| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Using sizeof on a malloced pointer type will return the wordsize which
can often cause one to allocate a buffer much smaller than it is needed.
So, here do not use sizeof on pointer type.
Note that this has no effect on runtime because 'dsos' is a pointer to a
pointer.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With 'perf record --switch-output' without -a, record__synthesize() in
record__switch_output() won't generate tracking events because there's
no thread_map in evlist. Which causes newly created perf.data doesn't
contain map and comm information.
This patch creates a fake thread_map and directly call
perf_event__synthesize_thread_map() for those events.
Signed-off-by: Wang Nan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: He Kuang <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The cost of buildid cache processing is high: reading all events in
output perf.data, opening each elf file to read buildids then copying
them into ~/.debug directory. In switch output mode, these heavy works
block perf from receiving perf events for too long.
Enable no-buildid and no-buildid-cache by default if --switch-output is
provided. Still allow user use --no-no-buildid to explicitly enable
buildid in this case.
Signed-off-by: Wang Nan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: He Kuang <[email protected]>
[ Updated man page ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Without this patch, the last output doesn't have timestamp appended if
--timestamp-filename is not explicitly provided. For example:
# perf record -a --switch-output &
[1] 11224
# kill -s SIGUSR2 11224
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622372823 ]
# fg
perf record -a --switch-output
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data (540 samples) ]
# ls -l
total 836
-rw------- 1 root root 33256 Dec 26 22:37 perf.data <---- *Odd*
-rw------- 1 root root 817156 Dec 26 22:37 perf.data.2015122622372823
Signed-off-by: Wang Nan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: He Kuang <[email protected]>
[ Updated man page, that also got an entry for --timestamp-filename ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Allow 'perf record' to split its output into multiple files.
For example:
# ~/perf record -a --timestamp-filename --switch-output &
[1] 10763
# kill -s SIGUSR2 10763
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622314468 ]
# kill -s SIGUSR2 10763
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622314762 ]
# kill -s SIGUSR2 10763
[ perf record: dump data: Woken up 1 times ]
#[ perf record: Dump perf.data.2015122622315171 ]
# fg
perf record -a --timestamp-filename --switch-output
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Dump perf.data.2015122622315513 ]
[ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ]
# ls -l
total 920
-rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468
-rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762
-rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171
-rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513
Signed-off-by: Wang Nan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: He Kuang <[email protected]>
[ Added man page entry, used the re-synthesize patch in this series as a fixup ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
auxtrace_snapshot_state matches the trigger model. Use trigger to
implement it. auxtrace_snapshot_state and auxtrace_snapshot_err are
absorbed.
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: He Kuang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use 'trigger' to model operations which need to be executed when an
event (a signal, for example) is observed.
States and transits:
OFF--(on)--> READY --(hit)--> HIT
^ |
| (ready)
| |
\_____________/
is_hit and is_ready are two key functions to query the state of a
trigger. is_hit means the event already happen; is_ready means the
trigger is waiting for the event.
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: He Kuang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Replace many fixed-length char array with strbuf to stringify
perf_probe_event and probe_trace_event etc.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20160427183713.23446.97377.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The error messages returned by this method should not have an ending
newline, fix the two cases where it was.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When the kernel allows tweaking perf_event_max_stack and the event being
setup has PERF_SAMPLE_CALLCHAIN in its perf_event_attr.sample_type, tell
the user that tweaking /proc/sys/kernel/perf_event_max_stack may solve
the problem.
Before:
# echo 32000 > /proc/sys/kernel/perf_event_max_stack
# perf record -g usleep 1
Error:
The sys_perf_event_open() syscall returned with 12 (Cannot allocate memory) for event (cycles:ppp).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
#
After:
# echo 64000 > /proc/sys/kernel/perf_event_max_stack
# perf record -g usleep 1
Error:
Not enough memory to setup event with callchain.
Hint: Try tweaking /proc/sys/kernel/perf_event_max_stack
Hint: Current value: 64000
#
Suggested-by: David Ahern <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
/proc/sys/kernel/perf_event_max_stack
There is an upper limit to what tooling considers a valid callchain,
and it was tied to the hardcoded value in the kernel,
PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl,
make it read it and use that as the upper limit, falling back to
PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present.
Cc: Adrian Hunter <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Propagate the error instead.
Cc: David Ahern <[email protected]>
Cc: Hitoshi Mitake <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Introduced in commit 4babf2c5efb7 ("x86: wire up preadv2 and pwritev2").
This will make 'perf trace' aware of them.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Perf is not able to register probe in kernel module when dwarf supprt
is not there(and so it goes for symtab). Perf passes full path of
module where only module name is required which is causing the problem.
This patch fixes this issue.
Before applying patch:
$ dpkg -s libdw-dev
dpkg-query: package 'libdw-dev' is not installed and no information is...
$ sudo ./perf probe -m /linux/samples/kprobes/kprobe_example.ko kprobe_init
Added new event:
probe:kprobe_init (on kprobe_init in /linux/samples/kprobes/kprobe_example.ko)
You can now use it in all perf tools, such as:
perf record -e probe:kprobe_init -aR sleep 1
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/kprobe_init /linux/samples/kprobes/kprobe_example.ko:kprobe_init
$ sudo ./perf record -a -e probe:kprobe_init
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data ]
$ sudo ./perf script # No output here
After applying patch:
$ sudo ./perf probe -m /linux/samples/kprobes/kprobe_example.ko kprobe_init
Added new event:
probe:kprobe_init (on kprobe_init in kprobe_example)
You can now use it in all perf tools, such as:
perf record -e probe:kprobe_init -aR sleep 1
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/kprobe_init kprobe_example:kprobe_init
$ sudo ./perf record -a -e probe:kprobe_init
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data (2 samples) ]
$ sudo ./perf script
insmod 13990 [002] 5961.216833: probe:kprobe_init: ...
insmod 13995 [002] 5962.889384: probe:kprobe_init: ...
Signed-off-by: Ravi Bangoria <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/1461680741-12517-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Perf can add a probe on kernel module which has not been loaded yet.
The current implementation finds the module name from path. But if the
filename is different from the actual module name then perf fails to
register a probe while loading module because of mismatch in the names.
For example, samples/kobject/kobject-example.ko is loaded as
kobject_example.
Before applying patch:
$ sudo ./perf probe -m /linux/samples/kobject/kobject-example.ko foo_show
Added new event:
probe:foo_show (on foo_show in kobject-example)
You can now use it in all perf tools, such as:
perf record -e probe:foo_show -aR sleep 1
$ cat /sys/kernel/debug/tracing/kprobe_events
p:probe/foo_show kobject-example:foo_show
$ insmod kobject-example.ko
$ lsmod
Module Size Used by
kobject_example 16384 0
Generate read to /sys/kernel/kobject_example/foo while recording data
with below command
$ sudo ./perf record -e probe:foo_show -a
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.093 MB perf.data ]
$./perf report --stdio -F overhead,comm,dso,sym
Error:
The perf.data.old file has no samples!
After applying patch:
$ sudo ./perf probe -m /linux/samples/kobject/kobject-example.ko foo_show
Added new event:
probe:foo_show (on foo_show in kobject_example)
You can now use it in all perf tools, such as:
perf record -e probe:foo_show -aR sleep 1
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/foo_show kobject_example:foo_show
$ insmod kobject-example.ko
$ lsmod
Module Size Used by
kobject_example 16384 0
Generate read to /sys/kernel/kobject_example/foo while recording data
with below command
$ sudo ./perf record -e probe:foo_show -a
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.097 MB perf.data (8 samples) ]
$ sudo ./perf report --stdio -F overhead,comm,dso,sym
...
# Samples: 8 of event 'probe:foo_show'
# Event count (approx.): 8
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ............
#
100.00% cat [kobject_example] [k] foo_show
Signed-off-by: Ravi Bangoria <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/1461680741-12517-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We get notifications for threads that gets created while we're tracing,
but for preexisting threads we may end not having synthesized them, like
when tracing a 'perf trace' session that will use '--pid' to trace some
other thread.
And besides we should probably stop synthesizing those records and
instead read thread information in a lazy way, i.e. just when we need,
like done in this patch:
Now the 'pid_t' argument in 'perf_event_open' gets translated to a COMM:
# perf trace -e perf_event_open perf stat -e cycles -p 31601
0.027 ( 0.027 ms): perf/23393 perf_event_open(attr_uptr: 0x2fdd0d8, pid: 31601 (abrt-dump-journ), cpu: -1, group_fd: -1, flags: FD_CLOEXEC)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
= 3
^C
And in other syscalls containing pid_t without thread->comm_set at the
time of the formatting.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Will be used for lazy comm loading in 'perf trace'.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Leave it alone so that it ends up assigned to SCA_PID via its type,
'pid_t', that will look up the pid on the machine thread rb_tree and
possibly find its COMM.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Set kprobe group name as "probe" if it is not given.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20160426090413.11891.95640.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since other methods return 0 if succeeded (or filedesc), let
probe_file__add_event() return 0 instead of the length of written bytes.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20160426090303.11891.18232.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As a utility function, add lsdir() which reads given directory and store
entry name into a strlist. lsdir accepts a filter function so that user
can filter out unneeded entries.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20160426090242.11891.79014.stgit@devbox
[ Do not use the 'dirname' it is used in some distros ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix a bug to close target elf file in get_text_start_address().
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20160426064737.1443.44093.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Don't read broken data after 'head' pointer.
Following commits will feed perf_evlist__mmap_read() with some 'head'
pointers not maintained by kernel. If 'head' pointer breaks an event, we
should avoid reading from the broken event. This can happen in backward
ring buffer.
For example:
old head
| |
V V
+---+------+----------+----+-----+--+
|..E|D....D|C........C|B..B|A....|E.|
+---+------+----------+----+-----+--+
'old' pointer points to the beginning of 'A' and trying read from it,
but 'A' has been overwritten. In this case, don't try to read from 'A',
simply return NULL.
Signed-off-by: Wang Nan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The accumulated period for dummy entry should also be 0. Otherwise, the
total overhead could be overcounted.
$ perf record -e '{LLC-load-misses,cpu/instructions/}' --call-graph=lbr ./tchain
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 21K of event 'anon group { LLC-load-misses, cpu/instructions/ }'
# Event count (approx.): 16313667937
#
# Children Self Command Shared Object Symbol
# ................ ................ ........... ................ ............................
#
4769.98% 0.01% 0.00% 0.01% tchain_edit [kernel.vmlinux] [k] update_fast_timekeeper
4356.18% 0.01% 0.00% 0.01% tchain_edit [kernel.vmlinux] [k] trigger_load_balance
3181.12% 0.01% 0.00% 0.01% tchain_edit [kernel.vmlinux] [k] irq_work_tick
1592.37% 0.00% 0.00% 0.00% tchain_edit [kernel.vmlinux] [k] cpu_needs_another_gp
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The check for the maximum code is off-by-one; the current comparison of
a code that is INTEL_PT_ERR_MAX will cause the strlcpy to perform an out
of bounds array access on the intel_pt_err_msgs array.
Fix this with a >= comparison.
Signed-off-by: Colin Ian King <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Given that the 'val' parameter is ignored for FUTEX_LOCK_PI, get rid of
the bogus deadlock detection flag in the wrapper code and avoid the
extra argument, making it resemble its unlock counterpart. And if
nothing else, we already only pass 0 anyway.
Signed-off-by: Davidlohr Bueso <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current assert check is checking an assignment, which will always be
true. Instead, the assert should be checking if scale is equal to 0.122
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Signed-off-by: Eric Engestrom <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Turn current clean output:
$ make clean
rm -f arch/x86/include/generated/asm/syscalls_64.c
CLEAN libbpf
CLEAN libapi
into:
$ make clean
CLEAN x86
CLEAN libapi
CLEAN libbpf
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: TJ <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
While trying to use --call-graph lbr in 'perf trace', since we only are
interested in the callchain for userspace, up to the callchain, I found
that 'perf evlist' is not decoding the branch_sample_type field, fix it.
Before:
# perf record --call-graph lbr usleep 1
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK,
disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1,
comm_exec: 1, branch_sample_type: 51201
^^^^^^^^^^^^^^^^^^^^^^^^^
After:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK,
disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1,
comm_exec: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To check deeply nested page fault callchains.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This fixes a bug caused by an unitialized callchain cursor. The crash
frist appeared in:
6f736735e30f ("perf evsel: Require that callchains be resolved before
calling fprintf_{sym,callchain}")
The callchain cursor is a struct that contains pointers, that when
uninitialized will cause unpredictable behavior (usually a crash)
when trying to append to the callchain.
The existing implementation has the following issues:
1. The callchain cursor used is not initialized, resulting in
unpredictable behavior when used.
2. The cursor is declared on the stack. Even if it is properly initalized,
the implmentation will leak memory when the function returns,
since all the references to the callchain_nodes allocated by
callchain_cursor_append will be lost when the cursor goes out of
scope.
3. Storing the cursor on the stack is inefficient. Even if memory is
properly freed when it goes out of scope, a performance penalty
will be incurred due to reallocation of callchain nodes.
callchain_cursor_append is designed to avoid these reallocations
when an existing cursor is reused.
This patch fixes the crash by replacing cursor_callchain with a reference
to the global callchain_cursor which also resolves all 3 issues mentioned
above.
How to reproduce the crash:
$ perf record --call-graph=dwarf stress -t 1 -c 1
$ perf script > /dev/null
Segfault
Signed-off-by: Chris Phlipot <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: 6f736735e30f ("perf evsel: Require that callchains be resolved before calling fprintf_{sym,callchain}")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Forgot about page faults, a software event, when adding support for callchains,
fix it:
# trace --no-syscalls --pf maj --call dwarf
0.000 ( 0.000 ms): Xorg/2068 majfault [sfbSegment1+0x0] => /usr/lib64/xorg/modules/drivers/intel_drv.so@0x11b490 (x.)
sfbSegment1+0x0 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
fbPolySegment32+0x361 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
sna_poly_segment+0x743 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
damagePolySegment+0x77 (/usr/libexec/Xorg)
ProcPolySegment+0xe7 (/usr/libexec/Xorg)
Dispatch+0x25f (/usr/libexec/Xorg)
dix_main+0x3c3 (/usr/libexec/Xorg)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/libexec/Xorg)
0.257 ( 0.000 ms): Xorg/2068 majfault [miZeroClipLine+0x0] => /usr/libexec/Xorg@0x18e830 (x.)
miZeroClipLine+0x0 (/usr/libexec/Xorg)
_fbSegment+0x2c0 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
sfbSegment1+0x67 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
fbPolySegment32+0x361 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
sna_poly_segment+0x743 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
damagePolySegment+0x77 (/usr/libexec/Xorg)
ProcPolySegment+0xe7 (/usr/libexec/Xorg)
Dispatch+0x25f (/usr/libexec/Xorg)
dix_main+0x3c3 (/usr/libexec/Xorg)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/libexec/Xorg)
^C#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Prep work for next patches, where we'll need access to the created
evsels, to possibly configure callchains.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
write_buildid() increments 'name_len' with intention to take into
account trailing zero byte. However, 'name_len' was already incremented
in machine__write_buildid_table() before. So this leads to
out-of-bounds read in do_write():
$ ./perf record sleep 0
[ perf record: Woken up 1 times to write data ]
=================================================================
==15899==ERROR: AddressSanitizer: global-buffer-overflow on address 0x00000099fc92 at pc 0x7f1aa9c7eab5 bp 0x7fff940f84d0 sp 0x7fff940f7c78
READ of size 19 at 0x00000099fc92 thread T0
#0 0x7f1aa9c7eab4 (/usr/lib/gcc/x86_64-pc-linux-gnu/5.3.0/libasan.so.2+0x44ab4)
#1 0x649c5b in do_write util/header.c:67
#2 0x649c5b in write_padded util/header.c:82
#3 0x57e8bc in write_buildid util/build-id.c:239
#4 0x57e8bc in machine__write_buildid_table util/build-id.c:278
...
0x00000099fc92 is located 0 bytes to the right of global variable '*.LC99' defined in 'util/symbol.c' (0x99fc80) of size 18
'*.LC99' is ascii string '[kernel.kallsyms]'
...
Shadow bytes around the buggy address:
0x00008012bf80: f9 f9 f9 f9 00 00 00 00 00 00 03 f9 f9 f9 f9 f9
=>0x00008012bf90: 00 00[02]f9 f9 f9 f9 f9 00 00 00 00 00 05 f9 f9
0x00008012bfa0: f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Remove the off-by one at the origin, to keep len(s) == strlen(s) assumption ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Build fixes:
- Fix 'perf trace' build when DWARF unwind isn't available (Arnaldo Carvalho de Melo)
- Remove x86 references from arch-neutral Build, fixing it in !x86 arches,
reported as breaking the build for powerpc64le in linux-next (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Do memset() variable 'st' using the correct size in the jit code (Colin Ian King)
- Fix postgresql ubuntu 'perf script' install instructions (Chris Phlipot)
- Use callchain_param more thoroughly when checking how callchains were
configured, eventually will be the only way to look for callchain parameters
(Arnaldo Carvalho de Melo)
- Fix some issues in the 'perf test kallsyms' entry (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add sample_reg_mask array with pt_regs registers.
This is needed for printing supported regs ( -I? option).
Signed-off-by: Madhavan Srinivasan <[email protected]>
Acked-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
Map ID values with corresponding register names. These names are then
displayed when user issues perf record with the -I option
followed by perf report/script with -D option.
To test this patchset, Eg:
$ perf record -I ls # record machine state at interrupt
$ perf script -D # read the perf.data file
Sample output obtained for this patch / output looks like as follows:
496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522:
0xc0000000001e538c period: 1 addr: 0
... intr regs: mask 0x7ffffffffff ABI 64-bit
.... r0 0xc0000000001e5e34
.... r1 0xc000000fe733f9a0
.... r2 0xc000000001523100
.... r3 0xc000000ffaadeb60
.... r4 0xc000000003456800
.... r5 0x73a9b5e000
.... r6 0x1e000000
.... r7 0x0
.... r8 0x0
.... r9 0x0
.... r10 0x1
.... r11 0x0
.... r12 0x24022822
.... r13 0xc00000000feec180
.... r14 0x0
.... r15 0xc000001e4be18800
.... r16 0x0
.... r17 0xc000000ffaac5000
.... r18 0xc000000fe733f8a0
.... r19 0xc000000001523100
.... r20 0xc00000000009fd1c
.... r21 0xc000000fcaa69000
.... r22 0xc0000000001e4968
.... r23 0xc000000001523100
.... r24 0xc000000fe733f850
.... r25 0xc000000fcaa69000
.... r26 0xc000000003b8fcf0
.... r27 0xfffffffffffffead
.... r28 0x0
.... r29 0xc000000fcaa69000
.... r30 0x1
.... r31 0x0
.... nip 0xc0000000001dd320
.... msr 0x9000000000009032
.... orig_r3 0xc0000000001e538c
.... ctr 0xc00000000009d550
.... link 0xc0000000001e5e34
.... xer 0x0
.... ccr 0x84022882
.... softe 0x0
.... trap 0xf01
.... dar 0x0
.... dsisr 0xf00040060000004
... thread: :4522:4522
...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9
:4522 4522 496.768515: 1 cycles: c0000000001e538c
.perf_event_context_sched_in (/boot/vmlinux)
Signed-off-by: Anju T <[email protected]>
Acked-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
One of the branches leading to an error had no debug message emitted,
fix it, the new lines are:
# perf test -v kallsyms
<SNIP>
0xffffffff81001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page
0xffffffff810691f0: diff name v: try_to_free_pud_page k: try_to_free_pmd_page
<SNIP>
0xffffffff8150bb20: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7
0xffffffff816bc7f0: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12
0xffffffff817bbb90: diff name v: __do_softirq k: __softirqentry_text_start
<SNIP>
This in turn exercises another bug, still under investigation, because those
aliases _are_ in kallsyms, with the same name...
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: ab414dcda8fa ("perf test: Fixup aliases checking in the 'vmlinux matches kallsyms' test")
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before:
# perf test -v kallsyms
<SNIP>
Maps only in vmlinux:
ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text
ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text
ffffffffa0000000-ffffffffa000c000 0 [fjes]
ffffffffa000c000-ffffffffa0017000 0 [video]
ffffffffa0017000-ffffffffa001c000 0 [grace]
<SNIP>
ffffffffa0a7f000-ffffffffa0ba5000 0 [xfs]
ffffffffa0ba5000-ffffffffffffffff 0 [veth]
Maps in vmlinux with a different name in kallsyms:
Maps only in kallsyms:
ffff880000100000-ffff88001000b000 80000103000 [kernel.kallsyms]
ffff88001000b000-ffff880100000000 8001000e000 [kernel.kallsyms]
ffff880100000000-ffffc90000000000 80100003000 [kernel.kallsyms]
<SNIP>
ffffffffa0000000-ffffffffff600000 7fffa0003000 [kernel.kallsyms]
ffffffffff600000-ffffffffffffffff 7fffff603000 [kernel.kallsyms]
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
After:
# perf test -v 1
1: vmlinux symtab matches kallsyms :
--- start ---
test child forked, pid 7058
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.6.0-rc1+/build/vmlinux for symbols
0xffffffff81076870: diff end addr for aesni_gcm_dec v: 0xffffffff810791f2 k: 0xffffffff81076902
0xffffffff81079200: diff end addr for aesni_gcm_enc v: 0xffffffff8107bb03 k: 0xffffffff81079292
0xffffffff8107e8d0: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffff81083e76 k: 0xffffffff8107e943
0xffffffff81083e80: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffff81089611 k: 0xffffffff81083ef3
0xffffffff81089990: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffff8108e7c4 k: 0xffffffff81089a03
0xffffffff8108e7d0: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffff810937ef k: 0xffffffff8108e843
Maps only in vmlinux:
ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text
ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text
Maps in vmlinux with a different name in kallsyms:
Maps only in kallsyms:
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 8e0cf965f95e ("perf symbols: Add support for reading from /proc/kcore")
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before the support for using /proc/kcore was introduced, the kallsyms
routines used /proc/modules and the first 'perf test' entry expected
finding maps for each module in the system, which is not the case with
the kcore code. Provide a way to ignore kcore files so that the test can
have its expectations met.
Improving the test to cover kcore files as well needs to be done.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It will already be dealt with generating the syscalltbl.c file in the
x86 arch specific Build files, namely via 'archheaders'.
This fixes the build on !x86 arches, as reported for powerpcle
Reported-by: Stephen Rothwell <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 1b700c997500 ("perf tools: Build syscall table .c header from kernel's syscall_64.tbl")
Link: http://lkml.kernel.org/r/[email protected]
[ Removed the syscalltbl.o altogether, as per Jiri's suggestion ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current code is memsetting the 'struct stat' variable 'st' with the size of
'stat' (which turns out to be 1 byte) rather than the size of variable 'sz'.
Committer notes:
sizeof(function) isn't valid, the result depends on the compiler used, with
gcc, enabling pedantic warnings we get:
$ cat sizeof_function.c
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <stdio.h>
int main(void)
{
printf("sizeof(stat)=%zd, stat=%p\n", sizeof(stat), stat);
return 0;
}
$ readelf -sW sizeof_function | grep -w stat
49: 0000000000400630 16 FUNC WEAK HIDDEN 13 stat
$ cc -pedantic sizeof_function.c -o sizeof_function
sizeof_function.c: In function ‘main’:
sizeof_function.c:8:46: warning: invalid application of ‘sizeof’ to a function type [-Wpointer-arith]
printf("sizeof(stat)=%zd, stat=%p\n", sizeof(stat), stat);
^
$ ./sizeof_function
sizeof(stat)=1, stat=0x400630
$
Standard C, section 6.5.3.4:
"The sizeof operator shall not be applied to an expression that has function
type or an incomplete type, to the parenthesized name of such a type,
or to an expression that designates a bit-field member."
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf
Signed-off-by: Colin Ian King <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Fixes: 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current instructions for setting up an Ubuntu system for using the
export-to-postgresql.py script are incorrect.
The instructions in the script have been updated to work on newer
versions of ubuntu.
-Add missing dependencies to apt-get command:
python-pyside.qtsql, libqt4-sql-psql
-Add '-s' option to createuser command to force the user to be a
superuser since the command doesn't prompt as indicated in the
current instructions.
Tested on: Ubuntu 14.04, Ubuntu 16.04(beta)
Signed-off-by: Chris Phlipot <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull a perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix segfault tracing transactions in Intel PT (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
One more step in the direction of using just callchain_param for
callchain parameters.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|