_context but it wasn't hooked up with an actual pevent in
either case, so when one of the 'common' fields is accessed (in
util/trace-event-parse.c:get_common_fields()), pevent->events tries to
dereference a NULL pointer.
This sets the pevent field when the scripting context is set up.
Signed-off-by: Tom Zanussi <[email protected]>
Link: http://lkml.kernel.org/r/d2b1b8166a6ca0a36e1f5255b88a8289058ba236.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Only display the trace info if using the default event display. When
invoking scripts we assume they have complete control of what's
displayed so we shouldn't unconditionally display the trace info, and
when generating scripts we don't expect to see trace info obscuring the
output message.
Signed-off-by: Tom Zanussi <[email protected]>
Link: http://lkml.kernel.org/r/12ec084ef2870178915c907d16cd1dfa19fbb39e.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|