aboutsummaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)AuthorFilesLines
2020-03-09perf probe: Fix to delete multiple probe eventMasami Hiramatsu1-0/+3
When we put an event with multiple probes, perf-probe fails to delete with filters. This comes from a failure to list up the event name because of overwrapping its name. To fix this issue, skip to list up the event which has same name. Without this patch: # perf probe -l \* probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:21@ probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:25@ probe_perf:map__map_ip (on append_inlines:12@util/machine.c in probe_perf:map__map_ip (on unwind_entry:19@util/machine.c in / probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi # perf probe -d \* "*" does not hit any event. Error: Failed to delete events. Reason: No such file or directory (Code: -2) With it: # perf probe -d \* Removed event: probe_perf:map__map_ip # Fixes: 72363540c009 ("perf probe: Support multiprobe event") Reported-by: Arnaldo Carvalho de Melo <[email protected]> Reported-by: He Zhe <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/158287666197.16697.7514373548551863562.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-09perf parse-events: Fix reading of invalid memory in event parsingIan Rogers1-23/+23
ADD_CONFIG_TERM accesses term->weak, however, in get_config_chgs this value is accessed outside of the list_for_each_entry and references invalid memory. Add an argument for ADD_CONFIG_TERM for weak and set it to false in the get_config_chgs case. This bug was cause by clang's address sanitizer and libfuzzer. It can be reproduced with a command line of: perf stat -a -e i/bs,tsc,L2/o Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-09perf python: Fix clang detection when using CC=clang-versionIlie Halip1-4/+6
Currently, the setup.py script detects the clang compiler only when invoked with CC=clang. But when using a specific version (e.g. CC=clang-11), this doesn't work correctly and wrong compiler flags are set, leading to build errors. To properly detect clang, invoke the compiler with -v and check the output. The first line should start with "clang version ...". Committer testing: $ make CC=clang-9 O=/tmp/build/perf -C tools/perf install-bin <SNIP> $ readelf -wi /tmp/build/perf/python/perf.cpython-37m-x86_64-linux-gnu.so | grep DW_AT_producer | head -1 <c> DW_AT_producer : (indirect string, offset: 0x0): clang version 9.0.1 (Fedora 9.0.1-2.fc31) /usr/bin/clang-9 -Wno-unused-result -Wsign-compare -D DYNAMIC_ANNOTATIONS_ENABLED=1 -D NDEBUG -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-command-line -m64 -mtune=generic -fasynchronous-unwind-tables -fcf-protection=full -D _GNU_SOURCE -fPIC -fwrapv -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wshadow -D HAVE_ARCH_X86_64_SUPPORT -I /tmp/build/perf/arch/x86/include/generated -D HAVE_SYSCALL_TABLE_SUPPORT -D HAVE_PERF_REGS_SUPPORT -D HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET -Werror -O3 -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 -fstack-protector-all -D _FORTIFY_SOURCE=2 -D _LARGEFILE64_SOURCE -D _FILE_OFFSET_BITS=64 -D _GNU_SOURCE -I /home/acme/git/perf/tools/lib/perf/include -I /home/acme/git/perf/tools/perf/util/include -I /home/acme/git/perf/tools/perf/arch/x86/include -I /home/acme/git/perf/tools/include/ -I /home/acme/git/perf/tools/arch/x86/include/uapi -I /home/acme/git/perf/tools/include/uapi -I /home/acme/git/perf/tools/arch/x86/include/ -I /home/acme/git/perf/tools/arch/x86/ -I /tmp/build/perf//util -I /tmp/build/perf/ -I /home/acme/git/perf/tools/perf/util -I /home/acme/git/perf/tools/perf -I /home/acme/git/perf/tools/lib/ -D HAVE_PTHREAD_ATTR_SETAFFINITY_NP -D HAVE_PTHREAD_BARRIER -D HAVE_EVENTFD -D HAVE_GET_CURRENT_DIR_NAME -D HAVE_GETTID -D HAVE_DWARF_GETLOCATIONS_SUPPORT -D HAVE_GLIBC_SUPPORT -D HAVE_AIO_SUPPORT -D HAVE_SCHED_GETCPU_SUPPORT -D HAVE_SETNS_SUPPORT -D HAVE_LIBELF_SUPPORT -D HAVE_LIBELF_MMAP_SUPPORT -D HAVE_ELF_GETPHDRNUM_SUPPORT -D HAVE_GELF_GETNOTE_SUPPORT -D HAVE_ELF_GETSHDRSTRNDX_SUPPORT -D HAVE_DWARF_SUPPORT -D HAVE_LIBBPF_SUPPORT -D HAVE_BPF_PROLOGUE -D HAVE_SDT_EVENT -D HAVE_JITDUMP -D HAVE_DWARF_UNWIND_SUPPORT -D NO_LIBUNWIND_DEBUG_FRAME -D HAVE_LIBUNWIND_SUPPORT -D HAVE_LIBCRYPTO_SUPPORT -D HAVE_SLANG_SUPPORT -D HAVE_GTK2_SUPPORT -D NO_LIBPERL -D HAVE_TIMERFD_SUPPORT -D HAVE_LIBPYTHON_SUPPORT -D HAVE_CPLUS_DEMANGLE_SUPPORT -D HAVE_LIBBFD_SUPPORT -D HAVE_ZLIB_SUPPORT -D HAVE_LZMA_SUPPORT -D HAVE_ZSTD_SUPPORT -D HAVE_LIBCAP_SUPPORT -D HAVE_BACKTRACE_SUPPORT -D HAVE_LIBNUMA_SUPPORT -D HAVE_KVM_STAT_SUPPORT -D DISASM_FOUR_ARGS_SIGNATURE -D HAVE_LIBBABELTRACE_SUPPORT -D HAVE_AUXTRACE_SUPPORT -D HAVE_JVMTI_CMLR -I /tmp/build/perf/ -fPIC -I util/include -I /usr/include/python3.7m -c /home/acme/git/perf/tools/perf/util/python.c -o /tmp/build/perf/python_ext_build/tmp/home/acme/git/perf/tools/perf/util/python.o -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wshadow -D HAVE_ARCH_X86_64_SUPPORT -I /tmp/build/perf/arch/x86/include/generated -D HAVE_SYSCALL_TABLE_SUPPORT -D HAVE_PERF_REGS_SUPPORT -D HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET -Werror -O3 -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 -fstack-protector-all -D _FORTIFY_SOURCE=2 -D _LARGEFILE64_SOURCE -D _FILE_OFFSET_BITS=64 -D _GNU_SOURCE -I /home/acme/git/perf/tools/lib/perf/include -I /home/acme/git/perf/tools/perf/util/include -I /home/acme/git/perf/tools/perf/arch/x86/include -I /home/acme/git/perf/tools/include/ -I /home/acme/git/perf/tools/arch/x86/include/uapi -I /home/acme/git/perf/tools/include/uapi -I /home/acme/git/perf/tools/arch/x86/include/ -I /home/acme/git/perf/tools/arch/x86/ -I /tmp/build/perf//util -I /tmp/build/perf/ -I /home/acme/git/perf/tools/perf/util -I /home/acme/git/perf/tools/perf -I /home/acme/git/perf/tools/lib/ -D HAVE_PTHREAD_ATTR_SETAFFINITY_NP -D HAVE_PTHREAD_BARRIER -D HAVE_EVENTFD -D HAVE_GET_CURRENT_DIR_NAME -D HAVE_GETTID -D HAVE_DWARF_GETLOCATIONS_SUPPORT -D HAVE_GLIBC_SUPPORT -D HAVE_AIO_SUPPORT -D HAVE_SCHED_GETCPU_SUPPORT -D HAVE_SETNS_SUPPORT -D HAVE_LIBELF_SUPPORT -D HAVE_LIBELF_MMAP_SUPPORT -D HAVE_ELF_GETPHDRNUM_SUPPORT -D HAVE_GELF_GETNOTE_SUPPORT -D HAVE_ELF_GETSHDRSTRNDX_SUPPORT -D HAVE_DWARF_SUPPORT -D HAVE_LIBBPF_SUPPORT -D HAVE_BPF_PROLOGUE -D HAVE_SDT_EVENT -D HAVE_JITDUMP -D HAVE_DWARF_UNWIND_SUPPORT -D NO_LIBUNWIND_DEBUG_FRAME -D HAVE_LIBUNWIND_SUPPORT -D HAVE_LIBCRYPTO_SUPPORT -D HAVE_SLANG_SUPPORT -D HAVE_GTK2_SUPPORT -D NO_LIBPERL -D HAVE_TIMERFD_SUPPORT -D HAVE_LIBPYTHON_SUPPORT -D HAVE_CPLUS_DEMANGLE_SUPPORT -D HAVE_LIBBFD_SUPPORT -D HAVE_ZLIB_SUPPORT -D HAVE_LZMA_SUPPORT -D HAVE_ZSTD_SUPPORT -D HAVE_LIBCAP_SUPPORT -D HAVE_BACKTRACE_SUPPORT -D HAVE_LIBNUMA_SUPPORT -D HAVE_KVM_STAT_SUPPORT -D DISASM_FOUR_ARGS_SIGNATURE -D HAVE_LIBBABELTRACE_SUPPORT -D HAVE_AUXTRACE_SUPPORT -D HAVE_JVMTI_CMLR -I /tmp/build/perf/ -fno-strict-aliasing -Wno-write-strings -Wno-unused-parameter -Wno-redundant-decls $ And here is how tools/perf/util/setup.py checks if the used clang has options that the distro specific python extension building compiler defaults: if cc_is_clang: from distutils.sysconfig import get_config_vars vars = get_config_vars() for var in ('CFLAGS', 'OPT'): vars[var] = sub("-specs=[^ ]+", "", vars[var]) if not clang_has_option("-mcet"): vars[var] = sub("-mcet", "", vars[var]) if not clang_has_option("-fcf-protection"): vars[var] = sub("-fcf-protection", "", vars[var]) if not clang_has_option("-fstack-clash-protection"): vars[var] = sub("-fstack-clash-protection", "", vars[var]) if not clang_has_option("-fstack-protector-strong"): vars[var] = sub("-fstack-protector-strong", "", vars[var]) So "-fcf-protection=full" is used, clang-9 has this option and thus it was kept, the perf python extension was built with it and the build completed successfully. Link: https://github.com/ClangBuiltLinux/linux/issues/903 Signed-off-by: Ilie Halip <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Igor Lubashev <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-09perf map: Fix off by one in strncpy() size argumentdisconnect3d1-1/+1
This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in: strncmp(filename, "/system/lib/", 11) the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious". This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact. Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries") Signed-off-by: disconnect3d <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Michael Lentine <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06tools: Let O= makes handle a relative path with -C optionMasami Hiramatsu1-1/+1
When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path: $ make O=BUILD -C tools/perf/ make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf' BUILD: Doing 'make -j8' parallel build ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop. make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf' The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command. To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs. Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Michal Marek <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sasha Levin <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06tools: Fix off-by 1 relative directory includesIan Rogers11-65/+65
This is currently working due to extra include paths in the build. Committer testing: $ cd tools/include/uapi/asm/ Before this patch: $ ls -la ../../arch/x86/include/uapi/asm/errno.h ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory $ After this patch; $ ls -la ../../../arch/x86/include/uapi/asm/errno.h -rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h $ Check that that is still under tools/, i.e. hasn't escaped into the main kernel sources: $ cd ../../../arch/x86/include/uapi/asm/ $ pwd /home/acme/git/perf/tools/arch/x86/include/uapi/asm $ Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexios Zavras <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Igor Lubashev <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Wei Li <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf jevents: Fix leak of mapfile memoryJohn Garry1-6/+9
The memory for global pointer is never freed during normal program execution, so let's do that in the main function exit as a good programming practice. A stray blank line is also removed. Reported-by: Jiri Olsa <[email protected]> Signed-off-by: John Garry <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: James Clark <[email protected]> Cc: Joakim Zhang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf bench: Clear struct sigaction before sigaction() syscallTommi Rantala7-0/+7
Avoid garbage in sigaction structs used in sigaction() syscalls. Valgrind is complaining about it. Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Darren Hart <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf bench futex-wake: Restore thread count default to online CPU countTommi Rantala1-2/+2
Since commit 3b2323c2c1c4 ("perf bench futex: Use cpumaps") the default number of threads the benchmark uses got changed from number of online CPUs to zero: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time. [Run 1]: Wokeup 0 of 0 threads in 0.0000 ms [...] [Run 10]: Wokeup 0 of 0 threads in 0.0000 ms Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%) Restore the old behavior by grabbing the number of online CPUs via cpu->nr: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time. [Run 1]: Wokeup 8 of 8 threads in 0.0260 ms [...] [Run 10]: Wokeup 8 of 8 threads in 0.0270 ms Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%) Fixes: 3b2323c2c1c4 ("perf bench futex: Use cpumaps") Signed-off-by: Tommi Rantala <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf top: Fix stdio interface input handling with glibc 2.28+Tommi Rantala1-1/+3
Since glibc 2.28 when running 'perf top --stdio', input handling no longer works, but hitting any key always just prints the "Mapped keys" help text. To fix it, call clearerr() in the display_thread() loop to clear any EOF sticky errors, as instructed in the glibc NEWS file (https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS): * All stdio functions now treat end-of-file as a sticky condition. If you read from a file until EOF, and then the file is enlarged by another process, you must call clearerr or another function with the same effect (e.g. fseek, rewind) before you can read the additional data. This corrects a longstanding C99 conformance bug. It is most likely to affect programs that use stdio to read interactive input from a terminal. (Bug #1190.) Signed-off-by: Tommi Rantala <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf diff: Fix undefined string comparision spotted by clang's -Wstring-compareNick Desaulniers3-3/+5
clang warns: util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/map.c:434:15: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if (srcline != SRCLINE_UNKNOWN) ^ ~~~~~~~~~~~~~~~ Reviewer Notes: Looks good to me. Some more context: https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare The spec says: J.1 Unspecified behavior The following are unspecified: .. Whether two string literals result in distinct arrays (6.4.5). Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://github.com/ClangBuiltLinux/linux/issues/900 Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-04perf annotate: Get rid of annotation->nr_jumpsRavi Bangoria2-3/+0
The 'nr_jumps' field in 'struct annotation' is not used since it's inception in commit 2402e4a936a0 ("perf annotate browser: Show 'jumpy' functions"). Get rid of it. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-04perf llvm: Add debug hint message about missing kernel-devel packageArnaldo Carvalho de Melo1-0/+2
To help in debugging, add this extra message: detect_kbuild_dir: Couldn't find "/lib/modules/5.4.20-200.fc31.x86_64/build/include/generated/autoconf.h", missing kernel-devel package?. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-04perf stat: Show percore counts in per CPU outputJin Yao4-5/+42
We have supported the event modifier "percore" which sums up the event counts for all hardware threads in a core and show the counts per core. For example, # perf stat -e cpu/event=cpu-cycles,percore/ -a -A -- sleep 1 Performance counter stats for 'system wide': S0-D0-C0 395,072 cpu/event=cpu-cycles,percore/ S0-D0-C1 851,248 cpu/event=cpu-cycles,percore/ S0-D0-C2 954,226 cpu/event=cpu-cycles,percore/ S0-D0-C3 1,233,659 cpu/event=cpu-cycles,percore/ This patch provides a new option "--percore-show-thread". It is used with event modifier "percore" together to sum up the event counts for all hardware threads in a core but show the counts per hardware thread. This is essentially a replacement for the any bit (which is gone in Icelake). Per core counts are useful for some formulas, e.g. CoreIPC. The original percore version was inconvenient to post process. This variant matches the output of the any bit. With this patch, for example, # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1 Performance counter stats for 'system wide': CPU0 2,453,061 cpu/event=cpu-cycles,percore/ CPU1 1,823,921 cpu/event=cpu-cycles,percore/ CPU2 1,383,166 cpu/event=cpu-cycles,percore/ CPU3 1,102,652 cpu/event=cpu-cycles,percore/ CPU4 2,453,061 cpu/event=cpu-cycles,percore/ CPU5 1,823,921 cpu/event=cpu-cycles,percore/ CPU6 1,383,166 cpu/event=cpu-cycles,percore/ CPU7 1,102,652 cpu/event=cpu-cycles,percore/ We can see counts are duplicated in CPU pairs (CPU0/CPU4, CPU1/CPU5, CPU2/CPU6, CPU3/CPU7). The interval mode also works. For example, # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -I 1000 # time CPU counts unit events 1.000425421 CPU0 925,032 cpu/event=cpu-cycles,percore/ 1.000425421 CPU1 430,202 cpu/event=cpu-cycles,percore/ 1.000425421 CPU2 436,843 cpu/event=cpu-cycles,percore/ 1.000425421 CPU3 1,192,504 cpu/event=cpu-cycles,percore/ 1.000425421 CPU4 925,032 cpu/event=cpu-cycles,percore/ 1.000425421 CPU5 430,202 cpu/event=cpu-cycles,percore/ 1.000425421 CPU6 436,843 cpu/event=cpu-cycles,percore/ 1.000425421 CPU7 1,192,504 cpu/event=cpu-cycles,percore/ If we offline CPU5, the result is: # perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1 Performance counter stats for 'system wide': CPU0 2,752,148 cpu/event=cpu-cycles,percore/ CPU1 1,009,312 cpu/event=cpu-cycles,percore/ CPU2 2,784,072 cpu/event=cpu-cycles,percore/ CPU3 2,427,922 cpu/event=cpu-cycles,percore/ CPU4 2,752,148 cpu/event=cpu-cycles,percore/ CPU6 2,784,072 cpu/event=cpu-cycles,percore/ CPU7 2,427,922 cpu/event=cpu-cycles,percore/ 1.001416041 seconds time elapsed v4: --- Ravi Bangoria reports an issue in v3. Once we offline a CPU, the output is not correct. The issue is we should use the cpu idx in print_percore_thread rather than using the cpu value. v3: --- 1. Fix the interval mode output error 2. Use cpu value (not cpu index) in config->aggr_get_id(). 3. Refine the code according to Jiri's comments. v2: --- Add the explanation in change log. This is essentially a replacement for the any bit. No code change. Signed-off-by: Jin Yao <[email protected]> Tested-by: Ravi Bangoria <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-04tools lib api fs: Move cgroupsfs_find_mountpoint()Namhyung Kim1-61/+2
Move it from tools/perf/util/cgroup.c as it can be used by other places. Note that cgroup filesystem is different from others since it's usually mounted separately (in v1) for each subsystem. I just copied the code with a little modification to pass a name of subsystem. Suggested-by: Jiri Olsa <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-04perf diff: Fix undefined string comparison spotted by clang's -Wstring-compareNick Desaulniers3-3/+5
clang warns: util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/map.c:434:15: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if (srcline != SRCLINE_UNKNOWN) ^ ~~~~~~~~~~~~~~~ Reviewer Notes: Looks good to me. Some more context: https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare The spec says: J.1 Unspecified behavior The following are unspecified: .. Whether two string literals result in distinct arrays (6.4.5). Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://github.com/ClangBuiltLinux/linux/issues/900 Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-03perf symbols: Don't try to find a vmlinux file when looking for kernel modulesArnaldo Carvalho de Melo1-7/+6
The dso->kernel value is now set to everything that is in machine->kmaps, but that was being used to decide if vmlinux lookup is needed, which ended up making that lookup be made for kernel modules, that now have dso->kernel set, leading to these kinds of warnings when running on a machine with compressed kernel modules, like fedora:31: [root@five ~]# perf record -F 10000 -a sleep 2 [ perf record: Woken up 1 times to write data ] lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' [ perf record: Captured and wrote 1.024 MB perf.data (1366 samples) ] [root@five ~]# This happens when collecting the buildid, when we find samples for kernel modules, fix it by checking if the looked up DSO is a kernel module by other means. Fixes: 02213cec64bb ("perf maps: Mark module DSOs with kernel type") Tested-by: Jiri Olsa <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-03perf bench: Share some global variables to fix build with gcc 10Arnaldo Carvalho de Melo5-22/+23
Noticed with gcc 10 (fedora rawhide) that those variables were not being declared as static, so end up with: ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1 Prefix those with bench__ and add them to bench/bench.h, so that we can share those on the tools needing to access those variables from signal handlers. Acked-by: Thomas Gleixner <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-02perf parse-events: Use asprintf() instead of strncpy() to read tracepoint filesArnaldo Carvalho de Melo1-8/+2
Make the code more compact by using asprintf() instead of malloc()+strncpy() which also uses less memory and avoids these warnings with gcc 10: CC /tmp/build/perf/util/cloexec.o In file included from /usr/include/string.h:495, from util/parse-events.h:12, from util/parse-events.c:18: In function ‘strncpy’, inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:271:5: /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘sys_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/dirent.h:61, from util/parse-events.c:5: util/parse-events.c: In function ‘tracepoint_id_to_path’: /usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here 33 | char d_name[256]; /* We must not include limits.h! */ | ^~~~~~ In file included from /usr/include/string.h:495, from util/parse-events.h:12, from util/parse-events.c:18: In function ‘strncpy’, inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:273:5: /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘evt_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/dirent.h:61, from util/parse-events.c:5: util/parse-events.c: In function ‘tracepoint_id_to_path’: /usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here 33 | char d_name[256]; /* We must not include limits.h! */ | ^~~~~~ CC /tmp/build/perf/util/call-path.o Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-02perf env: Do not return pointers to local variablesArnaldo Carvalho de Melo1-2/+2
It is possible to return a pointer to a local variable when looking up the architecture name for the running system and no normalization is done on that value, i.e. we may end up returning the uts.machine local variable. While this doesn't happen on most arches, as normalization takes place, lets fix this by making that a static variable and optimize it a bit by not always running uname(), only the first time. Noticed in fedora rawhide running with: [perfbuilder@a5ff49d6e6e4 ~]$ gcc --version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) Reported-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-02perf tests bp_account: Make global variable staticArnaldo Carvalho de Melo1-1/+1
To fix the build with newer gccs, that without this patch exit with: LD /tmp/build/perf/tests/perf-in.o ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1 First noticed in fedora:rawhide/32 with: [perfbuilder@a5ff49d6e6e4 ~]$ gcc --version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) Reported-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Fix segfault with source toggleRavi Bangoria1-0/+2
While rendering annotate browser from perf report tui, we keep track of total number of lines(asm + source) in annotation->nr_entries and total number of asm lines in annotation->nr_asm_entries. But we don't reset them before starting. Thus if user annotates same function multiple times, we restart incrementing these fields with old values. This causes a segfault when user tries to toggle source code after annotating same function multiple times. Fix it. Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Align struct annotate_argsRavi Bangoria1-6/+6
Align fields of struct annotate_args. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Simplify disasm_line allocation and freeing codeRavi Bangoria2-56/+31
We are allocating disasm_line object in annotation_line__new() instead of disasm_line__new(). Similarly annotation_line__delete() is actually freeing disasm_line object as well. This complexity is because of privsize. But we don't need privsize anymore so get rid of privsize and simplify disasm_line allocation and freeing code. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Remove privsize from symbol__annotate() argsRavi Bangoria4-6/+7
privsize is passed as 0 from all the symbol__annotate() callers. Remove it from argument list. Signed-off-by: Ravi Bangoria <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf probe: Check return value of strlist__add() for -ENOMEMHe Zhe2-6/+28
strlist__add() may fail with -ENOMEM. Check it and give debugging hint in advance. Signed-off-by: He Zhe <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf config: Document missing config optionsRavi Bangoria1-0/+44
While documenting annotate.show_nr_samples config option, I found many other config options missing in perf-config documentation. Add them. Signed-off-by: Ravi Bangoria <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Fix perf config option descriptionRavi Bangoria1-1/+29
perf config annotate options says it works only with TUI, which is wrong. Most of the TUI options are applicable to stdio2 as well. So remove that generic line and add individual line with each option stating which browsers supports that option. Also, annotate.show_nr_samples config is missing in Documentation. Describe it. Signed-off-by: Ravi Bangoria <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Prefer cmdline option over default configRavi Bangoria1-2/+2
For all the perf-config options that can also be set from command line option, the preference is given to command line version in case of any conflict. But that's opposite in case of perf annotate. i.e. the more preference is given to default option rather than command line option. Fix it. Before: $ ./perf config annotate.show_nr_samples=false $ ./perf annotate shash --show-nr-samples Percent│ │24: mov -0xc(%rbp),%eax 49.19 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: Samples│ │24: mov -0xc(%rbp),%eax 1 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Make perf config effectiveRavi Bangoria5-55/+33
perf default config set by user in [annotate] section is totally ignored by annotate code. Fix it. Before: $ ./perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true $ ./perf annotate shash │ unsigned h = 0; │ movl $0x0,-0xc(%rbp) │ while (*s) │ ↓ jmp 44 │ h = 65599 * h + *s++; 11.33 │24: mov -0xc(%rbp),%eax 43.50 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: │ movl $0x0,-0xc(%rbp) │ ↓ jmp 44 1 │1 24: mov -0xc(%rbp),%eax 4 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Note that we have removed show_nr_samples and show_total_period from annotation_options because they are not used. Instead of them we use symbol_conf.show_nr_samples and symbol_conf.show_total_period. Committer testing: Using 'perf annotate --stdio2' to use the TUI rendering but emitting the output to stdio: # perf config # # perf config annotate.hide_src_code=true # perf config annotate.hide_src_code=true # # perf config annotate.show_nr_jumps=true # perf config annotate.show_nr_samples=true # perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true # # Before: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Percent 00000000000609f0 <ObjectInstance::weak_pointer_was_finalized()@@Base>: endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 100.00 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # After: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1 1b: xor %eax,%eax pop %rbp ← retq nop 1 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # # perf config annotate.show_nr_jumps annotate.show_nr_jumps=true # perf config annotate.show_nr_jumps=false # perf config annotate.show_nr_jumps annotate.show_nr_jumps=false # # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf config: Introduce perf_config_u8()Ravi Bangoria2-0/+13
Introduce perf_config_u8() utility function to convert char * input into u8 destination. We will utilize it in followup patch. Signed-off-by: Ravi Bangoria <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Fix --show-nr-samples for tui/stdio2Ravi Bangoria2-7/+5
perf annotate --show-nr-samples does not really show number of samples. The reason is we have two separate variables for the same purpose. One is in symbol_conf.show_nr_samples and another is annotation_options.show_nr_samples. We save command line option in symbol_conf.show_nr_samples but uses annotation_option.show_nr_samples while rendering tui/stdio2 browser. Though, we copy symbol_conf.show_nr_samples to annotation__default_options.show_nr_samples but that is not really effective as we don't use annotation__default_options once we copy default options to dynamic variable annotate.opts in cmd_annotate(). Instead of all these complication, keep only one variable and use it all over. symbol_conf.show_nr_samples is used by perf report/top as well. So let's kill annotation_options.show_nr_samples. On a side note, I've kept annotation_options.show_nr_samples definition because it's still used by perf-config code. Follow up patch to fix perf-config for annotate will remove annotation_options.show_nr_samples. Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate: Fix --show-total-period for tui/stdio2Ravi Bangoria3-7/+6
perf annotate --show-total-period does not really show total period. The reason is we have two separate variables for the same purpose. One is in symbol_conf.show_total_period and another is annotation_options.show_total_period. We save command line option in symbol_conf.show_total_period but uses annotation_option.show_total_period while rendering tui/stdio2 browser. Though, we copy symbol_conf.show_total_period to annotation__default_options.show_total_period but that is not really effective as we don't use annotation__default_options once we copy default options to dynamic variable annotate.opts in cmd_annotate(). Instead of all these complication, keep only one variable and use it all over. symbol_conf.show_total_period is used by perf report/top as well. So let's kill annotation_options.show_total_period. On a side note, I've kept annotation_options.show_total_period definition because it's still used by perf-config code. Follow up patch to fix perf-config for annotate will remove annotation_options.show_total_period. Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-27perf annotate/tui: Re-render title bar after switching back from script browserRavi Bangoria1-4/+3
The 'perf annotate' TUI browser provides a 'r' hot key to switch to a script browser. But the annotate browser title bar becomes hidden while switching back from script browser. Fix it. Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Taeung Song <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yisheng Xie <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf arch powerpc: Sync powerpc syscall.tbl with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
Copy over powerpc syscall.tbl to grab changes from the below commits fddb5d430ad9 ("open: introduce openat2(2) syscall") 9a2cef09c801 ("arch: wire up pidfd_getfd syscall") Now 'perf trace' on powerpc will be able to map from those syscall strings to the right syscall numbers, i.e. perf trace -e pidfd* Will include 'pidfd_getfd' as well as: perf trace open* Will cover all 'open' variants. Reported-by: Stephen Rothwell <[email protected]> Reviewed-by: Ravi Bangoria <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Aleksa Sarai <[email protected]> Cc: Al Viro <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Sargun Dhillon <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf auxtrace: Add auxtrace_record__read_finish()Adrian Hunter6-74/+35
All ->read_finish() implementations are doing the same thing. Add a helper function so that they can share the same implementation. Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Leo Yan <[email protected]> Tested-by: Leo Yan <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Wei Li <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf arm-spe: Fix endless record after being terminatedAdrian Hunter1-1/+4
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will be set and the event list will be disabled by evlist__disable() once. While in auxtrace_record.read_finish(), the related events will be enabled again, if they are continuous, the recording seems to be endless. If the event is disabled, don't enable it again here. Based-on-patch-by: Wei Li <[email protected]> Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Tan Xiaojun <[email protected]> Cc: [email protected] # 5.4+ Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf cs-etm: Fix endless record after being terminatedWei Li1-1/+4
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will be set and the event list will be disabled by evlist__disable() once. While in auxtrace_record.read_finish(), the related events will be enabled again, if they are continuous, the recording seems to be endless. If the cs_etm event is disabled, we don't enable it again here. Note: This patch is NOT tested since i don't have such a machine with coresight feature, but the code seems buggy same as arm-spe and intel-pt. Tester notes: Thanks for looping, Adrian. Applied this patch and tested with CoreSight on juno board, it works well. Signed-off-by: Wei Li <[email protected]> Reviewed-by: Leo Yan <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Tan Xiaojun <[email protected]> Cc: [email protected] # 5.4+ Link: http://lore.kernel.org/lkml/[email protected] [ahunter: removed redundant 'else' after 'return'] Signed-off-by: Adrian Hunter <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf intel-bts: Fix endless record after being terminatedWei Li1-1/+4
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will be set and the event list will be disabled by evlist__disable() once. While in auxtrace_record.read_finish(), the related events will be enabled again, if they are continuous, the recording seems to be endless. If the intel_bts event is disabled, we don't enable it again here. Note: This patch is NOT tested since i don't have such a machine with intel_bts feature, but the code seems buggy same as arm-spe and intel-pt. Signed-off-by: Wei Li <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Tan Xiaojun <[email protected]> Cc: [email protected] # 5.4+ Link: http://lore.kernel.org/lkml/[email protected] [ahunter: removed redundant 'else' after 'return'] Signed-off-by: Adrian Hunter <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf intel-pt: Fix endless record after being terminatedWei Li1-1/+4
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will be set and the event list will be disabled by evlist__disable() once. While in auxtrace_record.read_finish(), the related events will be enabled again, if they are continuous, the recording seems to be endless. If the intel_pt event is disabled, we don't enable it again here. Before the patch: huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \ intel_pt//u -p 46803 ^C^C^C^C^C^C After the patch: huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \ intel_pt//u -p 48591 ^C[ perf record: Woken up 0 times to write data ] Warning: AUX data lost 504 times out of 4816! [ perf record: Captured and wrote 2024.405 MB perf.data ] Signed-off-by: Wei Li <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Tan Xiaojun <[email protected]> Cc: [email protected] # 5.4+ Link: http://lore.kernel.org/lkml/[email protected] [ ahunter: removed redundant 'else' after 'return' ] Signed-off-by: Adrian Hunter <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf test: Fix test trace+probe_vfs_getname.sh on s390Thomas Richter1-1/+1
This test places a kprobe to function getname_flags() in the kernel which has the following prototype: struct filename *getname_flags(const char __user *filename, int flags, int *empty) The 'filename' argument points to a filename located in user space memory. Looking at commit 88903c464321c ("tracing/probe: Add ustring type for user-space string") the kprobe should indicate that user space memory is accessed. Output before: [root@m35lp76 perf]# ./perf test 66 67 66: Use vfs_getname probe to get syscall args filenames : FAILED! 67: Check open filename arg using perf trace + vfs_getname: FAILED! [root@m35lp76 perf]# Output after: [root@m35lp76 perf]# ./perf test 66 67 66: Use vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok [root@m35lp76 perf]# Comments from Masami Hiramatsu: This bug doesn't happen on x86 or other archs on which user address space and kernel address space is the same. On some arches (ppc64 in this case?) user address space is partially or completely the same as kernel address space. (Yes, they switch the world when running into the kernel) In this case, we need to use different data access functions for each space. That is why I introduced the "ustring" type for kprobe events. As far as I can see, Thomas's patch is sane. Thomas, could you show us your result on your test environment? Comments from Thomas Richter: Test results for s/390 included above. Signed-off-by: Thomas Richter <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-18perf bpf: Remove bpf/ subdir from bpf.h headers used to build bpf eventsArnaldo Carvalho de Melo3-3/+3
The bpf.h file needed gets installed in /usr/lib/include/perf/bpf/bpf.h, and /usr/lib/include/perf/ is added to the include path passed to clang to build the eBPF bytecode, so just remove "bpf/", its directly in the path passed already. This was working by accident, fix it. I.e. now this is back working: # cat /home/acme/git/perf/tools/perf/examples/bpf/hello.c #include <stdio.h> int syscall_enter(openat)(void *args) { puts("Hello, world\n"); return 0; } license(GPL); # perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/hello.c 0.000 pickup/21493 __bpf_stdout__(Hello, world) 56.462 sh/13539 __bpf_stdout__(Hello, world) 56.536 sh/13539 __bpf_stdout__(Hello, world) 56.673 sh/13539 __bpf_stdout__(Hello, world) 56.781 sh/13539 __bpf_stdout__(Hello, world) 56.707 perf/13182 __bpf_stdout__(Hello, world) 56.849 perf/13182 __bpf_stdout__(Hello, world) ^C # Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-14perf llvm: Fix script used to obtain kernel make directives to work with new ↵Arnaldo Carvalho de Melo1-0/+1
kbuild Before this patch: # ./perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : FAILED! 39.3: Compile source for BPF prologue generation : Skip 39.4: Compile source for BPF relocation : Skip 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : FAILED! 41.4: BPF relocation checker : Skip # Using 'perf test -v' for these tests shows that it is not finding uapi/linux/fs.h, which ends up being because we don't setup the right header path. Fix it. After this patch: # perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : Ok 39.3: Compile source for BPF prologue generation : Ok 39.4: Compile source for BPF relocation : Ok 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : Ok 41.4: BPF relocation checker : Ok # Longer description: In llvm-utils.c we use some techniques to obtain the kbuild make directives and that recently stopped working as now 'ar' gets called and expects to find the dummy.o used to echo these variables: $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) Add the $(CC) line to satisfy that, making sure this works with all kernels, i.e. preserving the temp directory and files in it used for this technique we can see that it works everywhere: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:42 . drwxrwxrwt. 47 root root 1200 Feb 14 09:42 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # # cat /tmp/tmp.qgaFHgxjZ4/Makefile obj-y := dummy.o $(obj)/%.o: $(src)/%.c @echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)" $(CC) -c -o $@ $< # Then build with an old kernel Makefile: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 8 drwx------. 2 root root 100 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # And a new one: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 16 drwx------. 2 root root 160 Feb 14 09:44 . drwxrwxrwt. 47 root root 1200 Feb 14 09:44 .. -rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a -rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile -rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order # Reported-by: Thomas Richter <[email protected]> Tested-by: Thomas Richter <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: He Kuang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Wang Nan <[email protected]> Cc: Zefan Li <[email protected]> Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-12perf tools: Add arm64 version of get_cpuid()John Garry1-15/+48
Add an arm64 version of get_cpuid(), which is used for various annotation and headers - for example, I now get the CPUID in "perf report --header", as shown in this snippet: # hostname : ubuntu # os release : 5.5.0-rc1-dirty # perf version : 5.5.rc1.gbf8a13dc9851 # arch : aarch64 # nrcpus online : 96 # nrcpus avail : 96 # cpuid : 0x00000000480fd010 Since much of the code to read the MIDR is already in get_cpuid_str(), factor out this code. Tester notes: I tested this patch on my new ARM64 Kunpeng 920 server. [root@node1 zsk]# ./perf --version perf version 5.6.rc1.g2cdb955b7252 Both perf list and perf stat can work. Signed-off-by: John Garry <[email protected]> Tested-by: Shaokun Zhang <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-11perf trace: Resolve prctl's 'option' arg strings to numbersArnaldo Carvalho de Melo1-1/+3
# perf trace -e syscalls:sys_enter_prctl --filter="option==SET_NAME" 0.000 Socket Thread/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8) 0.053 SSL Cert #78/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8) ^C # If one uses '-v' with 'perf trace', we can see the filter it puts in place: New filter for syscalls:sys_enter_prctl: (option==0xf) && (common_pid != 3859 && common_pid != 2757) We still need to allow using plain '-e prctl' and have this turn into creating a 'syscalls:sys_enter_prctl' event so that the filter can be applied only to it as right now '-e prctl' ends up using the 'raw_syscalls:sys_enter/sys_exit'. The end goal is to have something like: # perf trace -e prctl/option==SET_NAME/ And have that use tracepoint filters or eBPF ones. Cc: Adrian Hunter <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Christie <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-11perf beauty prctl: Export the 'options' strarrayArnaldo Carvalho de Melo2-1/+4
So that we can use it with strtoul, allowing string to number conversions in filter expressions. Cc: Adrian Hunter <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Christie <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-11perf maps: Move kmap::kmaps setup to maps__insert()Jiri Olsa2-12/+11
So the kmaps pointer setup is centralized and we do not need to update it in all those places (2 current places and few more missing) after calling maps__insert(). Reported-by: Ravi Bangoria <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Ravi Bangoria <[email protected]> Tested-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-11perf maps: Fix map__clone() for struct kmapJiri Olsa1-1/+6
The map__clone() function can be called on kernel maps as well, so it needs to duplicate the whole kmap data. Reported-by: Ravi Bangoria <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Ravi Bangoria <[email protected]> Tested-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-11perf maps: Mark ksymbol DSOs with kernel typeJiri Olsa1-2/+10
We add ksymbol map into machine->kmaps, so it needs to be created as 'struct kmap', which is dependent on its dso having kernel type. Reported-by: Ravi Bangoria <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Ravi Bangoria <[email protected]> Tested-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/20200210200847.GA36715@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-11perf maps: Mark module DSOs with kernel typeJiri Olsa1-0/+1
We add kernel module map into machine->kmaps, so it needs to be created as 'struct kmap', which is dependent on its dso having kernel type. Reported-by: Ravi Bangoria <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Kim Phillips <[email protected]> Tested-by: Ravi Bangoria <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.