aboutsummaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)AuthorFilesLines
2018-07-31perf evlist: Fix error out while applying initial delay and LBRKan Liang1-0/+14
'perf record' will error out if both --delay and LBR are applied. For example: # perf record -D 1000 -a -e cycles -j any -- sleep 2 Error: dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' # A dummy event is added implicitly for initial delay, which has the same configurations as real sampling events. The dummy event is a software event. If LBR is configured, perf must error out. The dummy event will only be used to track PERF_RECORD_MMAP while perf waits for the initial delay to enable the real events. The BRANCH_STACK bit can be safely cleared for the dummy event. After applying the patch: # perf record -D 1000 -a -e cycles -j any -- sleep 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ] # Reported-by: Sunil K Pandey <[email protected]> Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-31perf trace beauty: Default header_dir to cwd to work without parmsArnaldo Carvalho de Melo9-17/+18
Useful when checking the effects of header synchs for the files it uses as a input to generate string tables, in retrospect this is how it should've been done from day 1, not requiring the header_dir to be set on the Makefile, will change everything later, so that the only parm, common to all generators will be $(srctree) and $(beauty_outdir). So, to see what it generates, just call it without any parameters: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh static const char *vhost_virtio_ioctl_cmds[] = { [0x00] = "SET_FEATURES", [0x01] = "SET_OWNER", [0x02] = "RESET_OWNER", [0x03] = "SET_MEM_TABLE", [0x04] = "SET_LOG_BASE", [0x07] = "SET_LOG_FD", [0x10] = "SET_VRING_NUM", [0x11] = "SET_VRING_ADDR", [0x12] = "SET_VRING_BASE", [0x13] = "SET_VRING_ENDIAN", [0x14] = "GET_VRING_ENDIAN", [0x20] = "SET_VRING_KICK", [0x21] = "SET_VRING_CALL", [0x22] = "SET_VRING_ERR", [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT", [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT", [0x30] = "NET_SET_BACKEND", [0x40] = "SCSI_SET_ENDPOINT", [0x41] = "SCSI_CLEAR_ENDPOINT", [0x42] = "SCSI_GET_ABI_VERSION", [0x43] = "SCSI_SET_EVENTS_MISSED", [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", }; $ Or: $ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh static const char *sndrv_pcm_ioctl_cmds[] = { [0x00] = "PVERSION", [0x01] = "INFO", [0x02] = "TSTAMP", [0x03] = "TTSTAMP", [0x04] = "USER_PVERSION", [0x10] = "HW_REFINE", [0x11] = "HW_PARAMS", [0x12] = "HW_FREE", [0x13] = "SW_PARAMS", [0x20] = "STATUS", [0x21] = "DELAY", [0x22] = "HWSYNC", [0x23] = "SYNC_PTR", [0x24] = "STATUS_EXT", [0x32] = "CHANNEL_INFO", [0x40] = "PREPARE", [0x41] = "RESET", [0x42] = "START", [0x43] = "DROP", [0x44] = "DRAIN", [0x45] = "PAUSE", [0x46] = "REWIND", [0x47] = "RESUME", [0x48] = "XRUN", [0x49] = "FORWARD", [0x50] = "WRITEI_FRAMES", [0x51] = "READI_FRAMES", [0x52] = "WRITEN_FRAMES", [0x53] = "READN_FRAMES", [0x60] = "LINK", [0x61] = "UNLINK", }; $ Etc. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-31Merge remote-tracking branch 'tip/perf/urgent' into perf/coreArnaldo Carvalho de Melo8-0/+31
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-30perf tools: Fix the build on the alpine:edge distroArnaldo Carvalho de Melo5-0/+5
The UAPI file byteorder/little_endian.h uses the __always_inline define without including the header where it is defined, linux/stddef.h, this ends up working in all the other distros because that file gets included seemingly by luck from one of the files included from little_endian.h. But not on Alpine:edge, that fails for all files where perf_event.h is included but linux/stddef.h isn't include before that. Adding the missing linux/stddef.h file where it breaks on Alpine:edge to fix that, in all other distros, that is just a very small header anyway. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-30tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'Arnaldo Carvalho de Melo3-0/+26
To cope with the changes in: 12c89130a56a ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling") 60622d68227d ("x86/asm/memcpy_mcsafe: Return bytes remaining") bd131544aa7e ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling") da7bc9c57eb0 ("x86/asm/memcpy_mcsafe: Remove loop unrolling") This needed introducing a file with a copy of the mcsafe_handle_tail() function, that is used in the new memcpy_64.S file, as well as a dummy mcsafe_test.h header. Testing it: $ nm ~/bin/perf | grep mcsafe 0000000000484130 T mcsafe_handle_tail 0000000000484300 T __memcpy_mcsafe $ $ perf bench mem memcpy # Running 'mem/memcpy' benchmark: # function 'default' (Default memcpy() provided by glibc) # Copying 1MB bytes ... 44.389205 GB/sec # function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 22.710756 GB/sec # function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 42.459239 GB/sec # function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 42.459239 GB/sec $ This silences this perf tools build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' Cc: Adrian Hunter <[email protected]> Cc: Dan Williams <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mika Penttilä <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Tony Luck <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf test: Fix subtest number when showing resultsThomas Richter1-1/+1
Perf test 40 for example has several subtests numbered 1-4 when displaying the start of the subtest. When the subtest results are displayed the subtests are numbered 0-3. Use this command to generate trace output: [root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1 Fix this by adjusting the subtest number when show the subtest result. Output before: [root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1 40.1: Basic BPF filtering : BPF filter subtest 0: Ok 40.2: BPF pinning : BPF filter subtest 1: Ok 40.3: BPF prologue generation : BPF filter subtest 2: Ok 40.4: BPF relocation checker : BPF filter subtest 3: Ok [root@s35lp76 perf]# Output after: root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1 40.1: Basic BPF filtering : BPF filter subtest 1: Ok 40.2: BPF pinning : BPF filter subtest 2: Ok 40.3: BPF prologue generation : BPF filter subtest 3: Ok 40.4: BPF relocation checker : BPF filter subtest 4: Ok [root@s35lp76 ~]# Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf stat: Get rid of extra clock display functionJiri Olsa4-49/+21
There's no reason to have separate function to display clock events. It's only purpose was to convert the nanosecond value into microseconds. We do that now in generic code, if the unit and scale values are properly set, which this patch do for clock events. The output differs in the unit field being displayed in its columns rather than having it added as a suffix of the event name. Plus the value is rounded into 2 decimal numbers as for any other event. Before: # perf stat -e cpu-clock,task-clock -C 0 sleep 3 Performance counter stats for 'CPU(s) 0': 3001.123137 cpu-clock (msec) # 1.000 CPUs utilized 3001.133250 task-clock (msec) # 1.000 CPUs utilized 3.001159813 seconds time elapsed Now: # perf stat -e cpu-clock,task-clock -C 0 sleep 3 Performance counter stats for 'CPU(s) 0': 3,001.05 msec cpu-clock # 1.000 CPUs utilized 3,001.05 msec task-clock # 1.000 CPUs utilized 3.001077794 seconds time elapsed There's a small difference in csv output, as we now output the unit field, which was empty before. It's in the proper spot, so there's no compatibility issue. Before: # perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3 3001.065177,,cpu-clock,3001064187,100.00,1.000,CPUs utilized 3001.077085,,task-clock,3001077085,100.00,1.000,CPUs utilized # perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3 3000.80,msec,cpu-clock,3000799026,100.00,1.000,CPUs utilized 3000.80,msec,task-clock,3000799550,100.00,1.000,CPUs utilized Add perf_evsel__is_clock to replace nsec_counter. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tools: Use perf_evsel__match instead of open coded equivalentJiri Olsa1-4/+1
Use perf_evsel__match() helper in perf_evsel__is_bpf_output(). Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tools: Fix struct comm_str removal crashJiri Olsa1-5/+11
We occasionaly hit following assert failure in 'perf top', when processing the /proc info in multiple threads. perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: [Switching to Thread 0x7ffff11ba700 (LWP 13749)] 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0) at ...include/linux/refcount.h:109 #5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0) at util/comm.c:24 #6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:72 #7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:95 #8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2", timestamp=0, exec=false) at util/comm.c:111 #9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57 #10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457 #11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... The problem is that we keep global comm_str_root list, which is accessed by multiple threads during the 'perf top' startup and following 2 paths can race: thread 1: ... thread__new comm__new comm_str__findnew down_write(&comm_str_lock); __comm_str__findnew comm_str__get thread 2: ... comm__override or comm__free comm_str__put refcount_dec_and_test down_write(&comm_str_lock); rb_erase(&cs->rb_node, &comm_str_root); Because thread 2 first decrements the refcnt and only after then it removes the struct comm_str from the list, the thread 1 can find this object on the list with refcnt equls to 0 and hit the assert. This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects that already dropped the refcnt to 0. For the rest of the objects we take the refcnt before comparing its name and release it afterwards with comm_str__put, which can also release the object completely. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Kan Liang <[email protected]> Cc: Lukasz Odzioba <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf machine: Use last_match threads cache only in single thread modeJiri Olsa1-3/+22
There's an issue with using threads::last_match in multithread mode which is enabled during the perf top synthesize. It might crash with following assertion: perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535ff9 in refcount_inc (r=0x7fffe8009a70) at ...include/linux/refcount.h:109 #5 0x0000000000536771 in thread__get (thread=0x7fffe8009a40) at util/thread.c:115 #6 0x0000000000523cd0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:432 #7 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, pid=2, tid=2) at util/machine.c:489 #8 0x0000000000523f24 in machine__findnew_thread (machine=0xbfde38, pid=2, tid=2) at util/machine.c:499 #9 0x0000000000526fbe in machine__process_fork_event (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... the problem is that we don't serialize access to threads::last_match. We serialize the access to the threads tree, but we don't care how's threads::last_match being accessed. Both locked/unlocked paths use that data and can set it. In multithreaded mode we can end up with invalid object in thread__get call, like in following paths race: thread 1 ... machine__findnew_thread down_write(&threads->lock); __machine__findnew_thread ____machine__findnew_thread th = threads->last_match; if (th->tid == tid) { thread__get thread 2 ... machine__find_thread down_read(&threads->lock); __machine__findnew_thread ____machine__findnew_thread th = threads->last_match; if (th->tid == tid) { thread__get thread 3 ... machine__process_fork_event machine__remove_thread __machine__remove_thread threads->last_match = NULL thread__put thread__put Thread 1 and 2 might got stale last_match, before thread 3 clears it. Thread 1 and 2 then race with thread 3's thread__put and they might trigger the refcnt == 0 assertion above. The patch is disabling the last_match cache for multiple thread mode. It was originally meant for single thread scenarios, where it's common to have multiple sequential searches of the same thread. In multithread mode this does not make sense, because top's threads processes different /proc entries and so the 'struct threads' object is queried for various threads. Moreover we'd need to add more locks to make it work. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Kan Liang <[email protected]> Cc: Lukasz Odzioba <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf machine: Add threads__set_last_match functionJiri Olsa1-3/+9
Separating threads::last_match cache set into separate threads__set_last_match function. This will be useful in following patch. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Kan Liang <[email protected]> Cc: Lukasz Odzioba <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf machine: Add threads__get_last_match functionJiri Olsa1-13/+26
Separating threads::last_match cache read/check into separate threads__get_last_match function. This will be useful in following patch. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Kan Liang <[email protected]> Cc: Lukasz Odzioba <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tools: Synthesize GROUP_DESC feature in pipe modeJiri Olsa1-1/+1
Stephan reported, that pipe mode does not carry the group information and thus the piped report won't display the grouped output for following command: # perf record -e '{cycles,instructions,branches}' -a sleep 4 | perf report It has no idea about the group setup, so it will display events separately: # Overhead Command Shared Object ... # ........ ............... ....................... # 6.71% swapper [kernel.kallsyms] 2.28% offlineimap libpython2.7.so.1.0 0.78% perf [kernel.kallsyms] ... Fix GROUP_DESC feature record to be synthesized in pipe mode, so the report output is grouped if there are groups defined in record: # Overhead Command Shared ... # ........................ ............... ....... # 7.57% 0.16% 0.30% swapper [kernel 1.87% 3.15% 2.46% offlineimap libpyth 1.33% 0.00% 0.00% perf [kernel ... Reported-by: Stephane Eranian <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Stephane Eranian <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: David Carrillo-Cisneros <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf script: Show correct offsets for DWARF-based unwindingSandipan Das3-3/+10
When perf/data is recorded with the dwarf call-graph option, the callchain shown by 'perf script' still shows the binary offsets of the userspace symbols instead of their virtual addresses. Since the symbol offset calculation is based on using virtual address as the ip, we see incorrect offsets as well. The use of virtual addresses affects the ability to find out the line number in the corresponding source file to which an address maps to as described in commit 67540759151a ("perf unwind: Use addr_location::addr instead of ip for entries"). This has also been addressed by temporarily converting the virtual address to the correponding binary offset so that it can be mapped to the source line number correctly. This is a follow-up for commit 19610184693c ("perf script: Show virtual addresses instead of offsets"). This can be verified on a powerpc64le system running Fedora 27 as shown below: # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton # perf record -e probe_libc:inet_pton --call-graph=dwarf ping -6 -c 1 ::1 Before: # perf report --stdio --no-children -s sym,srcline -g address # Samples: 1 of event 'probe_libc:inet_pton' # Event count (approx.): 1 # # Overhead Symbol Source:Line # ........ .................... ........... # 100.00% [.] __GI___inet_pton inet_pton.c | ---gaih_inet getaddrinfo.c:537 (inlined) __GI_getaddrinfo getaddrinfo.c:2304 (inlined) main ping.c:519 generic_start_main libc-start.c:308 (inlined) __libc_start_main libc-start.c:102 ... # perf script -F comm,ip,sym,symoff,srcline,dso ping 15af28 __GI___inet_pton+0xffff000099160008 (/usr/lib64/libc-2.26.so) libc-2.26.so[ffff80004ca0af28] 10fa53 gaih_inet+0xffff000099160f43 libc-2.26.so[ffff80004c9bfa53] (inlined) 1105b3 __GI_getaddrinfo+0xffff000099160163 libc-2.26.so[ffff80004c9c05b3] (inlined) 2d6f main+0xfffffffd9f1003df (/usr/bin/ping) ping[fffffffecf882d6f] 2369f generic_start_main+0xffff00009916013f libc-2.26.so[ffff80004c8d369f] (inlined) 23897 __libc_start_main+0xffff0000991600b7 (/usr/lib64/libc-2.26.so) libc-2.26.so[ffff80004c8d3897] After: # perf report --stdio --no-children -s sym,srcline -g address # Samples: 1 of event 'probe_libc:inet_pton' # Event count (approx.): 1 # # Overhead Symbol Source:Line # ........ .................... ........... # 100.00% [.] __GI___inet_pton inet_pton.c | ---gaih_inet.constprop.7 getaddrinfo.c:537 getaddrinfo getaddrinfo.c:2304 main ping.c:519 generic_start_main.isra.0 libc-start.c:308 __libc_start_main libc-start.c:102 ... # perf script -F comm,ip,sym,symoff,srcline,dso ping 7fffb38aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) inet_pton.c:68 7fffb385fa53 gaih_inet.constprop.7+0xf43 (/usr/lib64/libc-2.26.so) getaddrinfo.c:537 7fffb38605b3 getaddrinfo+0x163 (/usr/lib64/libc-2.26.so) getaddrinfo.c:2304 130782d6f main+0x3df (/usr/bin/ping) ping.c:519 7fffb377369f generic_start_main.isra.0+0x13f (/usr/lib64/libc-2.26.so) libc-start.c:308 7fffb3773897 __libc_start_main+0xb7 (/usr/lib64/libc-2.26.so) libc-start.c:102 Signed-off-by: Sandipan Das <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Milian Wolff <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Ravi Bangoria <[email protected]> Fixes: 67540759151a ("perf unwind: Use addr_location::addr instead of ip for entries") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf trace arm64: Use generated syscall tableKim Phillips2-0/+6
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. It also enables users to specify wildcards, for example, perf trace -e 'open*', just like was already possible on x86, s390, and powerpc, which means arm64 can now pass the "Check open filename arg using perf trace + vfs_getname" test. Signed-off-by: Kim Phillips <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf arm64: Generate system call table from asm/unistd.hKim Phillips2-0/+83
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. Using the existing other arch scripts resulted in this error: tools/perf/arch/arm64/entry/syscalls//mksyscalltbl: 25: printf: __NR3264_ftruncate: expected numeric value because, unlike other arches, asm-generic's unistd.h does things like: #define __NR_ftruncate __NR3264_ftruncate Turning the scripts printf's %d into a %s resulted in this in the generated syscalls.c file: static const char *syscalltbl_arm64[] = { [__NR3264_ftruncate] = "ftruncate", So we use the host C compiler to fold the macros, and print them out from within a temporary C program, in order to get the correct output: static const char *syscalltbl_arm64[] = { [46] = "ftruncate", Committer notes: Testing this with a container with an old toolchain breaks because it ends up using the system's /usr/include/asm-generic/unistd.h, included from tools/arch/arm64/include/uapi/asm/unistd.h when what is desired is for it to include tools/include/uapi/asm-generic/unistd.h. Since all that tools/arch/arm64/include/uapi/asm/unistd.h is to set a define and then include asm-generic/unistd.h, do that directly and use tools/include/uapi/asm-generic/unistd.h as the file to get the syscall definitions to expand. Testing it: tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/include/uapi/asm-generic/unistd.h Now works and generates in the syscall string table. Before it ended up as: $ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/arch/arm64/include/uapi/asm/unistd.h static const char *syscalltbl_arm64[] = { <stdin>: In function 'main': <stdin>:257:38: error: '__NR_getrandom' undeclared (first use in this function) <stdin>:257:38: note: each undeclared identifier is reported only once for each function it appears in <stdin>:258:41: error: '__NR_memfd_create' undeclared (first use in this function) <stdin>:259:32: error: '__NR_bpf' undeclared (first use in this function) <stdin>:260:37: error: '__NR_execveat' undeclared (first use in this function) tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: 47: tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: /tmp/create-table-60liya: Permission denied }; $ Signed-off-by: Kim Phillips <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24tools include: Grab copies of arm64 dependent unistd.h filesKim Phillips1-0/+2
Will be used for generating the syscall id/string translation table. The arm64 unistd.h file simply #includes the asm-generic/unistd.h, so, since we will want to know whether either change, we grab both: arch/arm64/include/uapi/asm/unistd.h and include/uapi/asm-generic/unistd.h Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tests: Fix record+probe_libc_inet_pton.sh when event existsSandipan Das1-4/+24
If the event 'probe_libc:inet_pton' already exists, this test fails and deletes the existing event before exiting. This will then pass for any subsequent executions. Instead of skipping to deleting the existing event because of failing to add a new event, a duplicate event is now created and the script continues with the usual checks. Only the new duplicate event that is created at the beginning of the test is deleted as a part of the cleanups in the end. All existing events remain as it is. This can be observed on a powerpc64 system running Fedora 27 as shown below. # perf probe -x /usr/lib64/power8/libc-2.26.so -a inet_pton Added new event: probe_libc:inet_pton (on inet_pton in /usr/lib64/power8/libc-2.26.so) Before: # perf test -v "probe libc's inet_pton & backtrace it with ping" 62: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 21302 test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! # perf probe --list After: # perf test -v "probe libc's inet_pton & backtrace it with ping" 62: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 21490 ping 21513 [035] 39357.565561: probe_libc:inet_pton_1: (7fffa4c623b0) 7fffa4c623b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so) 7fffa4c190dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so) 7fffa4c19c4c getaddrinfo+0x15c (/usr/lib64/power8/libc-2.26.so) 111d93c20 main+0x3e0 (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok # perf probe --list probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so) Signed-off-by: Sandipan Das <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: http://lkml.kernel.org/r/e11fecff96e6cf4c65cdbd9012463513d7b8356c.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tests: Fix record+probe_libc_inet_pton.sh to ensure cleanupsSandipan Das1-1/+1
If there is a mismatch in the perf script output, this test fails and exits before the event and temporary files created during its execution are cleaned up. This can be observed on a powerpc64 system running Fedora 27 as shown below. # perf test -v "probe libc's inet_pton & backtrace it with ping" 62: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 18655 ping 18674 [013] 24511.496995: probe_libc:inet_pton: (7fffa6b423b0) 7fffa6b423b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so) 7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so) FAIL: expected backtrace entry "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/power8/libc-2.26.so\)$" got "7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! # ls /tmp/expected.* /tmp/perf.data.* /tmp/perf.script.* /tmp/expected.u31 /tmp/perf.data.Pki /tmp/perf.script.Bhs # perf probe --list probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so) Cleanup of the event and the temporary files are now ensured by allowing the cleanup code to be executed even if the lines from the backtrace do not match their expected patterns instead of simply exiting from the point of failure. Signed-off-by: Sandipan Das <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: http://lkml.kernel.org/r/ce9fb091dd3028fba8749a1a267cfbcb264bbfb1.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64Sandipan Das1-0/+6
For powerpc64, this test currently fails due to a mismatch in the expected output. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf test -v "probe libc's inet_pton & backtrace it with ping" Before: 62: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 23948 ping 23965 [003] 71136.075084: probe_libc:inet_pton: (7fff996aaf28) 7fff996aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) FAIL: expected backtrace entry 2 "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc-2.26.so\)$" got "7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! After: 62: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 24638 ping 24655 [001] 71208.525396: probe_libc:inet_pton: (7fffa245af28) 7fffa245af28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa240fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa24105b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 138d52d70 main+0x3e0 (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by: Sandipan Das <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Maynard Johnson <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record") Link: http://lkml.kernel.org/r/49621ec5f37109f0655e5a8c32287ad68d85a1e5.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf powerpc: Fix callchain ip filtering when return address is in a registerSandipan Das1-2/+6
For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by: Ravi Bangoria <[email protected]> Signed-off-by: Sandipan Das <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Maynard Johnson <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf powerpc: Fix callchain ip filteringSandipan Das1-1/+1
For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by: Sandipan Das <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Maynard Johnson <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf list: Add missing documentation for --desc and --debug optionsSangwon Hong1-1/+7
Add missing documentation for --desc and --debug options to the 'perf list' man page. Signed-off-by: Sangwon Hong <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Clarify that --desc is by default active ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf kvm: Fix subcommands on s390Thomas Richter1-1/+1
With commit eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") s390 platform provides detailed type/model/capacity information in the CPU identifier string instead of just "IBM/S390". This breaks 'perf kvm' support which uses hard coded string IBM/S390 to compare with the CPU identifier string. Fix this by changing the comparison. Reported-by: Stefan Raspl <[email protected]> Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Tested-by: Stefan Raspl <[email protected]> Acked-by: Christian Borntraeger <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: [email protected] Fixes: eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf stat: Add transaction flag (-T) support for s390Thomas Richter3-0/+35
The 'perf stat' command line flag -T to display transaction counters is currently supported for x86 only. Add support for s390. It is based on the metrics flag -M transaction using the architecture dependent JSON files. This requires a metric named "transaction" in the JSON files for the platform. Introduce a new function metricgroup__has_metric() to check for the existence of a metric_name transaction. As suggested by Andi Kleen, this is the new approach to support transactions counters. Other architectures will follow. Output before: [root@p23lp27 perf]# ./perf stat -T -- sleep 1 Cannot set up transaction events [root@p23lp27 perf]# Output after: [root@s35lp76 perf]# ./perf stat -T -- ~/mytesttx 1 >/tmp/111 Performance counter stats for '/root/mytesttx 1': 1 tx_c_tend # 13.0 transaction 1 tx_nc_tend 11 tx_nc_tabort 0 tx_c_tabort_special 0 tx_c_tabort_no_special 0.001070109 seconds time elapsed [root@s35lp76 perf]# Suggested-by: Andi Kleen <[email protected]> Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Acked-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf json: Add s390 transaction counter definitionThomas Richter3-0/+21
'perf stat' displays transactional counters using flag -T on x86. On s390 use a JSON file defined metric named transaction to achieve the same result. Output before: none Output after: [root@s35lp76 perf]# ./perf stat -M transaction -- \ ~/mytesttx 1 >/tmp/111 Performance counter stats for '/root/mytesttx 1': 1 tx_c_tend # 13.0 transaction 1 tx_nc_tend 11 tx_nc_tabort 0 tx_c_tabort_special 0 tx_c_tabort_no_special 0.001061232 seconds time elapsed [root@s35lp76 perf]# Suggested-by: Andi Kleen <[email protected]> Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf list: Add s390 support for detailed PMU event descriptionThomas Richter16-0/+324
Correct the support of detailed/verbose PMU event description by using the "Unit": keyword in the json files to address event names refering to the /sys/devices/cpum_[cs]f devices. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24Revert "perf list: Add s390 support for detailed/verbose PMU event description"Thomas Richter1-6/+0
This reverts commit 038586c34301578e538f6c5aa79ca82bce1b9152. Fix the support of detailed/verbose PMU event description by using the "Unit": keyword in the json files to address event names refering to the /sys/devices/cpum_[cs]f devices. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf cs-etm: Bail out immediately for instruction sample failureLeo Yan1-0/+3
If the instruction sample failure has happened, it isn't necessary to execute to the end of the function cs_etm__flush(). This commit is to bail out immediately and return the error code. Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Robert Walker <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf cs-etm: Introduce invalid address macroLeo Yan1-4/+6
This patch introduces invalid address macro and uses it to replace dummy value '0xdeadbeefdeadbeefUL'. Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Robert Walker <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf hists: Clarify callchain disabling when availableArnaldo Carvalho de Melo6-11/+11
We want to allow having mixed events with/without callchains, not using a global flag to show callchains, but allowing supressing callchains when they are present. So invert the logic of the last parameter to hists__fprint() to that effect. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24perf tests: Check that complex event name is parsed correctlyAlexey Budankov1-0/+18
Extend regression testing to cover case of complex event names enabled by the cset f92da71280fb ("perf record: Enable arbitrary event names thru name= modifier"). Testing it: # perf test 1: vmlinux symtab matches kallsyms : Skip 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Test data source output : Ok 6: Parse event definition strings : Ok <===! 7: Simple expression parser : Ok ... Committer testing: # perf test "event definition" 6: Parse event definition strings : Ok # perf test -v 6 2> /tmp/before # perf test -v 6 2> /tmp/after # diff -u /tmp/before /tmp/after --- /tmp/before 2018-06-19 10:50:21.485572638 -0300 +++ /tmp/after 2018-06-19 10:50:40.886572896 -0300 @@ -1,6 +1,6 @@ 6: Parse event definition strings : --- start --- -test child forked, pid 24259 +test child forked, pid 24904 running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-3D registering plugin: /root/.traceevent/plugins/plugin_kvm.so registering plugin: /root/.traceevent/plugins/plugin_hrtimer.so @@ -136,9 +136,11 @@ running test 50 '4:0x6530160/name=numpmu/' running test 51 'L1-dcache-misses/name=cachepmu/' running test 52 'intel_pt//u' +running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk' running test 0 'cpu/config=10,config1,config2=3,period=1000/u' running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u' running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/' +running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp' el-capacity -> cpu/event=0x54,umask=0x2/ el-conflict -> cpu/event=0x54,umask=0x1/ el-start -> cpu/event=0xc8,umask=0x1/ # Signed-off-by: Alexey Budankov <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-24Merge remote-tracking branch 'tip/perf/urgent' into perf/coreArnaldo Carvalho de Melo27-102/+268
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-16perf, tools: Use correct articles in commentsTobias Tefke2-3/+3
Some of the comments in the perf events code use articles incorrectly, using 'a' for words beginning with a vowel sound, where 'an' should be used. Signed-off-by: Tobias Tefke <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] [ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ] Signed-off-by: Ingo Molnar <[email protected]>
2018-07-13Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds14-81/+84
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tool fixes from Ingo Molnar: "Misc tooling fixes: python3 related fixes, gcc8 fix, bashism fixes and some other smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Use python-config --includes rather than --cflags perf script python: Fix dict reference counting perf stat: Fix --interval_clear option perf tools: Fix compilation errors on gcc8 perf test shell: Prevent temporary editor files from being considered test scripts perf llvm-utils: Remove bashism from kernel include fetch script perf test shell: Make perf's inet_pton test more portable perf test shell: Replace '|&' with '2>&1 |' to work with more shells perf scripts python: Add Python 3 support to EventClass.py perf scripts python: Add Python 3 support to sched-migration.py perf scripts python: Add Python 3 support to Util.py perf scripts python: Add Python 3 support to SchedGui.py perf scripts python: Add Python 3 support to Core.py perf tools: Generate a Python script compatible with Python 2 and 3
2018-07-13tools: build: Fixup host c flagsLaura Abbott1-1/+1
Commit 0c3b7e42616f ("tools build: Add support for host programs format") introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the variable is HOSTCFLAGS. Fix this up. Fixes: 0c3b7e42616f ("tools build: Add support for host programs format") Signed-off-by: Laura Abbott <[email protected]> Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-11perf tools: Use python-config --includes rather than --cflagsJeremy Cline1-2/+1
Builds started failing in Fedora on Python 3.7 with: `.gnu.debuglto_.debug_macro' referenced in section `.gnu.debuglto_.debug_macro' of util/scripting-engines/trace-event-python.o: defined in discarded section In Fedora, Python 3.7 added -flto to the list of --cflags and since it was only applied to util/scripting-engines/trace-event-python.c and scripts/python/Perf-Trace-Util/Context.c, linking failed. It's not the first time the addition of flags has broken builds: commit c6707fdef7e2 ("perf tools: Fix up build in hardnened environments") appears to have fixed a similar problem. "python-config --includes" provides the proper -I flags and doesn't introduce additional CFLAGS. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf script python: Fix dict reference countingJanne Huttunen1-6/+2
The dictionaries are attached to the parameter tuple that steals the references and takes care of releasing them when appropriate. The code should not decrement the reference counts explicitly. E.g. if libpython has been built with reference debugging enabled, the superfluous DECREFs will trigger this error when running perf script: Fatal Python error: Objects/tupleobject.c:238 object at 0x7f10f2041b40 has negative ref count -1 Aborted (core dumped) If the reference debugging is not enabled, the superfluous DECREFs might cause the dict objects to be silently released while they are still in use. This may trigger various other assertions or just cause perf crashes and/or weird and unexpected data changes in the stored Python objects. Signed-off-by: Janne Huttunen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jaroslav Skarvada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf stat: Fix --interval_clear optionJiri Olsa1-1/+1
Currently we display extra header line, like: # perf stat -I 1000 -a --interval-clear # time counts unit events insn per cycle branch-misses of all branches 2.964917103 3855.349912 cpu-clock (msec) # 3.855 CPUs utilized 2.964917103 23,993 context-switches # 0.006 M/sec 2.964917103 1,301 cpu-migrations # 0.329 K/sec ... Fixing the condition and getting proper: # perf stat -I 1000 -a --interval-clear # time counts unit events 2.359048938 1432.492228 cpu-clock (msec) # 1.432 CPUs utilized 2.359048938 7,613 context-switches # 0.002 M/sec 2.359048938 419 cpu-migrations # 0.133 K/sec ... Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: 9660e08ee8cb ("perf stat: Add --interval-clear option") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf tools: Fix compilation errors on gcc8Jiri Olsa2-2/+3
We are getting following warnings on gcc8 that break compilation: $ make CC jvmti/jvmti_agent.o jvmti/jvmti_agent.c: In function ‘jvmti_open’: jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \ writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=] snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); There's no point in checking the result of snprintf call in jvmti_open, the following open call will fail in case the name is mangled or too long. Using tools/lib/ function scnprintf that touches the return value from the snprintf() calls and thus get rid of those warnings. $ make DEBUG=1 CC arch/x86/util/perf_regs.o arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’: arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul copying 2 bytes from a string of the same length [-Werror=stringop-truncation] strncpy(prefix, "+0", 2); ^~~~~~~~~~~~~~~~~~~~~~~~ Using scnprintf instead of the strncpy (which we know is safe in here) to get rid of that warning. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf test shell: Prevent temporary editor files from being considered test ↵Kim Phillips1-1/+1
scripts Allows a perf shell test developer to concurrently edit and run their test scripts, avoiding perf test attempts to execute their editor temporary files, such as seen here: $ sudo taskset -c 0 ./perf test -vvvvvvvv -F 63 63: 0VIM 8.0 : --- start --- sh: 1: ./tests/shell/.record+probe_libc_inet_pton.sh.swp: Permission denied ---- end ---- 0VIM 8.0: FAILED! Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf llvm-utils: Remove bashism from kernel include fetch scriptKim Phillips1-3/+3
Like system(), popen() calls /bin/sh, which may/may not be bash. Script when run on dash and encounters the line, yields: exit: Illegal number: -1 checkbashisms report on script content: possible bashism (exit|return with negative status code): exit -1 Remove the bashism and use the more portable non-zero failure status code 1. Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf test shell: Make perf's inet_pton test more portableKim Phillips1-16/+21
Debian based systems such as Ubuntu have dash as their default shell. Even if the normal or root user's shell is bash, certain scripts still call /bin/sh, which points to dash, so we fix this perf test by rewriting it in a more portable way. BEFORE: $ sudo perf test -v 64 64: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 31942 ./tests/shell/record+probe_libc_inet_pton.sh: 18: ./tests/shell/record+probe_libc_inet_pton.sh: expected[0]=ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\): not found ./tests/shell/record+probe_libc_inet_pton.sh: 19: ./tests/shell/record+probe_libc_inet_pton.sh: expected[1]=.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so|inlined\)$: not found ./tests/shell/record+probe_libc_inet_pton.sh: 29: ./tests/shell/record+probe_libc_inet_pton.sh: expected[2]=getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so\)$: not found ./tests/shell/record+probe_libc_inet_pton.sh: 30: ./tests/shell/record+probe_libc_inet_pton.sh: expected[3]=.*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$: not found ping 31963 [004] 83577.670613: probe_libc:inet_pton: (7fe15f87f4b0) ./tests/shell/record+probe_libc_inet_pton.sh: 39: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution ./tests/shell/record+probe_libc_inet_pton.sh: 41: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution test child finished with -2 ---- end ---- probe libc's inet_pton & backtrace it with ping: Skip AFTER: $ sudo perf test -v 64 64: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 32277 ping 32295 [001] 83679.690020: probe_libc:inet_pton: (7ff244f504b0) 7ff244f504b0 __GI___inet_pton+0x0 (/lib/x86_64-linux-gnu/libc-2.27.so) 7ff244f14ce4 getaddrinfo+0x124 (/lib/x86_64-linux-gnu/libc-2.27.so) 556ac036b57d _init+0xb75 (/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf test shell: Replace '|&' with '2>&1 |' to work with more shellsKim Phillips1-1/+1
Since we do not specify bash (and/or zsh) as a requirement, use the standard error redirection that is more widely supported. BEFORE: $ sudo perf test -v 62 62: Check open filename arg using perf trace + vfs_getname: --- start --- test child forked, pid 27305 ./tests/shell/trace+probe_vfs_getname.sh: 20: ./tests/shell/trace+probe_vfs_getname.sh: Syntax error: "&" unexpected test child finished with -2 ---- end ---- Check open filename arg using perf trace + vfs_getname: Skip AFTER: $ sudo perf test -v 62 64: Check open filename arg using perf trace + vfs_getname : --- start --- test child forked, pid 23008 Added new event: probe:vfs_getname (on getname_flags:72 with pathname=result->name:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 0.361 ( 0.008 ms): touch/23032 openat(dfd: CWD, filename: /tmp/temporary_file.VEh0n, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 4 test child finished with 0 ---- end ---- Check open filename arg using perf trace + vfs_getname: Ok Similar to commit 35435cd06081, with the same title. Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandipan Das <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf scripts python: Add Python 3 support to EventClass.pyJeremy Cline1-1/+3
Support both Python 2 and Python 3 in EventClass.py. ``print`` is now a function rather than a statement. This should have no functional change. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Herton Krzesinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/0100016341a73aac-e0734bdc-dcab-4c61-8333-d8be97524aa0-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf scripts python: Add Python 3 support to sched-migration.pyJeremy Cline1-5/+9
Support both Python 2 and Python 3 in the sched-migration.py script. This should have no functional change. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Herton Krzesinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/0100016341a737a5-44ec436f-3440-4cac-a03f-ddfa589bf308-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf scripts python: Add Python 3 support to Util.pyJeremy Cline1-5/+6
Support both Python 2 and Python 3 in Util.py. The dict class no longer has a ``has_key`` method and print is now a function rather than a statement. This should have no functional change. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Herton Krzesinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/0100016341a730c6-8db8b9b1-da2d-4ee3-96bf-47e0ae9796bd-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf scripts python: Add Python 3 support to SchedGui.pyJeremy Cline1-1/+1
Fix a single syntax error in SchedGui.py to support both Python 2 and Python 3. This should have no functional change. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Herton Krzesinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/0100016341a72d26-75729663-fe55-4309-8c9b-302e065ed2f1-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf scripts python: Add Python 3 support to Core.pyJeremy Cline1-23/+17
Support both Python 2 and Python 3 in Core.py. This should have no functional change. Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Herton Krzesinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/0100016341a72ebe-e572899e-f445-4765-98f0-c314935727f9-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-07-11perf tools: Generate a Python script compatible with Python 2 and 3Jeremy Cline1-14/+15
When generating a Python script with "perf script -g python", produce one that is compatible with Python 2 and 3. The difference between the two generated scripts is: --- python2-perf-script.py 2018-05-08 15:35:00.865889705 -0400 +++ python3-perf-script.py 2018-05-08 15:34:49.019789564 -0400 @@ -7,6 +7,8 @@ # be retrieved using Python functions of the form common_*(context). # See the perf-script-python Documentation for the list of available functions. +from __future__ import print_function + import os import sys @@ -18,10 +20,10 @@ def trace_begin(): - print "in trace_begin" + print("in trace_begin") def trace_end(): - print "in trace_end" + print("in trace_end") def raw_syscalls__sys_enter(event_name, context, common_cpu, common_secs, common_nsecs, common_pid, common_comm, @@ -29,26 +31,26 @@ print_header(event_name, common_cpu, common_secs, common_nsecs, common_pid, common_comm) - print "id=%d, args=%s" % \ - (id, args) + print("id=%d, args=%s" % \ + (id, args)) - print 'Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}' + print('Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}') for node in common_callchain: if 'sym' in node: - print "\t[%x] %s" % (node['ip'], node['sym']['name']) + print("\t[%x] %s" % (node['ip'], node['sym']['name'])) else: - print " [%x]" % (node['ip']) + print(" [%x]" % (node['ip'])) - print "\n" + print() def trace_unhandled(event_name, context, event_fields_dict, perf_sample_dict): - print get_dict_as_string(event_fields_dict) - print 'Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}' + print(get_dict_as_string(event_fields_dict)) + print('Sample: {'+get_dict_as_string(perf_sample_dict['sample'], ', ')+'}') def print_header(event_name, cpu, secs, nsecs, pid, comm): - print "%-20s %5u %05u.%09u %8u %-20s " % \ - (event_name, cpu, secs, nsecs, pid, comm), + print("%-20s %5u %05u.%09u %8u %-20s " % \ + (event_name, cpu, secs, nsecs, pid, comm), end="") def get_dict_as_string(a_dict, delimiter=' '): return delimiter.join(['%s=%s'%(k,str(v))for k,v in sorted(a_dict.items())]) Signed-off-by: Jeremy Cline <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Herton Krzesinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/0100016341a7278a-d178c724-2b0f-49ca-be93-80a7d51aaa0d-000000@email.amazonses.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.