| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are places that check whether target task/cpu is given or not and
some of them didn't check newly introduced uid or cpu list. Add and use
three of helper functions to treat them properly.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_target__strerror() sets @buf to a string that describes the
(perf_target-specific) error condition that is passed via @errnum.
This is similar to strerror_r() and does same thing if @errnum has a
standard errno value.
Signed-off-by: Namhyung Kim <[email protected]>
Suggested-by: Arnaldo Carvalho de Melo <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ committer note: No need to use PERF_ERRNO_TARGET__SUCCESS, use shorter idiom ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add and use the modern perf_target__parse_uid() and get rid of the old
parse_target_uid().
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_target_errno enumerations are used to indicate specific error
cases on perf target operations. It'd help libperf being a more generic
library.
Signed-off-by: Namhyung Kim <[email protected]>
Suggested-by: Arnaldo Carvalho de Melo <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, 'perf record -- sleep 1' creates a cpu map for all online
cpus since it turns out calling cpu_map__new(NULL). Fix it.
Also it is guaranteed that cpu_list is NULL if PID/TID is given by
calling perf_target__validate(), so we can make the conditional bit
simpler.
This also fixes perf test 7 (Validate) failure on my 6 core machine:
$ cat /sys/devices/system/cpu/online
0-11
$ ./perf test -v 7
7: Validate PERF_RECORD_* events & perf_sample fields:
--- start ---
perf_evlist__mmap: Operation not permitted
---- end ----
Validate PERF_RECORD_* events & perf_sample fields: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Check if neither of --pid, --tid or --uid was specified and if so, set
system_wide appropriately.
Namhyung's patch would make using any of the above target specifiers
emit a warning in perf_target__validate, since it would see
target.system_wide set and one of the others as well.
So set system_wide after validation.
Suggested-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We don't know what types of warnings different versions of flex
and bison combined with different versions of gcc is going to
generate, so just punt and don't warn about anything.
This fixes the build of perf for me on an openSUSE 12.1 system.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Currently if we cannot decide the size of the event, we guess next
event possition by:
"... check alignment, and increment a single u64 in the hope
to catch on again 'soon'"
This usually ends up with segfault or endless loop. It's better
to admit the failure right away, then pretend nothing happened.
It makes the life easier ;)
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Gets confusing. Remains to be chosen an appropriate different color for
source code.
This effectively reverts 58e817d997d1 ("perf annotate: Print asm code as
blue when source code is displayed")
Requested-by: Peter Zijlstra <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The first column (columns in the near future) are for the per line event
overhead(s), that only appear when they are not zero.
To clearly separate it, add back a solid vertical line, with just one
colour, not influenced by the per line overheads.
Then have the addr/offset column, then optionally the dynamic
(static in the future) jump->target arrows, if 'j' enables it.
Then the instructions.
Requested-by: Peter Zijlstra <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If gtk2 support is not enabled (or failed for some reason) try TUI again
instead of falling directly back to the stdio interface.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now setup_browser can handle gtk2 front-end so split the TUI code to
ui/tui/setup.c in order to remove dependency.
To this end, make ui__init/exit global symbols and take an argument.
Also split gtk code to ui/gtk/setup.c.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We use double underscore characters to distinguish its subsystem and
actual function name.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As perf doesn't allow to specify gtk command-line option, drop the
arguments and pass NULL to gtk_init().
This makes the function easier to be called from setup_browser().
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The setup_browser contained newt-related codes in it.
As gtk front-end added recently, it should be more generic to handle
both cases properly.
So move newt codes to the ui__init() for now.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For further work on perf_target, it'd be better off splitting the code
into a separate file.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ committer note: Fixed perl build by using stdbool and types.h in target.h ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There were some combinations of these switches that are not so
appropriate IMHO.
Since there are implicit priorities between them and they worked well
anyway, but it ends up opening useless duplicated events.
For example, 'perf stat -t <pid> -a' will open multiple events for the
thread instead of one.
Add explicit checks and warn user in perf_target__validate().
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now we have all information that needed to create cpu/thread maps in
struct perf_target, it'd be better using it as an argument.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_target__validate function is used to check given PID/TID/UID/CPU
target options and warn if some combination is impossible. Also this can
make some arguments of parse_target_uid() function useless as it is checked
before the call via our new helper.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use struct perf_target as it is introduced by previous patch.
This is a preparation of further changes.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use struct perf_target as it is introduced by previous patch.
This is a preparation of further changes.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_target struct will be used for taking care of cpu/thread maps
based on user's input. Since it is used on various subcommands it'd
better factoring it out.
Thanks to Arnaldo for suggesting the better name.
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Include header fixes for
... bool:
util/parse-events.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘have_tracepoints’
... and types.h:
util/parse-events.h:28: error: expected ‘)’ before ‘config’
util/parse-events.h:34: error: expected declaration specifiers or ‘...’ before ‘u64’
util/parse-events.h:45: error: expected ‘)’ before ‘type’
This happens if now other include files are included before
util/parse-events.h.
Signed-off-by: Robert Richter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It was unconditionally printing debug stuff when in non -v mode we
should just print the name and result of the test.
Now:
[root@sandy ~]# perf test rdpmc
6: x86 rdpmc test: Ok
[root@sandy ~]# perf test -v rdpmc
6: x86 rdpmc test:
--- start ---
0: 6030
1: 60030
2: 600050
3: 6000056
4: 60000070
5: 600000266
---- end ----
x86 rdpmc test: Ok
[root@sandy ~]#
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
By default, perf stat sets exclude_guest = 1. But when you run perf on a
kernel which does not support host/guest filtering, then you get an
error saying the event in unsupported. This comes from the fact that
when the perf_event_attr struct passed by the user is larger than the
one known to the kernel there is safety check which ensures that all
unknown bits are zero. But here, exclude_guest is 1 (part of the unknown
bits) and thus the perf_event_open() syscall return EINVAL.
To my surprise, running perf record on the same kernel did not exhibit
the problem. The reason is that perf record handles the problem by
catching the error and retrying with guest/host excludes set to zero.
For some reason, this was not done with perf stat. This patch fixes this
problem.
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Gleb Natapov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robert Richter <[email protected]>
Link: http://lkml.kernel.org/r/20120427124538.GA7230@quad
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The filename is a pointer variable so the sizeof(filename) will return
length of a pointer. Fix it by using 'size'.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Cleaning up more the output.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is confusing when used with jump -> target lines.
Requested-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of trying to show the current loop by naively looking for the
next backward jump, just use 'j' to toggle showing arrows connecting
jump with its target.
And do it for forward jumps as well.
Loop detection requires more code to follow the flow control, etc.
Reported-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It figures out the direction and draws downwards arrows too if that is
the case.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The counterpart of 'ret' instructions.
Suggested-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Annotation improvements:
Now the default annotate browser uses a much more compact format, implementing
suggestions made made by several people, notably Linus.
Here is part of the new __list_del_entry() annotation:
__list_del_entry
8.47 │ push %rbp
8.47 │ mov (%rdi),%rdx
20.34 │ mov $0xdead000000100100,%rcx
3.39 │ mov 0x8(%rdi),%rax
0.00 │ mov %rsp,%rbp
1.69 │ cmp %rcx,%rdx
0.00 │ je 43
1.69 │ mov $0xdead000000200200,%rcx
3.39 │ cmp %rcx,%rax
0.00 │ je a3
5.08 │ mov (%rax),%r8
18.64 │ cmp %r8,%rdi
0.00 │ jne 84
1.69 │ mov 0x8(%rdx),%r8
25.42 │ cmp %r8,%rdi
0.00 │ jne 65
1.69 │ mov %rax,0x8(%rdx)
0.00 │ mov %rdx,(%rax)
0.00 │ leaveq
0.00 │ retq
0.00 │ 43: mov %rdx,%r8
0.00 │ mov %rdi,%rcx
0.00 │ mov $0xffffffff817cd6a8,%rdx
0.00 │ mov $0x31,%esi
0.00 │ mov $0xffffffff817cd6e0,%rdi
0.00 │ xor %eax,%eax
0.00 │ callq ffffffff8104eab0 <warn_slowpath_fmt>
0.00 │ leaveq
0.00 │ retq
0.00 │ 65: mov %rdi,%rcx
0.00 │ mov $0xffffffff817cd780,%rdx
0.00 │ mov $0x3a,%esi
0.00 │ mov $0xffffffff817cd6e0,%rdi
0.00 │ xor %eax,%eax
0.00 │ callq ffffffff8104eab0 <warn_slowpath_fmt>
0.00 │ leaveq
0.00 │ retq
The infrastructure is there to provide formatters for any instruction,
like the one I'll do for call functions to elide the address.
Further fixes on top of the first iteration:
- Sometimes a jump points to an offset with no instructions, make the
mark jump targets function handle that, for now just ignoring such
jump targets, more investigation is needed to figure out how to cope
with that.
- Handle jump targets that are outside the function, for now just don't
try to draw the connector arrow, right thing seems to be to mark this
jump with a -> (right arrow) and handle it like a callq.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
As described in the previous patch. Next step is to properly label those
jumps by using a -> arrow, i.e. not backwards/forwards, and allow the
user to navigate to this other function when enter or -> is pressed.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
I.e. jumps that go to code outside the current function, that is denoted
in objdump -dS as:
399f877a9f: jne 399f87bcf4 <_L_lock_5154>
I.e. without the + after the name of the current function, like in:
399f877aa5: jmp 399f877ab2 <_int_free+0x412>
The browser will use that info to avoid drawing connectors to the start
of the function, since ops.target.addr was zero.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As libtraceevent will be a library, having struct record is far
too generic of a name to use. Renaming it to be consistent with the
rest of the functions will be a better long term solution.
Signed-off-by: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Arun Sharma <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
libtraceevent library prints out in usecs but perf wants to print out
in nsecs. Add a flag that lets the user decide to print out in usec
or nsec times.
Signed-off-by: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Arun Sharma <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
The event parsing code in perf was originally copied from trace-cmd
but never was kept up-to-date with the changes that was done there.
The trace-cmd libtraceevent.a code is much more mature than what is
currently in perf.
This updates the code to use wrappers to handle the calls to the
new event parsing code. The new code requires a handle to be pass
around, which removes the global event variables and allows
more than one event structure to be read from different files
(and different machines).
But perf still has the old global events and the code throughout
perf does not yet have a nice way to pass around a handle.
A global 'pevent' has been made for perf and the old calls have
been created as wrappers to the new event parsing code that uses
the global pevent.
With this change, perf can later incorporate the pevent handle into
the perf structures and allow more than one file to be read and
compared, that contains different events.
Signed-off-by: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Arun Sharma <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Have building perf also build libtraceevent.a. Currently, perf does
not use the code within libtraceevent.a, but it soon will.
Signed-off-by: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Arun Sharma <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
We were using ins_ops->target for callq addresses and jump offsets,
disambiguate by having ins_ops->target.addr and ins_ops->target.offset.
For jumps we'll need both to fixup lines that don't have an offset on
the <> part.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In annotate_browser__mark_jump_targets
702 dlt = browser->offsets[dl->ops.target];
703 bdlt = disasm_line__browser(dlt);
704 bdlt->jump_target = true;
705 }
706
707 }
(gdb) p size
$5 = 2415
(gdb) p offset
$6 = 140
(gdb) p dl->ops.target
$7 = 143
(gdb) p browser->offsets[143]
$8 = (struct disasm_line *) 0x0
(gdb) p dl->name
$9 = 0x2363bd0 "je"
(gdb)
Really strange, the code assumed that at the jump target we would have
an assembly line, but only in the previous instruction offset we have a
'lock':
(gdb) p browser->offsets[144]
$10 = (struct disasm_line *) 0x0
(gdb) p browser->offsets[142]
$11 = (struct disasm_line *) 0x27bd620
(gdb) p browser->offsets[142]->name
$12 = 0x237a8a0 "lock"
(gdb)
I'll study this more, but for now I'll just check if there is a
disasm_line at dl->ops.target, i.e. a valid jump target.
Reported-by: Hagen Paul Pfeifer <[email protected]>
Reported-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move the trace-event-parse.c code that originally came from trace-cmd into
their own files. The new file will be called trace-parse-events.c, as
the name of trace-cmd's file was parse-events.c too, but it conflicted
with the parse-events.c file in perf that parses the command line.
This tries to update the code with mimimal changes.
Perf specific code stays in the trace-event-parse.[ch] files and
the common parsing code is now in trace-parse-events.c and
trace-parse-events.h.
Signed-off-by: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Arun Sharma <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Merge v3.4-rc4 - we were on -rc2 before.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Simple algorithm, just look for the next backward jump that points to
before the cursor.
Then draw an arrow connecting the jump to its target.
Do this as you move the cursor, entering/exiting possible loops.
Ex (graph chars replaced to avoid mail encoding woes):
avc_has_perm_flags
0.00 | nopl 0x0(%rax)
5.36 |+-> 68: mov (%rax),%rax
5.15 || test %rax,%rax
0.00 || v je 130
2.96 || 74: cmp -0x20(%rax),%ebx
47.38 || lea -0x20(%rax),%rcx
0.28 || ^ jne 68
3.16 || cmp -0x18(%rax),%dx
0.00 |+------^ jne 68
4.92 | cmp 0x4(%rcx),%r13d
0.00 | v jne 68
1.15 | test %rcx,%rcx
0.00 | v je 130
Suggested-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The if branch is completely unnecessary since 'realloc' handles NULL
pointers for the first parameter.
This is really only a cleanup and submitted mainly to prevent
proliferation of bad practices.
Signed-off-by: Ulrich Drepper <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robert Richter <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To save typing on the switch char set slang stuff.
It also helps in removing more slang direct calls, wrapping them at the
ui_browser level, where at some point I'll try to implement those in
terms of GTK+.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
By just returning to the previous function being annotated or to the top
main screen when popping out the base of the annotation stack.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Just use a left arrow prefixing retqs.
Requested-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using up/down arrows just before the instruction, replacing the actual chars
with approximations to avoid mail encoding snafus:
avtab_search_node
0.00 | push %rbp
0.00 | mov %rsp,%rbp
0.00 | callq mcount
0.00 | movzwl 0x6(%rsi),%edx
0.00 | and $0x7fff,%dx
0.00 | test %rdi,%rdi
0.00 | v jne 20
0.00 | 17: xor %eax,%eax
0.00 | 19: leaveq
0.00 | retq
0.00 | nopl 0x0(%rax,%rax,1)
0.00 | 20: mov (%rdi),%rax
0.00 | test %rax,%rax
0.00 | ^ je 17
0.00 | movzwl (%rsi),%ecx
0.00 | movzwl 0x2(%rsi),%r9d
0.00 | movzwl 0x4(%rsi),%r8d
0.00 | movzwl %cx,%esi
0.00 | movzwl %r9w,%r10d
0.00 | shl $0x9,%esi
0.00 | lea (%rsi,%r10,4),%esi
0.00 | lea (%r8,%rsi,1),%esi
0.00 | and 0x10(%rdi),%si
0.00 | movzwl %si,%esi
0.00 | mov (%rax,%rsi,8),%rax
0.00 | test %rax,%rax
0.00 | ^ je 19
0.00 | nopw 0x0(%rax,%rax,1)
0.00 | 60: cmp %cx,(%rax)
0.00 | v jne 7e
0.00 | cmp %r9w,0x2(%rax)
0.00 | v jne 7e
0.00 | cmp %r8w,0x4(%rax)
0.00 | v jne 79
0.00 | test %dx,0x6(%rax)
0.00 | ^ jne 19
0.00 | 79: cmp %r8w,0x4(%rax)
93.04 | 7e:^ ja 17
2.53 | mov 0x10(%rax),%rax
4.43 | test %rax,%rax
0.00 | ^ jne 60
0.00 | leaveq
0.00 | retq
Next low hanging fruit is to use left arrow for retqs, then work on clearling
marking loops.
Requested-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
0.00 | callq ffffffff8112f190 <__mod_zone_page_state>
Becomes:
0.00 | callq __mod_zone_page_state
But if you press 'o' it gets verbose, i.e. as in objdump -dS:
0.00 | ffffffff8116bdda: callq ffffffff8112f190 <__mod_zone_page_state>
Requested-by: Linus Torvalds <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|